(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Lever（Mounting Section, Surface Treatment：Black Oxide）
[Applications] Clamp, operation
[Clamp Types] Clamp mechanism, cam mechanism, ratchet mechanism
[Materials] Stainless steel, steel, zinc alloy, resin, etc.
| Days to Ship |
|
|---|
-
Miniature Clamp Levers/Threaded
MISUMI
[Features]·A miniature clamp lever with a short lever.
- Volume Discount
Days to Ship: Same day or more -
IMAO CORPORATION
Machine lever for tightening and loosening screws without tools.
[Features]
・ In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged.
・ After tightening, you can turn the lever freely to any position.
・ Can be used in tight places where a lever cannot be turned 360°.
・ After screw tightening, the lever can be moved to an arbitrary position.
・ Main unit available in 4 colors (silver, black, red and orange).
[Applications]
・ For position-adjusting parts, such as slides and slotted holes, etc.- Volume Discount
Days to Ship: Same day or more -
Resin Clamp Levers/Straight Handle
MISUMI
[Features]·A general-purpose clamp lever. [Material]·Resin type
- Volume Discount
Days to Ship: Same day or more -
IMAO CORPORATION
Cam lever for tightening and loosening screws without tools.
[Features]
· Lift the handle to disengage the teeth from the locking element.
· Standard type that boasts steady popularity.
· Can be used in tight places where a handle cannot be turned 360°.
· After screw tightening, the lifted handle can be moved to an arbitrary position.
· Spherical handle tip prevents slipping and is easy to grip.
[Applications]
· For position-adjusting parts, such as slides and long holes, etc.- STOCK
Days to Ship: Same day or more -
Resin Clamp Levers/Curved Handle
MISUMI
[Features]·A general-purpose clamp lever. [Material]·Resin type
- Volume Discount
Days to Ship: Same day or more -
MISUMI
[Features]·It is a general-purpose flat type tension lever.
- Volume Discount
Days to Ship: Same day or more -
Resin Clamp Levers/with Push Button
MISUMI
A push-type resin clamp lever. [Material]Stainless steel / steel
- Volume Discount
Days to Ship: Same day or more -
MISUMI
Ratchet function allows you to easily change the direction of operation
- Volume Discount
Days to Ship: Same day or more -
NABEYA BI-TECH
Good design award received. Plastic made clamp lever.
Days to Ship: Same day or more -
NABEYA BI-TECH
Zinc die-cast clamp lever.
[Features]
·A wide range of screw sizes from M3 to M16.
·You can choose the thread material and surface treatment.
·The lever part has a matte electrostatic coating that makes scratches less noticeable.
·Four color variations are available for the lever. Selectable by the end symbol of the part number.
[Applications]
·For tightening after adjusting the workpiece position.
·Ideal for applications that are frequently opened and closed.Days to Ship: Same day or more -
IMAO CORPORATION
[Features]
· Since the screw part rotates in the male screw type, the direction of the lever can be adjusted arbitrarily.- Volume Discount
- STOCK
Days to Ship: Same day or more -
Safety Tension Lever (STF-N, ST-N)
IMAO CORPORATION
Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.
[Features]
· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
· Besides the door knob, all is made from stainless steel, so it is robust and strong.
· In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handlingDays to Ship: 10 Day(s) or more -
IMAO CORPORATION
[Features]
· When the lever is pulled, the serrations mesh and lever handle becomes free.
· The upper part of the boss protrudes, and the lever lifting is easy.Days to Ship: Same day or more -
MISUMI
[Features]·The serration can be easily released by pressing the screw head with your thumb
- Volume Discount
Days to Ship: 16 Day(s) or more -
MISUMI
[Features]·It can be used without interference when there is no upper space.
- Volume Discount
Days to Ship: Same day or more -
MISUMI
[Features]·A butterfly-shaped clamp lever. [Material]Available in stainless steel or steel.
- Volume Discount
Days to Ship: Same day or more -
MISUMI
·A miniature resin clamp lever. [Clamp Type]Clamping mechanism, "Operating direction" horizontal
- Volume Discount
Days to Ship: 8 Day(s) or more -
Adjustable Torque Controller Lever (ATCL)
IMAO CORPORATION
[Features]
· Clamp lever with torque setting function / lever position can be changed.
· Tightening torque can be set.
· When the set torque is reached, there is a click feeling that confirms completion of tightening.Days to Ship: Same day or more -
IMAO CORPORATION
In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Mini type with small turning radius.
Days to Ship: Same day or more -
IMAO CORPORATION
In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
[Features]
· Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
· If interference of the lever occurs during operation, a short lever can be installed and usedDays to Ship: Same day or more -
Plastic Clamping Levers ZR, ZF
KONISHI
Lever used for fixing the position. Since the lever part is made from polyamide, the weight of the machine can be reduced. A zinc die-cast insert has been inserted in the serration part.
- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
Push-Off Clamping Lever PCM, PC
KONISHI
It is a lever used when fixing the positioning. By pushing the lever down, the serration (tooth cutting part) inside the lever is released and the lever becomes free, so it is possible to prevent malfunction. Select a product that can be used with an appropriate load from 5 types with different turning radii of the lever.
- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
MISUMI
A Y-shaped clamp lever. [Specifications]·Operating direction: horizontal. ·Type of mounting section: male thread.
- Volume Discount
Days to Ship: 16 Day(s) or more -
MISUMI
In the normal position, the lever is free, so even if you accidentally turn the lever, the clamp will not loosen.
- Volume Discount
Days to Ship: 8 Day(s) or more -
Tension Levers/Safety Tension Levers
MISUMI
A tension lever. [Applications]Clamp, "Clamp type" clamp mechanism, "Operating direction" horizontal
- Volume Discount
Days to Ship: 16 Day(s) or more -
NABEYA BI-TECH
You can easily fix it to the shaft simply by tightening the screw.
Days to Ship: Same day or more -
NABEYA BI-TECH
[Features]
· For locations where there is no clear space up or down.
· The handle position can be adjusted freely.
· All stainless steel and steel types standard.
· Large turning radius and clamping force can be obtained with lesser force.Days to Ship: 11 Day(s) or more -
NABEYA BI-TECH
Clamping lever using spiral latch. Tightening can be adjusted without any steps of moving up and down of lever.
Days to Ship: Same day or more -
NABEYA BI-TECH
Flat lever type. For use in places where upper space is limited.
Days to Ship: Same day or more -
NABEYA BI-TECH
In combination with a plunger and calculating/positioning lever.
Days to Ship: 16 Day(s) or more -
NABEYA BI-TECH
[Features]
· High strength type of clamping lever.
· Standardized steel and all stainless steel types.
· We also manufacture products with customized specifications, such as the turning radius of the lever.
· Material: finishing lever screw: S45C, tetra-iron oxide coating (black) LTM, LTF. SUS303: LTMS, LTFS. Grip (plastic pole PB): Phenol resin (black)Days to Ship: Same day or more -
Days to Ship: Same day or more -
Days to Ship: Same day or more -
NABEYA BI-TECH
Compact type clamp lever. Turning radius of 30 mm. Space-saving.
Days to Ship: 11 Day(s) or more -
IMAO CORPORATION
A gentle curve of the arm and polyamide lever handle give a gentle feel to the hands due to the hemispherical finish at the tip.
[Features]
· A gentle curve of the arm and a hemispherical finish of the tip gives a gentle hand grip, enabling a smooth and powerful operation.
· The boss hole can be easily covered with the accessory cap after installation.
· Pilot holes are processed.
· ECL32 to 54 can be used in a snap system by installing the optional ball & spring.
· A groove is provided in the boss for the stop pin that limits the lever operating angle to an angle of 125 ±1°Days to Ship: Same day or more -
IMAO CORPORATION
By using the optional CLB, you can also use the snap method with this lever handle.
[Features]
· The boss hole can be easily covered with the center plate accessory after installation.
· Optional ball & spring can be installed, and snap method can be used.
· In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.
· For grip, PG type is usedDays to Ship: Same day or more -
IMAO CORPORATION
[Features]
· Standard type lever handle that can be used widely.
· For grip, PG type is usedDays to Ship: Same day or more -
EALA Ergo Adjuster Clamp Lever (With Hex Socket Head)
IMAO CORPORATION
Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.
[Features]
· Curved design of the entire lever part gives a comfortable grip feeling.
· We accept additional workDays to Ship: Same day or more -
IMAO CORPORATION
In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.
[Features]
· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
· Besides the door knob, all parts are made from stainless steel, so it is robust and strongDays to Ship: Same day or more -
IMAO CORPORATION
Cam lever for tightening and loosening screws without tools.
[Features]
· 2 types of surface treatment available black oxide coating and electroless nickel plating.
· Handle of stud type cam be adjusted in any direction.
[Applications]
· Ideal for use in screw-tightening and loosening parts where usage is high.Days to Ship: 10 Day(s) or more -
IMAO CORPORATION
All SCM made, this ratchet type lever handle appears heavy.
[Features]
· Powerful ratchet lever that works in both forward and reverse directions.
· Demonstrates good strength when working in narrow placesDays to Ship: 10 Day(s) or more -
KONISHI
[Features]
· Lever used for fixing the position.
· Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.
· Compared to conventional products, it is easy to use and cheap- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
KONISHI
[Features]
・ It is a lever used when fixing the positioning
・ By lifting the lever up, the serrations inside the lever will come off. Since the lever is free, you can always move the lever to a position where it is easy to operate, which enables smoother tightening operation.- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
KONISHI
Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Amongst the products with 5 different types of turning radius, select the one that can be used with the appropriate load.
- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
KONISHI
Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.
- CAD ：
- 2D
Days to Ship: 10 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Application |
| Shape |
| Mounting Section Dia. d (mm) or Nominal Dia. |
| Type, Clamp |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| L-Shaped Clamp Lever Shape |
| Mounting Section, Length L(mm) |
| Knobbed Lever Shape |
| Operation Direction |
| Type, Operation |
| Main Body, Surface Treatment |
| Mounting Section, Material |
| Mounting Section, Surface Treatment |
| Knob Material |
| Knob Surface Treatment |
| Gap Adjustment Screw |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | IMAO CORPORATION | MISUMI | IMAO CORPORATION | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | MISUMI | MISUMI | MISUMI | MISUMI | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | KONISHI | KONISHI | MISUMI | MISUMI | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | KONISHI | KONISHI | KONISHI | KONISHI |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 10 Day(s) or more | Same day or more | 16 Day(s) or more | Same day or more | Same day or more | 8 Day(s) or more | Same day or more | Same day or more | Same day or more | 10 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 8 Day(s) or more | 16 Day(s) or more | Same day or more | 11 Day(s) or more | Same day or more | Same day or more | 16 Day(s) or more | Same day or more | Same day or more | Same day or more | 11 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Application | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp / Operation | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Operation | Clamp | Operation | Clamp | Operation | Clamp | Clamp | Clamp | Clamp | Operation | Operation | Operation | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp |
| Shape | L Shape | L Shape | L Shape | L Shape | L Shape | Knobbed Shape | L Shape | L Shape | L Shape | L Shape | L Shape | Knobbed Shape | L Shape | L Shape | L Shape | T Shape | L Shape | L Shape | L Shape | Knobbed Shape / Knobless | L Shape | L Shape | Y Shape | L Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | L Shape | Knobbed Shape | Knobbed Shape | T Shape | L Shape | L Shape | Knobbed Shape | Knobbed Shape | Knobbed Shape | L Shape | Knobbed Shape | Knobbed Shape | L Shape | L Shape | L Shape | L Shape | Knobbed Shape |
| Mounting Section Dia. d (mm) or Nominal Dia. | 4 ～ 8 | M5 ～ M16 | 4 ～ 12 | M4 ～ M16 | 4 ～ 12 | 8 ～ 16 | 4 ～ 12 | 5 ～ 10 | 3 ～ 12 | 3 ～ 16 | M4 ～ M10 | 10 ～ 16 | M6 ～ M12 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | M6 ～ M10 | M3 ～ M5 | M8 ～ M16 | 4 ～ 12 | 4 ～ 16 | 4 ～ 6 | 4 ～ 6 | 10 ～ 16 | 10 ～ 16 | 8 ～ 16 | 10 | 3 ～ 12 | 10 | 10 ～ 20 | 3 ～ 12 | 3 ～ 6 | 3 ～ 6 | M6 ～ M14 | 8 ～ 10 | 8 ～ 16 | M4 ～ M16 | M10 ～ M20 | 8 ～ 12 | 12 ～ M36 | 4 ～ 16 | 4 ～ 10 | 4 ～ 16 | 8 ～ 20 |
| Type, Clamp | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Ratchet Mechanism | Clamp Mechanism | Clamp Mechanism | Cam Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism / Ratchet Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | - | Clamp Mechanism | - | Clamp Mechanism | - | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | - | - | - | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism / Cam Mechanism | Ratchet Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism |
| Mounting Section Type | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded | Threaded / Tapped | Threaded | Threaded | Threaded / Tapped | Threaded / Tapped / Round Bore | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded | Threaded / Tapped | Threaded | Threaded | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded | Threaded | Threaded | Round Bore | Threaded / Tapped | Threaded | Threaded / Tapped | Round Bore | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Round Bore | Round Bore | Round Bore | Threaded / Tapped | Threaded / Tapped | Round Bore | Tapped / Round Bore / Square Bore | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped | Threaded / Tapped |
| Rotating Radius R(mm) | 30 ～ 42 | 40 ～ 110 | 45 ～ 92 | 40 ～ 110 | 48 ～ 92 | 100 ～ 150 | 48 ～ 92 | 55 ～ 68 | 45 ～ 92 | 45 ～ 108 | 40 ～ 100 | 87 ～ 128 | 40 ～ 95 | 45 ～ 63 | 45 | 25 | 30 | 60 ～ 90 | 30 | 102 ～ 148 | 42 ～ 92 | 30 ～ 110 | 45 | 44 | 93 | 123.5 ～ 187.5 | 100 ～ 150 | 109 | 45 ～ 78 | 84 ～ 106 | 81 ～ 136 | 26 ～ 46.5 | 30 | 30 | 67 ～ 140 | 81 ～ 127 | 80 ～ 180 | 44 ～ 95 | 87 ～ 128 | 104 ～ 146 | 150 ～ 400 | 45 ～ 115 | 45 ～ 85 | 40 ～ 110 | 65 ～ 130 |
| Main Body Material | Zinc Alloy | Zinc Alloy | Nylon | Zinc Alloy | Nylon | Steel | Nylon | Zinc Alloy | Nylon | Zinc Alloy | Steel | Steel | Zinc Alloy | Zinc Alloy | Zinc Alloy | Zinc Alloy | Nylon | Steel | Zinc Alloy | Steel | Polyamide | Zinc Alloy | Zinc Alloy | Nylon | Steel | Steel | Steel | Steel | Zinc Alloy | Steel | Steel | Nylon | Nylon | Zinc Alloy | Polyamide | Polyamide | Steel | Polyamide | Steel | Steel | Steel | Zinc Alloy | Zinc Alloy | Zinc Alloy | Steel |
| L-Shaped Clamp Lever Shape | - | Set Screw Type | - | Set Screw Type | - | - | Push Button Type | Set Screw Type | Set Screw Type | Set Screw Type | Set Screw Type / No Set Screw Type | - | Set Screw Type | Push Button Type | - | - | - | Set Screw Type | Set Screw Type | - | Set Screw Type | Set Screw Type | - | - | - | - | - | - | Set Screw Type | - | - | - | Set Screw Type | Set Screw Type | - | - | - | Set Screw Type | - | - | - | Set Screw Type | Set Screw Type | Set Screw Type | No Set Screw Type |
| Mounting Section, Length L(mm) | 7 ～ 32 | 10 ～ 90 | 8 ～ 50 | 10 ～ 60 | 12 ～ 50 | 30 ～ 63 | 12 ～ 50 | 16 ～ 50 | 6 ～ 80 | 6 ～ 80 | 20 ～ 50 | 30 ～ 60 | 10 ～ 50 | 7 ～ 40 | 12 ～ 32 | 7 ～ 32 | 12 ～ 40 | 15 ～ 40 | 10 ～ 50 | 30 ～ 60 | 9 ～ 63 | 9 ～ 80 | 12 ～ 32 | 12 ～ 32 | 30 ～ 60 | 15.5 ～ 19.5 | 18 ～ 60 | 11 | 6 ～ 80 | 15 ～ 19 | 23 ～ 80 | 6 ～ 80 | 6 ～ 50 | 6 ～ 50 | - | - | - | 12 ～ 80 | 30 ～ 80 | - | - | 9 ～ 80 | 9 ～ 80 | 9 ～ 80 | 10 ～ 63 |
| Knobbed Lever Shape | - | - | - | - | - | Ball Knob | - | - | - | - | - | Ball Knob | - | - | - | - | - | - | - | Ball Knob | - | - | - | - | Ball Knob | Ball Knob | Ball Knob | Ball Knob | - | Single Lever | Ball Knob | - | - | - | Single Lever | Single Lever | Single Lever | - | Ball Knob | Ball Knob | - | - | - | - | Ball Knob |
| Operation Direction | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Vertical | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Vertical | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal |
| Type, Operation | - | - | - | - | - | - | - | - | - | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Provided | - | Latching Mechanism | - | Not Provided | - | - | - | - | Not Provided | Not Provided | Not Provided | - | - | - | - | - | - | - | - |
| Main Body, Surface Treatment | Baked Coating | Coating | - | Coating | - | Black Oxide | - | Electrostatic Coating | None | Powder Coating | Black Oxide | Powder Coating | Coating | Electrostatic Coating | Electrostatic Coating | Electrostatic Coating | - | Coating | Coating | Black Oxide | None | Electrostatic Coating | Baked Coating | - | None | Black Oxide | Black Oxide | Black Oxide | Powder Coating | Black Oxide | Black Oxide | None | None | Powder Coating | None | None | Black Oxide | None | Powder Coating | Black Oxide | Black Oxide | Electrostatic Coating | Electrostatic Coating | Electrostatic Coating | Black Oxide |
| Mounting Section, Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Mounting Section, Surface Treatment | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide |
| Knob Material | - | - | - | - | - | Phenol | - | - | - | - | - | Phenol | - | - | - | - | - | - | - | Phenol | - | - | - | - | Phenol | Phenol | Phenol | Phenol | - | Phenol | Phenol | - | - | - | - | Phenol | Phenol | - | Phenol | Phenol | - | - | - | - | Phenol |
| Knob Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | None | - | - | - | - | - | - | - | None | - | - | - | - | - | None | None | None | - | None | None | - | - | - | - | None | None | - | None | None | - | - | - | - | None |
| Gap Adjustment Screw | - | None | - | - | - | - | - | - | None | None | None | - | - | - | - | - | - | None | None | - | None | None | - | - | - | - | - | - | None | - | - | - | None | None | - | - | - | - | - | - | - | None | None | None | None |
Loading...
Configure
Specification/Dimensions
-
Application
- Clamp
- Operation
- Related Components
-
Shape
-
Mounting Section Dia. d (mm) or Nominal Dia.
-
Type, Clamp
-
Mounting Section Type
- Threaded
- Tapped
- Round Bore
- Square Bore
-
Rotating Radius R(mm)
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Others
-
L-Shaped Clamp Lever Shape
-
Mounting Section, Length L(mm)
-
Knobbed Lever Shape
-
Operation Direction
-
Type, Operation
-
Main Body, Surface Treatment
-
Mounting Section, Material
-
Mounting Section, Surface Treatment
-
Knob Material
-
Knob Surface Treatment
-
Gap Adjustment Screw
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Lever
-
- Catches
- Door Stays
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Lighting System
- Gas Springs
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hanging Tools
- Extrusion Kits and Mesh Fences
- Handle
- Knob Screws
- Lever
- Rotation Handles, Crank Handles
- Hanger Hooks
- Shelves, Shelf Supports, Shelf Poles
- Door Wheels
- Handles
- Hinges
- DIY Supplies
-
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy