Tooling-Related Equipment（Product Category：Attachments/Accessories Page3）

• 

  Coolant Duct

  YUKIWA SEIKO

  [Features]
  ·Coolant duct for HSK holder
  [Applications]
  ·Used by mounting inside HSK shank as a coolant supply port when using center through coolant

  Days to Ship:	16 Day(s) or more

• 

  Coolant Duct Set Wrench

  YUKIWA SEIKO

  [Features]
  Special accessory for HSK holder
  2 types for HSK40A-SR/HSK63A-SR

  Days to Ship:	16 Day(s) or more

• 

  Flange Holder Clamp Set

  YUKIWA SEIKO

  Clamping and unclamping can be done with a 120° rotation and the holder interchanged with a single action.

  Days to Ship:	16 Day(s) or more

• 

  NY Lock Nut

  YUKIWA SEIKO

  [Features]
  A NY-H type lock nut for EY tool holders.
  ·Type: M type / H type / F type
  ·Supported collets: EY11,EY12,EY16,EY20,EY25,EY32

  Days to Ship:	14 Day(s) or more

• 

  Length Adjustment Screw With Sealing

  YUKIWA SEIKO

  [Features]
  · A length adjustment screw with a urethane end face seal resistant to water-soluble and oil-based cutting fluids is incorporated, enabling processing without losing oil pressure.
  · Replacing the length adjustment screw included in the BT shank, the EY chuck, and other standard components with this length adjustment screw plus seal allows lubrication to be sealed from the rear.
  · Covers 5 mm or more oil hole drills: Ends of 5 to 20 mm oil hole drills can be sealed, enabling support of small diameter oil hole drills as well

  Days to Ship:	16 Day(s) or more

• 

  Single-ended wrench

  YUKIWA SEIKO

  [Features]
  Single-end open-end wrench included to pencil mill chuck
  Available for PCH6, PCH10

  Days to Ship:	16 Day(s) or more

• 

  BS Sleeve

  TAKURA KOGU

  [Features]
  ・ Sleeve for BS shaft
  ·Minimum order quantity: 1 pc.
  ·Inside taper: BS5/BS9
  ·Outside taper: BS9/BS10
  ·Overall length (mm): 132/160

  Days to Ship:	10 Day(s) or more

• 

  Rotary Table (Central Calibration Shaft)

  TRUSCO NAKAYAMA

  [Features]
  · Centering and installation of flange and scroll chucks can be performed easily and accurately as a center correcting shaft is used.

  Days to Ship:	16 Day(s) or more

• 

  Line Master (Rigid Hardening Type), L32-130

  TRUSCO NAKAYAMA

  [Features]
  · It allows easy scribing.
  · Milling chuck and side lock holder can be used to easily attach it to various machines.
  · Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.
  [Applications]
  · Can be attached to milling chucks, etc., for scribing.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Line Master (Rigid Hardening Type), L32-130K

  TRUSCO NAKAYAMA

  It allows easy scribing. Easily attached to any machine

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Line Master (Carbide Tip Type), S32-130

  TRUSCO NAKAYAMA

  [Features]
  · It allows easy scribing.
  · Milling chuck and side lock holder can be used to easily attach it to various machines.
  · Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.
  · The scribe part can be fixed by the lever.
  · A carbide chip is used at the scribe part.
  [Applications]
  · Can be attached to milling chucks, etc., for scribing.

  Days to Ship:	35 Day(s)

• 

  Line Master (Carbide Tip Type), S32-130K

  TRUSCO NAKAYAMA

  It allows easy scribing. A carbide tip is used for the scribe tip

  Days to Ship:	35 Day(s)

• 

  Centering Plate "SUKEITA"【15 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Can be used with great convenience for the centering of all lathes, planing boards, milling machines, shaper presses, and drilling machines when placed underneath various cutting bits, jigs, and other items.
  · It can also be used for thickness adjustment.
  [Applications]
  · For centering work.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Drill Socket [for Morse Taper]

  TRUSCO NAKAYAMA

  [Features]
  · Use to change or extend the size of Morse tapers.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Drilling Machine Sleeve

  TRUSCO NAKAYAMA

  [Features]
  · Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).
  [Applications]
  · Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  turret sleeve

  TRUSCO NAKAYAMA

  [Features]
  · Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.
  [Applications]
  · Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  drill drift

  TRUSCO NAKAYAMA

  [Features]
  · Used for taking out drills from drill sleeves or drill sockets.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Pull Circle (BT30)

  THE CUT

  [Features]
  ·Wrench pull round for exclusive use of pull bolts. With a shape that fits the pull bolt, the pull bolt can be attached and detached safely and securely.
  ·PM-BT30-T can be used with a torque wrench by attaching an adapter.
  [Applications]
  ·Round wrench pull for pull bolt BT30

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Adapter for Pull Circle (BT30)

  THE CUT

  [Features]
  ·Wrench pull round for exclusive use of pull bolts. With a shape that fits the pull bolt, the pull bolt can be attached and detached safely and securely.
  ·PM-BT-30T can be used with a torque wrench by attaching an adapter.
  [Applications]
  ·Torque compatible adapter for pull bolt BT30

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Pull Circle (BT40)

  THE CUT

  [Features]
  ·Safe and easy removal and installation of troublesome pull stud bolts.
  ·Round wrench pull for pull bolt BT40.
  ·Specially designed for a perfect fit.
  ·Easy to put on and take off without applying much force.
  [Applications]
  ·Wrench for pull bolt BT40.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Pull Circle (BT50)

  THE CUT

  [Features]
  ·Safe and easy removal and installation of troublesome pull stud bolts.
  ·Round wrench pull for pull bolt BT50.
  ·Specially designed for a perfect fit.
  ·Easy to put on and take off without applying much force.
  [Applications]
  ·Wrench for pull bolt BT50.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Detachment tool for pull bolt Pull round Bar for exclusive use of Pull round

  THE CUT

  [Features]
  ·Round wrench pull for pull bolt BT40.
  [Applications]
  ·Pull-maru exclusive bar.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Rotary Table T Type Bolt

  TRUSCO NAKAYAMA

  [Features]
  ·T-shaped bolt for adjusting the position of the reference scale.
  ·Weight (g): 150

  Days to Ship:	35 Day(s)

• • On Sale Till 31/03/2025

  

  Centering Plate SUKEITA Loose

  TRUSCO NAKAYAMA

  [Features]
  · Can be used with great convenience for the centering of all lathes, planing boards, milling machines, shaper presses, and drilling machines when placed underneath various cutting bits, jigs, and other items.
  · It can also be used for thickness adjustment.
  [Applications]
  · For centering work.

  	Special Price
  Days to Ship:	Same day or more

• 

  Pull wrench Tip heat treatment

  MANYO TOOLS

  [Features]
  · Easy and certain pull bolt removal and refitting.
  · Wrench does not slip when tightening and removing pull bolts, enabling reliable attachment and detachment.
  · Does not fall off even when the wrench is released.
  · The tip does not distort thanks to the heat treatment.

  Days to Ship:	12 Day(s) or more

• 

  Rotary Table Handle

  TRUSCO NAKAYAMA

  Handle for a rotary table.
  ·Minimum order quantity: 1 pc.
  ·Compatible models: For HV-6/For HV-8

  Days to Ship:	35 Day(s)

• 

  Taper Gauge

  YUKIWA SEIKO

  [Features]
  2 types for collets and tool holders.
  ·Compatible chucks: TQC25/TQC35

  Days to Ship:	16 Day(s) or more

• 

  Locking Part

  YUKIWA SEIKO

  [Features]
  Yukiwa Seiko, Tooling holder related equipment, locking parts (TQC25-SLP, TQC35-SLP)

  Days to Ship:	16 Day(s) or more

• 

  Adjust Screw (For Collet Chuck)

  SHOWA TOOL

  SHOWA TOOL, adjustment screw (for collet chuck)
  Holder length L (mm): 20, 25
  Minimum order quantity: 1 pc.

  Days to Ship:	14 Day(s) or more

• 

  Micro Seal Nut (For Mega Micro Chuck)

  BIG DAISHOWA SEIKI

  [Features]
  Mega micro seal nut for hole drills and mega micro chucks.

  Days to Ship:	12 Day(s) or more

• 

  Mega Wrench (For Mega Chuck Series)

  BIG DAISHOWA SEIKI

  [Features]
  · Even tightening across entire nut periphery using a one-direction clutch.
  · Eliminates risk of the wrench coming off during work.

  Days to Ship:	12 Day(s) or more

• 

  Cleaning Quill

  GIGA SELECTION

  [Features]
  · Can be mounted to an existing machining center (BT/HSK holder type model with through coolant function)
  · Housed in a magazine, is only mounted to the main spindle by ATC when in use, and is removed in the same way
  · Head nozzle is variable from 0 to ±110° (stepless and fixed)
  · Equipped with a fixed bar inside the machine for varying the nozzle angle, and the angle of the arm can be changed automatically when spindle operation X, Y or Z are used so that the arm makes contact with the fixed bar
  · The tip nozzle can swing up to 110° on one side, allowing coolant to also be sprayed on the front side of the spindle
  · Directly mounted on the spindle so it turns when the spindle rotates, allowing repeated spraying via the XY axis
  · When using a horizontal machining center, chip removal is possible in an orthogonal direction with the nozzle at 90°
  · Can be used from the day it is mounted without adding any modifications to the machining center (adjust the nozzle angle manually)
  · Aim the coolant spray at flat sections, including the telescopic cover and machine cover inside the machining center, to provide effective machine maintenance
  · Can be used for many types of chip shapes if the tip nozzle is replaced with a straight or diffusion nozzle (R1/8)

  Days to Ship:	18 Day(s) or more

Loading...