Adhesive（Color：Other）

• 

  INSTANT ADHESIVE ULTRA-RAPID

  THREEBOND

  [Features]
  · Offers excellent initial adhesion and realizes ultra-fast curing even with low adhesive materials.
  · Excellent long-term storage stability.
  · Excellent for adhesion of paper, hard-to-adhere plastic, porous wooden materials, etc.
  [Applications]
  · Adhesion of paper, plastic, and wood.

  Days to Ship:	Quote

• 

  Hot Glue, Dedicated Gun

  GOOT

  [Features]
  · Ideal for repairing, adhering, and refilling porous materials such as wood, paper, cloth, and leather.
  · Plastics, metals, ceramics and glass can be temporarily fixed.
  [Applications]
  · Can be used for various applications including interior decoration, display, etc. / packaging such as wrapping and cardboard boxing / bookbinding / repairing and bonding shoes and bags / coating gaps / lead wire bonding for printed circuit boards, bonding electronic components, etc.

  Days to Ship:	16 Day(s) or more

• 

  Liquid Silicone (Adhesive)

  AS ONE

  Liquid silicone.
  [Applications]
  · Single-ingredient oxime silicone adhesive sealing material, reacts with moisture in the air and hardens into an elastic, rubbery state.
  · Adheres to metal, plastic, glass and almost any other material without primer while it cures.
  · This product does not emit acid while curing, so it causes almost no corrosion to non-copper metals.
  · After curing, the rubber has excellent heat resistance, cold resistance, weather resistance, water resistance and electrical properties, etc.
  [Applications]
  · Ideal as an adhesive sealant for electronic communication equipment.
  · Ideal as a sealing material for car parts or gaskets for meters/instruments.

  Days to Ship:	9 Day(s) or more

• 

  Loctite Hot Melt Adhesive Glue Gun

  HENKEL

  [Features]
  · Comes with temperature control function.
  · Due to adopting a special heater, it takes 3 minutes to reach the operating temperature.

  Days to Ship:	Quote

• 

  Sista Single-Liquid Type Simple Urethane Foam (Filling Gun Type) "Sista Pro" - Dedicated Gun - Long Nozzle

  HENKEL

  [Features]
  · Adjustment of discharge quantity is simple.

  Days to Ship:	16 Day(s) or more

• 

  Loctite Ultraviolet Light Curing Adhesive, High Adhesion Type

  HENKEL

  [Features]
  · Cures with UV light.
  · Single solution with no mixing required.
  · For the adhesion of metal and glass parts.
  · Sealing coating.
  [Applications]
  · Reinforces the junctions of flexible wiring with LCD panels and PCBs.
  · Fixing coiled wires.
  · Features excellent moisture resistance and works well with plastics such as glass epoxy.
  · For sealing terminals.

  Days to Ship:	Quote

• 

  Loctite UV / Visible Light Curing Adhesive

  HENKEL

  [Features]
  • Cures with UV rays, visible light and humidity.
  • Single liquid type that does not require mixing.
  ・ Complies with the ISO-10993 Biological Compatibility Testing Program, allowing use in the assembly of medical devices.
  [Application]
  • Extremely rapid adhesion, or for areas requiring curing of protruding parts and surfaces.
  • For adhesion of rubber, metal, and plastic components.

  Days to Ship:	Quote

• 

  Loctite UV (Ultraviolet) Fiber Irradiation Device

  HENKEL

  [Features]
  • A UV fiber device designed to make UV and visible light curing type adhesives cure perfectly.
  • Lamp replacement during maintenance is very easy.
  • Can be used for both the built-in automatic machine type and the manual type.
  ・ Light intensity can be adjusted freely from 0 to 100%.
  • Can be used freely with any type of power source worldwide.
  • Has a program to deal with momentary power failure.
  [Application]
  • For curing UV / VIS (ultraviolet ray / visible light curing) adhesives.

  Days to Ship:	Quote

• 

  Loctite Ultraviolet Light Curing Adhesive, Medium Adhesion Type

  HENKEL

  [Features]
  · Cures with UV light.
  · Single solution with no mixing required.
  · Surface curing time is the representative value with high pressure mercury lamp 100 mW/cm2 at 365 nm irradiation.
  [Applications]
  · Glass, metal, and some thermoplastic substrates.
  · It demonstrates excellent strength retention ratios when exposed to water or humid environments.

  Days to Ship:	Quote

• 

  Epoxy Resin Adhesive, Bond E230G, Extension Tube

  KONISHI

  Extension tube for H293JPM. Adhesive filling of anchors and streaks.

  Days to Ship:	Quote

• 

  Loctite Hand Pump for Anaerobic Adhesives

  HENKEL

  Simple metered dispensing gun for anaerobic adhesive bottles (50 ml, 250 ml).
  [Features]
  ·By applying directly from the bottle, it is possible to apply a fixed amount.
  ·The amount of coating can be adjusted with an adjusting screw.
  ·It can be used for screw loosening adhesives and fitting adhesives with viscosities up to 30,000 mPa s.
  ·It is easy to use because it can be attached directly to the container, making it easy to replace the liquid.
  [Applications]
  ·Used by attaching to the bottle body as a metered applicator when using Loctite anaerobic adhesive.
  ·On the production line for parts, etc.

  Days to Ship:	35 Day(s)

• 

  Loctite Needle for Instant Adhesive

  HENKEL

  Needles that can be used by attaching to various instant adhesive product bottles.
  [Features]
  ·Adhesive can be applied to small areas by attaching to the product bottle.
  ·Various sizes and materials are available, and you can choose according to the type of instant adhesive and the size of the application area.
  ·The needle is designed to be securely fixed to withstand harsh environments.
  [Applications]
  ·General when applying adhesive.
  ·Apply a small amount of instant adhesive.

  Days to Ship:	Quote

• 

  Sista Urethane Foam "Gray Foam"

  HENKEL

  Foam is the same color as mortar and concrete for clean adhesive filling. Offers excellent work efficiency. Does not contain toluene, xylene, ethylbenzene, styrene, or formaldehyde. For mold sealing when injecting mortar based grout.

  Days to Ship:	35 Day(s)

• 

  Epoxy Resin Based Adhesive Bond E230G

  KONISHI

  Epoxy resin adhesive bond for fixing post-installation anchors.
  [Features]
  · Features excellent adhesive power for concrete, mortar, metal, etc. and is the best fixing resin for anchors and joint bars.
  · High strength epoxy resin for civil engineering and construction that can be applied even to wet surfaces.
  · Conforms to NEXO (an epoxy resin standard for post-construction anchor grouting).
  [Applications]
  · For installation of equipment and devices.
  · Adhesive packing for anchors/joint bars.

  Days to Ship:	12 Day(s)

• 

  Semi-Automatic Coating Machine (with Remaining Amount Alarm) Handheld Pneumatic Applicator (with Switch)

  HENKEL

  [Features]
  ·It is lightweight and slim, so you can work with one hand.
  ·Can be used with a simple connection to a semi-automatic coating machine.

  Days to Ship:	Quote

Loading...