(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (HSS)（Blade shape type：Square）

180 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

1
2
3
4
Next >>

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.

Days to Ship: 10 Day(s) or more
G Long End Mill, 4-Flute SL4GE

NACHI(FUJIKOSHI)

General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.

Days to Ship: 16 Day(s) or more
ESM End Mill, 2-Flute / Short Flute Length 2ESMS□□.□

MITSUBISHI HITACHI TOOL

[Applications]It can be used for side milling, counterbore milling, grooving, roughing, semi-finishing, and finishing. [Features]Powder metal high-speed steel with excellent abrasion resistance and toughness is used.

Days to Ship: 16 Day(s) or more
G Standard End Mill, 4-Flute 4GE

NACHI(FUJIKOSHI)

It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.

Days to Ship: 16 Day(s) or more
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
·High speed steel powder square long blade length type that can expect for durability
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

2 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
·High speed steel powder roughing long flute length type that can expect durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN

2 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
G Long End Mill, 2-Flute SL2GE

NACHI(FUJIKOSHI)

Capable of machining from steel and stainless steel to aluminum. Suitable for grooving deep grooves or in deep locations.

Days to Ship: 16 Day(s) or more
G Standard End Mill, 2-Flute 2GE

NACHI(FUJIKOSHI)

[Features]
· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.
· It is suitable for side processing

Days to Ship: 16 Day(s) or more
2-flute, General-purpose, Long Type EDL

OSG

General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

Days to Ship: 2 Day(s) or more
End Mill (Multi-Flute Center Cut Long Type) CC-EML

OSG

General-purpose 4-flute end mill center cut long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

Days to Ship: 2 Day(s) or more
End Mill (2-Flute Short Type for Aluminum) AL-EDS

OSG

2-flute end mill short type for aluminum alloys using cobalt high-speed steel as the base material.

Days to Ship: 2 Day(s) or more
ESM End Mill (for Stainless Steel) 2ESMSUS□□

MITSUBISHI HITACHI TOOL

[Applications]It can be used for side milling, counterbore milling, grooving, roughing, semi-finishing, and finishing. [Features]Powder metal high-speed steel with excellent abrasion resistance and toughness is used.

Days to Ship: 16 Day(s) or more
3S End Mill, 4-Flute (Standard Blade)

FUKUDA

Side cutting and groove re-polishing are easy

Days to Ship: 8 Day(s) or more
3S End Mill, 6-Flute (Standard Blade)

FUKUDA

Side cutting and groove re-polishing are easy

Days to Ship: 16 Day(s) or more
2-Flute Square End Mill for Aluminum 2AL□□

MITSUBISHI HITACHI TOOL

MOLDINO high speed square end mill. Ideal for aluminum processing.

Days to Ship: Quote
SS4T S Coating STEC 4-Flute Short

SANKO MFG

[Features]
· 4-flute finishing endmill with TiCN coating.
· High grade powder metallurgy HSS with S-coating.
· Ideal for Finish Machining

Days to Ship: 10 Day(s) or more
SS4TL S Coating S TECH 4-Flute Long Flute

SANKO MFG

[Features]
· 4-flute finishing endmill with TiCN coating.
· Enables a wide range of side machining and deep engraving, due to the long flute length.
· High grade powder metallurgy HSS with S-coating.

Days to Ship: 16 Day(s) or more
Straight Shank for SM Keyway

SANKO MFG

Endmill dedicated for key groove machining. The outer diameter tolerance is positive.

Days to Ship: 9 Day(s) or more
Shell end mill SE (SKH51)

TAIYO-TOOL

[Cutting Edge Shape Type]
· Square
[Tool Grade]
· High-speed steel
[Coating]
· Non-Coated

Days to Ship: 16 Day(s) or more
AS Coated High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
AG Mill, 2-Flute 2AGE

NACHI(FUJIKOSHI)

Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.

Days to Ship: 12 Day(s) or more
Super Hard, 2-Flute 2SE

NACHI(FUJIKOSHI)

A general-purpose end mill that can process anything from steel to stainless steel and aluminum.

Days to Ship: 12 Day(s) or more
AG Mill, 4-Flute 4AGE

NACHI(FUJIKOSHI)

Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.

Days to Ship: 16 Day(s) or more
2-flute, General-purpose, Short Type EDS

OSG

High-speed steel square series.
Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
Coating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Helix angle: Standard helix (30 to 44°)

STOCK
Days to Ship: 1 Day(s) or more
2-flute Short Type EX-TIN-EDS

OSG

TiN coated general-purpose 2-flute short type end mill.

Days to Ship: 2 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Quote

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	2 Day(s) or more

On Sale Till 31/03/2025

Short Type, 4-Flute Multi-Flute Center Cut CC-EMS

OSG

Cobalt high-speed steel center cut.
Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
Coating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.): 4
Helix angle: Standard helix (30 to 44°)

	Special Price
Days to Ship:	Same day or more

V Coating XPM End Mill (4-flute short type) V-XPM-EMS

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Days to Ship: 2 Day(s) or more
V Coating XPM End Mill (high-helix short type) V-XPM-EHS

OSG

High torsion type with great sharpness. Can be used for a wide range of applications from heavy cutting to finishing cutting.

Days to Ship: 2 Day(s) or more
XPM End Mill (Multi-Flute Long Type) XPM-EML

OSG

Multi-flute end mill long type using powder metal high-speed steel XPM as the base material. Suitable for deep cuts.

Days to Ship: 2 Day(s) or more
Multi-Flute Extra Long Type EXML

OSG

30 to 45° torsion cobalt HSS, extra long type end mill.

Days to Ship: 16 Day(s) or more
3S End Mill, 2-Flute Extra Long Blade

FUKUDA

Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

Days to Ship: 12 Day(s) or more
3S End Mill, 4-Flute Extra Long Blade

FUKUDA

Long blade for cutting such as deep grooving and wide widths Repolishing is easy

Days to Ship: 12 Day(s) or more
End Mill For Keyway / BS Shank (Negative Tolerance)

FUKUDA

Endmill dedicated for key groove machining. Negative blade diameter tolerance. BS shank.

Days to Ship: 16 Day(s) or more
AT Coat NE End Mill 4-Flute / Regular Flute Length

MITSUBISHI HITACHI TOOL

[Applications]It can be used for side milling, semi-finishing and finishing. [Features]Cobalt high-speed steel with abrasion resistance and high hardness is used.

Days to Ship: 8 Day(s) or more
LVS2T, 2-Flute Long Flute

SANKO MFG

A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

Days to Ship: 12 Day(s) or more
LVS2T, 4-Flute Long Flute

SANKO MFG

A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

Days to Ship: 12 Day(s) or more
BS Handle Spiral End Mill SPE-BS (SKH51)

TAIYO-TOOL

[Cutting Edge Shape Type]
· Square
[Tool Grade]
· High-speed steel
[Coating]
· Non-Coated

Days to Ship: 16 Day(s) or more
MT Pattern 2 Flute End Mill SLE-MT (SKH51)

TAIYO-TOOL

[Cutting Edge Shape Type]
· Square
[Tool Grade]
· High-speed steel
[Coating]
· Non-Coated
[Flute No.] 2-Flute

Days to Ship: 16 Day(s) or more
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·High speed steel powder square short blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
·High speed steel powder square regular blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing

Volume Discount

AS

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

MISUMI

[Features]
·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·High speed steel powder roughing short flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
·High speed steel powder roughing regular flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

																										On Sale Till 31/03/2025
Brand	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MITSUBISHI HITACHI TOOL	NACHI(FUJIKOSHI)	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	FUKUDA	FUKUDA	MITSUBISHI HITACHI TOOL	SANKO MFG	SANKO MFG	SANKO MFG	TAIYO-TOOL	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	FUKUDA	FUKUDA	FUKUDA	MITSUBISHI HITACHI TOOL	SANKO MFG	SANKO MFG	TAIYO-TOOL	TAIYO-TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Super Hard, 4-Flute 4SE	G Long End Mill, 4-Flute SL4GE	ESM End Mill, 2-Flute / Short Flute Length 2ESMS□□.□	G Standard End Mill, 4-Flute 4GE	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	G Long End Mill, 2-Flute SL2GE	G Standard End Mill, 2-Flute 2GE	2-flute, General-purpose, Long Type EDL	End Mill (Multi-Flute Center Cut Long Type) CC-EML	End Mill (2-Flute Short Type for Aluminum) AL-EDS	ESM End Mill (for Stainless Steel) 2ESMSUS□□	3S End Mill, 4-Flute (Standard Blade)	3S End Mill, 6-Flute (Standard Blade)	2-Flute Square End Mill for Aluminum 2AL□□	SS4T S Coating STEC 4-Flute Short	SS4TL S Coating S TECH 4-Flute Long Flute	Straight Shank for SM Keyway	Shell end mill SE (SKH51)	AS Coated High-Speed Steel Square End Mill, 2-Flute, Short	AG Mill, 2-Flute 2AGE	Super Hard, 2-Flute 2SE	AG Mill, 4-Flute 4AGE	2-flute, General-purpose, Short Type EDS	2-flute Short Type EX-TIN-EDS	Short Type, 4-Flute Multi-Flute Center Cut CC-EMS	V Coating XPM End Mill (4-flute short type) V-XPM-EMS	V Coating XPM End Mill (high-helix short type) V-XPM-EHS	XPM End Mill (Multi-Flute Long Type) XPM-EML	Multi-Flute Extra Long Type EXML	3S End Mill, 2-Flute Extra Long Blade	3S End Mill, 4-Flute Extra Long Blade	End Mill For Keyway / BS Shank (Negative Tolerance)	AT Coat NE End Mill 4-Flute / Regular Flute Length	LVS2T, 2-Flute Long Flute	LVS2T, 4-Flute Long Flute	BS Handle Spiral End Mill SPE-BS (SKH51)	MT Pattern 2 Flute End Mill SLE-MT (SKH51)	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
Days to Ship	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	2 Day(s) or more	2 Day(s) or more	2 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	Quote	10 Day(s) or more	16 Day(s) or more	9 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	1 Day(s) or more	2 Day(s) or more	Same day or more	2 Day(s) or more	2 Day(s) or more	2 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	8 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications					AS 2 Flutes L (Long)	TiCN 2 Flutes L (Long)														AS 2 Flutes S (Short)				STOCK															AS 2 Flutes S (Short)	AS 2 Flutes R (Regular)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	TiCN 2 Flutes S (Short)	TiCN 2 Flutes R (Regular)
Blade diameter (D)(φ)	2.5 ～ 50	3 ～ 40	1 ～ 20	2.5 ～ 50	3 ～ 20	3 ～ 25	3 ～ 40	1 ～ 50	0.8 ～ 40	3 ～ 40	1.5 ～ 30	1.5 ～ 30	3 ～ 100	50 ～ 100	4 ～ 10	3 ～ 40	3 ～ 40	3 ～ 25	38 ～ 100	1 ～ 50	1 ～ 50	1 ～ 50	2.5 ～ 50	0.45 ～ 60	0.8 ～ 50	2.5 ～ 40	2.5 ～ 40	3 ～ 30	3 ～ 40	3 ～ 40	0.8 ～ 60	3 ～ 60	3 ～ 12	2.5 ～ 30	3 ～ 50	3 ～ 60	3/4 ～ 56	1/2 ～ 51	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 40	1 ～ 25
Blade length (ℓ)(mm)	7 ～ 70	15 ～ 125	2.5 ～ 40	7 ～ 70	15 ～ 75	15 ～ 90	15 ～ 125	2 ～ 70	6 ～ 110	15 ～ 110	4 ～ 55	4 ～ 55	13 ～ 80	75 ～ 80	12 ～ 25	10 ～ 65	15 ～ 105	5 ～ 25	30 ～ 75	2.5 ～ 75	2 ～ 70	2 ～ 70	7 ～ 70	1.1 ～ 80	1.6 ～ 75	10 ～ 65	10 ～ 65	6 ～ 55	15 ～ 110	30 ～ 150	2.5 ～ 300	30 ～ 300	4.5 ～ 18	7 ～ 55	20 ～ 250	20 ～ 250	25 ～ 75	30 ～ 65	2.5 ～ 65	3.5 ～ 60	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 65	3.5 ～ 60
Shank diameter (d)(mm)	6 ～ 42	6 ～ 32	6 ～ 20	6 ～ 42	6 ～ 20	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 42	32 ～ 42	6 ～ 10	6 ～ 32	6 ～ 32	6 ～ 25	-	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 42	BS5	6 ～ 25	6 ～ 42	6 ～ 42	-	-	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25
Number of flutes(sheet)	4	4	2	4	2	2	2	2	2	4	2	2	4	6	2	4	4	2	10 ～ 18	2	2	2	4	2	2	4	4	3 ～ 4	4	4	2	4	2	4	2	4	6 ～ 14	2	2	2	4	4	4	2	2
Overall Length (L)(mm)	50 ～ 160	60 ～ 210	50 ～ 120	50 ～ 160	60 ～ 140	60 ～ 160	60 ～ 210	50 ～ 160	50 ～ 195	60 ～ 195	45 ～ 125	50 ～ 125	51 ～ 180	160 ～ 180	60 ～ 80	50 ～ 150	55 ～ 190	50 ～ 95	-	45 ～ 165	50 ～ 160	50 ～ 160	50 ～ 160	45 ～ 170	45 ～ 165	50 ～ 150	55 ～ 165	55 ～ 150	65 ～ 210	70 ～ 235	42 ～ 400	70 ～ 400	62 ～ 76	55 ～ 145	60 ～ 340	60 ～ 345	127 ～ 210	119 ～ 235.5	45 ～ 150	45 ～ 130	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 150	45 ～ 130
work material	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	-	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove	Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side	Groove	-	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Other	Side	Plane / Side	Plane / Side	-	-	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking
Coating	Non-Coated	TiN	Non-Coated	TiN	For High Hardness (Silicon Group)	TiCN	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	AG	Non-Coated	AG	Non-Coated	TiN	Non-Coated	-	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Other	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	-	-	Available	-	Available	Available	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	-	Available	-	-	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	-	-	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Alloy HSS	Alloy HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Alloy HSS	Alloy HSS	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

1
2
3
4
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 400
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
Clear

Base Blade Y/N
- Available
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Underneck length (ℓ1)(mm)
28

44

58

66
Drawing

Clear

shank
- Straight
Clear

Narrow search by specifying Manufacturer

- MISUMI (40)
- Economy series (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (HSS)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (HSS)（Blade shape type：Square）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (HSS)（Blade shape type：Square）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB