Pressure Gauges（Application：Other）

• 

  General Steam Pressure Gauge (A Type Vertical Type / ø60)

  MIGISHITA SEIKI

  [Features]
  · Features outstanding durability.
  · Can be used with vapor.
  · JIS B 7505-1 standard product.
  · Items with various performances can be manufactured depending on the application.

  Days to Ship:	16 Day(s) or more

• 

  Micro Manometer (A Frame Vertical Type/ø75)

  MIGISHITA SEIKI

  A measuring instrument for measuring low pressure that cannot be measured with a Bourdon tube pressure gauge.
  [Features]
  ・ Small pressure can be read.
  [Applications]
  ·Mainly for gases and gases.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Yamamoto Electric Manufacturing Manostar Gauge (High Performance Micro Differential Pressure Gauge) WO81FN Series

  AS ONE

  【Product Specifications】
  ・Model number： WO81FN300D
  ・Range： 0 - 300Pa
  ・Position for installing Vertical installing from upward horizontal is optional
  ・Accuracy： +/-1.5%FS
  ・Pressure measuring method： Differential pressure type
  ・Element method： Diaphragm method (silicone rubber)
  ・Weight： Approx 270g
  ・Scale method： 270° wide angle instruction (scale length 170mm)
  ・Cap polarity： Back side pipe of left and right 2 sides of polarity is also available by replacing cap of high pressure red seal and low pressure blue seal.
  ・Instrument body withstand pressure： About 0.2MPa
  ・Vibration resistance： 5 - 10Hz, 10mm, 10 - 50Hz, acceleration total amplitude 39m/s^2 (3 axis directions 2h each)
  ・Impact resistance： 100m/s^2 (3 axis directions 6 times each)
  ・Applicable gas atmosphere： Air and noncorrosive gas (liquid disabled)
  ・Connection port： POM (polyacetal) made hose nipple (outer diameter φ7mm)
  ・Ambient temperature range： -10 to +50℃
  ・Usage ambient humidity： 90%RH or less

  Days to Ship:	16 Day(s) or more

• 

  fujifilm prescale

  AS ONE

  【Product Specifications】
  ・Model number： LLLW
  ・Measurement range (MPa)： 0.20 - 0.6
  ・Type： Two Sheet type
  ・Accuracy： +/-10% or less (in concentration meter measurement)
  ・Width x length： 270mm x 4m
  ・Usage： Cut prescale in the desired shape, Combine A Film and C Film, And nip measurement position in them and pressurize to come out.

  Days to Ship:	16 Day(s) or more

• 

  General Vertical Type Pressure Gauge Without Flange (A Type)

  MIGISHITA SEIKI

  [Features]
  · Pressure gauges designed and manufactured based on the JIS B 7505-1 Bourdon tube pressure gauge standard.
  · Manufactured for 7 performance factors according to use and objective: normal, for steam, for heat resistance, for vibration resistance, for steam and vibration resistance, for heat and vibration resistance, and dynamic pressure.
  · Product is already type-approved and certification-ready.
  · The accuracy of the Bourdon tube pressure gauge is JIS B 7505-1 Bourdon tube pressure gauge accuracy. Can be manufactured to 0.6, 1.0, 1.6, and 2.5 accuracy classifications.
  · The casing is electrodeposition coated on the SPC for excellent corrosion resistance.

  Days to Ship:	14 Day(s) or more

• 

  General-Purpose Embedded Type Pressure Gauge, Front Flange (FDU Type)

  MIGISHITA SEIKI

  [Features]· Pressure gauge naming system
  Naming is determined depending on the type, performance, model, connection part shape, connection screw diameter, scale plate size and maximum scale graduation. However, as standard products, the ø60 has no flange, and the ø75, ø100 and ø150 are intermediate flange types. Be sure to specify for non-standard products.
  Units with central screws are only manufactured with an outer diameter of ø50 or ø60.
  
  Example: Front Flange Type Pressure Gauge, Double-Chamfered 3/8", Outer Diameter 100 mm, Maximum Graduation 60 MPa
  How to order
  Pressure Gauge: FDU3/8 ø100 × 60 MPa.
  Compound Gauge: DRU3/8 ø100 × 1.6 MPa × -0.1 MPa.
  Vacuum Gauge: FDU3/8 ø100 × -0.1 MPa.

  Days to Ship:	16 Day(s) or more

• 

  General Embedded Type Pressure Gauge, Intermediate Flange (DRU Type)

  MIGISHITA SEIKI

  [Features]· Pressure gauge naming system
  Naming is determined depending on the type, performance, model, connection part shape, connection screw diameter, scale plate size and maximum scale graduation. However, as standard products, the ø60 has no flange, and the ø75, ø100 and ø150 are intermediate flange types. Be sure to specify for non-standard products.
  Units with central screws are only manufactured with an outer diameter of ø50 or ø60.
  
  Example: Front Flange Type Pressure Gauge, Double-Chamfered 3/8", Outer Diameter 100 mm, Maximum Graduation 60 MPa
  How to order
  Pressure Gauge: FDU3/8 ø100 × 60 MPa.
  Compound Gauge: DRU3/8 ø100 × 1.6 MPa × -0.1 MPa.
  Vacuum Gauge: FDU3/8 ø100 × -0.1 MPa.

  Days to Ship:	14 Day(s) or more

• 

  General Vibration Proof Pressure Gauge (B Type Vertical Type / ø75)

  MIGISHITA SEIKI

  General pressure gauges designed and manufactured based on the JIS B 7505-1 Bourdon tube pressure gauge standard.
  [Features]
  ・ The case and cover are electrodeposited for excellent durability.
  [Applications]
  ・ The fluid can be used for air, oil or water.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  General Vertical Type Pressure Gauge Without Flange (A Type), Pressure Gauge

  MIGISHITA SEIKI

  [Features]
  · Pressure gauges designed and manufactured based on the JIS B 7505-1 Bourdon tube pressure gauge standard.
  · Manufactured for 7 performance factors according to use and objective: normal, for steam, for heat resistance, for vibration resistance, for steam and vibration resistance, for heat and vibration resistance, and dynamic pressure.
  · Product is already type-approved and certification-ready.
  · The accuracy of the Bourdon tube pressure gauge is JIS B 7505-1 Bourdon tube pressure gauge accuracy. Can be manufactured to 0.6, 1.0, 1.6, and 2.5 accuracy classifications.
  · The casing is electrodeposition coated on the SPC for excellent corrosion resistance.
  

  Days to Ship:	16 Day(s) or more

• 

  BA Series Micromanometer Bayonet Case

  DAIICHIKEKI

  [Features]
  · Zero point preparation mechanism equipped as standard.
  · Mass produced for high quality and controlled costs.
  [Applications]
  · Indicator measures micro pressure at 50 kPa or less.

  Days to Ship:	14 Day(s) or more

• 

  IPT General Pressure Gauge, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Type approval has been received based on the new Japanese Measurement Act, which ensures high reliability and a diverse range of applicable fields.
  · The product is easy to handle and has excellent durability.
  [Applications]
  · Comes in a variety of sizes, case configurations and pressure ranges for easy model selection.

  Days to Ship:	15 Day(s) or more

• 

  IPT General Pressure Gauge, Vibration-Proof Type, Rounded Edge Type (B)

  DAIICHIKEKI

  [Features]
  · Type approval has been received based on the new Japanese Measurement Act, which ensures high reliability and a diverse range of applicable fields.
  · Used in areas with vibration.
  [Applications]
  · Comes in a variety of sizes, case configurations and pressure ranges for easy model selection.

  Days to Ship:	16 Day(s) or more

• 

  IPT General Pressure Gauge, SUS Type, Vibration-Proof Type, Embedded Type (D, FD)

  DAIICHIKEKI

  [Features]
  · Uses stainless steel for wetted parts.
  · Used in areas with vibration.
  [Applications]
  · This product can measure corrosive fluids.

  Days to Ship:	21 Day(s) or more

• 

  IPT General Compound Gauge, Vibration-Proof Type, Embedded Type (D)

  DAIICHIKEKI

  [Features]
  · Type approval has been received based on the new Japanese Measurement Act, which ensures high reliability and a diverse range of applicable fields.
  · Used in areas with vibration.
  [Applications]
  · Comes in a variety of sizes, case configurations and pressure ranges for easy model selection.

  Days to Ship:	21 Day(s) or more

• 

  General Steam Pressure Gauge (B Type Vertical Type / ø100)

  MIGISHITA SEIKI

  [Features]
  · Features outstanding durability.
  · Can be used with vapor.
  · JIS B 7505-1 standard product.
  · Items with various performances can be manufactured depending on the application.

  Days to Ship:	11 Day(s) or more

• 

  General Vertical Type Pressure Gauge Without Flange (A-Type), Vacuum Gauge

  MIGISHITA SEIKI

  [Features]
  · Pressure gauges designed and manufactured based on the JIS B 7505-1 Bourdon tube pressure gauge standard.
  · Manufactured for 7 performance factors according to use and objective: normal, for steam, for heat resistance, for vibration resistance, for steam and vibration resistance, for heat and vibration resistance, and dynamic pressure.
  · Product is already type-approved and certification-ready.
  · The accuracy of the Bourdon tube pressure gauge is JIS B 7505-1 Bourdon tube pressure gauge accuracy. Can be manufactured to 0.6, 1.0, 1.6, and 2.5 accuracy classifications.
  · The casing is electrodeposition coated on the SPC for excellent corrosion resistance.

  Days to Ship:	16 Day(s) or more

• 

  General Vertical Type Pressure Gauge, Round Flange (B Type)

  MIGISHITA SEIKI

  [Features]
  · Pressure gauges designed and manufactured based on the JIS B 7505-1 Bourdon tube pressure gauge standard.
  · Manufactured for 7 performance factors according to use and objective: normal, for steam, for heat resistance, for vibration resistance, for steam and vibration resistance, for heat and vibration resistance, and dynamic pressure.
  · Product is already type-approved and certification-ready.
  · The accuracy of the Bourdon tube pressure gauge is JIS B 7505-1 Bourdon tube pressure gauge accuracy. Can be manufactured to 0.6, 1.0, 1.6, and 2.5 accuracy classifications.
  · The casing is electrodeposition coated on the SPC for excellent corrosion resistance.

  Days to Ship:	15 Day(s) or more

• 

  General Embedded Type Pressure Gauge, Intermediate Flange (DRU Type), Compound Gauge

  MIGISHITA SEIKI

  [Features]· Pressure gauge naming system
  Naming is determined depending on the type, performance, model, connection part shape, connection screw diameter, scale plate size and maximum scale graduation. However, as standard products, the ø60 has no flange, and the ø75, ø100 and ø150 are intermediate flange types. Be sure to specify for non-standard products.
  Units with central screws are only manufactured with an outer diameter of ø50 or ø60.
  
  Example: Front Flange Type Pressure Gauge, Double-Chamfered 3/8", Outer Diameter 100 mm, Maximum Graduation 60 MPa
  How to order
  Pressure Gauge: FDU3/8 ø100 × 60 MPa.
  Compound Gauge: DRU3/8 ø100 × 1.6 MPa × -0.1 MPa.
  Vacuum Gauge: FDU3/8 ø100 × -0.1 MPa.

  Days to Ship:	16 Day(s) or more

• 

  GRK Glycerin Added Pressure Gauge, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	11 Day(s) or more

• 

  MPK Metal Closed Pressure Gauge SUS, Vibration-Proof Type, Rounded Edge Type (B)

  DAIICHIKEKI

  [Features]
  · Comes with a sealed metal case for use outdoors or in areas with high humidity or dust.
  · Uses stainless steel for wetted parts.
  [Applications]
  · Used in areas with vibration.

  Days to Ship:	21 Day(s) or more

• 

  MPP Plastic Closed Pressure Gauge SUS, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Comes with a sealed resin case for use outdoors or in areas with high humidity or dust.
  · Uses stainless steel for wetted parts.
  [Applications]
  · This product can measure corrosive fluids.

  Days to Ship:	11 Day(s) or more

• 

  Pipe Siphon

  DAIICHIKEKI

  [Features]
  · This product for heat radiation is used for measured fluids with a high temperature, such as vapor.
  · This product is a union type, allowing the pressure gauge direction to be determined.
  [Applications]
  · Joint mounted between the gauge cock and piping.

  Days to Ship:	14 Day(s) or more

• 

  General Purpose Pressure Gauge (A Frame Vertical Type / Diameter ø75)

  MIGISHITA SEIKI

  A general-purpose pressure gauge used to measure air, water, oil, etc. for constant pressure measurement.
  [Features]
  ·For constant pressure measurements where the rate of instantaneous pressure change does not exceed 3% of full scale per second.
  ·High quality, high performance.
  ·The case and cover are electrodeposition coated for excellent durability.
  [Applications]
  ・ The fluid can be used for air, oil or water.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  General Vibration Proof Pressure Gauge (A Frame Vertical Type / ø60)

  MIGISHITA SEIKI

  [Features]
  · Features outstanding durability.
  · Improved vibration resistance.
  · Resistant to fluid pulsation.
  · JIS B 7505-1 standard product.
  · Items with various performances can be manufactured depending on the application.
  [Applications]
  · Constant pressure measurement of gas or liquid

  Days to Ship:	8 Day(s) or more

• 

  General Vibration Proof Pressure Gauge (B Type Vertical Type / ø100)

  MIGISHITA SEIKI

  [Features]
  · Features outstanding durability.
  · Improved vibration resistance.
  · Resistant to fluid pulsation.
  · JIS B 7505-1 standard product.
  · Items with various performances can be manufactured depending on the application.

  Days to Ship:	16 Day(s) or more

• 

  General Steam Pressure Gauge (B Type Vertical Type / ø75)

  MIGISHITA SEIKI

  General pressure gauges designed and manufactured based on the JIS B 7505-1 Bourdon tube pressure gauge standard.
  [Features]
  ·The case and cover are electroplated.
  ·Excellent durability.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  General Vertical Type Pressure Gauge, Round Flange (B Type), Compound Gauge

  MIGISHITA SEIKI

  [Features]
  · Pressure gauges designed and manufactured based on the JIS B 7505-1 Bourdon tube pressure gauge standard.
  · Manufactured for 7 performance factors according to use and objective: normal, for steam, for heat resistance, for vibration resistance, for steam and vibration resistance, for heat and vibration resistance, and dynamic pressure.
  · Product is already type-approved and certification-ready.
  · The accuracy of the Bourdon tube pressure gauge is JIS B 7505-1 Bourdon tube pressure gauge accuracy. Can be manufactured to 0.6, 1.0, 1.6, and 2.5 accuracy classifications.
  · The casing is electrodeposition coated on the SPC for excellent corrosion resistance.

  Days to Ship:	16 Day(s) or more

• 

  General-Purpose Embedded Type Pressure Gauge, Front Flange (FDU Type), Compound Gauge

  MIGISHITA SEIKI

  [Features]· Pressure gauge naming system
  Naming is determined depending on the type, performance, model, connection part shape, connection screw diameter, scale plate size and maximum scale graduation. However, as standard products, the ø60 has no flange, and the ø75, ø100 and ø150 are intermediate flange types. Be sure to specify for non-standard products.
  Units with central screws are only manufactured with an outer diameter of ø50 or ø60.
  
  Example: Front Flange Type Pressure Gauge, Double-Chamfered 3/8", Outer Diameter 100 mm, Maximum Graduation 60 MPa
  How to order
  Pressure Gauge: FDU3/8 ø100 × 60 MPa.
  Compound Gauge: DRU3/8 ø100 × 1.6 MPa × -0.1 MPa.
  Vacuum Gauge: FDU3/8 ø100 × -0.1 MPa.

  Days to Ship:	16 Day(s) or more

• 

  Micromanometer

  MIGISHITA SEIKI

  [Features] A measuring instrument used to measure low pressures (low vacuums) that cannot be measured using a Bourdon tube pressure gauge.

  Days to Ship:	16 Day(s) or more

• 

  GRK Glycerin Added Pressure Gauge, Rounded Edge Type (B)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	17 Day(s) or more

• 

  GRK Glycerin Added Pressure Gauge, Embedded Type (D)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	17 Day(s) or more

• 

  GRK Glycerin Added Vacuum Gauge, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	16 Day(s) or more

• 

  GRK Glycerin Added Vacuum Gauge, Rounded Edge Type (B)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	17 Day(s) or more

• 

  GRK Glycerin Added Vacuum Gauge, Embedded Type (D)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	17 Day(s) or more

• 

  GRK Glycerin Added Compound Gauge, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	17 Day(s) or more

• 

  GRK Glycerin Added Compound Gauge, Rounded Edge Type (B)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	17 Day(s) or more

• 

  GRK Glycerin Added Compound Gauge, Embedded Type (D)

  DAIICHIKEKI

  [Features]
  · Glycerin solution is added for appropriate vibration and pulsation.
  · A reduction in pulsation has dramatically improved durability.
  [Applications]
  · This super vibration-proof type is appropriate for pressure measurements under extreme pulsation.

  Days to Ship:	17 Day(s) or more

• 

  IPT General Pressure Gauge, Rounded Edge Type (B)

  DAIICHIKEKI

  [Features]
  · Type approval has been received based on the new Japanese Measurement Act, which ensures high reliability and a diverse range of applicable fields.
  · The product is easy to handle and has excellent durability.
  [Applications]
  · Comes in a variety of sizes, case configurations and pressure ranges for easy model selection.

  Days to Ship:	10 Day(s) or more

• 

  IPT General Pressure Gauge, Embedded Type (D)

  DAIICHIKEKI

  [Features]
  · Type approval has been received based on the new Japanese Measurement Act, which ensures high reliability and a diverse range of applicable fields.
  · The product is easy to handle and has excellent durability.
  [Applications]
  · Comes in a variety of sizes, case configurations and pressure ranges for easy model selection.

  Days to Ship:	16 Day(s) or more

• 

  IPT General Pressure Gauge, Vibration-Proof Type, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Type approval has been received based on the new Japanese Measurement Act, which ensures high reliability and a diverse range of applicable fields.
  · Used in areas with vibration.
  [Applications]
  · Comes in a variety of sizes, case configurations and pressure ranges for easy model selection.

  Days to Ship:	16 Day(s) or more

• 

  IPT General Pressure Gauge, Vibration-Proof Type, Embedded Type (D)

  DAIICHIKEKI

  [Features]
  · Type approval has been received based on the new Japanese Measurement Act, which ensures high reliability and a diverse range of applicable fields.
  · Used in areas with vibration.
  [Applications]
  · Comes in a variety of sizes, case configurations and pressure ranges for easy model selection.

  Days to Ship:	21 Day(s) or more

• 

  IPT General Pressure Gauge, SUS Type, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Uses stainless steel for wetted parts.
  · The product is easy to handle and has excellent durability.
  [Applications]
  · This product can measure corrosive fluids.

  Days to Ship:	15 Day(s) or more

• 

  IPT General Pressure Gauge, SUS Type, Embedded Type (D, FD)

  DAIICHIKEKI

  [Features]
  · Uses stainless steel for wetted parts.
  · The product is easy to handle and has excellent durability.
  [Applications]
  · This product can measure corrosive fluids.

  Days to Ship:	21 Day(s) or more

• 

  IPT General Pressure Gauge, SUS Type For Vapor, Rimless Type (A)

  DAIICHIKEKI

  [Features]
  · Uses stainless steel for wetted parts.
  · The pressure medium is a product which withstands temporarily high temperatures, such as the water vapor when starting operation.
  [Applications]
  · This product can measure corrosive fluids.

  Days to Ship:	21 Day(s) or more

• 

  IPT General Pressure Gauge, SUS Type For Vapor, Embedded Type (D, FD)

  DAIICHIKEKI

  [Features]
  · Uses stainless steel for wetted parts.
  · The pressure medium is a product which withstands temporarily high temperatures, such as the water vapor when starting operation.
  [Applications]
  · This product can measure corrosive fluids.

  Days to Ship:	21 Day(s) or more

Loading...