(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
OSG Ball End Mills (Carbide)（R Precision：-0.01～+0.01）
| Days to Ship |
|
|---|
-
Ball End Type, 2-Flute FX-MG-EBD
OSG
Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute for Graphite DG-EBD
OSG
End mill with diamond coating dedicated for graphite.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Days to Ship: 2 Day(s) -
Ball End Type, 2-Flute CRN-EBD-3
OSG
A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
Coated for steel
Standard/Alteration category: Manufacturer's standard product
Number of flutes (pcs.) 2
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
R Accuracy (µm) ±10Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD
·Demonstrates high performance in machining high-rigid materials and cast iron
·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute DLC-EBD
OSG
Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute GX-EBD-SF
OSG
Carbide mushroom type ball end mill developed for shrink fitting.
Days to Ship: 12 Day(s) or more -
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
Days to Ship: 2 Day(s) or more -
Ball End Type, 2-Flute WXS-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.
Days to Ship: 2 Day(s) -
Ball End Type, 2-Flute CRN-HS-EBD
OSG
Achieving high-speed and high-precision machining by combining shrink and HSK
Work Material: Aluminum/Copper/Resin
For coating non-ferrous metals (CrN)
Standard/Alteration category: Manufacturer's standard product
Number of flutes (pcs.) 2
Helix angle: Standard helix (30 to 44°), R accuracy (µm) ±10Days to Ship: 16 Day(s) or more -
Days to Ship: 2 Day(s) or more -
Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD
OSG
Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-EBD
OSG
Ball end mill that enables dry cutting of copper and copper alloy thanks to the CrN coating and sharp blade shape.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute FXS-HO-EBDS
OSG
Ball end mill for high-hardness steel with an oil hole that has achieved superb tool rigidity.
Days to Ship: 16 Day(s) or more -
Ball End Type, 3-Flute PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Days to Ship: 16 Day(s) or more -
OSG
Ball end mill with spherical cutting edge developed for shrink fitting.
Days to Ship: 16 Day(s) or more -
Ball-End Type, 2-Flute For finishing FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
Days to Ship: 16 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD | Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-EBD | |||||||||||||||||
| Days to Ship | 16 Day(s) or more | 16 Day(s) or more | 2 Day(s) | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 2 Day(s) or more | 2 Day(s) | 16 Day(s) or more | 2 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more |
| R Size(mm) | 0.5 ～ 15 | 2 ～ 6 | 3 ～ 6 | 0.1 ～ 1.5 | 0.2 ～ 1.5 | 3 ～ 6 | 0.5 ～ 10 | 5 ～ 10 | 0.6 ～ 0.7 | 8 | 0.5 ～ 6 | 0.5 ～ 15 | 0.5 ～ 10 | 0.1 ～ 6 | 3 ～ 10 | 3 ～ 10 | 0.5 ～ 10 | 8 ～ 10 | 0.5 ～ 6 |
| Blade length (ℓ)(mm) | 2.5 ～ 55 | 8 ～ 60 | 12 ～ 22 | 0.4 ～ 8 | 0.8 ～ 8 | 4 ～ 7 | 2.5 ～ 38 | 10 ～ 20 | 3 ～ 3.5 | 24 | 1 ～ 12 | 2.5 ～ 55 | 2.5 ～ 38 | 0.4 ～ 22 | 12 ～ 38 | 6 ～ 20 | 1.5 ～ 30 | 12 ～ 15 | 1 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | 20 | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 30 |
| Shank diameter (d)(mm) | 4 ～ 25 | 4 ～ 12 | 5 ～ 11 | 3 | 3 | 6 ～ 12 | 4 ～ 20 | 6 ～ 12 | 4 | 16 | 6 ～ 12 | 3 ～ 25 | 4 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 10 ～ 12 | 6 ～ 12 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 180 | 80 ～ 200 | 120 ～ 160 | 40 | 40 | 90 ～ 110 | 50 ～ 160 | 32 ～ 58 | 50 | 140 | 50 ～ 80 | 70 ～ 280 | 60 ～ 180 | 60 ～ 140 | 90 ～ 160 | 90 ～ 160 | 60 ～ 200 | 49 ～ 58 | 50 ～ 80 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○] | Aluminum[◎] / Copper[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| R Precision(μm) | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | TiAlN | DG | TiAlN | CrN | TiAlN | Non-Coated | DLC | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | CrN | TiAlN | Non-Coated | CrN | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Spherical Ball | Ball |
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- 0.075
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.275
- 0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- 0.55
- 0.6
- R0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.95
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.35
- 0.38
- 0.4
- 0.45
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.7
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.26
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.5
- 9
- 9.5
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12～12.5
- 12
- 12.5
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
30～30.5
- 30
- 30.5
-
31
-
32
-
34
-
35
-
36
-
38
-
40
-
41.5
-
45
-
48
-
50
-
55
-
58
-
60
-
65
-
66
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- OSG (19)
- NACHI(FUJIKOSHI) (1)
- Poulten&Graf (0)
- VAN HOORN (0)
- SANDVIK (0)
- DIJET (0)
- CREATE TOOL (0)
- MITSUBISHI MATERIALS (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- THE CUT (0)
- KYOCERA (0)
- MITSUBISHI HITACHI TOOL (0)
- UNION TOOL (0)
- ATOM (0)
- OKAZAKI SEIKO (0)
- MAPAL (0)
- KYOWA SEIKO (0)
- GUHRING (0)
- EIKOSHA (0)
- WIDIN (0)
- NS TOOL (0)
- ASAHI TOOLS (0)
- SANKO MFG (0)
- 7 LEADERS (0)
CAD
-
- 2D
- 3D
Related Categories to Ball End Mills (Carbide)
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy