(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Dowel Pins, Spring Pins, Stepped Pins（Material：Steel）
Standards are stipulated in JIS, and products designed according to both the new and old JIS standards are available. MISUMI offers products of both standards, so note the difference in tolerance.
Besides the dowel pin, MISUMI offers abundant shapes such as spring pin and stepped pin, as well as sizes from 0.1 to 30 mm and length from 2 to 200 mm. [Materials] > Stainless steel, iron (steel), resin
[Nominal Diameter] > 0.1 to 30 mm
Shape
-
Straight / Dual-Fit Dowel -
Tapered -
Stepped -
Plastic (Insulation) -
Spring Pins -
Specialized Tools
-
![Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390350/110302390350_001.jpg?$product_view_b$)
Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]
MISUMI
Positive Tolerance Type Dowel Pins.
- Volume Discount
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
[Features]This grippy pin can be used for simple fastening and positioning.
- Volume Discount
Special Price Days to Ship: Same day or more -
S45C-Q Taper Pin With Internal Thread【1-40 Pieces Per Package】
HIMENO PRECISION
[Features]Hardening taper pin with positive tolerance internal thread. [Materials]S45C
Days to Ship: Same day or more -
![Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390260/110302390260_001.jpg?$product_view_b$)
Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]
MISUMI
Positive Tolerance Type Dowel Pins.
- Volume Discount
Days to Ship: Same day or more -
Parallel Pin B Type【1-1,000 Pieces Per Package】
HIMENO PRECISION
An h7 (minus) tolerance dowel pin. Metric diameters up to 25 mm and lengths up to 150 mm are available on the web.
- Volume Discount
Days to Ship: 11 Day(s) or more -
Dowel Pin With Inside Threads, E Type (With Straight Groove)
OHKITA
Dowel pin with internal thread that has a straight air release groove.
Days to Ship: 8 Day(s) or more -
Spring Pin, Wave Type, for General Use【100-5,000 Pieces Per Package】
TAIYO STAINLESS SPRING
It has less product entanglement compared to the straight type, and is suitable for automatic insertion.
In addition, it has long extended dimensions, with superior circularity and drawing load capacities.Days to Ship: 12 Day(s) or more -
OHKITA
Inch size dowel pin.
Material = SCM445 Equivalent; Hardness = HRC58 to 62
Diametric Tolerance: +0.0001 to +0.0003 (Millimeters: +0.0025 to +0.0076)
Parallel pin type developed for positioning when assembling molds, jigs, etc.
Uses tough chromium molybdenum steel, allowing security with thrust loads as well.
Surface hardness has been increased and been given an even smoother finish to avoid galling while driving in.Days to Ship: 8 Day(s) or more -
Parallel Pin A Type【1-50 Pieces Per Package】
HIMENO PRECISION
M6 (positive tolerance) parallel pins. On Web, items whose M diameter and length are up to 16 and 100mm, respectively, are available.
Days to Ship: 16 Day(s) or more -
Stepped Dowel Pins - Standard with Tapped Hole
MISUMI
Dual-Fit Dowel Pins with different dimension tolerances provided for both ends.
- Volume Discount
Days to Ship: Same day or more -
Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6
MISUMI
[Features]A dowel with over tolerance. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】
OCHIAI
[Features]
· Cylindrically coiled thin plate with a slit. When inserted (by press fit) into a hole with a diameter slightly smaller than that of its outer diameter, the pin applies internal pressure to the hole (force due to its expansion), preventing it from dropping out from the hole.
· This hollow pin contributes to weight reduction when compared with solid pins.
· Used for positioning, turn prevention, and retention, etc.
· Used for simple fastening and positioning, etc.
· Its grip prevents it from dropping out from its mating hole.
· When it is necessary to increase the shear load, use a double-pin structure. (The load is made by adding the shear load on the outer and inner pins.)- Volume Discount
Special Price Days to Ship: Same day or more -
Taper Pin【1-1,000 Pieces Per Package】
HIMENO PRECISION
A headless pin with a circular cross section and a side taper of 1/50.
- Volume Discount
Days to Ship: 9 Day(s) or more -
- On Sale Till 31/03/2025
Dual Fit Dowel Pins - p6-h7 p6-g6
MISUMI
[Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0
MISUMI
Positive Tolerance Type Dowel Pins.
- Volume Discount
Special Price Days to Ship: Same day or more -
Dowel Pin With Internal Thread THMDP
HIMENO PRECISION
[Features]Dowel pin with internal thread. [Shape]Straight / Stepped,Parallel; Material: Steel
Days to Ship: 9 Day(s) or more -
OHKITA
Standard Okita knock pin developed for used in positioning of molds, jigs, etc.
Days to Ship: 8 Day(s) or more -
Spring Pin Straight Type【1-1,000 Pieces Per Package】
HIMENO PRECISION
Simple dowel pin requiring only drilled hole and requiring no reaming.
Days to Ship: 14 Day(s) or more -
- On Sale Till 31/03/2025
Dual Fit Dowel Pins - Hollow, Tapped
MISUMI
[Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Special Price Days to Ship: Same day or more -
Tapered Pin With Inner Screw【1-100 Pieces Per Package】
OHKITA
[Features]Easy to insert via internal thread. [Shape]Can choose from taper; material: S45C and SUS303.
Days to Ship: Same day or more -
S45C Taper Pin【1-1,000 Pieces Per Package】
OHKITA
[Features]Positive tolerance taper pin with 1/50 taper used for positioning, etc.
Days to Ship: 8 Day(s) or more -
OHKITA
Standard Okita knock pin developed for used in positioning of molds, jigs, etc.
Days to Ship: 8 Day(s) or more -
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.Days to Ship: 9 Day(s) or more -
General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6
MISUMI
[Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Days to Ship: 16 Day(s) or more -
Spring Pin【16-182 Pieces Per Package】
TRUSCO NAKAYAMA
- A simplified dowel pin that does not require high accuracy from its mating flat hole.
- The outward force of a spring keeps pieces in place. (Diameter of applicable hole is the same as its nominal diameter.)Days to Ship: Same day or more -
General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6
MISUMI
[Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2/SUS304/SUS440C.
- Volume Discount
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Dowel Pin With Inside Threads, A Type (With Spiral Grooved)
OHKITA
Dowel pin with internal thread that has a spiral air release groove.
Special Price Days to Ship: Same day or more -
Taper Pin With External Thread
OHKITA
Insertion and maintenance are simple, since outer screws are included.
Days to Ship: 8 Day(s) or more -
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.Days to Ship: 9 Day(s) or more -
S45C-Q Parallel Pin With Internal Thread h7【1-100 Pieces Per Package】
HIMENO PRECISION
[Features]
· A parallel pin with a minus tolerance (B-type h7) internal thread.
· Thermal refined.Days to Ship: 16 Day(s) or more -
S45C-Q Taper Pin【1-100 Pieces Per Package】
HIMENO PRECISION
Refined and heat treated. Pin with 1/50 taper on sides.
Days to Ship: 9 Day(s) or more -
Grooved Pin A Type【1-1,000 Pieces Per Package】
SUNCO
[Features]There is a groove gradually spread. [Material] Steel
Days to Ship: 8 Day(s) or more -
Parallel Pin With Internal Thread m6
OHKITA
Internal threading makes insertion easy.
The tolerance is m6.
Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.Days to Ship: 8 Day(s) or more -
Dowel Pin With Internal Thread TMMDP
HIMENO PRECISION
A dowel pin with an inner screw that complies with the Himeno standards (TMMDP).
Days to Ship: 9 Day(s) or more -
Dowel Pin DP/m6【1-100 Pieces Per Package】
HIMENO PRECISION
[Features]Dowel pin with positive tolerance. [Shape]Straight / Stepped Parallel; Material: SK4
Days to Ship: 9 Day(s) or more -
S45C-Q Parallel Pin With Internal Thread m6
HIMENO PRECISION
[Features]Hardening parallel pin with positive tolerance. [Shape]Straight/Parallel Joggling
Days to Ship: 16 Day(s) or more -
S45C-Q (Quenched) Parallel Pin B Type【1-10 Pieces Per Package】
HIMENO PRECISION
[Features]Hardening parallel pin with negative tolerance. [Shape]Straight/Parallel Joggling
- Volume Discount
Days to Ship: 9 Day(s) or more -
Dowel Pin DP/h7【1-1,000 Pieces Per Package】
HIMENO PRECISION
[Features]Dowel Pin Series with negative tolerance. [Shape]Straight / Stepped Parallel; Material: SK4
Days to Ship: 9 Day(s) or more -
OHKITA
Standard Okita knock pin developed for use in positioning of molds, jigs, etc.
Days to Ship: Same day or more -
Grooved Pin Type B【1-1,000 Pieces Per Package】
SUNCO
[Features]There is a groove gradually spread from center toward flange.
Days to Ship: 8 Day(s) or more -
Parallel Pin Type A【1-100 Pieces Per Package】
TAIYO STAINLESS SPRING
[Features]A type steel parallel pin with large external dimensions accuracy used for rotary shafts, hinges, etc.
Days to Ship: 15 Day(s) or more -
Parallel Pin With Internal Thread h7
OHKITA
Internal threading makes insertion easy.
The tolerance is h7.
Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.Days to Ship: 8 Day(s) or more -
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.
Material = A1 (Stainless Steel)Days to Ship: 9 Day(s) or more -
HIMENO PRECISION
Parallel pin of the old JIS m6 (plus tolerance). Has a round tip and a flat tip.
Days to Ship: 8 Day(s) or more -
Dowel Pin With Internal Thread TPMDP【1-50 Pieces Per Package】
HIMENO PRECISION
Insertion is simple, since inner screws are included.
Days to Ship: 9 Day(s) or more
![Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390350/110302390350_001.jpg?$product_view_b$)
![Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390260/110302390260_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Nominal Dia. |
| Shaft Dia. Tolerance |
| Length |
| Shape |
| End Shape |
| Outer Dia. (Max.)(mm) |
| Material |
| Properties |
| Outer Dia. (Min.)(mm) |
| Surface Treatment |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | HIMENO PRECISION | MISUMI | HIMENO PRECISION | OHKITA | TAIYO STAINLESS SPRING | OHKITA | HIMENO PRECISION | MISUMI | MISUMI | OCHIAI | HIMENO PRECISION | MISUMI | MISUMI | HIMENO PRECISION | OHKITA | HIMENO PRECISION | MISUMI | OHKITA | OHKITA | OHKITA | OHKITA | MISUMI | TRUSCO NAKAYAMA | MISUMI | OHKITA | OHKITA | OHKITA | HIMENO PRECISION | HIMENO PRECISION | SUNCO | OHKITA | HIMENO PRECISION | HIMENO PRECISION | HIMENO PRECISION | HIMENO PRECISION | HIMENO PRECISION | OHKITA | SUNCO | TAIYO STAINLESS SPRING | OHKITA | OHKITA | HIMENO PRECISION | HIMENO PRECISION |
| Product Series | Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog] | S45C-Q Taper Pin With Internal Thread【1-40 Pieces Per Package】 | Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog] | Dowel Pin With Inside Threads, E Type (With Straight Groove) | Spring Pin, Wave Type, for General Use【100-5,000 Pieces Per Package】 | Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6 | Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】 | Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0 | General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6 | General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6 | S45C-Q Parallel Pin With Internal Thread h7【1-100 Pieces Per Package】 | S45C-Q (Quenched) Parallel Pin B Type【1-10 Pieces Per Package】 | Dowel Pin With Internal Thread TPMDP【1-50 Pieces Per Package】 | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | Same day or more | Same day or more | Same day or more | 11 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 16 Day(s) or more | Same day or more | Same day or more | Same day or more | 9 Day(s) or more | Same day or more | Same day or more | 9 Day(s) or more | 8 Day(s) or more | 14 Day(s) or more | Same day or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 16 Day(s) or more | Same day or more | Same day or more | Same day or more | 8 Day(s) or more | 9 Day(s) or more | 16 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 16 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | Same day or more | 8 Day(s) or more | 15 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more |
| Nominal Dia. | 5 ～ 20 | 2 ～ 10 | 5 ～ 16 | 5 ～ 16 | 1 ～ 25 | 6 ～ 20 | 1 ～ 13 | 1/2 ～ 7/16 | 1 ～ 25 | 5 ～ 13 | 6 ～ 12 | 1 ～ 13 | 1 ～ 25 | 3 ～ 12 | 2 ～ 10 | 5 ～ 20 | 3 ～ 13 | 2 ～ 13 | 6 ～ 12 | 5 ～ 20 | 1 ～ 30 | 3 ～ 13 | 1.5 ～ 10 | 5 ～ 12 | 2 | 2 ～ 8 | 6 ～ 20 | 4 ～ 16 | 1.5 ～ 8 | 6 ～ 20 | 3 ～ 25 | 1.5 ～ 6 | 5 ～ 25 | 5 ～ 20 | 2 ～ 20 | 5 ～ 20 | 3 ～ 25 | 2 ～ 20 | 3 ～ 16 | 1.5 ～ 10 | 4 ～ 6 | 5 ～ 20 | 1.2 ～ 8 | 6 ～ 8 | 5 ～ 16 |
| Shaft Dia. Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Negative Tolerance | Negative Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | - | Negative Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | - | Negative Tolerance | Positive Tolerance | Positive Tolerance | - | Positive Tolerance | Positive Tolerance | Positive Tolerance | Negative Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | - | - | Positive Tolerance | Positive Tolerance |
| Length | 10 ～ 80 | 5 ～ 100 | 15 ～ 140 | 10 ～ 80 | 4 ～ 150 | 15 ～ 100 | 4 ～ 90 | 1 ～ 7/8 | 4 ～ 150 | 15 ～ 70 | 15 ～ 45 | 4 ～ 140 | 6 ～ 160 | 8 ～ 40 | 6 ～ 60 | 10 ～ 80 | 10 ～ 100 | 5 ～ 100 | 12 ～ 40 | 20 ～ 140 | 10 ～ 200 | 6 ～ 100 | 4 ～ 60 | 10 ～ 45 | 10 ～ 50 | 6 ～ 20 | 15 ～ 120 | 25 ～ 160 | 6 ～ 80 | 10 ～ 120 | 14 ～ 150 | 16 ～ 36 | 10 ～ 140 | 10 ～ 80 | 4 ～ 100 | 10 ～ 120 | 6 ～ 150 | 4 ～ 100 | 6 ～ 100 | 6 ～ 70 | 8 ～ 50 | 10 ～ 120 | 4 ～ 60 | 15 ～ 16 | 10 ～ 80 |
| Shape | Straight / Dual-Fit Dowel | Spring Pins | Tapered | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Spring Pins | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Stepped | Straight / Dual-Fit Dowel | Spring Pins | Tapered | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Spring Pins | Straight / Dual-Fit Dowel | Tapered | Tapered | Straight / Dual-Fit Dowel | - | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Tapered | - | - | Tapered | Spring Pins | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Spring Pins | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel |
| End Shape | Tapped | Standard | Tapped | Tapped | Standard | Tapped | Standard | Standard | Standard | Standard / Tapped | Tapped | Standard | Standard | Standard | Standard | Tapped | Standard | Standard | Tapped | Tapped | Standard | Standard | Standard | Tapped | Standard | Standard | Tapped | External Thread | Standard | Tapped | Standard | Standard | Tapped | Tapped | Standard | Tapped | Standard | Standard | Standard | Standard | Standard | Tapped | Standard | Standard | Tapped |
| Outer Dia. (Max.)(mm) | - | 2.25 ～ 10.6 | - | - | - | - | 1.2 ～ 13.7 | - | - | - | - | 1.2 ～ 13.7 | - | - | - | - | - | 2.25 ～ 13.7 | - | - | - | - | 1.6 ～ 10.45 | - | 2.25 ～ 6.4 | - | - | - | 1.6 ～ 8.4 | - | - | 1.6 ～ 6.35 | - | - | - | - | - | - | - | 1.63 ～ 10.4 | - | - | 1.25 ～ 8.3 | - | - |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Properties | - | Regular | - | - | - | Regular | Regular | Regular | - | - | - | Regular | - | - | - | - | Regular | Light Load | - | Regular | Regular | Regular | Regular | - | Regular | - | Regular | Regular | Regular | - | - | Regular | Regular | - | - | - | - | - | Regular | Regular | Regular | Regular | Regular | - | - |
| Outer Dia. (Min.)(mm) | - | 2.15 ～ 10.3 | - | - | - | - | 1.1 ～ 13.4 | - | - | - | - | 1.1 ～ 13.4 | - | - | - | - | - | 2.15 ～ 13.4 | - | - | - | - | - | - | 2.15 ～ 6.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | Not Provided | Not Provided | - | Not Provided | Not Provided | Tempered Collar | - | Not Provided | - | - | Phosphate Coating | Not Provided | - | - | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | - | - | Phosphate Coating | - | Not Provided | Not Provided | - | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | - | Not Provided | Not Provided |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. |
![Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110302390350/110302390350_001.jpg?$product_view_c$)
![Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110302390260/110302390260_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Nominal Dia.
-
Shaft Dia. Tolerance
- Positive Tolerance
- Negative Tolerance
-
Length
-
End Shape
-
Standard -
Tapped -
External Thread
-
-
Outer Dia. (Max.)(mm)
-
Material
-
Properties
-
Outer Dia. (Min.)(mm)
-
Surface Treatment
-
Sales Unit
Narrow search by specifying Manufacturer
-
- OHKITA (26)
- HIMENO PRECISION (20)
- SUNCO (6)
- TAIYO STAINLESS SPRING (5)
- TRUSCO NAKAYAMA (2)
- OCHIAI (1)
- ESCO (0)
- KS SANGYO (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 1 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
Related Categories to Dowel Pins, Spring Pins, Stepped Pins
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy