MISUMI Locating Pins（Insertion Guide Tolerance：m6）

• • On Sale Till 31/03/2025
  • Recommendation

  

  MiSUMi Economy

  Locating Pins - Straight, Tapered

  MISUMI

  This Straight, Press Fit Type product archives a short lead time and low price by narrowing the size and tolerance for specific applications.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day

• 

  Locating Pins - Small Head, Round Tapered - Press Fit

  MISUMI

  - Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Tapped)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - For tapped type, unless described otherwise on the drawing, the spec. design is the same as for Press Fit Type. For D Tolerance g6, h7, no Insertion guide is provided. (ℓ1)
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Height Adjusting Pins - Counterbored

  MISUMI

  - Height Adjusting Pins – Counterbored from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Tapped

  MISUMI

  - Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished and centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Plastic, Small Diameter

  MISUMI

  - Locating Pins - Plastic, Small Diameter from MISUMI.
  - Having a metal core, it is less prone to be broken when used for side locating.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - Core Rod material of locating pin is made of SUS304.
  - There is a flat part of Ø0.2 or below at the tip of Straight Type, Spherical Type and Small Head Type.
  - MC nylon of flat tip type is not available.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Threaded

  MISUMI

  Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Tapped)

  MISUMI

  - Locating Pins - Straight, Tapered (Tapped) from MISUMI.
  - The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Height Adjusting Pins - Press Fit

  MISUMI

  - Height Adjusting Pins - Press Fit from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
  - A straight positioning pin made of high hardness stainless steel.
  - Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
  - Tapped type locating pin provided tapped thread for disassembled.
  - For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
  - The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Tapped

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)

  MISUMI

  - Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) from MISUMI.
  - Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Press Fit)

  MISUMI

  - Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Air Vent, Threaded

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Tapped)

  MISUMI

  - Locating Pins - Straight, Sphere (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
  - Shouldered with each dimension configurable.
  - Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - SUS304 may not be polished and may have no centering hole.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a female thread.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  [Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

Loading...