(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Straight Shank / End Mill Shank Drills (Carbide)（work material：Cast Iron）

173 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

1
2
3
4
Next >>

TiAlN Coated Carbide Drill, Regular

MISUMI

[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount
Days to Ship: Same day or more
BOTEK Gun Drill (Type with Cemented Carbide)

BOTEK

Days to Ship: 8 Day(s) or more
Aqua Drill 3-Flute AQD3F

NACHI(FUJIKOSHI)

3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

Days to Ship: 11 Day(s) or more
Aqua Drill EX Oil Hole 20D AQDEXOH20D

NACHI(FUJIKOSHI)

[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 20 times the drill diameter.

Days to Ship: 11 Day(s) or more
Carbide Drill 4D Type_AD-4D

OSG

[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 12 Day(s) or more
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

MISUMI

[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance

Volume Discount
Days to Ship: 16 Day(s) or more
Aqua Drill EX Flat AQDEXZ

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 10 Day(s) or more
Super Multi-Drill External Refueling, GS-Model 4D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
Super Long Drill

ATOM

ADS standard straight shank drill extra-long type.

Days to Ship: 12 Day(s) or more
EZ Drill (for 5D) EZDL Type

DIJET

It can handle a wide range of materials, from general steel to stainless steel and heat-resistant alloys, and has a structure that allows for smooth cutting chip discharge and easy regrinding.

Days to Ship: 12 Day(s) or more
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D

OSG

[Features]
· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 16 Day(s) or more
Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D

OSG

[Features]
· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holes

Days to Ship: 16 Day(s) or more
Carbide Burnishing Drill, Straight Model

MISUMI

[Features]
·Achieves high-precision drilling of aluminum without a pilot hole
·Tip diameter can be specified in units of 0.01 mm and groove length in units of 0.1 mm

Days to Ship: 18 Day(s) or more
Carbide OH Non-Step Borer 5D 05WHNSB□□□□-TH

MITSUBISHI HITACHI TOOL

The effects of the TH coating provide a long service life even at high speeds where cutting temperature increases

Days to Ship: 16 Day(s) or more
Solid Carbide Drill for Cast Iron / Nonferrous SSN

OKAZAKI SEIKO

It is a drill with X thinning shaped tip, suitable for drilling cast iron and nonferrous metals.

Days to Ship: 12 Day(s) or more
Carbide Twisted V Drill, Long Size for Models H7-H8

OMIKOGYO

For more precise, more efficient operation. Twisted V drill to support next generation high speed machining. A drill with oil hole that makes full use of state-of-the-art technology.

Days to Ship: 12 Day(s) or more
Flat Multi-Drill MDF Type External Lubrication 2D Type

SUMITOMO ELECTRIC HARDMETAL

[Features]
· As well as higher efficiency counterbore machining, this carbide solid drill can be used for various applications such as drilling inclined surfaces or curved surfaces.

Days to Ship: 16 Day(s) or more
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D

OSG

[Features]
· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

MISUMI

[Features]
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·Demonstrates high centripetal force by applying three rake and R-type thinning
·Designed with larger core diameter than that of TAC-ESDBA to improve durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Long Drill, Straight Shank

MISUMI

Carbide long drill that achieves the high efficiency deep-hole drilling

Volume Discount
Days to Ship: 12 Day(s) or more
Aqua Drill FC AQDFC

NACHI(FUJIKOSHI)

A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 3D AQDEXOH3D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Days to Ship: 11 Day(s) or more
Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS

OSG

Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components

Days to Ship: 2 Day(s) or more
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit

UNION TOOL

[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: Carbide

Days to Ship: 12 Day(s) or more
Super Multi-Drill Internal Refueling, HGS-Model 5D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
Standard Solid Drill with Coating

ATOM

ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 3-Flute 10D AQDEXOH3F10D

NACHI(FUJIKOSHI)

[Features]
· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.
· Capable of highly-efficient hole drilling up to 10 times the drill diameter.

Days to Ship: 11 Day(s) or more
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D

OSG

[Features]
· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work.
5D type with oil hole

Days to Ship: 16 Day(s) or more
VariDrill Solid Carbide Drill 8xD VDS403A

WIDIA

WIDIA Straight Shank, End Mill Shank Drill (Carbide) VariDrill Solid Carbide Drill 8xD VDS403A.

Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Double Margin Drill, Regular

MISUMI

[Features]
·By providing 4 margins on the outer periphery of the drill, the guide performance during chamfer and penetration is improved, enabling highly straight and stable drilling
·Supports a wide range of work materials from general steel to stainless steel
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

MISUMI

By applying three rake + R thinning, it demonstrates a high level of afferent.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

MISUMI

[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

MISUMI

[Features]
·Ideal for high-precision small-diameter hole drilling
·The shank diameter is unified to 3 mm, enabling high-precision chucking
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining

Volume Discount
Days to Ship: 10 Day(s) or more
TiAlN Coated Carbide Drill, Straight Shank / Regular

MISUMI

[Features]
·Versatile carbide drill for a wide range of applications
·TiAlN coating enables high-speed cutting
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 14 Day(s) or more
Carbide Drill, Straight Shank / Stub

MISUMI

[Features]
·Versatile uncoated carbide drill for a wide range of applications
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
Carbide Drill, Straight Shank / Regular

MISUMI

[Features]
·Versatile uncoated carbide drill for a wide range of applications
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
Aqua Drill EX Regular AQDEXR

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 8D AQDEXOH8D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Days to Ship: 16 Day(s) or more
UTDSX UT, Micro Coating Unimax Short Flute Drill Bit

UNION TOOL

[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing

STOCK
Days to Ship: 1 Day(s) or more
UTDLX UT, Micro Coating Unimax Long Blade Drill Bit

UNION TOOL

[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.

Days to Ship: 12 Day(s) or more
Carbide Edged Tip Straight Shank Drill

FUKUDA

Economical brazing type. A drill for cast iron and non-ferrous metals which maintains the excellent characteristics of carbide alloy along with excellent cost-performance, as it can be repolished any number of times. The shank is the same as the blade/cutting diameter.

STOCK
Days to Ship: 1 Day(s) or more
Carbide Solid Tip Straight Shank Drill

FUKUDA

A carbide tip is brazed, is ideal for drilling aluminum alloy, cast iron, etc.

Days to Ship: 16 Day(s) or more
Super Multi-Drill External Refueling, GS-Model 2D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 3D Type

SUMITOMO ELECTRIC HARDMETAL

Adopts an Aurora coating (DLC coating) and low resistance WL (wide L) thinning for greatly reduced cutting resistance. Aurora coating and blade shape achieve a stable long life.

Days to Ship: 16 Day(s) or more
End Mill Shank Type 3 x D RT100U 5514

GUHRING

[Features]
· Supports a wide range of machining and enables high-efficiency, high-speed machining.

Days to Ship: 10 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	8 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	18 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	14 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type


Brand	MISUMI	BOTEK	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	MISUMI	NACHI(FUJIKOSHI)	SUMITOMO ELECTRIC HARDMETAL	ATOM	DIJET	OSG	OSG	MISUMI	MITSUBISHI HITACHI TOOL	OKAZAKI SEIKO	OMIKOGYO	SUMITOMO ELECTRIC HARDMETAL	OSG	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	UNION TOOL	SUMITOMO ELECTRIC HARDMETAL	ATOM	NACHI(FUJIKOSHI)	OSG	WIDIA	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	UNION TOOL	UNION TOOL	FUKUDA	FUKUDA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	GUHRING
Product Series	TiAlN Coated Carbide Drill, Regular	BOTEK Gun Drill (Type with Cemented Carbide)	Aqua Drill 3-Flute AQD3F	Aqua Drill EX Oil Hole 20D AQDEXOH20D	Carbide Drill 4D Type_AD-4D	TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model	Aqua Drill EX Flat AQDEXZ	Super Multi-Drill External Refueling, GS-Model 4D-Type	Super Long Drill	EZ Drill (for 5D) EZDL Type	Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D	Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D	Carbide Burnishing Drill, Straight Model	Carbide OH Non-Step Borer 5D 05WHNSB□□□□-TH	Solid Carbide Drill for Cast Iron / Nonferrous SSN	Carbide Twisted V Drill, Long Size for Models H7-H8	Flat Multi-Drill MDF Type External Lubrication 2D Type	Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D	TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub	TiAlN Coated Carbide Long Drill, Straight Shank	Aqua Drill FC AQDFC	Aqua Drill EX Oil Hole 3D AQDEXOH3D	Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS	C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit	Super Multi-Drill Internal Refueling, HGS-Model 5D-Type	Standard Solid Drill with Coating	Aqua Drill EX Oil Hole 3-Flute 10D AQDEXOH3F10D	Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D	VariDrill Solid Carbide Drill 8xD VDS403A	TiAlN Coated Carbide Double Margin Drill, Regular	TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular	TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub	TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model	TiAlN Coated Carbide Drill, Straight Shank / Regular	Carbide Drill, Straight Shank / Stub	Carbide Drill, Straight Shank / Regular	Aqua Drill EX Regular AQDEXR	Aqua Drill EX Oil Hole 8D AQDEXOH8D	UTDSX UT, Micro Coating Unimax Short Flute Drill Bit	UTDLX UT, Micro Coating Unimax Long Blade Drill Bit	Carbide Edged Tip Straight Shank Drill	Carbide Solid Tip Straight Shank Drill	Super Multi-Drill External Refueling, GS-Model 2D-Type	Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 3D Type	End Mill Shank Type 3 x D RT100U 5514
Days to Ship	Same day or more	8 Day(s) or more	11 Day(s) or more	11 Day(s) or more	12 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	18 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	11 Day(s) or more	2 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	14 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	1 Day(s) or more	12 Day(s) or more	1 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more
Specifications																																							STOCK		STOCK
Hole diameter (drill diameter) D(mm)	0.3 ～ 13	3 ～ 20	3 ～ 16	1 ～ 10	2 ～ 20	3 ～ 13	0.5 ～ 20	1 ～ 10	0.3 ～ 13	3 ～ 16	2 ～ 20	3 ～ 12	0	12	0.5 ～ 13	10	-	2 ～ 20	3 ～ 13	3 ～ 10	2 ～ 12	3 ～ 16	0.19 ～ 5	0.11 ～ 3	7	0.3 ～ 6	3 ～ 16	2 ～ 20	1.5 ～ 20	1 ～ 11	3 ～ 13	3 ～ 8	0.38 ～ 2.7	1 ～ 8	0.5 ～ 7.5	1 ～ 7.5	2 ～ 16	3 ～ 16	0.3 ～ 2	0.3 ～ 3	3 ～ 12.5	6 ～ 25	2.2 ～ 12.6	8	3 ～ 20
Overall Length L(mm)	38 ～ 124	150 ～ 500	48 ～ 144	71 ～ 280	66 ～ 153	46 ～ 137	47 ～ 145	49 ～ 105	75 ～ 250	77 ～ 194	66 ～ 165	90 ～ 215	40 ～ 60	156	45 ～ 118	165	-	70 ～ 225	66 ～ 107	100 ～ 200	47 ～ 130	68 ～ 146	38 ～ 64	38	109	30 ～ 80	89 ～ 268	70 ～ 205	58 ～ 200	45 ～ 118	66 ～ 124	62 ～ 79	38	34 ～ 117	20 ～ 74	34 ～ 109	49 ～ 160	81 ～ 242	38	38 ～ 80	75 ～ 155	115 ～ 240	45 ～ 100	94	62 ～ 131
Groove Length L(mm)	3 ～ 77	60 ～ 340	16 ～ 80	23 ～ 230	20 ～ 101	16 ～ 78	1.65 ～ 90	12 ～ 60	15 ～ 120	24 ～ 128	12 ～ 100	40 ～ 155	0	93	6 ～ 60	115	16 ～ 43.2	18 ～ 160	20 ～ 60	60 ～ 140	15 ～ 73	17 ～ 80	1.2 ～ 26	1.2 ～ 12	56	4 ～ 40	39 ～ 208	18 ～ 140	18 ～ 148	12 ～ 71	28 ～ 77	20 ～ 41	6 ～ 12	12 ～ 75	3 ～ 34	12 ～ 69	15 ～ 96	33 ～ 176	1.5 ～ 10	4.5 ～ 45	43 ～ 105	60 ～ 160	10 ～ 49	40	20 ～ 79
work material	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]
Shank Type	End Mill Shank	-	End Mill Shank / straight shank	straight shank	End Mill Shank	straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank	straight shank	straight shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank	straight shank	straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	straight shank	straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	straight shank	End Mill Shank	End Mill Shank / straight shank	straight shank	End Mill Shank
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	Carbide	Carbide	Carbide
With/without Oil Hole	NA	Available	NA	Available	NA	NA	NA	NA	NA	Available	Available	Available	NA	Available	NA	Available	NA	Available	NA	Available / NA	NA	Available	NA	NA	Available	NA	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	Available	NA
Coating Y/N	Available	NA	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	NA	Available	NA	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	NA	Available	Available	Available	Available	NA	NA	Available	Available	Available
Coating Type	TiAlN	-	Other	For General Steels (AlCrN, etc.)	Other	TiAlN	Other	For High Hardness (Silicon Group)	Non-Coated	TiCN	Other	Other	-	For High Hardness (Silicon Group)	Non-Coated	-	-	Other	TiAlN	TiAlN	Other	Other	Other	Other	For High Hardness (Silicon Group)	TiAlN	For General Steels (AlCrN, etc.)	Other	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	-	-	Other	Other	TiCN	Other	-	-	For High Hardness (Silicon Group)	DLC	Other

1
2
3
4
Next >>

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)
- 0～0.995
  - 0
  - 0.01
  - 0.015
  - 0.02
  - 0.025
  - 0.03
  - 0.035
  - 0.04
  - 0.045
  - 0.05
  - 0.055
  - 0.06
  - 0.065
  - 0.07
  - 0.075
  - 0.08
  - 0.085
  - 0.09
  - 0.095
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.13
  - 0.135
  - 0.14
  - 0.145
  - 0.15
  - 0.155
  - 0.16
  - 0.165
  - 0.17
  - 0.175
  - 0.18
  - 0.185
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.395
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.455
  - 0.46
  - 0.465
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.565
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.635
  - 0.64
  - 0.645
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.685
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.715
  - 0.72
  - 0.725
  - 0.73
  - 0.735
  - 0.74
  - 0.745
  - 0.75
  - 0.755
  - 0.76
  - 0.765
  - 0.77
  - 0.775
  - 0.78
  - 0.785
  - 0.79
  - 0.795
  - 0.8
  - 0.805
  - 0.81
  - 0.815
  - 0.82
  - 0.825
  - 0.83
  - 0.835
  - 0.84
  - 0.845
  - 0.85
  - 0.855
  - 0.86
  - 0.865
  - 0.87
  - 0.875
  - 0.88
  - 0.885
  - 0.89
  - 0.895
  - 0.9
  - 0.905
  - 0.91
  - 0.915
  - 0.92
  - 0.925
  - 0.93
  - 0.935
  - 0.94
  - 0.945
  - 0.95
  - 0.955
  - 0.96
  - 0.965
  - 0.97
  - 0.975
  - 0.98
  - 0.985
  - 0.99
  - 0.995
- 1～1.995
  - 1
  - 1.005
  - 1.01
  - 1.015
  - 1.02
  - 1.025
  - 1.03
  - 1.035
  - 1.04
  - 1.045
  - 1.05
  - 1.055
  - 1.06
  - 1.065
  - 1.07
  - 1.075
  - 1.08
  - 1.085
  - 1.09
  - 1.095
  - 1.1
  - 1.105
  - 1.11
  - 1.115
  - 1.12
  - 1.125
  - 1.13
  - 1.135
  - 1.14
  - 1.145
  - 1.15
  - 1.155
  - 1.16
  - 1.165
  - 1.17
  - 1.175
  - 1.18
  - 1.185
  - 1.19
  - 1.195
  - 1.2
  - 1.205
  - 1.21
  - 1.215
  - 1.22
  - 1.225
  - 1.23
  - 1.235
  - 1.24
  - 1.245
  - 1.25
  - 1.255
  - 1.26
  - 1.265
  - 1.27
  - 1.275
  - 1.28
  - 1.285
  - 1.29
  - 1.295
  - 1.3
  - 1.305
  - 1.31
  - 1.315
  - 1.32
  - 1.325
  - 1.33
  - 1.335
  - 1.34
  - 1.345
  - 1.35
  - 1.355
  - 1.36
  - 1.365
  - 1.37
  - 1.375
  - 1.38
  - 1.385
  - 1.39
  - 1.395
  - 1.4
  - 1.405
  - 1.41
  - 1.415
  - 1.42
  - 1.425
  - 1.43
  - 1.435
  - 1.44
  - 1.445
  - 1.45
  - 1.455
  - 1.46
  - 1.465
  - 1.47
  - 1.475
  - 1.48
  - 1.485
  - 1.49
  - 1.495
  - 1.5
  - 1.505
  - 1.51
  - 1.515
  - 1.52
  - 1.525
  - 1.53
  - 1.535
  - 1.54
  - 1.545
  - 1.55
  - 1.555
  - 1.56
  - 1.565
  - 1.57
  - 1.575
  - 1.58
  - 1.585
  - 1.59
  - 1.595
  - 1.6
  - 1.605
  - 1.61
  - 1.615
  - 1.62
  - 1.625
  - 1.63
  - 1.635
  - 1.64
  - 1.645
  - 1.65
  - 1.655
  - 1.66
  - 1.665
  - 1.67
  - 1.675
  - 1.68
  - 1.685
  - 1.69
  - 1.695
  - 1.7
  - 1.705
  - 1.71
  - 1.715
  - 1.72
  - 1.725
  - 1.73
  - 1.735
  - 1.74
  - 1.745
  - 1.75
  - 1.755
  - 1.76
  - 1.765
  - 1.77
  - 1.775
  - 1.78
  - 1.785
  - 1.79
  - 1.795
  - 1.8
  - 1.805
  - 1.81
  - 1.815
  - 1.82
  - 1.825
  - 1.83
  - 1.835
  - 1.84
  - 1.845
  - 1.85
  - 1.855
  - 1.86
  - 1.865
  - 1.87
  - 1.875
  - 1.88
  - 1.885
  - 1.89
  - 1.895
  - 1.9
  - 1.905
  - 1.91
  - 1.915
  - 1.92
  - 1.925
  - 1.93
  - 1.935
  - 1.94
  - 1.945
  - 1.95
  - 1.955
  - 1.96
  - 1.965
  - 1.97
  - 1.975
  - 1.98
  - 1.984
  - 1.985
  - 1.99
  - 1.995
- 2～2.99
  - 2
  - 2.01
  - 2.015
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.115
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.215
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.315
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.383
  - 2.39
  - 2.4
  - 2.41
  - 2.415
  - 2.42
  - 2.43
  - 2.439
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.489
  - 2.49
  - 2.5
  - 2.51
  - 2.515
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.578
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.615
  - 2.62
  - 2.63
  - 2.64
  - 2.642
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.705
  - 2.71
  - 2.715
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.779
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.815
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.915
  - 2.92
  - 2.93
  - 2.94
  - 2.947
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.048
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.264
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.455
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.571
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.658
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.734
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.039
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.176
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.217
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.366
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.623
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.763
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.837
  - 4.84
  - 4.85
  - 4.852
  - 4.86
  - 4.864
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.106
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.159
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.49999999999999
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.558
  - 5.56
  - 5.565
  - 5.57
  - 5.58
  - 5.59
  - 5.59999999999999
  - 5.6
  - 5.61
  - 5.616
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.69999999999999
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.79999999999999
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.89999999999999
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.954
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.95
  - 6
  - 6.01
  - 6.02
  - 6.03
  - 6.04
  - 6.05
  - 6.06
  - 6.07
  - 6.08
  - 6.09
  - 6.09999999999999
  - 6.1
  - 6.13
  - 6.15
  - 6.19999999999999
  - 6.2
  - 6.23
  - 6.25
  - 6.29999999999999
  - 6.3
  - 6.33
  - 6.35
  - 6.35 (¼")
  - 6.365
  - 6.375
  - 6.39999999999999
  - 6.4
  - 6.43
  - 6.45
  - 6.49999999999999
  - 6.5
  - 6.528
  - 6.53
  - 6.55
  - 6.59999999999999
  - 6.6
  - 6.63
  - 6.65
  - 6.69999999999999
  - 6.7
  - 6.73
  - 6.746
  - 6.75
  - 6.8
  - 6.83
  - 6.85
  - 6.89999999999999
  - 6.9
  - 6.93
  - 6.95
- 7～7.98
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.09999999999999
  - 7.1
  - 7.13
  - 7.14
  - 7.145
  - 7.19999999999999
  - 7.2
  - 7.23
  - 7.25
  - 7.29999999999999
  - 7.3
  - 7.33
  - 7.35
  - 7.36
  - 7.38
  - 7.39999999999999
  - 7.4
  - 7.43
  - 7.45
  - 7.49999999999999
  - 7.5
  - 7.52
  - 7.53
  - 7.54
  - 7.541
  - 7.55
  - 7.59999999999999
  - 7.6
  - 7.63
  - 7.69999999999999
  - 7.7
  - 7.73
  - 7.75
  - 7.79999999999999
  - 7.8
  - 7.83
  - 7.85
  - 7.89999999999999
  - 7.9
  - 7.93
  - 7.938
  - 7.94
  - 7.95
  - 7.953
  - 7.98
- 8～8.93
  - 8
  - 8.01
  - 8.02
  - 8.03
  - 8.04
  - 8.05
  - 8.06
  - 8.07
  - 8.08
  - 8.09
  - 8.09999999999999
  - 8.1
  - 8.13
  - 8.19999999999999
  - 8.2
  - 8.23
  - 8.25
  - 8.29999999999998
  - 8.3
  - 8.33
  - 8.334
  - 8.39999999999998
  - 8.4
  - 8.43
  - 8.433
  - 8.5
  - 8.50000000000001
  - 8.53
  - 8.58
  - 8.59999999999998
  - 8.6
  - 8.63
  - 8.69999999999998
  - 8.7
  - 8.73
  - 8.733
  - 8.75
  - 8.79999999999998
  - 8.8
  - 8.80000000000001
  - 8.83
  - 8.85
  - 8.89999999999998
  - 8.9
  - 8.90000000000001
  - 8.93
- 9～9.97
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.09999999999998
  - 9.1
  - 9.129
  - 9.13
  - 9.19999999999998
  - 9.2
  - 9.20000000000001
  - 9.21
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.29999999999998
  - 9.3
  - 9.30000000000001
  - 9.33
  - 9.347
  - 9.36
  - 9.38
  - 9.39999999999998
  - 9.4
  - 9.40000000000001
  - 9.43
  - 9.49999999999998
  - 9.5
  - 9.50000000000001
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.59999999999998
  - 9.6
  - 9.60000000000001
  - 9.63
  - 9.69999999999998
  - 9.7
  - 9.70000000000001
  - 9.73
  - 9.75
  - 9.79999999999998
  - 9.8
  - 9.80000000000001
  - 9.83
  - 9.85
  - 9.89999999999998
  - 9.9
  - 9.90000000000001
  - 9.92
  - 9.921
  - 9.93
  - 9.95
  - 9.97
- 10～10.93
  - 10
  - 10.01
  - 10.02
  - 10.03
  - 10.04
  - 10.05
  - 10.06
  - 10.07
  - 10.08
  - 10.09
  - 10.1
  - 10.13
  - 10.2
  - 10.23
  - 10.25
  - 10.3
  - 10.32
  - 10.33
  - 10.4
  - 10.43
  - 10.5
  - 10.53
  - 10.6
  - 10.63
  - 10.7
  - 10.716
  - 10.72
  - 10.73
  - 10.75
  - 10.8
  - 10.83
  - 10.85
  - 10.9
  - 10.93
- 11～11.95
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.113
  - 11.13
  - 11.133
  - 11.2
  - 11.22
  - 11.23
  - 11.24
  - 11.3
  - 11.33
  - 11.36
  - 11.38
  - 11.4
  - 11.43
  - 11.5
  - 11.509
  - 11.51
  - 11.53
  - 11.56
  - 11.6
  - 11.63
  - 11.7
  - 11.73
  - 11.8
  - 11.83
  - 11.85
  - 11.9
  - 11.908
  - 11.91
  - 11.93
  - 11.95
- 12～12.96
  - 12
  - 12.01
  - 12.02
  - 12.03
  - 12.04
  - 12.05
  - 12.06
  - 12.07
  - 12.08
  - 12.09
  - 12.1
  - 12.2
  - 12.3
  - 12.304
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.96
- 13～13.9
  - 13
  - 13.096
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.43
  - 13.49
  - 13.5
  - 13.55
  - 13.6
  - 13.7
  - 13.8
  - 13.89
  - 13.891
  - 13.9
- 14～14.96
  - 14
  - 14.1
  - 14.2
  - 14.288
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.684
  - 14.7
  - 14.8
  - 14.9
  - 14.96
- 15～15.9
  - 15
  - 15.083
  - 15.1
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.479
  - 15.5
  - 15.55
  - 15.6
  - 15.7
  - 15.8
  - 15.87
  - 15.875
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.271
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.67
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.463
  - 17.5
  - 17.55
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.258
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.654
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.55
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5/24.7
  - 24
  - 24.5
  - 24.5/24.7
- 25～25.5
  - 25
  - 25.5
- 26～26.5/26.7
  - 26
  - 26.5
  - 26.5/26.7
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 44
Drawing

Clear

Overall Length L(mm)
11

13

16

20

21

22

23

24

25

26

28

30

32

34

35

36

38

40

42

42.5

43

44

45

46

47

48

48.5

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

100

101

102

103

104

104.2

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

130

131

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

165

166

167

168

169

170

171

172

174

175

176

177

178

179

180

182

183

184

185

186

188

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

208

209

210

211

212

215

216

217

218

220

221

222

223

224

225

227

228

229

230

232

233

234

235

237

238

240

241

242

244

245

246

247

248

249

250

255

257

258

260

263

265

267

268

269

270

271

272

274

275

276

278

280

281

285

290

294

295

297

298

300

302

303

305

310

314

315

320

321

322

323

330

339

340

342

350

359

363

367

370

371

383

386

390

400

420

430

450

480

485

500

510

560

600

740

910

1080
Drawing

Clear

Groove Length L(mm)
- 0～0.9
  - 0
  - 0.015
  - 0.025
  - 0.04
  - 0.05
  - 0.06
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.18
  - 0.2
  - 0.22
  - 0.24
  - 0.25
  - 0.3
  - 0.33
  - 0.4
  - 0.44
  - 0.48
  - 0.5
  - 0.55
  - 0.6
  - 0.7
  - 0.8
  - 0.88
  - 0.9
- 1～1.98
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.65
  - 1.7
  - 1.8
  - 1.9
  - 1.98
- 2～2.97
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.31
  - 2.4
  - 2.5
  - 2.6
  - 2.64
  - 2.7
  - 2.8
  - 2.9
  - 2.97
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.8
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.8
- 7～7.8
  - 7
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.8
  - 8
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.8
- 9～9.8
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.8
- 10～10.8
  - 10
  - 10..1
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.8
  - 12
  - 12.2
  - 12.3
  - 12.5
  - 12.6
  - 12.8
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.8
- 14～14.9
  - 14
  - 14.3
  - 14.4
  - 14.5
  - 14.8
  - 14.9
- 15～15.8
  - 15
  - 15.3
  - 15.6
  - 15.8
- 16～16.8
  - 16
  - 16.1
  - 16.2
  - 16.5
  - 16.7
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.6
  - 17.8
- 18～18.9
  - 18
  - 18.5
  - 18.6
  - 18.8
  - 18.9
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.7
  - 19.8
- 20～20.7
  - 20
  - 20.3
  - 20.4
  - 20.7
- 21～21.8
  - 21
  - 21.2
  - 21.4
  - 21.6
  - 21.8
- 22～22.8
  - 22
  - 22.1
  - 22.2
  - 22.5
  - 22.8
- 23～23.9
  - 23
  - 23.3
  - 23.4
  - 23.9
- 24～24.8
  - 24
  - 24.3
  - 24.5
  - 24.6
  - 24.8
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.7
  - 25.8
- 26～26.6
  - 26
  - 26.1
  - 26.3
  - 26.4
  - 26.6
- 27～27.8
  - 27
  - 27.6
  - 27.8
- 28～28.8
  - 28
  - 28.1
  - 28.2
  - 28.5
  - 28.8
- 29～29.4
  - 29
  - 29.3
  - 29.4
- 30～30.8
  - 30
  - 30.6
  - 30.8
- 31～31.7
  - 31
  - 31.2
  - 31.5
  - 31.7
- 32～32.8
  - 32
  - 32.3
  - 32.4
  - 32.8
- 33～33.8
  - 33
  - 33.6
  - 33.8
- 34～34.8
  - 34
  - 34.1
  - 34.5
  - 34.8
- 35～35.5
  - 35
  - 35.3
  - 35.5
- 36～36.8
  - 36
  - 36.5
  - 36.8
- 37～37.5
  - 37
  - 37.5
- 38～38.3
  - 38
  - 38.3
- 39～39.8
  - 39
  - 39.8
- 40～40.5
  - 40
  - 40.5
- 41～41.3
  - 41
  - 41.3
- 42～42.8
  - 42
  - 42.8
- 43～43.5
  - 43
  - 43.2
  - 43.5
- 44～44.3
  - 44
  - 44.3
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53～53.4
  - 53
  - 53.4
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 130
- 131
- 132
- 133
- 135
- 136
- 137
- 138
- 140
- 143
- 144
- 145
- 146
- 148
- 149
- 150
- 152
- 153
- 154
- 155
- 156
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 167
- 168
- 169
- 170
- 171
- 173
- 175
- 176
- 177
- 180
- 181
- 182
- 183
- 184
- 185
- 188
- 189
- 190
- 195
- 196
- 197
- 198
- 200
- 205
- 207
- 208
- 210
- 212
- 214
- 215
- 216
- 218
- 219
- 220
- 223
- 224
- 227
- 230
- 231
- 232
- 234
- 240
- 242
- 248
- 250
- 252
- 253
- 258
- 260
- 263
- 264
- 265
- 270
- 272
- 274
- 277
- 280
- 282
- 290
- 292
- 295
- 300
- 302
- 310
- 315
- 318
- 322
- 323
- 327
- 330
- 337
- 340
- 343
- 350
- 360
- 372
- 385
- 400
- 402
- 432
- 440
- 460
- 512
- 550
- 692
- 860
- 1030
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
Details

Clear

Shank Type
- End Mill Shank
- straight shank
- Taper shank
Images

Clear

Tool Material Type
- High-speed steel
- Carbide
- PCD
Details

Clear

With/without Oil Hole
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- Dia Coat
- Non-Coated
- Other
Details

Clear

Narrow search by specifying Manufacturer

- MISUMI (25)
- Economy series (0)
- GUHRING (43)
- NACHI(FUJIKOSHI) (30)
- OSG (19)
- DIJET (10)
- SUMITOMO ELECTRIC HARDMETAL (7)
- OKAZAKI SEIKO (6)
- WIDIN (4)
- 7 LEADERS (3)
- MITSUBISHI HITACHI TOOL (3)
- IWATA TOOL (3)
- OMIKOGYO (3)
- UNION TOOL (3)
- TOYO DRILL (2)
- ATOM (2)
- FUKUDA (2)
- ASAHI TOOLS (1)
- BOTEK (1)
- DIXI (1)
- EIKOSHA (1)
- KYOWA SEIKO (1)
- MITSUBISHI MATERIALS (1)
- SANDVIK (1)
- WIDIA (1)
- ISCAR (0)
- RYOCO SEIKI (0)
- TUNGALOY (0)
- ISHIHASHI (0)
- NS TOOL (0)
- MAPAL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)（work material：Cast Iron）

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)（work material：Cast Iron）

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB