(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Locating Pins（Mounting Side Shape：Tapped）
Basic Shape
-
Large Head -
Small Head -
Straight / Air Vent -
Shouldered -
Screw Mounted -
Flanged -
Double-Stepped -
Straight
-
Locating Pins - Tip Shape Selectable (Straight Tapped)
MISUMI
- Locating Pins - Tip Shape Selectable (Straight Tapped) from MISUMI.
- The tip shape is selectable from three types. To be mounted from back using bolts. Improved maintainability compared to the press fit type.
- The material of locating pin can be selected 4 types, S45C Equivalent, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless of round type and diamond type has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)
MISUMI
- Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
- The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
- The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS304 may not be polished and may have no centering hole.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- A machining step remains on the shoulder top for Diamond shape.Days to Ship: 5 Day(s) or more -
- On Sale Till 31/03/2025
Locating Pins - Large Head, Tapered (Tapped)
MISUMI
- Locating Pins - Large Head, Tapered (Tapped) from MISUMI.
- Large Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Locating Pins - Small Head, Tapered (Tapped)
MISUMI
- Locating Pins - Small Head, Tapered (Tapped) from MISUMI.
- Small Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Special Price Days to Ship: Same day or more -
Locating Pins - Large Flat Head (Tapped)
MISUMI
- Locating Pins - Large Flat Head (Tapped) from MISUMI.
- Large Flat Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tolerance of the mounting part is g6.- Volume Discount
Days to Ship: 4 Day(s) or more -
Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped)
MISUMI
Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.
Days to Ship: 18 Day(s) or more -
Locating Pins - Shouldered (Tapered, Tapped)
MISUMI
- Locating Pins - Shouldered (Tapered, Tapped) from MISUMI.
- Shouldered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 2 types, steel SKS3 Equivalent, stainless steel SUS304.
- A machining step remains on the shoulder top for Diamond shape.
- SUS304 may not be polished and may have no centering hole.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 4 Day(s) or more -
- On Sale Till 31/03/2025
Locating Pins - Air Vent (Tapped)
MISUMI
- Locating Pins - Air Vent (Tapped) from MISUMI.
- Since there is an air groove, it is easy to insert a pin. It is attached with a female thread.
- The material of pin can be selected 3 types, SUJ2 or SUS304 Equivalent, SUS440C or 13Cr stainless.
- Mounting method can be selected 2 types, Thread or Tapped.
- The outer diameter of pin can be selected 5 sizes, 5, 6, 8, 10, and 12 mm.
- The tolerance of outer diameter is g6.- Volume Discount
Special Price Days to Ship: Same day or more -
Locating Pins - Sphere Large Head (Tapped)
MISUMI
- Locating Pins - Sphere Large Head (Tapped) from MISUMI.
- Sphere Large Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The spherical head may be polished.- Volume Discount
Days to Ship: 4 Day(s) or more -
Locating Pins - Large Head Tapered (Plastic Tip - Tapped)
MISUMI
- Locating Pins - Large Head Tapered (Plastic Tip - Tapped) from MISUMI.
- Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
- SUS304 locating Pins may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 12 Day(s) or more -
Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped)
MISUMI
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped) from MISUMI.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.Days to Ship: 3 Day(s) or more -
Locating Pins - Sphere Small Head (Tapped)
MISUMI
- Locating Pins - Sphere Small Head (Tapped) from MISUMI.
- Sphere Small Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The spherical head may be polished.- Volume Discount
Days to Ship: 3 Day(s) or more -
MISUMI
A Small Head Plastic Pin used as the Workpiece Holder.
Days to Ship: 18 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Tapped
MISUMI
- Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished and centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.Days to Ship: 4 Day(s) or more -
MISUMI
- Pusher Pins – Straight from MISUMI.
- Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
- The material of pin can be selected 3 types, Conductive MC Nylon CDR2 (Black), PEEK (Natural Ivory), Polyacetal (White).
- The outer diameter of pin can be selected 7 sizes, 6, 8, 10, 12, 15, 20 and 25 mm.
- The mounting thread length is M x 2. (When L<20, the mounting thread length is M x 1.5).Days to Ship: 17 Day(s) or more -
Locating Pins - High Hardness Stainless Steel, Straight (Tapped)
MISUMI
- Locating Pins - High Hardness Stainless Steel, straight (Tapped) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
- For tapped type, unless described otherwise on the drawing, the spec. design is the same as for Press Fit Type. For D Tolerance g6, h7, no Insertion guide is provided. (ℓ1)Days to Ship: 18 Day(s) or more -
Locating Pins - Straight, Tapered (Tapped)
MISUMI
- Locating Pins - Straight, Tapered (Tapped) from MISUMI.
- The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
- The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 4 Day(s) or more -
Locating Pin High Hardness Stainless Small Head Spherical - Tapped -
MISUMI
For High Hardness Stainless Steel Sphere Small Head, the configurable range of dimensions has been further widened and the number of available alterations has been increased. For orders of up to 1,000 pcs., 7th day shipping is available.
Days to Ship: 18 Day(s) or more -
Height Adjusting Pins - Counterbored
MISUMI
- Height Adjusting Pins – Counterbored from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.Days to Ship: 3 Day(s) or more -
Feed Pins - Shouldered - Tapped
MISUMI
Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.
Days to Ship: 17 Day(s) or more -
MISUMI
Weld nut detection pin. Please use it together with the workpiece detection unit (PCPNA).
Days to Ship: 18 Day(s) or more -
Locating Pins - Straight, Sphere (Tapped)
MISUMI
- Locating Pins - Straight, Sphere (Tapped) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.Days to Ship: 3 Day(s) or more -
Locating Pins - Small Flat Head (Tapped)
MISUMI
Small Flat Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to the press fit type.
- Volume Discount
Days to Ship: 4 Day(s) or more -
MISUMI
- Feed Pins - Solid – Tapped from MISUMI.
- Length of tapered part can be specified depending on applications or environment. It is attached with a female thread.
- SUS304 feed Pins may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 17 Day(s) or more -
MISUMI
Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 4 Day(s) or more -
Locating Pins Double Stepped - Tapped
MISUMI
[Features]Suitable for positioning workpieces with different hole diameters. It is attached with a female thread.
Days to Ship: 17 Day(s) or more -
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)
MISUMI
- Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) from MISUMI.
- Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 4 Day(s) or more -
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped)
MISUMI
Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 4 Day(s) or more -
Locating Pins for Grippers - Tapped
MISUMI
[Features]Positioning pin female thread type used for mounting an opening / closing chuck.
Days to Ship: 4 Day(s) or more -
Days to Ship: 18 Day(s) or more -
Locating Pins - High Hardness Stainless Steel Sphere Large Head (Tapped)
MISUMI
Sphere Large Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
Days to Ship: 18 Day(s) or more -
Locating Pins - High Hardness Stainless Steel, Large Flat Head (Tapped)
MISUMI
Large Flat Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
Days to Ship: 18 Day(s) or more -
Locating Pins - High Hardness Stainless Steel, Small Head, Tapered (Tapped)
MISUMI
For High Hardness Stainless Steel, Small Head Tapered Type, the configurable range of dimensions has been further widened. For order of up to 1,000 pcs., the 7th Day Shipping is available.
Days to Ship: 18 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.Days to Ship: 4 Day(s) or more -
Locating Pins - Large Flat Head - Side Locating - Tapped
MISUMI
Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.
Days to Ship: 4 Day(s) or more -
Locating Pins - Plastic, Large Head - Tapped
MISUMI
Plastic Locating Pins which prevent workpiece damages.
Days to Ship: 18 Day(s) or more -
Locating Pins - Pilot Pins - Tapped
MISUMI
[Features]It is inserted and positioned for purposes such as preventing pitch deviation. It is attached with a female thread.
Days to Ship: 18 Day(s) or more -
Locating Pins for Height Adjusting - Small Head Tapped
MISUMI
Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.
Days to Ship: 4 Day(s) -
Locating Pins - Large Head, Tapered - Tapped
MISUMI
Nonmagnetic (Aluminum) Locating Pins. Does not magnetically affect the surroundings.
Days to Ship: 18 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a female thread.
Days to Ship: 4 Day(s) or more -
Locating Pins-High Hardness Stainless Steel/R/Taper R/Tapped
MISUMI
R and Taper R Types have been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.
Days to Ship: 18 Day(s) or more -
Locating Pins-High Hardness Stainless Steel/Small Flat Head/Tapped-
MISUMI
For High Hardness Stainless Steel Small Flat Head, the configurable range of dimensions has been further widened and the number of available alterations has been increased. For orders of up to 1,000 pcs., 7th day shipping is available.
Days to Ship: 18 Day(s) or more -
Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection - Tapped -
MISUMI
Straight Type with the diameter configurable in 0.01 mm increments has been newly offered. For orders of up to 1,000 pcs., 7th day shipping is available.
Days to Ship: 18 Day(s) or more -
Locating Pin High Hardness Stainless Steel Taper with Flange - Female Thread -
MISUMI
Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.
Days to Ship: 18 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Basic Shape |
| Insertion Guide Tip Shape |
| Insertion Guide Tip Type |
| Insertion Guide Specifications |
| Mounting Side Shape |
| Surface Treatment |
| Heat Treatment |
| Material |
| Insertion Guide Outer Dia. D1(mm) |
| Insertion Guide Tolerance |
| Mounting Side Outer Dia. d(Ø) |
| Mounting Side Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) | Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped) | Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped) | Locating Pins - High Hardness Stainless Steel, Straight (Tapped) | Locating Pin High Hardness Stainless Small Head Spherical - Tapped - | Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) | Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped) | Locating Pilot Pins - B Dimension Configurable - Female Thread/ without Flathead Slot | Locating Pins - High Hardness Stainless Steel Sphere Large Head (Tapped) | Locating Pins - High Hardness Stainless Steel, Large Flat Head (Tapped) | Locating Pins - High Hardness Stainless Steel, Small Head, Tapered (Tapped) | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped) | Locating Pins-High Hardness Stainless Steel/R/Taper R/Tapped | Locating Pins-High Hardness Stainless Steel/Small Flat Head/Tapped- | Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection - Tapped - | Locating Pin High Hardness Stainless Steel Taper with Flange - Female Thread - | |||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 3 Day(s) or more | 5 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 18 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 12 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 18 Day(s) or more | 4 Day(s) or more | 17 Day(s) or more | 18 Day(s) or more | 4 Day(s) or more | 18 Day(s) or more | 3 Day(s) or more | 17 Day(s) or more | 18 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 17 Day(s) or more | 4 Day(s) or more | 17 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 4 Day(s) | 18 Day(s) or more | 4 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more |
| Basic Shape | Large Head / Straight | Shouldered | Large Head | Small Head | Large Head | Large Head | Shouldered | Straight / Air Vent | Large Head | Large Head | Shouldered | Small Head | Small Head | Large Head | Straight / Air Vent | Straight / Air Vent | Straight / Air Vent | Small Head | Small Head | Shouldered | Small Head | Straight / Air Vent | Small Head | Large Head | Large Head | Double-Stepped | Small Head | Small Head | Screw Mounted | Large Head | Large Head | Large Head | Small Head | Large Head | Large Head | Large Head | Large Head | Small Head | Large Head | Shouldered | Large Head | Small Head | Straight / Air Vent | Shouldered |
| Insertion Guide Tip Shape | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round | Round | Round | Round / Diamond | Round / Diamond | Round | Round | Round | Round | Round | Round | Round | Round / Diamond | Round | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round | Round | Round | Round / Diamond | Round | Round / Diamond | Round | - | Round / Diamond |
| Insertion Guide Tip Type | Tapered / Taper R / R | Tapered / Taper R / R | Tapered | Tapered | Flat | Tapered | Tapered | Tapered | Spherical | Tapered | Tapered | Spherical | Spherical / Flat | Tapered | Tapered / Taper R / Spherical / Flat | Tapered / Spherical | Tapered | Spherical | Tapered | Tapered | Tapered / Taper R / Spherical | Spherical | Flat | Tapered | Flat | Tapered | Spherical | Flat | Flat | Round Tapered | Spherical | Flat | Tapered | Spherical | Flat | Tapered / Spherical / Flat | Round Tapered | Spherical | Tapered | Tapered | Taper R / R | Flat | Tapered / Taper R / R | Tapered |
| Insertion Guide Specifications | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / With Flathead Slot | Not Provided | Not Provided | Not Provided | - | - | - | - |
| Mounting Side Shape | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped | Tapped |
| Surface Treatment | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Electroless Nickel Plating | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided | Not Provided | Not Provided | Not Provided | Anodize | Not Provided / Hard Chrome Plating | Not Provided | Not Provided | Not Provided | Not Provided |
| Heat Treatment | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided / Directly Quenching | Not Provided | Not Provided | Not Provided / Directly Quenching | - | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Directly Quenching | Not Provided / Carburized | Not Provided | Not Provided / Directly Quenching | Not Provided | Not Provided | Not Provided / Directly Quenching | Not Provided | Not Provided | Not Provided | Not Provided |
| Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Resin | Steel / Stainless Steel | Resin | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Resin | Steel / Stainless Steel | Stainless Steel | Aluminum | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Insertion Guide Outer Dia. D1(mm) | 6 ～ 35 | 5 ～ 22 | 5.5 ～ 30 | 3 ～ 20 | 5.5 ～ 30 | 6.5 ～ 17.5 | 3 ～ 20 | 5 ～ 12 | 5.5 ～ 30 | 5.5 ～ 30 | 3 ～ 20 | 3 ～ 20 | 3 ～ 25 | 5 ～ 30 | 6 ～ 25 | - | 5 ～ 10 | 4 ～ 16 | 3 ～ 20 | 4 ～ 11 | 5 ～ 14 | 5 ～ 10 | 4 ～ 20 | 6.5 ～ 13 | 6.5 ～ 30 | 6 ～ 30 | 4 ～ 20 | 4 ～ 20 | - | 6 ～ 15 | 6.5 ～ 17.5 | 6.5 ～ 17.5 | 4 ～ 16 | 5 ～ 30 | 8.5 ～ 30 | 6.5 ～ 15 | 6 ～ 15 | 2.5 ～ 4 | 6.5 ～ 25 | 4 ～ 20 | 6.5 ～ 17.5 | 4 ～ 16 | - | 3 ～ 13 |
| Insertion Guide Tolerance | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | h6 | 0/-0.01 | 0/-0.01 | g6 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.3 | 0/-0.01 ～ h7 | 0/-0.3 | g6 ～ h7 | g6 ～ h7 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.2 | g6 ～ h7 | h6 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 ～ h7 | g6 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.05 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ h7 | - | 0/-0.01 | - | - |
| Mounting Side Outer Dia. d(Ø) | 6 ～ 20T | 6 ～ 20 | 5 ～ 20T | 5 ～ 20T | 5 ～ 20T | 6 ～ 12 | 5 ～ 20T | 5 ～ 12 | 5 ～ 20T | 5 ～ 20 | 5 ～ 20 | 5 ～ 20T | 6 ～ 25 | 5 ～ 20T | 6 ～ 25 | 6 ～ 10 | 5 ～ 10 | 6 ～ 16 | 5 ～ 20 | 6 ～ 10 | 12 ～ 16 | 5 ～ 10 | 6 ～ 20T | 6 ～ 10 | 6 ～ 20T | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 10 ～ 32 | 5 ～ 10 | 6 ～ 12 | 6 ～ 12 | 6 ～ 16 | 5 ～ 20T | 6 ～ 20 | 6 ～ 10 | 5 ～ 10 | 5 ～ 6 | 6 ～ 16 | 6 ～ 20 | 6 ～ 12 | 6 ～ 16 | 6.01 ～ 25.5 | 6 ～ 12 |
| Mounting Side Tolerance | g6 | g6 | g6 | g6 | g6 | g6 ～ h7 | g6 | g6 | g6 | g6 | g6 | g6 | 0/-0.3 | g6 ～ h7 | 0/-0.3 | g6 ～ h7 | g6 ～ h7 | g6 ～ h7 | g6 ～ h7 | g6 | ±0.2 | g6 ～ h7 | g6 | g6 | g6 ～ h7 | g6 | g6 ～ h7 | g6 ～ h7 | g6 | g6 | g6 ～ h7 | g6 ～ h7 | g6 ～ h7 | g6 ～ h7 | g6 | g6 | 0.012/0.007 ～ g6 | g6 | g6 | g6 ～ h7 | g6 ～ h7 | g6 ～ h7 | g6 ～ h7 | - |
Loading...
Configure
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond -
Triangle
-
-
Insertion Guide Tip Type
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Ball End -
Bullet Nose
-
-
Insertion Guide Specifications
-
Not Provided -
With Screw Mount Hole -
With Hex Socket -
With Flathead Slot -
Tapped
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded -
Circumference Groove -
Notch -
Set Screw Flat
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
- Anodize
- Polishing
- Isonite Treatment
-
Heat Treatment
- Not Provided
- Carburized
- Directly Quenching
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Insertion Guide Outer Dia. D1(mm)
-
Insertion Guide Tolerance
-
Mounting Side Outer Dia. d(Ø)
-
Mounting Side Tolerance
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 12 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy