Rollers（Material：Aluminum）

• 

  With urethane/rubber roller bearing

  MISUMI

  roller with a bearing that can be selected from various resins and hardnesses. There are two types of shapes: straight type and crown type.
  The material of the core metal can be selected from steel (equivalent to S45C), stainless steel (SUS304), and aluminum (aluminum alloy).
  For the lining, you can specify urethane (natural color), antistatic urethane (gray), silicone rubber (light gray), heat-resistant urethane (reddish brown), or NBR (black).
  Shore hardness can be selected from Shore A50 to Shore A95. Please check the outline drawing and specification table for availability.
  A90/95 is ether urethane, A50/A70 is ester urethane.
  It is possible to specify dimensions in 1mm increments for the L specification type, but the length that can be specified for the L dimension selection type cannot be selected.
  Additional machining (MC) allows tapping holes to be machined at two locations on the outside diameter. In addition, (UDC) allows you to change the urethane to antistatic urethane.
  The bearing material can be changed to stainless steel type with additional machining (SB). Please refer to the specification table for the range of dimensions that can be specified.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Urethane Kined Rollers - Straight Type with Keyway

  MISUMI

  A urethane roller with a keyway machined into the shaft hole that allows you to specify the length. You can choose from two types: straight type and tapped type.
  In addition, it is possible to change the material to antistatic urethane through additional machining and specify the length of the roller in 1 mm increments.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Urethane/Rubber Rollers - Straight, Crowned Type

  MISUMI

  roller with various resins and hardnesses to choose from. There are two types of shapes: straight type and crown type.
  The material of the core metal can be selected from steel (equivalent to S45C), stainless steel (SUS304), and aluminum (aluminum alloy).
  For the lining, you can specify urethane (natural color), antistatic urethane (gray), silicone rubber (light gray), heat-resistant urethane (reddish brown), or NBR (black).
  Shore hardness can be selected from Shore A50 to Shore A95. Please check the outline drawing and specification table for availability.
  A90/95 is ether urethane, A50/A70 is ester urethane.
  It is possible to specify dimensions in 1mm increments for the L specification type, but the length that can be specified for the L dimension selection type cannot be selected.
  Additional machining (MC) allows tapping holes to be machined at two locations on the outside diameter. In addition, (UDC) allows you to change the urethane to antistatic urethane.
  Please refer to the specification table for the range of dimensions that can be specified.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Urethane Rollers with Collars

  MISUMI

  3rd business day shipping is available for Urethane Rollers with Collars. Wide sizes are offered with the O.D. Ø10~80 and L5~50.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Urethane Rollers - Straight Type, Urethane Thickness Selectable

  MISUMI

  5mm or 10mm can be selected for the Urethane Thickness.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Rollers - With Core Material Press Fit Bearings

  MISUMI

  roller with a bearing that has a core material press-fitted into urethane rubber, foamed urethane, or chloroprene rubber. There are two types of core material: SUS304 or aluminum alloy.
  Can be changed to stainless steel bearing with additional machining (SB). Shore (hardness) can be selected from A90, A65, and A25.
  A90 is ether-based, and urethane A65 is ester-based.
  Change to antistatic urethane is also possible by specifying additional work.
  Urethane foam has extremely low permeability to water, oil, and chemicals compared to sponge, and has excellent grip and shock absorption, making it suitable for transporting thin objects.
  Chloroprene rubber has superior heat resistance, cold resistance, and oil resistance compared to natural rubber.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  With metal roller bearing

  MISUMI

  Standard expansionThe total length of the roller can now be specified in 1mm increments! Please use the L dimension specified type. FeaturesA roller with a bearing that can be selected from various metals and surface treatments. There are two types of shapes: straight type and crown type.
  You can choose the material from steel (equivalent to S45C), stainless steel (SUS304), or aluminum (aluminum alloy).
  For the L designation type, dimensions can be specified in 1mm increments!
  In addition, the bearing can be changed to a stainless steel type with additional machining (SB). Please refer to the specification table for the range of dimensions that can be specified.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• • On Sale Till 31/03/2025

  

  Urethane Rollers - with Collars - Set Screw Hole

  MISUMI

  "Have the one end hubbed and thus, can be fastened to shafts easily by using set screws."

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	10 Day(s) or more

• 

  Urethane Rollers with Bearing, Straight Type, Urethane Thickness Selectable

  MISUMI

  5mm or 10mm can be selected for the Urethane Thickness.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Urethane Rollers - Side Through Hole

  MISUMI

  A roller with holes on the side whose core material is baked with natural urethane color (Shore A90).
  A90 is an ether-based urethane.
  It can be used by attaching it to the shaft with a set collar.
  Also, it is possible to change from a through hole to a tapped hole with additional machining.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Groove Rollers - With Bearings

  MISUMI

  "Have the groove machined on the Urethane part and thus, are useful for tape feed mechanisms, etc."

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Urethane, Rubber Rollers - Press-Fit Straight Type

  MISUMI

  roller with a core material press-fitted into urethane rubber, urethane foam, or chloroprene rubber. Shore (hardness) can be selected from A90, A65, and A25.
  Urethane A90 is ether-based and A65 is ester-based.
  Change to antistatic urethane is also possible by specifying additional work.
  Urethane foam has extremely low permeability to water, oil, and chemicals compared to sponge, and has excellent grip and shock absorption, making it suitable for transporting thin objects.
  Chloroprene rubber has superior heat resistance, cold resistance, and oil resistance compared to natural rubber.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Urethane, Rubber Lined Rollers - Straight Set Screw Type

  MISUMI

  lining roller with a set screw machined on the shaft end. There are two types of core material: SUS304 or aluminum alloy.
  You can choose from three types for the lining: urethane, silicone, and heat-resistant urethane.
  Urethane has excellent wear resistance and mechanical strength, and the hardness can be selected from A90, A70, and A50.
  A90 is ether urethane, A50/A70 is ester urethane.
  Also, it can be changed to antistatic urethane with additional machining (UDC).
  Silicon has excellent chemical resistance and heat resistance. Heat-resistant urethane has excellent mechanical strength and can be used for heat-resistant applications (up to 110℃).

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Metal Rollers - Straight, Crowned

  MISUMI

  Standard expansionThe total length of the roller can now be specified in 1mm increments! Please use the L dimension specified type. FeaturesA roller with a variety of metals and surface treatments available. There are two types of shapes: straight type and crown type.
  You can choose the material from steel (equivalent to S45C), stainless steel (SUS304), or aluminum (aluminum alloy).
  For the L designation type, dimensions can be specified in 1mm increments!
  Also, with additional machining (MC), tapped holes can be machined at two locations on the outside diameter. Please refer to the specification table for the range of dimensions that can be specified. Related products[New product] Grooved roller for round belts: Multiple grooves on one roller This makes it possible to reduce the number of parts!!

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Urethane Rollers - with Thread

  MISUMI

  This is a tapped type urethane lining roller. By using a tap, it can be easily attached to the shaft.
  There are two types of shapes: straight or crown type. The material of the core metal can be selected from stainless steel (SUS304) and aluminum (aluminum alloy).
  The shore hardness of urethane (natural color) can be specified as A50, A70, or A90.
  A90 is ether urethane, A50/A70 is ester urethane. In addition, (UDC) allows you to change the urethane to antistatic urethane.
  Please refer to the specification table for the range of dimensions that can be specified.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Urethane Rollers - Knurled Type - with Set Screw Holes

  MISUMI

  Urethane Rollers knurled to help grasp workpieces securely.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Hollow Aluminum Rollers

  MISUMI

  "Have the Aluminum Tube adopted and thus, are inexpensive."

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Rollers-Straight Type/Crown Type (L=15~100)

  MISUMI

  • Price Down

  Days to Ship:	20 Day(s) or more

• 

  Plastic Rollers -Press Fit

  MISUMI

  This is a resin roller with core material pressed into resin. There are two types of shape: straight type and bearing type.
  The material properties are as follows.
  Polyacetal: It has excellent mechanical strength.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	19 Day(s) or more

• 

  Metal Rollers - Female Thread Type

  MISUMI

  This is a metal roller with a tap. By using a tap, it can be easily attached to the shaft.
  There are two types of shapes: straight or crown type. You can choose the material from stainless steel (SUS304) or aluminum (aluminum alloy).
  Please refer to the specification table for the range of dimensions that can be specified.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Grooved Urethane Rollers

  MISUMI

  "Have the groove machined on the Urethane part and thus, are useful for tape feed mechanisms, etc."

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Metal Rollers - with Oil Free Bushings (Core Only)

  MISUMI

  Since it uses an oil-free bushing instead of a bearing, it is a space-saving metal roller with an outer diameter of φ8 or more.
  Please choose the material of the roller from stainless steel (SUS304) or aluminum (aluminum alloy).
  For details on the dimensions of the bush, please refer to the details of the bush in the external drawings and specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Urethane Rollers - with Oil Free Bushings

  MISUMI

  Since an oil-free bushing is used instead of a bearing, this is a space-saving urethane lining roller that can accommodate outer diameters (core metal dimensions + urethane thickness) of φ14 and up.
  The rollers are lined, so they can be transported without damaging the workpiece.
  Please choose the material of the roller from stainless steel (SUS304) or aluminum (aluminum alloy).
  The hardness of urethane (natural color) is Shore A90.
  A90 is an ether-based urethane. For detailed bushing dimensions, please refer to the bushing details in the external drawings and specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

Loading...