VENN Safety Valves, Control Valves（Max. Applicable Pressure：0.11 to 1）

• 

  RP-6 Type Pressure Reducing Valve (for Steam) Benten

  VENN

  Pilot operated general-purpose products (high-capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  · The VENN-TEN is a pilot-operated pressure reducing valve used in main pipes and large flow-rate lines of construction equipment, industrial steam circuits, various production equipment, system industries, etc.
  ・­ This pressure-reducing valve is designed with operability as the number 1 priority in this design. It has stable performance under various conditions, and it is easy to install and use because it is small and light.
  · The adoption of the piston guide structure and special seal ring make control stable.
  · Can be used for a wide range of pressures and flow rates.
  ▪ As for RP-6 type, it is easy to adjust the pressure by manual handle operation with automatic lock mechanism (nominal diameter 15 to 80).
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RD-14 Model Series - Pressure Reducing Valve (for Cold Water/Warm Water/Air/Oil)

  VENN

  Direct acting pressure reducing valve for air, liquids, and water has a low pressure fluctuating range and can be used at low as well as high flow rates.
  
  [Features]
  · At the construction facilities, the product can be used to control the pressure of water supplied from elevated water tanks in mid-rise and high-rise buildings, or in water supply directly connected to pumps instead of elevated water tanks, as well as in boiler water supply. Industrial use of the product includes pressure control for fuel oil, lubricating oil, and air.
  · Has a pressure balance structure, so changes to set pressures are minimal.
  · Maintenance is easy as the upper side can be taken apart unidirectionally allowing for internal inspection.
  · RD-14CN models come with nylon coating to protect from red water.

  Days to Ship:	12 Day(s) or more

• 

  LP-8AN Level-Regulating Valve (for Water, Angled)

  VENN

  [Features]
  · Angle level-regulating valve which prevents red water by using bronze for the main body. The general flow rate adjustment mechanism makes it possible to adjust the water expulsion volume using an adjustment screw and the valve closing time using a needle valve.
  ·When used in cold weather, residual water is minimized during drainage, and water is supplied steadily during rewatering.
  · The body is made of bronze, so it does not rust.
  · Two model series, one general-purpose with an adjustment mechanism and one for cold climates, are offered, so the user can choose a model according to the target application.
  · Antifreezing FV jacket is provided (except for the LP-8ARN model).

  Days to Ship:	12 Day(s) or more

• 

  RP-6A, Pressure-Reducing Valve (for Air/Gas), Benten

  VENN

  Pilot style general-purpose products (high-capacity) for factory facilities and by various types of equipment
  
  [Features]
  · A pilot-operated pressure reducing valve for air and gases which serves as a supporting model to the BENTEN RP-6.
  · The adoption of the piston guide structure makes control stable.
  · Can be used for a wide range of pressures and flow rates.
  · Manual handle control with auto locking mechanism (nominal diameter 15 to 80) makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Steam, Gas and Liquid, RD-3H Series

  VENN

  [Features]
  · Pilot type direct-acting, pressure-reducing valve that is used in non-controllable, small flow-rate locations. It has good pressure-control with excellent wide pressure range adjustment characteristics. The main parts are made from SUS (for steam).
  · Note: These valves differ for use with stream, air, vapor, and liquid.

  Days to Ship:	12 Day(s) or more

• 

  VD-1H Type Vacuum Adjustment Valve

  VENN

  [Features]
  ▪ It prevents the suction of the air in a valve when it opens due to the decrease in set pressure and it also prevents the creation of vacuums in pipes and equipment.
  ▪ Using a silencer when the vapor pipe is attached prevents suction of water into the pipe when vapor stops generating.

  Days to Ship:	22 Day(s) or more

• 

  AF-4 Series Air Vent Valve

  VENN

  The equipment is used in building facilities and factory facilities, etc. It is an air vent valve for fluids. It automatically discharges the air that accumulates in the pipes and the air inside an airtight tank and makes the fluid flow smoothly.
  
  [Features]
  ▪ Due to the improved airtightness, it has adopted the swing valve body.
  ▪ The amount of air discharged from the equipment is comparatively large.
  ▪ It has a simple structure that allows easy handling.
  · AF-4CN is a rust-resistant nylon-coated product.

  Days to Ship:	12 Day(s) or more

• 

  RP-6P Type Pressure-Reducing Valve (for Steam), Benten

  VENN

  Pilot-operated general-purpose products (high-capacity) for construction equipment, factory equipment, etc.
  
  [Features]
  - The VENN-TEN is a pilot-operated pressure reducing valve used in main pipes and large flow-rate lines within construction equipment, industrial steam circuits, production equipment, system industries, etc.
  ­ Designed with operation as its highest priority, it has stable performance under many conditions, and its small size and light weight makes it easy to install and use.
  - Piston guide structure and special seal ring for stable control.
  - The RP-6 type is widely used in pressure range/flow rate applications. Its auto locking mechanism (nominal diameter from 15 to 80) makes pressure adjustment easy with manual handle control.
  - Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RP-6BD Trap, Built-in Pressure Reducing Valve (for Vapor), VENN-TEN

  VENN

  Pilot operated general-purpose products (high-capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  · Pilot-operated pressure reducing valve with built-in steam trap on the inside of the pilot-operated pressure reduction valve; a sister model of Benten RP-6 type.
  · Optimal as a pressure reducing valve positioned in locations where drainage water accumulates easily such as down pipes, and locations at which flow-out of drainage water beyond the pressure reducing valve needs to be prevented.
  · The position of the drain discharge holes can be changed at 90 degree intervals, enabling piping according to installation location.
  · Adoption of piston guide structure and special seal ring makes control stable.
  · Can be used for a wide range of pressures and flow rates.
  · Manual handle control with auto locking mechanism makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  LP-8HN Level-Regulating Valve (for Water, for General Use with Adjustment Mechanisms)

  VENN

  [Features]
  · Standard constant water level valve with adjusting mechanism.
  · In order to prevent rust, threading can be bronze and embedded in the pipe end core.
  · A flow-rate adjustment mechanism and a valve closing time adjustment needle are provided.
  · Solution for rusty water: Screw-in = Bronze body + Pipe end core assembly is possible.
  · Because a bypass flow path is used for the passage to the pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.
  · Antifreeze FV jacket is provided.

  Days to Ship:	12 Day(s) or more

• 

  RD-44N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

  VENN

  Direct acting type general purpose product (low-noise type and pipe-end core support) suitable for housing complexes, hotels, and offices. RD-44N type valves are equipped with only the pressure reducing function, which is fundamental for the water supply pressure composite valve series, and enables increase in construction and test efficiency.
  
  [Features]
  · Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Installation of valve in each room unit eliminates water supply variation due to level differences. 3) No water splashes due to application of appropriate pressure. Reduces water hammering. 4) During maintenance, impact of water outage does not affect other areas. 5. Stable mixing temperature resulting in improved habitability.
  · Uses chlorine water-resistant EPDM.
  · Sanitary design avoids pooling of liquids.
  · Works reliably from low differential pressures to high differential pressure.
  · Safe and secure construction is made possible due to intact pressure-reducing valves.
  · You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.
  · Easy, simple new test gag method.

  Days to Ship:	12 Day(s) or more

• 

  RD-25SN, 50SN Series Pressure-Reducing Valve for Water Service

  VENN

  A pressure reducing valve for supplying water to small boilers and electric water heaters. Can be freely mounted horizontally or vertically.
  
  [Features]
  - Chlorine water-resistant EPDM for improved durability (RD-50SN series).
  - Low-noise type (RD-50SN series).
  - Mounting position can be changed to any orientation (except with strainer cap upwards).

  Days to Ship:	12 Day(s) or more

• 

  SL-35N/35HN Type, Relief Valve for Hot Water Equipment

  VENN

  Diaphragm type relief valve for small hot water boilers and electric water heaters. Used as a relief valve for pressure caused by thermal expansion and on the secondary side of pressure reducing valve.

  Days to Ship:	13 Day(s) or more

• 

  MD-14 Type Series, Primary Pressure Regulating Valve (for Liquid/Air)

  VENN

  Pump relief, pressure tanks, piping etc.
  
  [Features]
  · Used as a pump relief valve.
  • Structure that takes Hunting vibration, etc. into account and provides stable operation.
  • Can be used as a relief valve for pressure tanks, piping etc.
  • Uses a piston type balance structure so changes in outlet pressure due to backpressure fluctuations are small.
  • Unidirectional disassembly the top facilitates internal inspection, simplifying maintenance.
  • MD-14CN features a rust-resistant nylon-coating.

  Days to Ship:	12 Day(s) or more

• 

  LP-8RN, Level-Regulating Valve (for Water, for Cold Areas)

  VENN

  By using a bypass flow path for the path to pilot piping, intermittent water supply effects due to surges are eliminated, providing a silent and steady water supply.
  
  [Features]
  · Constant water level valve for cold climates equipped with a drainage mechanism and a flow rate adjustment mechanism.
  · To prevent rusty water, the screw model can incorporate a pipe end core built into a bronze body.
  · Level-regulating valve suitable for use in cold regions.
  · Includes water drain mechanism and flow rate adjustment mechanism.
  · Rusty water countermeasures: a bypass flow path is used for the passage to pilot piping where the screw type can = body made of bronze + built-in pipe end core, enabling a quiet and steady water supply with no ball tap intermittent water supply effects due to surges

  Days to Ship:	12 Day(s) or more

• 

  TD-2 Type Series, Temperature Control Valve

  VENN

  Heating, cooling, and low temperature models are available.
  
  [Features]
  · General purpose flange type temperature adjustment valve, available for heating applications such as hot water tanks, heat exchangers, and heavy oil heaters, for cooling applications using water or a refrigerant, and low temperature applications where the set temperature is below the ambient temperature or where the set temperature is 40°C or below.

  Days to Ship:	12 Day(s) or more

• 

  AF-6N Air Vent Valve

  VENN

  [Features]
  · Small air vent valve to be used in a pipe, hot water boiler, fan coil, small or medium pressure tank, solar system, or others.
  · Operations are stable due to the BBC (bubble dispersion) method, so water discharge does not occur.
  · The air exhaust is tube-shaped.
  · Compact and capable of up to 1.0MPa.
  · Equipped with manual shut-down mechanism.

  Days to Ship:	16 Day(s) or more

• 

  RP-8 Type Pressure-Reducing Valve (for Steam), Benten

  VENN

  Pilot-operated general-purpose products (high-capacity) for food processing equipment, factory equipment, and disinfection/sterilization equipment.
  
  [Features]
  - Made of stainless steel, ideal for the steam lines of food, disinfection and sterilization equipment.
  - Useful for a wide range of purposes thanks to its non-corrosive, durable stainless steel structure.
  - Piston guide structure and special seal ring for stable control.
  - Can be used over a wide range of pressures and flow rates.
  - Manual handle control with auto locking mechanism makes pressure adjustment easy.
  - Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RD-40, 41 Type Pressure-Reducing Valve (for Steam) Mini-Benten

  VENN

  For use in food machinery, medical equipment, laundry equipment, and other steam-based machinery
  
  [Features]
  - A direct-acting, pressure-reducing valve that is ideal for precise control of steam pressure for various equipment.
  - Compact and lightweight; optimum for integration into devices.
  - Optimal for items that need to be free of rust, such as food, kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).
  - Stainless steel body suitable for higher-grade vapor lines.
  - Provides large flow rates (heat) required when starting up equipment.
  - Main body is made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.
  - Secondary side pressure can be smoothly adjusted with the manual handle on the automatic lock mechanism.
  - Uses SUS316L bellows and a built-in strainer for high reliability.

  Days to Ship:	12 Day(s) or more

• 

  RD-41F Pressure-Reducing Valve (for Vapor), Mini Benten

  VENN

  For food machinery, medical equipment, laundry equipment, and other steam-based machinery/equipment
  
  [Features]
  - A direct-acting pressure reducing valve, ideal for the precise control of steam pressure.
  - Compact and lightweight; best for integrating into devices.
  - Good for items that need to be free of rust, such as food/kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).
  - Stainless steel body for higher-grade vapor lines.
  - Helps guarantee the large (heat) flow rates necessary to start up equipment.
  - Main body made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.
  - Secondary side pressure can be smoothly adjusted with the manual handle for the automatic lock mechanism.
  - Uses SUS316L bellows, equipped in the strainer and is highly durable.

  Days to Ship:	12 Day(s) or more

• 

  RD-30 Type Pressure-Reducing Valve (for Vapor)

  VENN

  Direct acting type general-purpose products (small and medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  ▪ Performs stable operation from the small flow rates that cannot be controlled by pilot-operated products.
  ▪ Structure is little affected by dirt particles, and maintenance is easy.
  ▪ With use of special synthetic rubber diaphragms in multi-purpose direct-acting pressure reducing valve for pipeline and various steam equipment, it can support a wide range of applications.

  Days to Ship:	12 Day(s) or more

• 

  RD-31FN, 32FN Type, Pressure-Reducing Valve HEISEI

  VENN

  Direct acting type general-purpose products (made of bronze, medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  · Calm-flow rusty water countermeasures: Bronze body + Pipe-end core, to prevent rusty water.
  · Low noise design.
  · Smaller and more lightweight by 50% than FC made conventional parts.
  ▪ Water does not leak outside when diaphragm is damaged.
  ▪ Built-in strainer (Equivalent to 40 mesh with nominal diameter of 50 or less).
  · Heisei serves as a bronze water pressure reducing valve meeting the needs of the times [trump card to prevent rusty water].
  ▪Already highly winning high praise, it combines technology of pressure reducing valves for water, with controllability, reliability, and user-friendliness, eliminating rust generation from the flow path including pipe joints in particular.
  · [Heisei] is receiving increased reputation in active countermeasures for rusty water and is used for building facilities, house facilities, plant facilities, boiler water supply, etc.

  Days to Ship:	12 Day(s) or more

• 

  RD-31N, 32N Type Pressure Reducing Valve, Heisei

  VENN

  Direct-acting general-purpose products (made of bronze, medium capacity) for use in construction equipment, factory equipment, etc.
  
  [Features]
  - Serves as a bronze water-pressure reducing valve meeting rust-water prevention needs.
  - We combine our pressure-reduction technology with high controllability, reliability and user-friendliness, eliminating rust generation from pipe joints and across the flow path.
  - Heisei provides reliable countermeasures for rusty water, used in building facilities, house facilities, plant facilities, boiler water supply, etc.
  - Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.
  - Low-noise design.
  - Water does not leak outside if the diaphragm is damaged.
  - Built-in strainer.
  - (Nominal diameter of 50 or less 40 mesh equivalent) Smaller approximately 50% later than FC-made conventional parts.

  Days to Ship:	12 Day(s) or more

• 

  RD-33FN, 34FN Pressure-Reducing Valve HEISEI

  VENN

  Direct acting type general-purpose products (made of bronze, medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  · Heisei serves as a bronze water pressure reducing valve meeting the needs of the times [trump card to prevent rusty water].
  ▪ Already highly winning high praise, it combines technology of pressure reducing valves for water, with controllability, reliability, and user-friendliness, eliminating rust generation from the flow path including pipe joints in particular.
  · [Heisei] is receiving increased reputation in active countermeasures for rusty water and is used for building facilities, house facilities, plant facilities, boiler water supply, etc.
  · Heisei rusty water prevention technique: Bronze body + Pipe-end core, to prevent rusty water.
  · A low noise design.
  · Smaller and weight reduction to about 50% of FC-made conventional parts.
  · Water does not leak outside when diaphragm is damaged.
  · Built-in strainer (Equivalent to 40 mesh with nominal diameter of 50 or less).

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Water, Hot Water, Air, RD-35F/36F Type, [Heisei]

  VENN

  · The [Heisei] series are pressure reducing valves for water made from bronze with stainless main parts. These valves combine corrosion resistance with controllability and reliability for compatibility in production plants, etc.
  
  [Features]
  · The SCS main body eliminates red water and it can also be used with stainless steel piping.
  · A low-noise design.
  · Smaller and lighter in weight by approx. 50% compared to conventional FC made parts.
  · Water does not leak outside if the diaphragm is damaged.
  · A pressure gauge can be installed directly onto the main body (secondary side only).

  Days to Ship:	12 Day(s) or more

• 

  RDB-33FN Type, Pressure Reducing Valve (for Water / Hot Water) with Bypass, Heisei

  VENN

  Pressure reducing valve that integrates three features: pressure reduction, bypass, and stoppage. It also uses space effectively and reduces the cost of facilities.
  
  [Features]
  - The ball-type switchover valve makes function selection easy.
  - The bypass function enables water passage for cleaning the tube.
  - Pressure testing can be done while the pressure reducing valve is mounted.
  Maintenance can be done while water is passing through.

  Days to Ship:	12 Day(s) or more

• 

  RD-31FNW, 34FNW Type Pressure-Reducing Valve, Heisei

  VENN

  Uses direct-acting chlorine water-resistant EPDM for building facilities, air-conditioning equipment, etc.
  
  [Features]
  - Uses chlorine water-resistant EPDM.
  - Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.
  - Water does not leak outside if the diaphragm is damaged.
  - Built-in strainer.
  (Nominal diameter: 50 or less 40 mesh equivalent)

  Days to Ship:	17 Day(s) or more

• 

  RD-43N, Pressure Reducing Valve for Door-to-Door (for Water / Hot Water), Benkei

  VENN

  A pressure-reducing valve for use in small-capacity, door-to-door water and hot water supply pipes installed inside studio apartments, etc.
  · For larger capacity and general complex housing, use types RD-44N, 47N, etc.
  
  [Features]
  · Utilizes chlorine water-resistant EPDM.
  · Sanitary design that prevents pooling of liquids.
  · Reliable construction from low-to-high differential pressure.
  · These are non-disassembly type pressure-reducing valves for safe and secure construction.
  · Post-construction hydraulic testing can be performed with the reducing valve installed.
  · Utilizes a new, simple test gag method.

  Days to Ship:	12 Day(s) or more

• 

  RD-47N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

  VENN

  Pressure reducing valve for hot and cold water supply used in apartment buildings, high-rise buildings, etc.
  
  [Features]
  · Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Eliminates water supply pressure variation difference with elevation difference. 3) No water splashes due to application of appropriate pressure. 4) During maintenance, impact of water outage does not affect wide area. 5. Stable mixing temperature resulting in improved habitability.
  · Uses chlorine water-resistant EPDM.
  · Sanitary design avoids pooling of liquids.
  · Works reliably from low differential pressures to high differential pressure.
  · Easy, simple new test gag method.
  · Safe and secure construction is made possible due to intact pressure-reducing valves.
  · You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.
  ▪ Cassette type valve enables easy maintenance.
  · With a structure without caulking or welding, all components are recyclable and can be segregated and disposed.

  Days to Ship:	12 Day(s) or more

• 

  FD-6N, Fixed Flow Rate Valve (for Individual Resident Water Supply/Hot Water Supply), Benkei

  VENN

  In addition to mainly being used in central hot water supply systems for housing complexes, high-rises, and the like, this fixed flow rate valve is also used in water supplying systems. This adjustable valve automatically restricts flow rates so that flow rate is fixed in response to fluctuations in primary side pressure.
  
  [Features]
  • By using this fixed flow rate valve, it becomes possible to appropriately distribute supplied water and hot water volumes to each residence.
  • As a result, system design and construction work are simplified, energy and water are saved, and water hammer is reduced.
  • Mounting position can be changed to any orientation.
  • Wide working differential pressure range.
  • The simple structure takes advantage of rubber elasticity to maintain a stable flow rate.

  Days to Ship:	12 Day(s) or more

• 

  FD-10N Flow-Regulating Valve (for Excess Flow Control/Water Supply)

  VENN

  [Features]
  · Various lineup of flow rate settings.
  ･ Internal constant flow cartridge can be replaced and maintained.
  · The unique rubber elasticity enables stable and constant flow control.
  ▪ Water can be supplied by various equipment and devices such as water supply pipes or sprinklers, and showers, by limiting the rate of flow to the large-scale water receiving tank so that it is not excessively large.

  Days to Ship:	17 Day(s) or more

• 

  FD-9N, Flow-Regulating Valve (for Excess Flow Control / Water Supply)

  VENN

  Capable of providing suitable flow via regulation to prevent excessive flow for various types of equipment and machinery such as water supply pipes for large receiving tanks, water sprayers, and showers.
  *Consider performing installation in a location as far away as possible from areas that require quiet (hotel rooms, hospital rooms, housing, etc.)
  
  [Features]
  · Rich lineup of flow rate settings.
  ･ An internal constant flow cartridge can be replaced and maintained.
  · The elasticity of the unique rubber component used enables control of a stable and constant flow.

  Days to Ship:	17 Day(s) or more

• 

  RD-25RSN, 50RSN Series Pressure-Reducing Valve for Water Supply

  VENN

  This is a pressure reducing valve used for supplying water to small boilers and electric water heaters. It can be freely mounted horizontally or vertically.

  Days to Ship:	12 Day(s) or more

• 

  LP-8N Type, Water Level-Regulating Valve (for Water and General Use)

  VENN

  A water-level regulating valve for general water tanks that, apart from the insertion type structure of the bronze body and tube end core, has been simplified and made more compact by removing all adjusting mechanisms. Helps prevent rusty water.
  
  [Features]
  • Countermeasure for rusty water: Threaded type - The bronze body + pipe end core can be inserted.
  • A bypass flow path is used for the passage to the pilot piping, facilitating a quiet and stable water supply and ensuring that, even if the water supply from the ball tap is temporarily cut due to surges, water will still be available.
  • Since the valve is simple and compact, handling is easy.
  • Antifreezing FV jackets are provided.

  Days to Ship:	12 Day(s) or more

• 

  LP-9N Type, Level-Regulating Valve (for Water, for General Use)

  VENN

  By using the path to pilot piping as the bypass flow path, there is no influence of intermittent water supply of ball tap due to wave and silent and constant water supply is provided.

  Days to Ship:	12 Day(s) or more

• 

  Constant Water Level Valve, with General-Purpose Adjustment Mechanism, LP-9HN Type

  VENN

  A general-purpose, constant-level valve equipped with an adjustment mechanism. Prevents red water. Therefore, the screw-in can be combined with pipe-end cores.
  
  [Features]
  · Equipped with a flow-rate adjustment mechanism and a valve closing-time needle adjustment.
  · A countermeasure against red water: Screw-in bronze body allowing for pipe end core assemblies.
  · Uses a bypass flow channel for the passage to the pilot pipe.
  Therefore, it provides a quiet and stable water supply without surges effecting the intermittent water supply from the ball tap.
  · A freeze-proof FV jacket is provided.

  Days to Ship:	12 Day(s) or more

• 

  TD-8, 8 A Type Temperature Control Valve

  VENN

  [Features]
  It is a general purpose flange temperature regulating valve, so it is used for temperature regulation in hot water tanks, heat exchangers, heavy fuel heating apparatus, or used for cooling by passing water or refrigerants, or used at low temperatures when the surrounding atmospheric temperature is higher than the set temperature, or when the set temperature is 40°C or less.

  Days to Ship:	12 Day(s) or more

• 

  AF-10 Series, Air Vent Valve

  VENN

  A stainless steel air relief valve with excellent corrosion resistance and durability, with a strainer built-in to the main body, and with air intake and exhaust functions.
  
  [Features]
  · Easy design installation possible with the built-in strainer.
  · Stainless steel with superior corrosion resistance and durability.
  · The discharge port can be freely rotated 360°, so installation is simple.
  · Equipped with a manual shut-down control.

  Days to Ship:	12 Day(s) or more

• 

  AF-9 Series Air Vent Valve

  VENN

  Air vent valve with built-in check valve such as pump suction side or sealed circuit
  
  [Features]
  · Air vent valve made of stainless steel with built-in strainer in the main body that boasts superior corrosion resistance and durability. The AF-10 type series has air intake and exhaust functions.
  · AF-9 type series is an air vent valve with a built-in check valve and is structured to not intake here even when the inlet side is exposed to negative pressure. Hence, it is used when a function is required for only emitting and not in taking the air, such as in the pump suction inlet side and degassing system of sealed circuits.
  · Easy design construction possible with the built-in strainer.
  · Made of stainless steel for superior corrosion resistance and durability.
  · The exhaust vents can be freely rotated 360° and are easy to work with.
  · Equipped with manual shut-down control.
  · Does not absorb air even when the pressure is negative, and therefore can be mounted into the pump suction inlet side.

  Days to Ship:	11 Day(s) or more

Loading...