MISUMI Locating Pins（Insertion Guide Tolerance：g6）

• • On Sale Till 31/03/2025
  • Recommendation

  

  MiSUMi Economy

  Locating Pins - Straight, Tapered

  MISUMI

  This Straight, Press Fit Type product archives a short lead time and low price by narrowing the size and tolerance for specific applications.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day

• 

  MiSUMi Economy

  Locating Pin - Straight, Configurable[RoHS Comliant]

  MISUMI

  Straight Type Locating Pins with the diameter configurable in 0.01 mm increments. *The minimum order quantity is 30 pcs. Please check with the part number tab or WOS

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Press Fit

  MISUMI

  - Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Air Vent (Tapped)

  MISUMI

  - Locating Pins - Air Vent (Tapped) from MISUMI.
  - Since there is an air groove, it is easy to insert a pin. It is attached with a female thread.
  - The material of pin can be selected 3 types, SUJ2 or SUS304 Equivalent, SUS440C or 13Cr stainless.
  - Mounting method can be selected 2 types, Thread or Tapped.
  - The outer diameter of pin can be selected 5 sizes, 5, 6, 8, 10, and 12 mm.
  - The tolerance of outer diameter is g6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Locating Pins - Plastic, Small Diameter

  MISUMI

  - Locating Pins - Plastic, Small Diameter from MISUMI.
  - Having a metal core, it is less prone to be broken when used for side locating.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - Core Rod material of locating pin is made of SUS304.
  - There is a flat part of Ø0.2 or below at the tip of Straight Type, Spherical Type and Small Head Type.
  - MC nylon of flat tip type is not available.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Tapped

  MISUMI

  - Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished and centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Threaded

  MISUMI

  Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Tapped)

  MISUMI

  - Locating Pins - Straight, Tapered (Tapped) from MISUMI.
  - The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Marker Pins - with Flathead Slot

  MISUMI

  - Marker Pins - with Flathead Slot, JPLB / JPLBK / JPLBM / JPLBS series from MISUMI.
  - Have the Flathead Slot provided and thus, can be mounted easily by using the screwdriver.
  - The material of marker pin can be selected 2 types, Steel S45C Equivalent, Stainless Steel SUS304.
  - SUS304 type marker pins may not be polished and may have no centering hole.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Air Vent (Threaded)

  MISUMI

  [Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Flanged Locating Pins - Flange Mounted

  MISUMI

  Locating Pins having the flange shaped for mount. The flange can be fixed with a screw.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Tapped)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - For tapped type, unless described otherwise on the drawing, the spec. design is the same as for Press Fit Type. For D Tolerance g6, h7, no Insertion guide is provided. (ℓ1)
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Height Adjusting Pins - Press Fit

  MISUMI

  - Height Adjusting Pins - Press Fit from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Height Adjusting Pins - Counterbored

  MISUMI

  - Height Adjusting Pins – Counterbored from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
  - A straight positioning pin made of high hardness stainless steel.
  - Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
  - Tapped type locating pin provided tapped thread for disassembled.
  - For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
  - The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Tapped)

  MISUMI

  - Locating Pins - Straight, Sphere (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Plate Centering Pins

  MISUMI

  - Plate Centering Pins, BCMPA / CMPA / SCMPA series from MISUMI.
  - Suitable for centering thin objects.
  - Can be used for attaching gripper.
  - Center holes may disappear depending on dimension B.
  - The material of pin can be selected 2 types, steel S45C Equivalent or stainless steel SUS304.
  - SUS304 Plate Centering Pins may not be polished and may have no centering hole.
  - When the L dimension of tapped type is less than Mx4, the tapped hole or pilot hole for tapping may go through.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Marker Pins - Hexagon Socket Type

  MISUMI

  - Marker Pins - Hexagon Socket Type from MISUMI.
  - Hex hole enables easy mounting with a hex wrench.
  - The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - The pin with small thread diameter has thin under-head part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)

  MISUMI

  - Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) from MISUMI.
  - Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins for Grippers - Tapped

  MISUMI

  [Features]Positioning pin female thread type used for mounting an opening / closing chuck.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Air Vent, Threaded

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Tapped

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Press Fit)

  MISUMI

  - Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
  - Shouldered with each dimension configurable.
  - Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - SUS304 may not be polished and may have no centering hole.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a female thread.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins for Grippers - Stepped

  MISUMI

  [Features]Positioning pin stepped type used for mounting an opening / closing chuck.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins for Grippers - Counterbored

  MISUMI

  [Features]Positioning pin counterbore type used for mounting an opening / closing chuck.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

Loading...