Welding Gauges

• 

  Welding gauge WGU-7M/8M

  NIIGATA SEIKI (SK)

  Welding gauge that enables dimension measurement of weld overlay, fillet, leg length, etc. and even undercut depth measurement all in one.
  [Features]
  · Supports measurements when doing various welding work.
  · An extremely easy-to-read structure where the graduations can be read on the same plane.
  · Undercut depth measurement, bevel angle, and opening angle measurement is possible.
  · Enables discrepancy unevenness measurement, fillet leg length measurement, fillet neck thickness measurement, gap measurement, plate thickness measurement, etc.
  · Very convenient for general welding work and welding work on steel frames and assemblies for construction, shipbuilding and bridges, etc.
  [Applications]
  · Used to measure the size, angle, etc. of weld overlay and fillet.

  Days to Ship:	12 Day(s) or more

• 

  Angle Open Tip Gauge

  NIIGATA SEIKI (SK)

  A welding gauge that can be used to measure beveling angles with a precise minimum reading value of 0.5°, compliant with the tolerances of various standards.
  [Features]
  · A product specialized for angle measurement.
  · The sharpened tip also allows measurement of 15 mm or less thin plates with root gap of 0 mm.
  · The opening angle of weld joints can be measured directly with this one piece of equipment. Angle measurements of T-joints can also be performed while avoiding buildup.
  · A large scale that is highly visible at work sites. The minimum scale markings support 0.5 degrees.
  · Featuring a matte silver finish on the face and an easy-to-read scale.
  · Rugged and light for convenient carrying (with plastic case).
  [Applications]
  · Used for measurement of the angles of the butt-welding joint groove and the welding joint.

  Days to Ship:	1 Day(s)

• 

  Angle Protractor

  NIIGATA SEIKI (SK)

  A welding gauge specialized for angle measurement that has three measurement points which support all sorts of angle measurement.
  [Features]
  · Direct measurement can be performed without interference from bulging after press-fitting or buildup after welding.
  · Enables a wide range of measurement of pre- and post-welding parts.
  · Featuring a matte silver finish on the face and easy-to-read scale.
  · Supports the measuring of inside/outside angles in sheet metal folding etc.
  · Rugged and light for convenient carrying (with plastic case).
  [Applications]
  · Used for press-fit area, bending angle of butt-welded joints, flanges, bending angle of sheet metal, etc.

  Days to Ship:	20 Day(s) or more

• 

  Gasket Groove Width Measurement Limit Gauge

  NIIGATA SEIKI (SK)

  A limit gauge for flanges used to install ring joint gaskets, usable with various ring numbers.
  [Features]
  · GO/NO GO standards are in accordance with JPI-7S-23.
  · Flange groove width tolerance: ±0.20 mm.
  · Flange groove depth tolerance: +0.41/0 mm.
  · Flange groove bottom corner radius tolerance: 1.5 mm or less: +0.8 mm / More than 1.5 mm: ±0.8 mm.
  · Angle tolerance: ±0.5°.
  · Material is stainless steel (SUS420J2).
  [Applications]
  · A limit gauge used to determine ring joint gasket mounted flange groove width pass/fail.

  Days to Ship:	16 Day(s) or more

• 

  TRUSCO Welding Gauge TWG-2

  TRUSCO NAKAYAMA

  [Features]
  · TWG-1 high precision model.
  · As it is made of stainless steel, it is rust resistant and robust.
  · Small and includes a hanging case convenient for carrying.
  [Applications]
  · For measurement during welding of all kinds such as general welding, construction, shipbuilding, bridge beams, etc.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Welding gauge WG3/5

  NIIGATA SEIKI (SK)

  Convenient welding gauge that enables dimension measurement of weld overlay, fillet, leg length, etc. all in one.
  [Features]
  · The silver finish reduces reflection when taking photographs.
  · Suitable for speeding up welding work and streamlining quality control.
  · Rugged and light for convenient carrying (with vinyl case).
  · Easy to check because the graduations are on the same plane. Includes a pass chart for inspections.
  · Undercut measurement is also possible.
  · Maintains a sense of stability during measurement through enhanced base thickness.
  [Applications]
  · For measurement of the size, angle, etc. of weld overlay and fillet.

  Days to Ship:	17 Day(s) or more

• 

  Welding gauge AWG-10

  NIIGATA SEIKI (SK)

  Dedicated analog type gauge for measuring throat depth of fillet and height of excess weld metal. An essential item for welding processes.
  [Features]
  · Made of stainless steel for simple anti-rust treatment.
  · Beveling angle: 60°, 70°, 80°, 90°.
  · Fillet throat thickness: 11 mm.
  · Height of excess weld metal: 8 mm.
  · Instrument difference: ±0.2 mm.
  · Minimum read value: 0.1 mm.
  [Applications]
  · Used to determine the size of weld overlay and fillet.

  Days to Ship:	30 Day(s)

• 

  Welding gauge WG-1/WG-2

  NIIGATA SEIKI (SK)

  Welding gauge that is actively used in welding processes.
  [Features]
  · Ideal for speeding up welding work and streamlining quality control.
  · Rugged and light for convenient carrying. (with vinyl case)
  · Easy to check because the graduations are on the same plane.
  · Includes a pass chart for inspections.
  [Applications]
  · Measures the size, angle, etc. of weld overlay and fillet.

  Days to Ship:	16 Day(s) or more

• 

  Welding gauge WGU-2S

  NIIGATA SEIKI (SK)

  The depth and length of the undercut can be measured simply, quickly, and accurately with the weld gauge.
  [Features]
  · Gauge dedicated for undercut depth measurement.
  · Since the undercut probe is threaded, zero point adjustment is possible.
  [Applications]
  · Used to measure the depth and length of weld undercuts.

  Days to Ship:	17 Day(s) or more

• 

  Welding gauge WGU-9M

  NIIGATA SEIKI (SK)

  Welding gauge that enables dimension measurement of weld overlay, fillet, leg length, etc. and even undercut depth measurement all in one.
  [Features]
  · Added measurement functions such as measuring plate thickness, weld bead width, round object diameter, and swelling of reinforcing steel forge welding.
  · Supports new standards released by the Japanese Ministry of Land, Infrastructure, Transport and Tourism.
  · The butt-welding discrepancies are step-measured with a bead straddling width of 53 mm, to widen the range of welding for thick objects.
  · Beveling angle measurement possible over an 0-70° range.
  · The undercut measurement function allows a more accurate measurement than conventional products by polishing the tip of the probe to increase the sharpness.
  [Applications]
  · Used to measure the size, angle, etc. of weld overlay and fillet.

  Days to Ship:	1 Day(s)

• 

  Undercut Gauge

  SHINWASOKUTEI

  [Features]
  For depth measurement in undercut of weld overlay.

  Days to Ship:	16 Day(s) or more

• 

  TRUSCO Welding Gauge TWGU-8M

  TRUSCO NAKAYAMA

  [Features]
  · As it is made of stainless steel, it is rust resistant and robust.
  · Small and includes a hanging case convenient for carrying.
  · Undercut measurement is possible.
  · Has a bulge measurement function after pressure welding.
  · Compatible with new standards released by the Japanese Ministry of Land, Infrastructure, Transport and Tourism, the protruding welding discrepancies are measured with a bead straddling width of 53 mm.
  [Applications]
  · For measurement during welding of all kinds such as general welding, construction, shipbuilding, bridge beams, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  TRUSCO Welding Gauge TWGU-7M

  TRUSCO NAKAYAMA

  [Features]
  · As it is made of stainless steel, it is rust resistant and robust.
  · Small and includes a hanging case convenient for carrying.
  · Undercut measurement is possible.
  · The rotor scales are on the same plane and easy to read.
  [Applications]
  · For measurement during welding of all kinds such as general welding, construction, shipbuilding, bridge beams, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Welding gauge (for measuring precise undercuts)

  TRUSCO NAKAYAMA

  [Features]
  · Undercut dedicated gauge, high precision type.
  · As it is made of stainless steel, it is rust resistant and robust.
  · Small and includes a hanging case convenient for carrying.
  [Applications]
  · For measurement during welding of all kinds such as general welding, construction, shipbuilding, bridge beams, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  welding gauge

  TRUSCO NAKAYAMA

  [Features]
  · As it is made of stainless steel, it is rust resistant and robust.
  · Small and includes a hanging case convenient for carrying.
  [Applications]
  · For measurement during welding of all kinds such as general welding, construction, shipbuilding, bridge beams, etc.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  TRUSCO Welding Gauge TAWG-10

  TRUSCO NAKAYAMA

  [Features]
  · Measurement gauge for height of excess weld metal, throat depth of fillet, and included angle.
  · Lightweight, compact type.
  [Applications]
  · For measurement during welding of all kinds such as general welding, construction, shipbuilding, bridge beams, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Angle Limit Gauge

  NIIGATA SEIKI (SK)

  Limit welding gauge for measuring joint opening angle and butt-welding joint opening angle. An essential item for welding processes.
  [Features]
  · The leg length shows the tolerance limit dimensions at the measured throat thickness dimensions.
  · Pass/fail determination is easy with boundary dimension values displayed. (2.5° Angle Increment, Throat Thickness 1 mm Increment)
  · With plastic case and ball chain.
  · All measurement ranges are selected based on what dimensions are used most frequently in the field.
  [Applications]
  · Used for measuring the beveling angle (inner angle) of T joints and butt-weld joints, fillet leg length (height) measurement, and throat depth measurement.

  Days to Ship:	21 Day(s) or more

• 

  Welding gauge FDW-1

  NIIGATA SEIKI (SK)

  The depth and length of the undercut can be measured simply, quickly, and accurately with the weld gauge.
  [Features]
  · A dedicated dial gauge type for measuring undercut depth.
  · High-precision measurements can be made using the dial gauge.
  · Allows stable measurement thanks to three-point support.
  [Applications]
  · For weld undercut measurement only.

  Days to Ship:	21 Day(s) or more

• 

  Welding Gauge

  BLUEBIRD

  [Features]
  · Leg Length Gauge
  [Applications]
  · Thickness measurement of welding flux
  · For measurement of tilt angle and plate thickness

  Days to Ship:	9 Day(s) or more

• 

  Gasket Groove Width/Height Measurement Limit Gauge

  NIIGATA SEIKI (SK)

  A limit gauge that can be used with various ring numbers to determine ring joint gasket width/height pass/fail.
  [Features]
  · GO/NO GO standards are in accordance with JPI-7S-23.
  · Gasket width tolerance: ±0.20 mm.
  · Gasket height tolerance: ±0.5 mm.
  · Octagonal angle radius tolerance: ±0.5 mm.
  · Material is stainless steel (SUS420J2).
  [Applications]
  · Determines ring joint gasket mounted flange groove width pass/fail.

  Days to Ship:	16 Day(s) or more

• 

  Angle Gauge

  NIIGATA SEIKI (SK)

  Days to Ship:	1 Day(s)

• 

  Welding Gauge

  NIIGATA SEIKI (SK)

  Days to Ship:	1 Day(s)

Loading...