(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 sampai dengan 20:00 pada tanggal 16/6/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (WIB) 16/6/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
MISUMI Rotary Shafts（Material_02：Steel）
Basic Shape_02
-
Straight -
One End Stepped -
Both Ends Stepped -
Both Ends Double Stepped -
Hollow
-
- Recommendation
MISUMI
Expand L size to up to 1000mm! Furthermore, up to 4 keyways and 3 flats are possible!
[Basic shape] Straight
[Shaft end shape (left)] Female thread
[Shaft end shape (right)] Female thread
[Material] S45C equivalent, SUS304, SCM435< br>[Additional machining available] Keyway, flat chamfer, double chamfer, retaining ring groove, slit cam groove, L dimension tolerance change, female thread depth changeDays to Ship: 4 Day(s) or more -
MISUMI
Expand L size up to 1000mm! Furthermore, up to 4 keyways and 3 flats are possible!
[Basic shape] Straight
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Processing] Retaining ring grooved
[Material] S45C equivalent, SUS304, SCM435 [Additional machining available] Keyway, flat chamfer, 2 chamfers, chamfer depth specification, slit cam groove, L dimension tolerance change, spanner groove, C chamfer width changeDays to Ship: 4 Day(s) or more -
MISUMI
Up to 4 keyways and 3 flats possible! Furthermore, the L dimension has been expanded to a maximum of 1000mm!
[Basic shape] Straight
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Material] S45C equivalent, SUS304, SCM435< br>[Additional machining available] Key groove, flat chamfer, double chamfer, retaining ring groove, slit cam groove, L dimension tolerance change, spanner groove, C chamfer width changeDays to Ship: 4 Day(s) or more -
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Tapped
MISUMI
Expand L dimension up to 1000mm!
>[Basic shape] Straight
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Material] S45C equivalent, SUS304
[Hardness ] Without hardening
[Keyway] With keyway
[Additional machining available] Flat chamfering, double chamfering, retaining ring groove, slit cam groove, L dimension tolerance change, spanner groove, C chamfer width changeDays to Ship: 4 Day(s) or more -
Rotary Shafts - End Shape Selectable
MISUMI
[Features]Shaft end shapes can be freely combined. The basic shape can be selected from straight, 1 step on 1 end, and 1 step on both ends.
Days to Ship: 12 Day(s) or more -
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - Both Ends Stepped
MISUMI
Expand L size to up to 1000mm!
[Basic shape] Straight
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Material] S45C equivalent, SUS304
[Processing] With key groove/retaining ring groove
[Additional machining available] Flat chamfering, double chamfering, chamfer depth specification, slit cam groove, L dimension tolerance change, spanner groove, C chamfer width changeDays to Ship: 4 Day(s) or more -
Driving Shafts - Both Ends Stepped
MISUMI
Expanded to a maximum total length of 1000mm! It is also possible to process key grooves, flattening, and retaining rings on stepped parts with additional machining!
[Basic shape] Single step on both ends
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Material] Equivalent to S45C, SUS304, SCM435
[Additional machining available] Key groove, retaining ring groove, flat surface, slit cam groove, L dimension tolerance change, spanner groove, coaxiality change, C chamfer width change, female thread additionDays to Ship: 4 Day(s) or more -
MISUMI
Expand L size up to 1000mm!
[Basic shape] Straight
[Shaft end shape (left)] Female thread
[Shaft end shape (right)] Female thread
[Processing] With keyway
[Material] S45C Equivalent to SUS304
[Additional machining available] Flat chamfering, double chamfering, retaining ring groove, slit cam groove, L dimension tolerance change, spanner groove, female thread depth changeDays to Ship: 4 Day(s) or more -
Driving Shafts - One End Stepped One End Double Stepped
MISUMI
Expanded to up to 1000mmtotal length!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Both ends stepped
[Shaft end shape (left)] Male thread
[Shaft end shape (right)] Male thread
[Material] S45C equivalent, SUS304, SCM435
[Additional machining available] Keyway, retaining ring groove, flattening, left-handed thread change, fine thread change, relief dimension processing, slit cam groove, L dimension tolerance change, coaxiality changeDays to Ship: 4 Day(s) or more -
MISUMI
[Features]Use it as a rotary shaft for detent of the transport roller.
Days to Ship: 4 Day(s) or more -
Rotary Shafts - One End Stepped
MISUMI
Expanded to up to 1000mmtotal length!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Single step on one end
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Material] Equivalent to S45C, SUS304, SCM435
[Additional machining available] Keyway, retaining ring groove, flat surface, slit cam groove, L dimension tolerance change, spanner groove, coaxiality change, C chamfer width changeDays to Ship: 4 Day(s) or more -
MISUMI
Expand L size to up to 1000mm! Furthermore, up to 4 keyways and 3 flats are possible!
[Basic shape] Straight
[Shaft end shape (left)] Female thread
[Shaft end shape (right)] No processing
[Material] S45C equivalent, SUS304, SCM435< br>[Additional machining available] Key groove, flat chamfer, double chamfer, retaining ring groove, slit cam groove, L dimension tolerance change, slotted groove, C chamfer width change, female thread depth changeDays to Ship: 4 Day(s) or more -
Rotary Shafts - One End Stepped and Threaded
MISUMI
Expanded to up to 1000mmtotal length!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Single step on one end
[Shaft end shape (left)] Male thread
[Shaft end shape (right)] No processing
[Material] S45C equivalent, SUS304, SCM435
[Additional machining available] Keyway, retaining ring groove, flattening, left-handed thread change, fine thread change, slit cam groove, L dimension tolerance change, slotted groove, coaxiality change, C chamfer width change, Relief dimension processingDays to Ship: 4 Day(s) or more -
Rotary Shafts - Both Ends Double Stepped
MISUMI
[Basic shape] Two steps on both ends
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Material] S45C equivalent, SUS304
[Additional processing Compatible with: Keyway, retaining ring groove, flattening, slit cam groove, L dimension tolerance change, spanner grooveDays to Ship: 6 Day(s) -
MISUMI
Expanded to a maximum length of 1000mm!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Both ends stepped
[Shaft end shape (left)] Stepped female thread
[Shaft end shape (right)] Stepped female thread
[Material] S45C Equivalent to SUS304
[Additional machining available] Keyway, retaining ring groove, flat surface, double chamfer, slit cam groove, L dimension tolerance change, coaxiality change, female thread depth changeDays to Ship: 4 Day(s) or more -
Hollow Rotary Shafts - Lightweight, Straight
MISUMI
"This product is hollow and thus, is suitable for weight-saving."
Days to Ship: 12 Day(s) or more -
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - Both Ends Stepped and Tapped
MISUMI
Expand L size to up to 1000mm!
[Basic shape] Straight
[Shaft end shape (left)] Female thread
[Shaft end shape (right)] No processing
[Processing] With key groove
[ Material] S45C equivalent, SUS304 [Additional machining available] Flat chamfer, 2 chamfers, retaining ring groove, slit cam groove, L dimension tolerance change, spanner groove, slot groove, C chamfer change, female thread depth changeDays to Ship: 4 Day(s) or more -
Rotary Shafts-One End Stepped and Tapped
MISUMI
Expanded to a maximum length of 1000mm!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Single step on one end
[Shaft end shape (left)] Stepped female thread
[Shaft end shape (right)] No processing
[Material] Equivalent to S45C, SUS304
[Additional machining available] Keyway, retaining ring groove, flat surface, slit cam groove, L dimension tolerance change, slotted groove, concentricity change, C chamfer width change, female thread depth changeDays to Ship: 4 Day(s) or more -
Rotary Shafts - One End Stepped with Retaining Ring Groove
MISUMI
[Basic shape] One step on one end
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Processing] Step part with retaining ring groove
[Material] S45C equivalent, SUS304
[Additional machining available] Keyway, retaining ring groove, flattening, slit cam groove, L dimension tolerance changeDays to Ship: 4 Day(s) -
Rotary Shafts - Both Ends Stepped with Retaining Ring Grooves
MISUMI
[Basic shape] Stepped on both ends
[Shaft end shape (left)] No processing
[Shaft end shape (right)] No processing
[Processing] Stepped retaining ring groove
[Material] ]S45C equivalent, SUS304
[Additional machining available] Keyway, retaining ring groove, flattening, slit cam groove, L dimension tolerance changeDays to Ship: 4 Day(s) -
Rotary Shafts-One End Threaded/Standard Type/Wrench Flats Type
MISUMI
Expanded to up to 1000mmtotal length!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Both ends stepped
[Shaft end shape (left)] No processing
[Shaft end shape (right)] Male thread
[Material] S45C equivalent, SUS304
br>[Additional machining available] Keyway, retaining ring groove, flattening, left-hand thread change, fine thread change, relief dimension processing, slit cam groove, L dimension tolerance change, spanner groove, coaxiality changeDays to Ship: 4 Day(s) -
Driving Shafts - One End Stepped
MISUMI
Expanded to a maximum length of 1000mm!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Single step on one end
[Shaft end shape (left)] Stepped female thread
[Shaft end shape (right)] Female thread
[Material] S45C equivalent, SUS304
[Additional machining available] Keyway, retaining ring groove, flattening, slit cam groove, L dimension tolerance change, coaxiality change, female thread depth changeDays to Ship: 4 Day(s) or more -
Rotary Shafts-One End Threaded/One End Tapped
MISUMI
Expanded to a maximum total length of 1000mm! It is also possible to add key grooves, flats, and retaining rings to the stepped part with additional machining!
[Basic shape] Single step on both ends
[Shaft end shape (left)] Female thread
[Shaft end shape (right)] Male thread
[Material] Equivalent to S45C
[ Hardness] No quenching
[Additional machining available] Keyway, retaining ring groove, flattening, male thread, relief dimension, slit cam groove, L dimension tolerance change, spanner groove, coaxiality change
[D Tolerance] g6 (polishing rod)Days to Ship: 4 Day(s) -
MISUMI
• Two retaining rings are included.
• Suitable for where tension needs to be applied, such as belt conveyors.Days to Ship: 18 Day(s) or more -
Days to Ship: 18 Day(s) or more -
Rotary Shafts-One End Stepped, One End Tapped
MISUMI
Expanded to a maximum length of 1000mm!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Single step on one end
[Shaft end shape (left)] No processing
[Shaft end shape (right)] Female thread
[Material] S45C equivalent, SUS304, SCM435
[Additional machining available] Keyway, retaining ring groove, flat surface, slit cam groove, L dimension tolerance change, coaxiality change, C chamfer width change, female thread depth changeDays to Ship: 4 Day(s) or more -
Rotary Shafts-One End Stepped and Threaded, One End Tapped
MISUMI
Expanded to a maximum length of 1000mm!
It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
[Basic shape] Single step on one end
[Shaft end shape (left)] Male thread
[Shaft end shape (right)] Female thread
[Material] S45C equivalent, SUS304
> [Additional machining available] Keyway, retaining ring groove, flattening, left-hand thread change, fine thread change, slit cam groove, L dimension tolerance change, coaxiality change, relief dimension machining, female thread depth changeDays to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shaft Dia. D(mm) |
| End Shape (Left) |
| Basic Shape_02 |
| End Shape (Right) |
| Material_02 |
| Hardness |
| Keyway |
| Surface Treatment_02 |
| D Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Tapped | Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - Both Ends Stepped | Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - Both Ends Stepped and Tapped | Rotary Shafts - Both Ends Stepped with Retaining Ring Grooves | Rotary Shafts-One End Threaded/Standard Type/Wrench Flats Type | ||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) | 4 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) | 4 Day(s) | 4 Day(s) | 4 Day(s) or more | 4 Day(s) | 18 Day(s) or more | 18 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Shaft Dia. D(mm) | 4 ～ 50 | 2 ～ 50 | 2 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 30 | 6 ～ 50 | 4 ～ 50 | 6 ～ 50 | 6 ～ 30 | 6 ～ 50 | 10 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 8 ～ 15 | 6 ～ 35 | 6 ～ 50 | 6 ～ 50 |
| End Shape (Left) | Tapped | Retaining Ring Grooves on Both Ends | No Machining | No Machining | No Machining / Tapped / Threaded / Retaining Ring Grooves on Both Ends / Hex Socket | Retaining Ring Grooves on Both Ends | No Machining | Tapped | Threaded | D-Cut | No Machining | Tapped | Threaded | No Machining | Tapped | No Machining | No Machining | Tapped | Retaining Ring Grooves on Both Ends | Retaining Ring Grooves on Both Ends | No Machining | Tapped | Tapped | Shafts for Tension | Shafts for Tension | No Machining | Threaded |
| Basic Shape_02 | Straight | Straight | Straight | Straight | Straight / One End Stepped / Both Ends Stepped | Straight | Both Ends Stepped | Straight | Both Ends Stepped | Straight | One End Stepped | Straight | One End Stepped | Both Ends Double Stepped | Both Ends Stepped | Hollow | Straight | One End Stepped | One End Stepped | Both Ends Stepped | Both Ends Stepped | One End Stepped | Both Ends Stepped | Straight | Straight | One End Stepped | One End Stepped |
| End Shape (Right) | Tapped | Retaining Ring Grooves on Both Ends | Straight | Straight | Straight / Tapped / Threaded / Retaining Ring Grooves on Both Ends / Hex Socket | Retaining Ring Grooves on Both Ends | Straight | Tapped | Threaded | D-Cut | Straight | Straight | Straight | Straight | Tapped | Straight | Straight | Straight | Straight | Retaining Ring Grooves on Both Ends | Threaded | Tapped | Threaded | Shafts for Tension | Shafts for Tension | Tapped | Tapped |
| Material_02 | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Hardness | Unhardened / Hardened | Unhardened / Hardened | Unhardened / Hardened | Unhardened | Unhardened | Unhardened | Unhardened / Hardened | Unhardened | Unhardened / Hardened | Unhardened | Unhardened / Hardened | Unhardened / Hardened | Unhardened / Hardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened | Unhardened / Hardened | Unhardened |
| Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | W/o Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | W/o Keyway | W/o Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) |
| Surface Treatment_02 | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment | Surface Treatment |
| D Tolerance | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) |
Loading...
Configure
Specification/Dimensions
-
Shaft Dia. D(mm)
-
End Shape (Left)
-
No Machining -
Tapped -
Threaded -
Retaining Ring Grooves on Both Ends -
D-Cut -
Shafts for Tension -
Hex Socket
-
-
End Shape (Right)
-
Straight -
Tapped -
Threaded -
Retaining Ring Grooves on Both Ends -
D-Cut -
Shafts for Tension -
Hex Socket
-
-
Material_02
- Steel
- Stainless Steel
-
Hardness
- Unhardened
- Hardened
-
Keyway
- W/o Keyway
- With Keyway
- Keyway Option (Alteration)
-
Surface Treatment_02
- No Surface Treatment
- Surface Treatment
-
D Tolerance
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 6 Day(s) or Less
- 12 Day(s) or Less
- 17 Day(s) or Less
- 18 Day(s) or Less
Related Categories to Rotary Shafts
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy