Micrometers（Maximum Measurement Length (Range Selection)：51 to 100）

• 

  342/112/142 Series Point Micrometer

  MITUTOYO

  It is used for measuring trough diameters like drill wave diameters. The standard tip SR of the gauge head is 0.3 mm. Equipped with constant pressure device.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  293 Series, Coolant-proof Micrometer MDC-MX

  MITUTOYO

  [Features]
  · The frame cover and surface panel adopt a non-slip shape (convex) that takes handheld measurements into account.
  · The ratchet thimble improves operability using one hand.
  · Oil-resistant material is used for all plastic parts.
  · With outer measuring surface carbide tip

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Coolant Proof Micrometer

  MITUTOYO

  [Features]
  · Oil-resistant material is used for all plastic components.
  · With origin point-setting function, hold function and zero-setting function.
  · Conforms to CE standards.
  [Applications]
  · For measurements in areas in and around water, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Outer Micrometer, Replaceable Anvil Type

  NIIGATA SEIKI (SK)

  Replacing the anvil enables 1 micrometer to be used for a wide range of measurement work.
  [Features]
  · With only a single unit, the measurement range can be widened by exchanging the anvil.
  · With constant pressure device and carbide tip on measurement surface.
  · The frame has a painted finish.
  [Applications]
  · For extensive measurement.

  Days to Ship:	17 Day(s) or more

• 

  Standard Outer Micrometer MC105/106

  NIIGATA SEIKI (SK)

  Long-life standard outside micrometer, with carbide tipped measurement surface that is resistant to wear.
  [Features]
  · High performance, high cost performance model.
  · Measurement surface has a carbide tip that does not cause wear.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Includes 1 of each reference rod. (Excluding MC105-25)
  [Applications]
  · Can be used for measurement of external dimensions.

  Days to Ship:	1 Day(s)

• 

  343/143 Series, Caliper-type Outside Micrometer OMP-MX/OMP

  MITUTOYO

  [Features]
  · A caliper type that can measure small parts inaccessible to standard micrometer styli.
  · The measuring surface is equipped with a carbide tip. Equipped with a constant pressure device.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digimatic Point Micrometer, Tip Angle: 15°

  MITUTOYO

  [Features]
  · Pointed tips to allow measurement of grooves.
  · Conforms to CE standards.
  [Applications]
  · Used to measure groove diameters, such as the web diameter of drills.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digimatic Non-rotating Spindle Micrometer, Blade Thickness: 0.75 mm

  MITUTOYO

  [Features]
  · The measuring faces are blade types which enable the easy measuring of diameters of thin grooves in rounded objects etc.
  · Conforms to CE standards.
  [Applications]
  · Measuring the diameter of thin grooves in rounded objects.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digimatic Tooth Thickness Micrometer

  MITUTOYO

  [Features]
  · The gear pitch measurable range is from 0.5 to 6 modules.
  · Conforms to CE standards.
  [Applications]
  · Measuring the "root tangent length" of spur gears and helical gears.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  395/115/295 Series One Spherical Face Micrometer

  MITUTOYO

  Measuring surface with cemented carbide tip (BMS-15 has a cemented carbide tip only on the spindle measuring surface)
  With constant pressure device

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Both Spherical Face Micrometer, 395/115/295 Series

  MITUTOYO

  Measurement surface has a carbide alloy tip (BMD-15 has a carbide alloy tip on the spindle measurement surface only). Equipped with constant pressure device.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  331/111/131 series Spline Micrometer

  MITUTOYO

  [Features]
  · Both measuring surfaces are thin for convenient measurement of the groove diameter of spline shafts, etc.
  · The measuring surface is equipped with a carbide tip.
  · Equipped with a constant pressure device.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digital Exterior Micrometer

  NIIGATA SEIKI (SK)

  A micrometer with an easy-to-see digital display.
  [Features]
  · Measurement surface has a carbide tip.
  · Equipped with constant pressure device.
  · Equipped with auto display off function. (Approximately 6 minutes)
  · With heatproof cover. (Excluding MCD130-125 and MCD130-150)
  · The frame has a painted finish.
  · With spherical attachment. (SR2.5)
  · Includes 1 reference rod. (Excluding MCD130-25)
  [Applications]
  · Used for measurement of external dimensions.

  Days to Ship:	18 Day(s) or more

• 

  193 Series, Count External Micrometer M800

  MITUTOYO

  • STOCK

  Days to Ship:	1 Day(s)

• 

  323/123/223 Series Gear Thickness Micrometer

  MITUTOYO

  Measures the "step gear thickness" of spur gears and helical gears.
  With constant pressure device
  With reference bar for base point adjustment (Excluding measuring range 0 to 25 mm)

  • STOCK

  Days to Ship:	1 Day(s)

• 

  369/227/169 series Forward Motion Type Gear Thickness Micrometer

  MITUTOYO

  Measures the "step gear thickness" of spur gears and helical gears. The spindle is a forward motion type. Equipped with a constant pressure device. With a reference rod for reference point adjustment (excluding the measurement range of 0 to 25 mm).

  Days to Ship:	1 Day(s)

• 

  510 Series, Indicating Micrometer IDM-R

  MITUTOYO

  Ideal for the measurement of low-volume multi-model production parts. Design assumes measurement while held in the hand, to achieve stable measurement. It achieves high precision with instruction error of 1 μm and scale interval of 1 μm. Equipped with zero adjustment function. Measurement surface has a carbide alloy tip.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  523 Series, Snap Meter PSM-R

  MITUTOYO

  Ideal for measuring mass-produced parts. Design assumes measurement while mounted to a stand, to achieve stable measurement. It achieves high precision with instruction error of 1 μm and scale interval of 1 μm. Equipped with a slide type workpiece stopper optimum for measuring objects with poor stability.

  Days to Ship:	19 Day(s) or more

• 

  Outside Micrometer (With Calibration Results / Calibration Certificate / Traceability System Image)

  NIIGATA SEIKI (SK)

  Standard type micrometer.
  
  [Features]
  · Measurement surface has a carbide tip.
  · With low-pressure device.
  · The frame has a painted finish.
  · Includes 1 of each reference rod (excluding MC105-25)

  Days to Ship:	25 Day(s) or more

• 

  Digital Exterior Micrometer (IP65 Equivalent)

  NIIGATA SEIKI (SK)

  Waterproof protection degree IP65 specification micrometer ideal for work sites exposed to water and cutting fluid.
  [Features]
  · Water- and dustproof digital micrometer with an IP65 waterproof rating.
  · Ideal for use in workplaces where cooling fluid, cutting fluid, or lubricant are used.
  · Measurement surface has carbide tip.
  · Equipped with constant pressure device.
  · Equipped with auto display off function (after about 6 minutes).
  · Material: frame: spheroidal graphite cast iron, spindle: high carbon chromium bearing steel.
  [Applications]
  · Used for measurement of external dimensions.

  Days to Ship:	21 Day(s) or more

• 

  Digimatic U-Shaped Steel Sheet Micrometer

  MITUTOYO

  [Features]
  · With a long frame that enables deeper measurements.
  · Conforms to CE standards.
  [Applications]
  · For measuring steel sheet thickness.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digimatic Non-Rotating Spindle Type Tooth Thickness Micrometer

  MITUTOYO

  [Features]
  · The gear pitch measurable range is from 0.5 to 6 modules.
  [Applications]
  · Measuring the root tangent length of spur gears and helical gears.

  • STOCK

  Days to Ship:	1 Day(s)

Loading...