(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 sampai dengan 20:00 pada tanggal 16/6/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (WIB) 16/6/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square HSS End Mills（Machining Application：Inclined Cuts）

An online store for high speed steel square end mills. Divided into categories of square / roughing / high helical end mills. In MISUMI's e-catalog, specifications/dimensions of brand, blade diameter, blade length, shank diameter, total length, number of blades, compatible work materials, coating, etc. can be selected with one click, so you can easily find the desired carbide end mill.
[Misumi's High Speed Steel End Mill]
In addition to the difference in blade length from short size to long size, non-coated items from minimum φ1 to maximum φ50 are available in extensive sizes.

Search by specifying the lower class category

136 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

1
2
3
4
Next >>

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.

Days to Ship: 10 Day(s) or more
G Long End Mill, 4-Flute SL4GE

NACHI(FUJIKOSHI)

General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.

Days to Ship: 16 Day(s) or more
Super Hard, 2-Flute 2SE

NACHI(FUJIKOSHI)

A general-purpose end mill that can process anything from steel to stainless steel and aluminum.

Days to Ship: 12 Day(s) or more
G Standard End Mill, 4-Flute 4GE

NACHI(FUJIKOSHI)

It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.

Days to Ship: 16 Day(s) or more
High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

MISUMI

[Features]
·High-speed steel roughing uncoated short flute length type with optimum pitch width for coarse finishing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

4 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
G Long End Mill, 2-Flute SL2GE

NACHI(FUJIKOSHI)

Capable of machining from steel and stainless steel to aluminum. Suitable for grooving deep grooves or in deep locations.

Days to Ship: 16 Day(s) or more
G Standard End Mill, 2-Flute 2GE

NACHI(FUJIKOSHI)

[Features]
· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.
· It is suitable for side processing

Days to Ship: 12 Day(s) or more
2-flute, General-purpose, Long Type EDL

OSG

General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

Days to Ship: 2 Day(s) or more
End Mill (Multi-Flute Center Cut Long Type) CC-EML

OSG

General-purpose 4-flute end mill center cut long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

Days to Ship: 2 Day(s) or more
XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

OSG

Long shank end mill with 4 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

Days to Ship: 12 Day(s) or more
S-αM S-Coated Alpha Nick Regular Blade

SANKO MFG

Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.

Days to Ship: 17 Day(s) or more
SUSα for Stainless Steel Groove Processing

SANKO MFG

[Features]
· A flat nick type roughing end mill.
· Ideal for grooving of stainless steel.

Days to Ship: 12 Day(s) or more
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN

4 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut

MISUMI

[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

L (Long)
Days to Ship: 12 Day(s) or more
AG Mill, 4-Flute 4AGE

NACHI(FUJIKOSHI)

Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.

Days to Ship: 16 Day(s) or more
2-flute, General-purpose, Short Type EDS

OSG

High-speed steel square series.
Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
Coating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Helix angle: Standard helix (30 to 44°)

STOCK
Days to Ship: 1 Day(s) or more
2-flute Short Type EX-TIN-EDS

OSG

TiN coated general-purpose 2-flute short type end mill.

Days to Ship: 2 Day(s) or more
2-flute, General-purpose, Medium Type EDN

OSG

General-purpose 2-flute end mill medium type using cobalt high-speed steel as the base material.

Days to Ship: 8 Day(s) or more
V Coating XPM End Mill (2-flute short type) V-XPM-EDS

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Days to Ship: 2 Day(s) or more
V Coating XPM End Mill (4-flute short type) V-XPM-EMS

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Days to Ship: 2 Day(s) or more
TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS

OSG

[Features]
· Adopts TiN coating with excellent weld resistance and abrasion resistance.
· Those with outer diameter of 41 mm or more have center holes.

Days to Ship: 2 Day(s) or more
For 2-Flute Keyway EKD (OL3)

OSG

General-purpose 2-flute keyway end mill with a cutting diameter tolerance of -0.04 to -0.06.

Days to Ship: 12 Day(s) or more
SS4T S Coating STEC 4-Flute Short

SANKO MFG

[Features]
· 4-flute finishing endmill with TiCN coating.
· High grade powder metallurgy HSS with S-coating.
· Ideal for Finish Machining

Days to Ship: 10 Day(s) or more
SSα S Coating S-Tech α Nick

SANKO MFG

Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.

Days to Ship: 12 Day(s) or more
SSαM S Coating Estech α Nick Regular Flute

SANKO MFG

[Features]
· Semi-fine pitch type roughing endmill with TiCN coating.
· Extended periods of machining with hard-to-cut materials are possible.
· Enables a wide range of machining applications, due to the regular flute length.

Days to Ship: 16 Day(s) or more
αM α Nick Regular Flute

SANKO MFG

A standard pitch type roughing end mill. Enables a wide range of machining applications, due to the regular flute length.

Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut

MISUMI

The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

Volume Discount

AS

4 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut

MISUMI

The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

Volume Discount

AS

4 Flutes

R (Regular)
Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

MISUMI

The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

Volume Discount

AS

4 Flutes

L (Long)
Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut

MISUMI

The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

Volume Discount

AS

3 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

MISUMI

[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

MISUMI

[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

R (Regular)
Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

MISUMI

[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

L (Long)
Days to Ship: 12 Day(s) or more
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

MISUMI

[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

3 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN

4 Flutes

R (Regular)
Days to Ship: 12 Day(s) or more
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

MISUMI

[Features]
·High speed steel powder roughing long flute length type that can expect durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN

4 Flutes

L (Long)
Days to Ship: 12 Day(s) or more
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

MISUMI

[Features]
·Long shank type of high speed steel powder that can expect durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN

3 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut

MISUMI

[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut

MISUMI

[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

R (Regular)
Days to Ship: Same day or more
AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

MISUMI

[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

3 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

MISUMI

[Features]
·Uncoated short flute length type of high speed steel powder roughing that expect durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

4 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

MISUMI

[Features]
·High speed steel powder roughing uncoated regular flute length type that expect to durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

4 Flutes

R (Regular)
Days to Ship: 12 Day(s) or more
Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

MISUMI

[Features]
·High speed steel powder roughing uncoated long flute length type that can expect durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

MISUMI

[Features]
·Uncoated long shank blade length type of high speed steel powder roughing that can expect durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

MISUMI

[Features]
·High-speed steel roughing uncoated regular flute length type with optimum pitch width for coarse finishing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

4 Flutes

R (Regular)
Days to Ship: Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	17 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank


Brand	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	SANKO MFG	SANKO MFG	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Super Hard, 4-Flute 4SE	G Long End Mill, 4-Flute SL4GE	Super Hard, 2-Flute 2SE	G Standard End Mill, 4-Flute 4GE	High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model	G Long End Mill, 2-Flute SL2GE	G Standard End Mill, 2-Flute 2GE	2-flute, General-purpose, Long Type EDL	End Mill (Multi-Flute Center Cut Long Type) CC-EML	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	S-αM S-Coated Alpha Nick Regular Blade	SUSα for Stainless Steel Groove Processing	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut	AG Mill, 4-Flute 4AGE	2-flute, General-purpose, Short Type EDS	2-flute Short Type EX-TIN-EDS	2-flute, General-purpose, Medium Type EDN	V Coating XPM End Mill (2-flute short type) V-XPM-EDS	V Coating XPM End Mill (4-flute short type) V-XPM-EMS	TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS	For 2-Flute Keyway EKD (OL3)	SS4T S Coating STEC 4-Flute Short	SSα S Coating S-Tech α Nick	SSαM S Coating Estech α Nick Regular Flute	αM α Nick Regular Flute	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model	Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model	Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model	Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model	High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
Days to Ship	10 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	2 Day(s) or more	2 Day(s) or more	12 Day(s) or more	17 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	1 Day(s) or more	2 Day(s) or more	8 Day(s) or more	2 Day(s) or more	2 Day(s) or more	2 Day(s) or more	12 Day(s) or more	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	Same day or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more
Specifications					Non-Coated 4 Flutes S (Short)								TiCN 4 Flutes S (Short)	AS 4 Flutes L (Long)		STOCK											AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	AS 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	AS 3 Flutes S (Short)	TiCN 4 Flutes R (Regular)	TiCN 4 Flutes L (Long)	TiCN 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 3 Flutes S (Short)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 3 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)
Blade diameter (D)(φ)	2.5 ～ 50	3 ～ 40	1 ～ 50	2.5 ～ 50	5 ～ 50	3 ～ 40	1 ～ 50	0.8 ～ 40	3 ～ 40	8 ～ 50	10 ～ 50	3 ～ 30	6 ～ 32	10 ～ 50	2.5 ～ 50	0.45 ～ 60	0.8 ～ 50	1 ～ 20	1 ～ 40	2.5 ～ 40	2.5 ～ 40	3 ～ 25	3 ～ 40	5 ～ 40	5 ～ 50	10 ～ 50	6 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	5 ～ 32	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	5 ～ 50	6 ～ 50	6 ～ 30	5 ～ 30	6 ～ 30	10 ～ 25	6 ～ 30	6 ～ 50
Blade length (ℓ)(mm)	7 ～ 70	15 ～ 125	2 ～ 70	7 ～ 70	13 ～ 75	15 ～ 125	2 ～ 70	6 ～ 110	15 ～ 110	20 ～ 75	35 ～ 120	5 ～ 55	13 ～ 53	45 ～ 150	7 ～ 70	1.1 ～ 80	1.6 ～ 75	3.5 ～ 45	2.5 ～ 65	10 ～ 65	7 ～ 65	5 ～ 25	10 ～ 65	10 ～ 65	15 ～ 120	35 ～ 120	13 ～ 45	19 ～ 68	45 ～ 90	11 ～ 45	13 ～ 53	19 ～ 68	45 ～ 90	11 ～ 45	19 ～ 68	45 ～ 90	11 ～ 45	13 ～ 75	19 ～ 112	11 ～ 45	13 ～ 45	19 ～ 68	45 ～ 90	11 ～ 45	19 ～ 112
Shank diameter (d)(mm)	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 42	10 ～ 42	6 ～ 25	6 ～ 32	10 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 20	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 42	10 ～ 42	6 ～ 25	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 42
Number of flutes(sheet)	4	4	2	4	3 ～ 6	2	2	2	4	4	4 ～ 6	3 ～ 4	3 ～ 6	4 ～ 6	4	2	2	2	2	4	4	2	4	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 5	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 6	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 6	3 ～ 6	3 ～ 4	3 ～ 5	3 ～ 5	4	3 ～ 4	3 ～ 6
Overall Length (L)(mm)	50 ～ 160	60 ～ 210	50 ～ 160	50 ～ 160	57 ～ 177	60 ～ 210	50 ～ 160	50 ～ 195	60 ～ 195	80 ～ 350	100 ～ 240	55 ～ 165	57 ～ 133	95 ～ 252	50 ～ 160	45 ～ 170	45 ～ 165	45 ～ 110	50 ～ 165	55 ～ 165	50 ～ 150	50 ～ 95	50 ～ 150	70 ～ 185	80 ～ 220	100 ～ 240	57 ～ 121	63 ～ 144	95 ～ 166	80 ～ 160	57 ～ 133	63 ～ 144	95 ～ 166	80 ～ 160	63 ～ 144	95 ～ 166	80 ～ 160	57 ～ 177	63 ～ 214	80 ～ 160	57 ～ 121	63 ～ 144	95 ～ 166	80 ～ 160	63 ～ 214
work material	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Machining Application	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts
Coating	Non-Coated	TiN	Non-Coated	TiN	Non-Coated	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	TiCN	Non-Coated	TiCN	For High Hardness (Silicon Group)	AG	Non-Coated	TiN	Non-Coated	-	-	TiN	Non-Coated	TiCN	TiCN	TiCN	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade shape type	Square	Square	Square	Square	Roughing	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	-	-	-	-	Available	-	-	-	-	-	Available	Available	Available	Available	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	Straight	Straight	Straight	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

1
2
3
4
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

24

25

26

27

28

30

32

33

34

35

36

38

39

40

45

48

50

53

55

56

58

60

63

65

67

68

70

75

80

85

90

95

100

105

106

110

112

115

120

122

125

130

140

145

150

160

180

200

205

212

250

300
Drawing

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14

16

18
Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 86
  - 88
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 102
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 123
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 133
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 141
  - 142
  - 143
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 166
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 177
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 197
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 214
  - 215
- 220～227
  - 220
  - 222
  - 224
  - 225
  - 227
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 252
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 310～315
  - 310
  - 315
- 320
- 340～345
  - 340
  - 345
- 350
- 390
- 400
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Blade shape type
- Square
- Roughing
- For Keyway
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
Clear

Base Blade Y/N
- Available
- None
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Underneck length (ℓ1)(mm)
10

12

14

17

22

23

27

28

29

37

38

40

44

45

46

48

49

50

53

54

56

58

60

62

64

65

66

70

72

75

80

88

90

95

100

112

113

115
Drawing

Clear

shank
- Straight
Clear

Narrow search by specifying Manufacturer

- MISUMI (27)
- Economy series (0)
- OSG (53)
- SANKO MFG (36)
- NACHI(FUJIKOSHI) (19)
- MITSUBISHI MATERIALS (1)
- FUKUDA (0)
- ESCO (0)
- DAIICHITOOL (0)
- MITSUBISHI HITACHI TOOL (0)
- TAIYO-TOOL (0)
- ASAHI TOOLS (0)
- EIKOSHA (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square HSS End Mills

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square HSS End Mills（Machining Application：Inclined Cuts）

Search by specifying the lower class category

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square HSS End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square HSS End Mills（Machining Application：Inclined Cuts）

Search by specifying the lower class category

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square HSS End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB