(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Tooling（Product Category：Measuring equipment）

Tool holders are parts that acts as adapters when attaching cutting tools to machine tools. They allow for easy attachment/detachment of cutting tools, such as drill bits and end mills for machining, to machining centers, etc. Commonly used tool holders are collet holders (chucks), oil-hydraulic type hydraulic holders (chucks), shrink-fit holders made using the thermal expansion of metals, etc. Tool holders are required to be of high quality in order to bring out the best performance in machine tools and cutting tools used for high-precision machining, and they play a significant role in machining precision. The combination of shanks suitable for machine tool specifications and chuck capacities for the tool bits provides an extensive variety of tool holders; selecting the ideal tool holder is a necessity.

Search by specifying the lower class category

52 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

Level Master

BIG DAISHOWA SEIKI

[Features]
· For level management of machine tools/precision assembly machinery
· 2-axis simultaneous detection level
· Alerts to completion of leveling operation with an LED and buzzer
· Uses an optical level detection sensor
· 2-axis simultaneous detection dramatically reduces cost and inspection time compared to conventional leveling work using 2 levels

Days to Ship: 16 Day(s) or more
Reference Position Detection Bar Magic Center

KASAHARA

As it has a simple structure and measurement terminal that does not easily get magnetized, high measurement accuracy can be maintained for a long time. Measurement accuracy is within 2 microns

Days to Ship: 12 Day(s) or more
Accu Stand Straight Shank Type

BIG DAISHOWA SEIKI

[Features]
· Straight shank type Accu-Stand. Ideal for aligning workpieces

Days to Ship: 10 Day(s) or more
Accu Center (High-Precision Centering Bar)

BIG DAISHOWA SEIKI

[Features]
· High-precision positioning done with a simple mechanical design. Measurements can be completed by simply attaching a probe to the end face of the workpiece.
· Repeatability within 3 μ (vertical type).
· A hard chrome plating of excellent durability has been adopted for the probe.

Days to Ship: Same day or more
Pace master

BIG DAISHOWA SEIKI

STOCK
Days to Ship: 1 Day(s)
Z Block Presetter

KASAHARA

Measurement error is within 5 microns

Days to Ship: 12 Day(s) or more
Tool Setter - Conductive Type / Magnetic Cable

NISSIN SANGYO

An ultra-precision tool setter with a detection accuracy of 1 µm.
·Minimum measuring tool diameter: ⌀1 mm
·LED: Red
·Repeatability: ±0.001 mm
·Weight: TOS50: 540 g, TOS100: 780 g
·Accessories: Lithium battery CR2032, 1 pc.

Days to Ship: 17 Day(s) or more
Point Master Replacement Stylus

BIG DAISHOWA SEIKI

[Features]
· Point Master replaceable stylus.
· Stylus portion can be detached and an M3 screw-in type is used, meaning that the stylus can be replaced based on the workpiece shape should the stylus suffer damage

Days to Ship: 16 Day(s) or more
Point Master Pro

BIG DAISHOWA SEIKI

[Features]
· Ideal for a high-speed machining center with ceramic bearings. Instantly detects the reference point even for non-conductive workpieces or machines

Days to Ship: 12 Day(s) or more
NS Tool Setter / Magnet Cable

NISSIN SANGYO

For easy length measurement of tools mounted on machines. Significantly shortens the work time.

[Features]
· With sub-zero treatment and ultra-precision lapping in the block gauge production method to prevent secular gauge.
· Used for both iron and non-ferrous metals (aluminum, copper, etc.) (use magnetic cable for plastics, wood molds, etc.).
· It has movable width of 5 mm vertically and is not affected by a small amount of oil film.
· The tool length can be directly input in offset

Days to Ship: 12 Day(s) or more
CK Presetter

BIG DAISHOWA SEIKI

[Features]
· Fully utilizes the advantages of a modular system.
· Dedicated, low-cost presetter enables simple presetting with only the head.
· Work can be performed even in a small space adjacent to machinery thanks to its compact design.
· One unit can be used as a roughing and finishing head, and various lengths of toolholder heads can be easily preset.

Days to Ship: 12 Day(s) or more
Point Master (PMC Series/BT/BBT Shank Type)

BIG DAISHOWA SEIKI

[Features]
· Instantly transmits touch position with LED lamp and buzzer.
· Notifies reduction of battery life via flashing LED during workpiece measurement.
· BT/BBT shank type.

Days to Ship: 12 Day(s) or more
Touch point sensor (energizing formula)

VERTEX

Indicates the touch position by a lamp and sound.
Accessories: Battery 12 V dry cell battery (size N) × 1 pc.

Days to Ship: 12 Day(s) or more
Touch point sensor

VERTEX

A lamp indicated the touch position.
[Features]
A highly accurate energized ceramic probe.
·VPS series
·Shank diameter: 20 mm, 32 mm
·Grit size: ±0.005 mm
·Probe diameter: 10 mm
·Battery: N dry cell battery (1.5 V) × 2 pcs. (included)

Days to Ship: 12 Day(s) or more
Centering bar

FUJI TOOL

[Features]
· Can be used for everything from machining centers to NC milling machines.
[Applications]
· For general machine, NC machine, machining center, and other factory machine X and Y axis origin point location testing.

Days to Ship: 12 Day(s)
Point Master Pro PMPC Series Straight Shank Type

BIG DAISHOWA SEIKI

[Features]
· Detects reference point instantly even on non-conductive workpieces or machines.
· Notifies user of touch position with LED and an electronic beep.

Days to Ship: 12 Day(s) or more
Point Master Pro PMPC Series BBT Shank Type

BIG DAISHOWA SEIKI

[Features]
· Detects reference point instantly even on non-conductive workpieces or machines.
· Notifies user of touch position with LED and an electronic beep.

Days to Ship: 12 Day(s) or more
Reference Position Detection Bar Spring for Replacement of Magic Center

KASAHARA

There are hooks on both ends of the spring, and the spring itself has two hooks.

Days to Ship: 12 Day(s) or more
Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces)

NISSIN SANGYO

An ultra-precise tool setter with a detection accuracy of 1 μm.

[Features]
· An ultra-precise tool setter with a detection accuracy of 1 μm.
· Uses scratch-resistant ceramic for the cutting edge detection part.
· Ideal for detecting the position of the cutting edges of small diameter drills and end mills.
· Adopts an internal contact system that can be used for non-conductive workpieces and machining centers with ceramic spindles.
· Magnet on base plate.
· Can be used with both vertical and horizontal types.

Days to Ship: 16 Day(s) or more
Tool Point

NIIGATA SEIKI (SK)

A presetter used as a high precision positioning detector for milling cutters and machining centers.
[Features]
· Finds the 0 point rapidly with light sensor. (Conductivity)
[Applications]
· For setting the reference position in the Z direction.
· Used for setting the zero point reference for standard to precision tolerance on general purpose and NC milling machines, machining centers, etc.

STOCK
Days to Ship: 12 Day(s) or more
Stylus Center

NIIGATA SEIKI (SK)

Presetter optimal for high-precision X/Y-axis centering bar.
[Applications]
· It can detect the reference position within 2 μm.
· Ideal for determining accurate reference points for general use, NC milling cutter and MC origin positions, etc.
· Lapping finish is applied to working surface, which is the foundation of accuracy.
· Enables positioning by simply placing the probe on the end face of the workpiece.
· Suitable rotation speed: 450 to 600 rpm; over-increasing the rotation speed can cause damage.
[Applications]
· Used as a high-precision X/Y-axis centering bar.

Days to Ship: 12 Day(s) or more
Accu Stand (AM-M)

BIG DAISHOWA SEIKI

[Features]
· A miniature flexible arm stand which provides secure locking with a special cam mechanism.
· Strong magnet for firm hold.
· The movable part is covered with rubber, protecting it from dust.

Days to Ship: 16 Day(s) or more
Accu Stand (ASP-M)

BIG DAISHOWA SEIKI

[Features]
・ Standard type of a flexible arm stand that locks securely with a special and cam mechanism
・ Firmly fixed with a strong magnet
・ Since the movable part is covered with rubber, it shuts out dust

STOCK
Days to Ship: 1 Day(s)
Accu Stand HSK Shank Type

BIG DAISHOWA SEIKI

[Features]
· Ideal for small machining center HSK-E spindles.
· HSK-E shank type which can be directly mounted on spindles.

Days to Ship: 12 Day(s) or more
Clamp Piece for φ6 Accu Stand

BIG DAISHOWA SEIKI

[Specifications]
Tip hole ø8, side hole ø6
[Applications]
Please purchase when using a ø6 dial gauge.

Days to Ship: 20 Day(s) or more
Accu Stand Arm Only Type

BIG DAISHOWA SEIKI

[Features]
· Arm only type of the Accu Stand. Can be used for various purposes depending on personal requirements

Days to Ship: 12 Day(s) or more
Accu Stand Cast Base Type

BIG DAISHOWA SEIKI

[Features]
· A flexible arm stand which provides secure locking with a special cam mechanism
■ Cast Base Type
· The surface plate is a "cast base type" ideal for precision measurements.
· A highly stable base shape and precision polish processed bottom surface allow for more precise measurement.
· Further, since the side face has been polished at a right angle to the bottom face, measurements while sliding can also be performed.

Days to Ship: 12 Day(s) or more
Accu Stand Double-Magnet Type

BIG DAISHOWA SEIKI

[Features]
· Double magnet type Accu-Stand. Ideal for machining and cutting workpieces

Days to Ship: 12 Day(s) or more
Accu Stand Magnetic-Base Type

BIG DAISHOWA SEIKI

[Features]
·Firmly fixed with a strong magnet.
·Accu stand magnet base type.

STOCK
Days to Ship: 1 Day(s) or more
Point Master (PMC Series/Straight Shank Type)

BIG DAISHOWA SEIKI

[Features]
· Instantly transmits touch position with LED lamp and buzzer.
· Notifies reduction of battery life via flashing LED during workpiece measurement.
· A straight shank type.

Days to Ship: 12 Day(s) or more
Point Master (PMG Series/Morse Taper Type)

BIG DAISHOWA SEIKI

[Features]
· Instantly transmits touch position with LED lamp. Morse taper type

Days to Ship: 12 Day(s) or more
Point Master (PMG Series/Straight Shank Type)

BIG DAISHOWA SEIKI

[Features]
· Instantly transmits touch position with LED lamp. A straight shank type.

Days to Ship: 1 Day(s) or more
Straight shank touch point

NIKKENKOSAKU

[Features]
· With LED. Can be easily attached to / detached from Nikken Milling Chuck Styles 20 and 32.

Days to Ship: 16 Day(s) or more
Straight shank micro touch

NIKKENKOSAKU

[Features]
· 3D electronic reference point detector.
· 3 Repeatability: ±2 μ swing type touch sensor.
· 3 Large overtravel with red lamp and electronic buzzer that alert the touch position.
· Red lamps around the entire periphery illuminate instantly with 3 touches.

Days to Ship: 16 Day(s) or more
Straight shank micro touch (Internal contact type)

NIKKENKOSAKU

[Features]
· Repeatability: ±2 μ.
· An internal contact type detector which can also be used with non-conductors, with a large overtravel of x, y = ±7 mm, Z = 3 mm.
· The moment you touch it, blue lamps light around the periphery.

Days to Ship: 16 Day(s) or more
Machining Center Touch Point

NIKKENKOSAKU

[Features]
· Tip of the ball is located in a spot 200 mm away from end face of the spindle, usable as a reference point of the Z-axis.
· Equipped with an ultra-precision float mechanism in the thrust direction that enables position detection with a soft touch.

Days to Ship: 16 Day(s) or more
Thick Touch Sensor (Current Supply System)

SYIC

[Features]
· With an overrun protection function.
[Applications]
· Detects position in NC milling cutters and machining centers.

Days to Ship: 1 Day(s)
Dial Type Tool Point

NIIGATA SEIKI (SK)

A dial type presetter that can output the zero datum point in the Z direction.
[Features]
· Using the dial gauge display, it is simple to set the zero datum point for tools.
· With base magnet.
[Applications]
· Used as a dial type positioning detector for milling cutters and machining centers.

Days to Ship: 1 Day(s)
Non-Magnetic Waterproof Type Point Finder

NISSIN SANGYO

Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm.

[Features]
· The waterproof structure prevents the cutting fluid from entering the sensor, thus avoiding measurement errors.
· The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
· Enables accurate measurement of thin workpieces. The stylus swings in the X, Y and Z directions.
· Usable for iron and non-ferrous metal workpieces.
· With the development of a new mechanism (patent pending), measurement accuracy has improved dramatically

Days to Ship: 10 Day(s) or more
Non-Magnetic Waterproof Type Point Finder i

NISSIN SANGYO

Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm. Even measures non-metal workpieces.

[Features]
· In addition to features of the above-mentioned "Non-Magnetic/Waterproof Type Point Finder," measurement on non-metallic workpieces is also enabled.
· Capable of all types of measurement such as reference position setting, inner/outer diameter, centering, angle, groove width and height with high precision

Days to Ship: 10 Day(s) or more
Tool Setter i

NISSIN SANGYO

Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.

[Features]
· Developed for machining centers with ceramic spindles.
· Can also be used for non-conductive workpieces because of the internal contact system.
· Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
· A magnet is attached to the bottom to support both vertical and horizontal use.

Days to Ship: 14 Day(s) or more
Non-Magnetic Buzzer Specification Point Finder

NISSIN SANGYO

[Features]
· The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
· Accurate measurement, even on thin workpieces.
· Includes buzzer with simultaneous electronic sound and LED to provide notification of position detection.
· Safe design that allows the stylus to swing in X/Y/Z directions.
· The measurement accuracy of metals and nonferrous metals has been dramatically improved

Days to Ship: 10 Day(s) or more
Non-Magnetic Point Finder

NISSIN SANGYO

Conventionally, the repeatability of the stylus was limited to lengths of 40 mm. ±1 μm repeat accuracy is possible up to 80 mm.

Days to Ship: 10 Day(s) or more
Non-Magnetic Small Point Finder

NISSIN SANGYO

Used exclusively for small, high speed machining centers.

[Features]
· It can also be used for compact high-speed machining centers for molding mobile phones and digital appliances.
· It can be used with a ceramic spindle and has a nonmagnetic stylus, so there are no measurement errors due to magnetic force

Days to Ship: 10 Day(s) or more
Non-Magnetic Point Finder i

NISSIN SANGYO

The internal switch is turned ON when the stylus makes contact. Non-conductive workpieces can also be measured.

[Features]
· Capable of all types of measurement such as reference position setting, inner/outer diameter, centering, angle, groove width and height.
· Internal contact type that can also measure non-metallic workpieces such as wood, plastic, glass or ceramics.
· With 7 shank sizes and the development of a new mechanism (patent pending), measurement accuracy has improved dramatically

Days to Ship: 10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	1 Day(s)

Days to Ship:	12 Day(s) or more

Days to Ship:	17 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s)

Days to Ship:	12 Day(s) or more

Days to Ship:	20 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s)

Days to Ship:	1 Day(s)

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	14 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Spindle types
HSK type
Tool Type
Retainable blade diameter(mm)
Product Category
Applicable Manufacturing Machinery (main unit)
Chuck Type
Holder Length L(mm)
Maximum Allowable Rotational Speed(min-1)
Coolant System
Nozzle Type


Brand	BIG DAISHOWA SEIKI	KASAHARA	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KASAHARA	NISSIN SANGYO	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	NISSIN SANGYO	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	VERTEX	VERTEX	FUJI TOOL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KASAHARA	NISSIN SANGYO	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	NIKKENKOSAKU	NIKKENKOSAKU	NIKKENKOSAKU	NIKKENKOSAKU	SYIC	NIIGATA SEIKI (SK)	NISSIN SANGYO	NISSIN SANGYO	NISSIN SANGYO	NISSIN SANGYO	NISSIN SANGYO	NISSIN SANGYO	NISSIN SANGYO
Product Series	Level Master	Reference Position Detection Bar Magic Center	Accu Stand Straight Shank Type	Accu Center (High-Precision Centering Bar)	Pace master	Z Block Presetter	Tool Setter - Conductive Type / Magnetic Cable	Point Master Replacement Stylus	Point Master Pro	NS Tool Setter / Magnet Cable	CK Presetter	Point Master (PMC Series/BT/BBT Shank Type)	Touch point sensor (energizing formula)	Touch point sensor	Centering bar	Point Master Pro PMPC Series Straight Shank Type	Point Master Pro PMPC Series BBT Shank Type	Reference Position Detection Bar Spring for Replacement of Magic Center	Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces)	Tool Point	Stylus Center	Accu Stand (AM-M)	Accu Stand (ASP-M)	Accu Stand HSK Shank Type	Clamp Piece for φ6 Accu Stand	Accu Stand Arm Only Type	Accu Stand Cast Base Type	Accu Stand Double-Magnet Type	Accu Stand Magnetic-Base Type	Point Master (PMC Series/Straight Shank Type)	Point Master (PMG Series/Morse Taper Type)	Point Master (PMG Series/Straight Shank Type)	Straight shank touch point	Straight shank micro touch	Straight shank micro touch (Internal contact type)	Machining Center Touch Point	Thick Touch Sensor (Current Supply System)	Dial Type Tool Point	Non-Magnetic Waterproof Type Point Finder	Non-Magnetic Waterproof Type Point Finder i	Tool Setter i	Non-Magnetic Buzzer Specification Point Finder	Non-Magnetic Point Finder	Non-Magnetic Small Point Finder	Non-Magnetic Point Finder i
Days to Ship	16 Day(s) or more	12 Day(s) or more	10 Day(s) or more	Same day or more	1 Day(s)	12 Day(s) or more	17 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s)	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	1 Day(s)	12 Day(s) or more	20 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	1 Day(s) or more	12 Day(s) or more	12 Day(s) or more	1 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	1 Day(s)	1 Day(s)	10 Day(s) or more	10 Day(s) or more	14 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more
Specifications					STOCK															STOCK			STOCK						STOCK
Spindle types	-	-	-	-	-	-	-	-	BT30 / BT40 / HSK-A	-	-	BT40 / BT50	-	-	-	-	BT40	-	-	-	-	-	-	HSK-E	-	-	-	-	-	-	-	-	-	-	-	BT50	-	-	BT30 / BT40	BT30 / BT40	-	BT30 / BT40	-	-	BT30 / BT40
HSK type	-	-	-	-	-	-	-	-	63	-	-	-	-	-	-	-	-	-	-	-	-	-	-	25 ～ 32	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Retainable blade diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Product Category	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment	Measuring equipment
Applicable Manufacturing Machinery (main unit)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Chuck Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holder Length L(mm)	-	-	39 ～ 70	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	104 ～ 108	94	200	-	-	-	-	-	-	-	-	-
Maximum Allowable Rotational Speed(min-1)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coolant System	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Nozzle Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Spindle types
- BT30
- BT40
- BT50
- HSK-A
- HSK-E
Clear

HSK type
25

32

40

50

63

100
Clear

Tool Type
- end mill
- drill
- Reamer
- Facemill
- Tap
Clear

Retainable blade diameter(mm)
0.25～0.50

0.25～ 6

0.3~3

0.45 ～0.55

0.45～3.25

0.45～4.05

0.45～6.05

0.5 to 0.75

0.50 to 0.75

0.5～5.0

0.5～ 6

0.5～6.5

0.5～7.0

0.5 ～ 8

0.5～8

0.5～ 8

0.5–10

0.5～10.0

0.5～13

0.5～13.0

0.55 ～0.65

0.65 ～0.75

0.75 ～0.85

0.75～1.0

0.75～1.00

0.8～6.5

0.85 ～0.95

0.95 ～1.05

1

1.0～0.5

1.0~1.25

1.00～1.25

1 to 13

1.05 ～1.15

1.15 ～1.25

1.25 ～1.35

1.25～1.5

1.25～1.50

1.35 ～1.45

1.45 ～1.55

1.5

1.5～1.0

1.50～1.75

1.5～1.75

1.5 to 10

1.5 ～10

1.55 ～1.65

1.65 ～1.75

1.75 ～1.85

1.75～2.0

1.75～2.00

1.85 ～1.95

1.95 ～2.05

2

2.0～1.5

2.0～2.25

2.00～2.25

2.0～10.0

2.05 ～2.15

2.15 ～2.25

2.25 ～2.35

2.25～2.5

2.25～2.50

2.35 ～2.45

2.45 ～2.55

2.5

2.5 to 2.0

2.5～2.75

2.50～2.75

2.5–3.0

2.5 ～13

2.5～13

2.5 to 16

2.5 ～16

2.5～16.0

2.5 ～20

2.5～20

2.55 ～2.65

2.65 ～2.75

2.675～3.175

2.75 ～2.85

2.75～3.0

2.75～3.00

2.75～3.25

2.85 ～2.95

2.9～3.0

2.925～3.175

2.95 ～3.05

2.95～3.05

2.95～8.05

3

3.0～2.5

3.00～3.25

3~3.5

3.0–3.5

3–4

3–10

3 to 12

3 to 16

M3 to M16

3~25

3.05 ～3.15

3.05～3.15

3.125～3.225

3.15 ～3.25

3.15～3.25

3.175

3.25 ～3.35

3.25～3.35

3.25～3.50

3.25～3.75

3.35 ～3.45

3.35～3.45

3.4~3.5

3.40～3.50

3.45 ～3.55

3.45～3.55

3.5

3.5～3.0

3.50～3.75

3.5～4.0

3.5～20.0

3.55 ～3.65

3.55～3.65

3.65 ～3.75

3.65～3.75

3.75 ～3.85

3.75～3.85

3.75～4.00

3.75～4.25

3.75～ 4.25

3.85 ～3.95

3.85～3.95

3.9～4.0

3.90～4.00

3.95 ～4.05

3.95～4.05

4

4.0～3.5

4.00～4.25

4~4.5

4.0–4.5

4–5

4.05 ～4.15

4.05～4.15

4.15 ～4.25

4.15～4.25

4.25 ～4.35

4.25～4.35

4.25～4.50

4.25～4.75

4.25～ 4.75

4.35 ～4.45

4.35～4.45

4.4～4.5

4.40～4.50

4.45 ～4.55

4.45～4.55

4.5

4.5～4.0

4.50～4.75

4.5–5.0

4.55 ～4.65

4.55～4.65

4.65 ～4.75

4.65～4.75

4.7125～4.8125

4.75 ～4.85

4.75～4.85

4.75～5.00

4.75 to 5.25

4.85 ～4.95

4.85～4.95

4.9~5.0

4.90～5.00

4.95 ～5.05

4.95～5.05

5

5.0～4.0

5.0～4.5

5.00～5.25

5.0～5.5

5～5.5

5–6

5.0～25.0

5.05 ～5.15

5.05～5.15

5.15 ～5.25

5.15～5.25

5.25 ～5.35

5.25～5.35

5.25～5.50

5.25～5.75

5.35 ～5.45

5.35～5.45

5.4～5.5

5.40～5.50

5.45 ～5.55

5.45～5.55

5.5

5.5～5.0

5.50～5.75

5.5–6.0

5.55 ～5.65

5.55～5.65

5.65 ～5.75

5.65～5.75

5.75 ～5.85

5.75～5.85

5.75～6.00

5.85 ～5.95

5.85～5.95

5.9～6.0

5.90～6.00

5.95 ～6.05

5.95～6.05

6

6.0～5.0

6.0～5.5

6 to 6.5

6.0–6.5

6–7

6.05～6.15

6.15～6.25

6.2

6.25～6.35

6.35～6.45

6.4～6.5

6.45～6.55

6.5

6.5～6.0

6.5 to 7.0

6.55～6.65

6.65～6.75

6.75～6.85

6.85～6.95

6.9～7.0

6.95～7.05

7

7.0～6.0

7.0～6.5

7.0～7.5

7～7.5

7–8

7.05～7.15

7.15～7.25

7.25～7.35

7.35～7.45

7.4～7.5

7.45～7.55

7.5

7.5～8.0

7.55～7.65

7.65～7.75

7.75～7.85

7.85～7.95

7.9～8.0

7.95～8.05

8

8.0～7.0

8~8.5

8.0～8.5

8–9

8.4～8.5

8.5

8.5～9.0

8.9～9.0

9

9.0～8.0

9.0～9.5

9～9.5

9–10

9.4～9.5

9.5

9.5 to 10.0

9.9～10.0

10

10.0～9.0

10.0 ～10.5

10.0～10.5

10～10.5

10~11

10.4~10.5

10.5

10.5～11.0

10.9～11.0

11

11.0～10.0

11.0～11.5

11～11.5

11~12

11.4～11.5

11.5

11.5～12.0

11.9～12.0

12

12.0～11.0

12.0～12.5

12～12.5

12~13

12.4~12.5

12.5

12.5～13.0

12.9～13.0

13

13.0～12.0

13.0～13.5

13～14

13.4～13.5

13.5

13.5～14.0

13.9~14.0

14

14.0～13.0

14.0～14.5

14~15

14.4～14.5

14.5

14.5～15.0

14.9～15.0

15

15.0～14.0

15.0～15.5

15~16

15.4～15.5

15.5

15.5～16.0

15.9～16.0

16

16.0～15.0

16.0～16.5

16～17

16.4～16.5

16.5

16.5～17.0

16.9～17.0

17

17.0～16.0

17.0～17.5

17～18

17.4～17.5

17.5

17.5～18.0

17.9～18.0

18

18.0～17.0

18.0～18.5

18~19

18.4～18.5

18.5

18.5～19.0

18.9～19.0

19

19.0～18.0

19.0～19.5

19～20

19.4～19.5

19.5

19.5～20.0

19.9～20.0

20

20.0～19.0

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

32

32.0～31.0

M36

42

50
Clear

Product Category
- Main Body
- Attachments/Accessories
- Heating and Cooling Equipment
- Measuring equipment
Clear

Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
Clear

Chuck Type
- Straight collet
- Shrink fit
- Side lock
Clear

Holder Length L(mm)
15.5

16

16.5

19.5

20

24.5

25

26.5

29

30

33

34

35

39

40

44

45

47

50

52

54

55

60

62

62.5

68.5

70

73

74

75

76

80

81

84.5

85

85.5

90

90.5

91

93

94

95/135/165

96

97.5

100

100/140/170

104

105

105/145/175

108

109.5

110

115

120

120/160/190

122

125

125/175/205

130

130/180/210

131.5

132

135

140

140/190/220

145/195/225

150

155

160

162.5

164.5

165

169

176.5

180.5

182.5

185

186.5

193.5

195

200

220
Clear

Maximum Allowable Rotational Speed(min-1)
10000

15000

20000

30000

45000

50000
Clear

Coolant System
- Center Through (Blade Through)
- Gap Through
Clear

Nozzle Type
- End Cap
Clear

Narrow search by specifying Manufacturer

- BIG DAISHOWA SEIKI (22)
- NISSIN SANGYO (15)
- NIKKENKOSAKU (4)
- KASAHARA (3)
- NIIGATA SEIKI (SK) (3)
- VERTEX (2)
- FUJI TOOL (1)
- KYORITSU SEIKI (1)
- SYIC (1)
- BOSCH (0)
- DREMEL (0)
- KOBAYASHI IRON WORKS (0)
- MAKITA (0)
- MINITOR (0)
- BLUEBIRD (0)
- cejn japan (0)
- ISCAR (0)
- VESSEL (0)
- NEW STRONG (0)
- TOHIN SHOJI (0)
- MANYO TOOLS (0)
- ALBRECHT (0)
- SHINWASOKUTEI (0)
- GIGA SELECTION (0)
- ASAHISEIKOU (0)
- TAKURA KOGU (0)
- NABEYA (0)
- THE CUT (0)
- NOGA JAPAN (0)
- SHOWA TOOL (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- MAPAL (0)
- FUSOSEIKI (0)
- ESCO (0)
- KATO MFG (0)
- NIKKI TRADING (0)
- YUKIWA SEIKO (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- NT TOOL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Tooling

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Tooling（Product Category：Measuring equipment）

Search by specifying the lower class category

Configure

Specification/Dimensions

Spindle types

HSK type

Tool Type

Retainable blade diameter(mm)

Product Category

Applicable Manufacturing Machinery (main unit)

Chuck Type

Holder Length L(mm)

Maximum Allowable Rotational Speed(min-1)

Coolant System

Nozzle Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Tooling

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Tooling（Product Category：Measuring equipment）

Search by specifying the lower class category

Configure

Specification/Dimensions

Spindle types

HSK type

Tool Type

Retainable blade diameter(mm)

Product Category

Applicable Manufacturing Machinery (main unit)

Chuck Type

Holder Length L(mm)

Maximum Allowable Rotational Speed(min-1)

Coolant System

Nozzle Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Tooling

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB