NITTA One-Touch Fitting

• 

  Push One E Series Connector

  NITTA

  [Features]
  ・ The tube is a push-one connection
  ・ No jigs or tools are required to connect the tubes
  ・ Electroless nickel plating treatment is applied
  ・ There is little deterioration of the surface and elution of copper ions into the fluid is prevented
  ・ Uses flame-retardant resin (equivalent to UL94 standard V-0)
  ・ Uses flame-retardant PBT resin as material
  ・ Equivalent to UL94 V-0 and has excellent self-extinguishing property
  ・ It can be used even in an environment where spatter is scattered
  ・ Sealing on tapered male thread
  ・ No need to wrap sealing tape

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Push One E Series 90° Elbow

  NITTA

  [Features]
  ・ The tube is a push-one connection
  ・ No jigs or tools are required to connect the tubes
  ・ Electroless nickel plating treatment is applied
  ・ There is little deterioration of the surface and elution of copper ions into the fluid is prevented
  ・ Uses flame-retardant resin (equivalent to UL94 standard V-0)
  ・ Uses flame-retardant PBT resin as material
  ・ Equivalent to UL94 V-0 and has excellent self-extinguishing property
  ・ It can be used even in an environment where spatter is scattered
  ・ Sealing on tapered male thread
  ・ No need to wrap sealing tape

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Push One E Series Adapter Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this adapter elbow. The surface is resistant to degradation, preventing elution of copper ions.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Push One E-Series Female Connector

  NITTA

  No jigs or tools are required for connecting tubes to this female connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Push One A Series Union Connector

  NITTA

  No jigs or tools are required for connecting tubes to this union connector. The surface is resistant to degradation, preventing elution of copper ions.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Push One A Series Union Tee

  NITTA

  No jigs or tools are required for connecting tubes to this union tee. The surface is resistant to degradation, preventing elution of copper ions.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PushOne E Series, 90° Panel Tough Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this 90° panel touch elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in the environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Push One E Series Nipple

  NITTA

  No jigs or tools are required for connecting tubes to this nipple. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	78 Day(s) or more

• 

  Push One E Series Panel Touch Connector

  NITTA

  No jigs or tools are required for connecting tubes to this panel touch connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Noncombustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, and has superior self-extinguishing properties.
  · Can be used in environments where sputtering occurs.
  · There is no need to wrap the R threads with seal processing tape

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Push One E Series, Brass Body Type, 90° Elbow

  NITTA

  No jigs or tools are required. Combine with a UE tube for conductivity. Supports UL94 standard V-0 equivalent for self-extinguishing. For use in environments with spatters.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Chemifit C1S Series, 90° Elbow EL-C1S

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ The thread section is made of SUS304. Excellent in screw strength
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Chemifit C1S Series, Connector EC-C1S

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ The thread section is made of SUS304. Excellent in screw strength
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Chemifit C1S Series - Female Connector EFC-C1S

  NITTA

  The EFC-C1S female connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Chemifit C1 Series, 90° Elbow EL-C1

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions
  ・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin
  ・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Chemifit C1 Series 90° Union Elbow EUL-C1

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions
  ・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin
  ・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Chemifit C1 Series Union Tee, EUT-C1

  NITTA

  The EUT-C1 union tee is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Chemifit C1 Series Service Tee EST-C1

  NITTA

  [Features]
  ・ Completely oil-free processed product.
  ・ Parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  ・ It uses the PushOne mechanism for tube connection.
  ・ No need of fixtures or tools to connect a tube.
  ・ The wetted parts are non-metallic.
  ・ Since fluids do not contact metal, there is no elution of metal ions.
  ・ It does not generate dust and has excellent non-contaminating properties.
  ・ Special polypropylene resin is used as a material.
  ・ Excellent inner surface smoothness.
  ・ It is an injection molded product and has the smooth inner surface.
  ・ Double clean packaging.
  ・ It is packed one by one in a cleanroom and then packed in a zipper seal bag.
  ・ The main body and thread section rotate.
  ・ The orientation of the elbow, tee, etc., can be decided when connecting the tubes.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Chemifit C1 Series, Y Union EYB-C1

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions
  ・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin
  ・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Chemifit C1 Series, Connector EC-C1

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions
  ・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin
  ・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Chemifit C1 Series Through Connector ETC-C1

  NITTA

  [Features]
  · Completely oil-free processed product. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.
  · The tube is connected by Push One®. No need for jigs or tools to connect the tube.
  · The liquid contact part is not metal. Fluids do not make contact with any metal, so metal ions are not released.
  · Excellent non-dust and non-polluting properties. A special polypropylene resin is used as a base material.
  •  Superior smoothness of inner surface. Injection-molded for a smooth interior.
  · Double clean packaging. Each fitting is packed in a clean room and put in a zipper-sealed bag.
  ▪ The main body and the threaded part rotate. The body can rotate freely even during piping of elbow and tee.
  ▪ Compliant with the MHLW Ministerial Notification No. 201 (2006), MHW Ministerial Notification No. 370 (1959), Japan.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Speed Controller Bracket BRK

  NITTA

  [Features]
  ・ Completely oil-free processed product.
  ・ Parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  ・ It uses the PushOne mechanism for tube connection.
  ・ No need of fixtures or tools to connect a tube.
  ・ The wetted parts are non-metallic.
  ・ Since fluids do not contact metal, there is no elution of metal ions.
  ・ It does not generate dust and has excellent non-contaminating properties.
  ・ Special polypropylene resin is used as a material.
  ・ Excellent inner surface smoothness.
  ・ It is an injection molded product and has the smooth inner surface.
  ・ Double clean packaging.
  ・ It is packed one by one in a cleanroom and then packed in a zipper seal bag.
  ・ The main body and thread section rotate.
  ・ The orientation of the elbow, tee, etc., can be decided when connecting the tubes.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Chemifit C1 Series, Panel Touch Connector EPC-C1

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions
  ・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin
  ・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Chemifit C1 Series, Blank Plug BC-C1【5 Pieces Per Package】

  NITTA

  Blank Plug BC-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Chemifit C1 Series, Union Connector EUC-C1

  NITTA

  [Features]
  ・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
  ・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
  ・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions
  ・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin
  ・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.
  ・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
  ・ The body and adapter rotate. Elbows and tees can be oriented when piping
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Chemifit C1 Series, Reducer ER-C1

  NITTA

  Reducer ER-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Sputtering Cap CP【10 Pieces Per Package】

  NITTA

  [Features]
  · Protects one-push connection parts from sputter, etc.
  · CCP can be installed after the tubing connection

  Days to Ship:	18 Day(s) or more

• 

  Sputtering Cap CPFW【10 Pieces Per Package】

  NITTA

  With sputter cap CPFW protects PushOne connection part from sputtering.

  Days to Ship:	16 Day(s) or more

• 

  Tube Removal Fixture (Off Tool) EOT

  NITTA

  Tube Removal Fixture (off tool) EOT assists removal of tube of PushOne fitting.

  Days to Ship:	10 Day(s) or more

• 

  Connector With Built-in Valve Function, ECV【10 Pieces Per Package】

  NITTA

  [Features]
  · Remove the tube to open and close the valve inside the fitting. When the tube is detached, the valve shuts automatically.
  · The tube is connected using Push One®. No need for jigs or tools to connect the tube.
  · Electroless nickel plated. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  · There is no need to seal the R-thread part with sealing tape.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Push One A-Series Connector

  NITTA

  No jigs or tools are required for connecting tubes to this connector. Degradation of the surface is minimal and elution of copper ions into the liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PushOne A Series Hexagonal Socket Head Round Connector

  NITTA

  No jigs or tools are required for connecting tubes to this hexagonal socket head connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Push One A Series Female Connector

  NITTA

  No jigs or tools are required for connecting tubes to this female connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PushOne A Series 90° Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this 90° elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Push One A Series 90° Female Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this 90° female elbow. The surface is resistant to degradation, preventing elution of copper ions.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  PushOne A Series, Universal Elbow

  NITTA

  [Features]
  ・ It uses the PushOne mechanism for tube connection.
  ・ No need of fixtures or tools to connect a tube.
  ・ It is electroless nickel plated.
  ・ Degradation of the surface is minimal. The elution of copper ions into the fluids is also prevented.
  ・ The white body brightens the working environment.
  ・ Flame retardant PBT resin is used as the material. Equivalent to UL94 standard V-0 and has excellent self-extinguishing property. It can be used in an environment with spatters.
  ・ Sealed on the R thread.
  ・ No need to wrap sealing tape.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PushOne A Series, 90° Branch Elbow

  NITTA

  [Features]
  ・ It uses the PushOne mechanism for tube connection.
  ・ No need of fixtures or tools to connect a tube.
  ・ It is electroless nickel plated.
  ・ Degradation of the surface is minimal. The elution of copper ions into the fluids is also prevented.
  ・ The white body brightens the working environment.
  ・ Flame retardant PBT resin is used as the material. Equivalent to UL94 standard V-0 and has excellent self-extinguishing property. It can be used in an environment with spatters.
  ・ Sealed on the R thread.
  ・ No need to wrap sealing tape.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PushOne A Series, Triple Universal Elbow

  NITTA

  [Features]
  ・ It uses the PushOne mechanism for tube connection.
  ・ No need of fixtures or tools to connect a tube.
  ・ It is electroless nickel plated.
  ・ Degradation of the surface is minimal. The elution of copper ions into the fluids is also prevented.
  ・ The white body brightens the working environment.
  ・ Flame retardant PBT resin is used as the material. Equivalent to UL94 standard V-0 and has excellent self-extinguishing property. It can be used in an environment with spatters.
  ・ Sealed on the R thread.
  ・ No need to wrap sealing tape.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Push One A Series 90° Union Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this 90° union elbow. The surface is resistant to degradation, preventing elution of copper ions.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PushOne A Series, Y Union

  NITTA

  No jigs or tools are required for connecting tubes to this Y union. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs or tools to connect the tube.
  · Electroless nickel plating.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · The white body contributes to workplace environment aesthetics.
  · Noncombustible PBT resin is used for the base material.
  · Compliant with the UL94 V-0 standard and has superior self-extinguishing properties.
  · Can be used in environments where sputtering is an issue.
  · R screws are sealed, and thus there is no need to wrap them with sealing tape

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  PushOne A Series, Double Y Union

  NITTA

  No jigs or tools are required for connecting tubes to this double Y-union unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · The white body brightens the working environment.
  · Noncombustible PBT resin is used for the materials.
  ·Has superior self-extinguishing properties equivalent to UL94 V-0 standard.
  · Suitable for use in an environment where sputtering occurs.
  · The R screws are sealed, and so rapping with sealing tape is not required.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  PushOne A Series Panel Touch Connector

  NITTA

  No jigs or tools are required for connecting tubes to this panel touch connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Push One A Series Female Panel Touch Connector

  NITTA

  No jigs or tools are required for connecting tubes to this female panel touch connector. The surface is resistant to degradation, preventing elution of copper ions.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PushOne E Series 45 Degree Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this 45° elbow unit. The surface is resistant to degradation, preventing elution of copper ions.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  PushOne E Series 90 Female Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this 90° female elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  E Series Push One 90° Union Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this 90° union elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

Loading...