Weighing Instruments（Main applications：Peripheral Equipment）

• 

  Measuring Data Logger

  A&D

  [Features]
  · Stores the measurement value of electronic balances or scales.
  · For remote locations, cleanrooms, and the use of multiple measuring instruments.
  · It can save approx. 5,000 measurement data events with date and time.
  · Stored weighing data can be easily loaded via CSV file from USB port to PC (no need for dedicated software).
  · A dedicated power supply is not required (can be used by simply connecting to a meter or PC).
  · Suitable for locations where PC and printer cannot be brought in, such as remote locations and cleanrooms.

  Days to Ship:	10 Day(s) or more

• 

  RS-232C Cable (Connector Shape: DIN)

  A&D

  [Features]
  · A cable for connecting a balance or scale to computers, etc. The cable used varies depending on the connector shape of the device you are connecting to.

  Days to Ship:	16 Day(s) or more

• 

  RS-232C Cable (Connector Shape: D-Sub 9 Pin)

  A&D

  [Features]
  · A cable for connecting a balance or scale to computers, etc. The cable used varies depending on the connector shape of the device you are connecting to.

  Days to Ship:	8 Day(s) or more

• 

  AD-4532B Digital Indicator For Strain Gauge Sensor

  A&D

  The AD-4532B is an indicator that transforms the voltage signal from the sensor (strain gauge) into a digital display at high speed.
  Since it performs high speed A/D conversion (2,000 times/s), it is ideal for measuring dynamic phenomenon like load, pressure, displacement, torque, etc.
  · 2,000 times/s high speed A/D, D/A conversion function
  · Enhanced comparator function
  In addition to simple upper/lower limit comparison, it is equipped with a 2D comparator function that can switch between 5 upper/lower limit levels using time control or an external signal
  · Digital span correction is possible without relying on actual load
  · Display, comparator output and D/A voltage output can be latched (data output held)
  · A long life MOSFET relay is used for the relay output

  Days to Ship:	16 Day(s) or more

• 

  Slotted Loose-Weight Type (Non-Magnetic Stainless Steel)

  SHINKODENKI

  [Features]
  · Used for calibrating weight-measurements of suspension-type weighing instruments.
  · Non-slip level and grooved for increased stability. Multiple weights can be stacked.

  Days to Ship:	17 Day(s) or more

• 

  Load Foot For LCM13/LCM19 Series

  A&D

  A stainless steel swivel foot suitable for floor scales, etc.
  By using it in combination with a beam type load cell, floor scales, etc., with a simple structure can be manufactured.

  Days to Ship:	19 Day(s) or more

• 

  Standard Cylindrical Weight (Made of Stainless Steel)

  SHINKODENKI

  [Features]
  · Material is stainless steel with excellent corrosion and wear resistance, and conforms to the Measurement Act of Japan and JIS standards, etc.
  · JIS B 7609 standard product.
  [Applications]
  · Inspection and calibration of measuring instruments at ISO certified factories.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Balance Weight (Stainless Steel / M1 Grade)

  SHINKODENKI

  [Features]
  · Several can be stacked, making them ideal for use as practical reference weights during calibration and inspection of electronic scales and weighing machines.
  · JIS B 7609 standard product.
  [Applications]
  · Inspection and calibration of measuring instruments at ISO certified factories.

  Days to Ship:	16 Day(s) or more

• 

  LCC21 Series Ultra-Compact Compression Type Button Load Cell

  A&D

  [Features]
  · Compression type.
  · Optimal for measuring load distribution.
  · Ideal for measuring press fitting and press pressure changes.
  · Includes cell mounting bracket.
  · Rated capacity: 100 N (10.20 kg) to 1 kN (102.0 kg).
  · Button switch pressure measurement.
  · Keyboard inspection.
  · Tableting machine pressure measurement.
  · Press machine pressure measurement.
  · Crimping force measurement.
  · Spring pressure measurement.
  · Robot force sensors.
  · Robot load sensors.
  · Component force measurement.
  · Health appliance force measurement.

  Days to Ship:	10 Day(s) or more

• 

  AD-4386 Series Pressure-Resistant Explosion-Proof Type Summing Junction Box

  A&D

  [Features]
  · Allows 2 to 4 pressure-resistant explosion-proof load cells to be connected in parallel.
  · Built-in potentiometer for adjusting load cell output.

  Days to Ship:	12 Day(s) or more

• 

  Rod End Bearing For LC1205/LC1216/LC1122 Series

  A&D

  [Features]
  · Peripheral equipment for use with the LC1205/LC1216/LC1122 series.

  Days to Ship:	16 Day(s) or more

• 

  Load cell cable

  A&D

  Basically, this cable is used to connect a summing box and an indicator when building a system using several load cells and an indicator.

  Days to Ship:	11 Day(s) or more

• 

  OIML Type Standard Weight, Cylindrical / Plate Shape

  MURAKAMI KOKI

  [Features]
  · A weight made from non-magnetic stainless steel, based on the OIML (International Organization of Legal Metrology) R111-1:2004 standards. Conforms with the Japanese Industrial Standard "JISB7609:2008".
  · F1, F2, M1, M2 class weights have the new JIS mark (indicating conformance with JIS standards.) (E2 class weights are outside the scope of JIS)
  [Applications]
  · Calibrating scales and weights.
  · Equipment for ISO9000/14000 series certification.
  · GMP validation systems.
  · Equipment for introducing an HACCP plan.

  Days to Ship:	18 Day(s) or more

• 

  Quick USB Adapter

  A&D

  [Features]
  · Sends the measurement values of electronic balances or scales to PCs in real time.
  · Transmission is possible without special software.
  · Measurement data from the RS-232C can be transferred to a PC (USB port) in real time.
  · Provides stable communication as it is not tied to any given PC OS.
  · Measurement data can easily be directly input into Excel and Word (no dedicated software necessary).
  · An IP65 drip- and dust-proof structure in transport.
  · 4 connecting cables are supplied (RS-232C-25P/9P/DIN, USB extension cable).
  · Supports A&D-type scales and all measuring scales.

  Days to Ship:	16 Day(s) or more

• 

  Balance Weight (Stainless Steel / F2 Grade)

  SHINKODENKI

  [Features]
  · Several can be stacked, making them ideal for use as practical reference weights during calibration and inspection of electronic scales and weighing machines.
  · JIS B 7609 standard product.
  [Applications]
  · Inspection and calibration of measuring instruments at ISO certified factories.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Pillow Weight (Stainless Steel) Grade F2

  SHINKODENKI

  [Features]
  ·Made of non-magnetizable (non-magnetic) stainless steel, it has little interference with the iron parts of electronic balances and the generated magnetic field, making it suitable for inspection, inspection, and calibration of high-performance electronic balances.
  ·Easy to handle and carry.
  ·Stacking is easy.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Pillow weight (cast iron) M1 grade

  SHINKODENKI

  [Features]
  · Even though it is made of stainless steel, it is reasonably priced and rust resistant, which makes it ideal for periodic inspections and regular inspections at sites where a lot of chemicals or liquids are used (marine products, food products, chemicals).

  Days to Ship:	16 Day(s) or more

• 

  Pillow Type Counterweight (Cast Steel)

  SHINKODENKI

  [Features]
  · Inexpensive iron construction, intended for daily site inspection. (Requires yearly weight inspection / calibration)

  Days to Ship:	22 Day(s) or more

• 

  Digital Shower-Proof Scale AC Adapter

  CUSTOM

  [Features]
  · AC adapter dedicated for CS-WP and CS-S digital scales.

  Days to Ship:	22 Day(s)

• 

  Rechargeable Battery Unit: AD-1682

  A&D

  [Features]
  · Allows scale to be used in areas without a power supply

  Days to Ship:	20 Day(s) or more

• 

  Conveyor Drop Type Sorter For AD-4961-2KD-2035

  A&D

  Conveyor drop type sorting machine dedicated to weight checker AD-4961 series.
  [Features]
  ·An air cylinder is used to move the conveyor up and down, sorting items in two directions (one discharge direction and one straight direction).
  [Applications]
  ·Sorting machine.

  Days to Ship:	Quote

• 

  AD-1689 Tweezers For Weight Operation

  A&D

  [Features]
  · Minimizes the influence of body temperature, which becomes an issue when calibrating analysis balances
  · Allows you to easily and accurately manipulate 1 g to 500 g weights, reducing fatigue during calibration work
  · Overall length: 210 mm
  · Includes tweezer tip cap for balance calibration
  · Material: SUS304

  Days to Ship:	16 Day(s) or more

• 

  Intrinsically Safe Explosion-Proof Structure Type Data Logger DLZ-200

  SHINKODENKI

  [Features]
  · Uses IR (infrared ray) communication to send measurement data from dangerous areas to non-dangerous areas where it then saves it
  · Can store up to 3,000 measurement data entries
  · Input the lot number and code number in alphabet, and construct record data linked with measurement date and time
  · Directly send and output measurement data to the manufacturer's IR communication printer
  · IP65 standard-compliant dust-proof and water-proof structure

  Days to Ship:	12 Day(s) or more

• 

  Remote Comparator For Electronic Weighing Instrument RC-1

  SHINKODENKI

  [Features]
  · The weighing instrument changes to a quantitative checker
  · High-functioning comparator that prints the judgment result from the printer side and weighing instrument side to make it easy to judge whether the product is okay or defective
  · Easily determine the absolute value and deviation value
  · Register up to 50 sets of judgment values ("Standard value and max./min. width" or "Max./min. values")
  · Triple display for easy viewing of 2 different judgment values and the weight
  · Bar display and loud buzzer
  · Hold function for fixing the display, even after the object being weighed has been removed

  Days to Ship:	18 Day(s) or more

• 

  Reference Weight Type Cylindrical Weight

  SHINKODENKI

  [Features]
  · A commonly used weight in Japan for many years.
  · Complies with the Measurement Act of Japan and JIS standards.
  · Similar to OIML types, the weight can be turned into a reference weight or a JCSS standard weight by passing the Inspection of Verification Standards for measurement device inspections etc., or if calibration is performed by a JCSS registered company.

  Days to Ship:	17 Day(s) or more

• 

  Disc-Shaped Weight (Non-Magnetic Stainless Steel)

  SHINKODENKI

  [Features]
  · Non-slip level and grooved for increased stability. Multiple weights can be stacked.

  Days to Ship:	17 Day(s) or more

• 

  Disc-Shaped Weight (Brass, Chrome Plated)

  SHINKODENKI

  [Features]
  · Non-slip level and grooved for increased stability. Multiple weights can be stacked.

  Days to Ship:	17 Day(s) or more

• 

  Pillow Type Weight (Non-Magnetic Stainless Steel)

  SHINKODENKI

  [Features]
  · Suitable for calibrating large weighing capacity weighing instruments.
  · Comes with handle for easy carrying and stacking.
  · Ideal for use as a practical reference weight and as a practical standard weight.

  Days to Ship:	17 Day(s) or more

• 

  Pillow Type Weight Standalone Case (Aluminum)

  SHINKODENKI

  [Features]
  ·Case for carrying and storing delicate weights.
  ·It preserves the precision and beauty of weights and allows safe storage.

  Days to Ship:	23 Day(s) or more

• 

  Pillow Type Weight (Stainless Steel)

  SHINKODENKI

  [Features]
  · Suitable for calibrating large weighing capacity weighing instruments.
  · Comes with handle for easy carrying and stacking.
  · Ideal for use as a practical reference weight and as a practical standard weight.

  Days to Ship:	17 Day(s) or more

• 

  Slotted Loose-Weight Type (Brass, Chrome Plated)

  SHINKODENKI

  [Features]
  · Used for calibrating weight-measurements of suspension-type weighing instruments.
  · Non-slip level and grooved for increased stability. Multiple weights can be stacked.

  Days to Ship:	17 Day(s) or more

• 

  Grip For Weights

  SHINKODENKI

  [Features]
  · Grip for easy handling of even heavy weights.

  Days to Ship:	23 Day(s) or more

• 

  Fork For Weights

  SHINKODENKI

  [Features]
  · Fork for easy handling of even heavy weights.

  Days to Ship:	23 Day(s) or more

• 

  Ionizer STABLO-AP

  SHIMADZU

  [Features]
  · A high-performance, wind-less ionizer

  Days to Ship:	16 Day(s) or more

• 

  AC Adapter For Balance / Platform Scale

  A&D

  AC adapter for A&D scales and platform scales.
  Compatible models, series: EK-G/EK-H/EW-G/EK-A/EW-A/ET-120A/AD-1681

  Days to Ship:	16 Day(s) or more

• 

  [A&D]Sensitive Anemometer, AD-1641

  A&D

  [Features]
  · Simultaneously measures air flow, temperature, humidity, atmospheric pressure and vibration, and saves them in chronological order.
  · Check and record air flow in enclosures, draft chambers, etc.
  · Can sound a buzzer to indicate danger if the specified air speed falls below the lower limit value.
  · Analysis balance operating environment evaluation.
  · For environmental measurement in research facilities, or when breeding plants and animals.

  Days to Ship:	17 Day(s) or more

• 

  LCCA21 Series Button Type Load Cell With Amplifier

  A&D

  [Features]
  · Compression type.
  · Optimal for measuring load distribution.
  · Ideal for measuring press fitting and press pressure changes.
  · Includes cell mounting bracket and amplifier case mounting bracket.
  · Rated capacity: 100 N (10.20 kg) to 1 kN (102.0 kg).
  · Analog output with amplification makes weight calibration unnecessary.
  · Optimal for measuring load distribution.
  · For button switch pressure measurement.
  · For component force measurement.

  Days to Ship:	16 Day(s) or more

• 

  AD-4387 Pressure-Resistant Explosion-Proof Junction Box

  A&D

  [Features]
  · A junction box for extension when the pressure-resistant explosion-proof load cell and indicator are far apart.
  · Compact and lightweight for ease of use.
  · Explosion class and ignition temperature conform to [Exd II BT4], suitable for use in class 1 and class 2 areas.
  * There is no fatigue detection number since it has no electrical contacts.
  · Dust-proof and waterproof to IP65.

  Days to Ship:	20 Day(s) or more

• 

  AD-4379SUS All Stainless Steel Summing Junction Box

  A&D

  [Features]
  · Stainless steel (SUS304) design, and dust-proof and waterproof to IP67.
  · Can be connected to up to 4 inputs.
  · Includes a sensitivity adjustment trimmer for load cell output.
  · Supports ø4 to ø12 load cell cables.

  Days to Ship:	23 Day(s) or more

• 

  AD-4382 Summing Junction Box

  A&D

  [Features]
  · Specifically for connecting 2 load cells.
  · Dust-proof and waterproof to IP56.
  · Includes a sensitivity adjustment trimmer for load cell output.

  Days to Ship:	16 Day(s) or more

• 

  AD-4380SUS Junction Box

  A&D

  [Features]
  · A junction box for extension.
  · Stainless steel (SUS304) design, and dust-proof and waterproof to IP67.
  · Without sensitivity adjustment trimmer for load cell output.

  Days to Ship:	16 Day(s) or more

• 

  AD-4380 Junction Box

  A&D

  [Features]
  · A junction box for extension.
  · Dust-proof and waterproof to IP56.
  · Without sensitivity adjustment trimmer for load cell output.

  Days to Ship:	12 Day(s) or more

• 

  Mounting Bracket With Built-In Bracing Mechanism For CP/CP-FP Series

  A&D

  The LCZAP series is a mounting bracket with a built-in anti-vibration mechanism that is used in combination with A&D compression load cells.

  Days to Ship:	16 Day(s) or more

• 

  Brace With Built-In Lift Prevention Mechanism For LCM13/LCM19 Series

  A&D

  A stainless steel mounting bracket for beam-type load cells with anti-vibration and anti-floating functions.

  Days to Ship:	11 Day(s) or more

• 

  Accessory For CP/C2Z1/C2F1/CMX Series

  A&D

  [Features]
  · Peripheral equipment for use with the CP/C2Z1/C2F1/CMX series.

  Days to Ship:	10 Day(s) or more

Loading...