Cylinders with Guides（Rod Operation Method：Single-Rod）

• 

  Dual-Rod Cylinder, Basic Type CXS Series

  SMC

  Dual-Rod Cylinder, Basic Type CXS Series with guide function that is suitable for pick and place applications, etc.
  [Features]
  · Ball bushing bearings and slide bearings are standard for all series.
  · Can be mounted from 3 directions.
  · Workpieces can be mounted on 3 surfaces.
  · Air cushion only minimally adds to full length dimension.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Compact Guide Cylinder MGP Series

  SMC

  Compact cylinder with guide.
  [Features]
  · Shortened guide rod.
  · Saves space.
  · By reducing the guide rod length by a maximum 22 mm, the machining required to create space between the bottom of the cylinder body and the equipment is reduced.
  · Round auto switches and strong magnetic field resistant auto switches can be directly mounted without spacers.
  · 4 types of mounting are possible.
  · Piping from either direction.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Guide Rod Compact Cylinders MGC Series

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s)

• • On Sale Till 31/03/2025

  

  Cylinders with Twin Guides

  MISUMI

  Easy-to-use cylinder with guides on both ends. 2 types of guide rod bearings are available, sliding bearing and linear bushing bearing.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Compact Guide Cylinder With Air Cushion MGP Series

  SMC

  A space saving compact cylinder with guide.
  [Features]
  · The shortening of the guide rod and change to the thickness of the plate has reduced the product weight by up to 24%.
  · By reducing the guide rod length by as much as 22 mm, the amount of machining work required to create clearance between the bottom of the cylinder body and the equipment has been reduced.
  · Small auto switches and auto switches resistant to strong magnetic fields can be directly mounted on 2 sides.
  · 4 types of mounting are possible. Piping is possible from 2 directions.
  · With air cushion.

  Days to Ship:	20 Day(s) or more

• 

  Drive Device, Guided Jig Cylinder Series

  KOGANEI

  Installation and piping direction can be selected, square and thin body with greater freedom for designing equipment.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Cylinder twin rod cylinder B series with attached drive equipment guide.

  KOGANEI

  Flat, square shaped, compact design without guide, space efficient and low cost.

  Days to Ship:	14 Day(s) or more

• 

  [Inventory Items] Cylinder With Multifunction Guide STG Series

  CKD

  Weight reduction and resource saving have been achieved. In addition, the guide rod bearing has been improved, and the metal bearing material and bearing structure have been changed to achieve high lateral load resistance and stable operation.
  [Features]
  ・ Metal bearing material and bearing structure have been modified to achieve high lateral load resistance and stable operation.
  ・ Hex key is used to attach the piston rod. No special tools required for maintenance.
  ・ The aluminum body shape of the cylinder body has been reviewed to achieve weight reduction and resource saving.
  ・ Easy piping processing and improved visibility of the cylinder switch.
  [Applications]
  ・ Ideal for applications that require lateral load resistance.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  STS Series Cylinder With Multi-Function Guide

  CKD

  Rectangular, space saving cylinder in which the cylinder switch is integrally housed in the body and overall length of the cylinder is ultimately shortened. The body structure has been optimized for short strokes and long strokes, and guides are provided on both sides to achieve high accuracy, high stiffness, and space saving. There are many variations to suit various applications and environments such as lifters and pushers.
  [Features]
  ·With 2 guide rods that use plain bearings or roller bearings. High non-rotating accuracy and runout accuracy contribute to improving the accuracy of the equipment to be incorporated.
  ·Cylinder with 2 guide rods, high rigidity and strong lateral load.
  ·In addition to aluminum (standard), steel (optional) is available as the material for the end plate.
  ·With the guide rod, it is not necessary to install a separate detent mechanism, which contributes to the compactness of the built-in device.
  [Applications]
  ·Ideal for lifters, pushers, etc.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Dual Rod Cylinders TR Series

  AIRTAC

  JIS standard cylinder. Improvement in non-rotational accuracy, high functional guide function, lubrication free.
  
  [Features]
  · JIS standards implemented
  · Improvement in non-rotational accuracy, high precision guide function, lubrication free
  · Constant anti-lateral loading can be done.
  · Various types of installation formats are available.
  · With magnets and stroke adjustable

  CAD ：

  2D / 3D

  Days to Ship:	19 Day(s) or more

• 

  Dual-Rod Cylinder, Compact Type CXSJ Series

  SMC

  Dual-Rod Cylinder, Compact Type CXSJ Series that can be mounted from 3 directions.
  [Features]
  · Dual-rod cylinder with guide function that is suitable for pick and place applications, etc.
  · Ball bushing bearings and slide bearings are standard for all series.
  · Workpieces can be mounted on 3 surfaces.
  · Twice the thrust, non-rotating accuracy of ±0.1°.
  · Adjustable stroke range of 0 to -5 mm.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Super Twin Rod Cylinder With Hybrid Function, STR2 Series

  CKD

  It is a cylinder that can obtain non-rotating accuracy and twice the thrust of the cylinder due to the twin rod structure.
  There are a wide variety of options and variations in 6 types from ø6 to ø32.
  [Features]
  ·2 types of bearings are available, plain bearings (metal bearings) and roller bearings (bearings), depending on the application.
  ·2 single rod cylinders are fixed to the end plate in parallel. Achieves high non-rotating accuracy without the need for detent mechanism.
  ·A series of ultra-compact types with an inner diameter of ø6, ideal for transporting small accessories.
  ·Since the piping port can be installed on both the left and right sides, it is easy to process the piping according to the device.
  ·If you use the reamer hole for parallel pins, it is easy to reproduce and adjust when replacing the product during maintenance.
  [Applications]
  ·Ideal for transporting small accessories.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  [in-Stock Item] Cylinder with Guide, TCL TCM Series

  AIRTAC

  JIS standard. 2 types of bearing parts suitable to the application.
  
  [Features]
  JIS standard.
  Two types of bearing parts suitable to the application

  Days to Ship:	9 Day(s) or more

• 

  MLGP Series Low Profile Guide Cylinder With Lock

  SMC

  [Features]
  · All strokes can be stopped at any position
  Pressure drop and drop when exhausting residual pressure are prevented
  · Weight is reduced by up to 17% by shortening the guide rod and changing the plate thickness
  Guide rod shortened by up to 22 mm (Compared with conventional MLGPM)
  · Compact auto switch and magnetic field resistant auto switch can be directly mounted on 2 sides

  Days to Ship:	31 Day(s) or more

• 

  Compact Guide Cylinder MGQ Series

  SMC

  An air cylinder with integrated guide with lateral load resistance and high non-rotating accuracy.
  [Features]
  · Compact design that saves space.
  [Applications]
  · For conveyor line stoppers and lifters.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Miniature Guide Rod Cylinder MGJ Series

  SMC

  Miniature Guide Rod Cylinder MGJ Series with integral wiring/piping in one direction.
  [Features]
  · Can be mounted from 2 directions.
  · 2 auto switches can be mounted even for 5‑mm strokes.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  MLGC Series Compact External Guide Cylinder With Fine Lock

  SMC

  Fine lock cylinder with built-in lock mechanism and guide rod are integrated compactly.
  [Features]
  ・ New guide body reduces mass by 9%
  ・ It can be locked in both directions
  ・ Maximum piston speed: 500 mm/s
  ・ Air cushion is equipped as standard
  ・ Operating position can be detected

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  CUK Series Free Mount Cylinder, Non-Rotating Rod Type, Single Acting, Spring Return/Extend

  SMC

  Free mount series of compact air cylinders.
  [Features]
  · Non-rotating rod type.
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  · With auto switch.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Compact Guide Cylinder JMGP Series

  SMC

  [Features]
  · Compact with overall length reduced by 30.5 mm and height by 16 mm.
  · Weight is reduced by up to 69% (0.32 kg → 0.1 kg).
  · Can be mounted from 3 directions
    Top mounting, bottom mounting, base mounting.
  · Piping is possible from 4 directions.
  · Suitable for pushing, lifting and clamping on a transport line.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Cylinder With Multifunction Guide, STL Series

  CKD

  Highly precise, rigid and space saving cylinders enabled by attaching guides to both sides which can be used for applications such as lifters, pushers.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Cylinder with Multifunction Guide STG Series

  CKD

  More lightweight, resource saving, lateral load resistant and stable operating guided cylinder than conventional products.

  Days to Ship:	17 Day(s) or more

• 

  Guide Cylinder, Compact Type MGC Series

  SMC

  Basic cylinder with integrated guide rods.
  [Features]
  · Air cushion equipped as standard.
  · Lightweight and space saving.
  · Compact guide body and front plate.
  · Grease nipple equipped as standard to allow the bearings to be lubricated.
  · Available with or without rear plate.

  Days to Ship:	20 Day(s) or more

• 

  Slide Unit, Built-In Shock Absorber, Slide Bearing Type CXWM Series

  SMC

  A slide unit with built-in shock absorbers, Built-In Shock Absorber, Slide Bearing Type CXWM Series.
  [Features]
  · Dramatically reduces installation labor hours.
  · Provided with an end lock mechanism.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Compact Guided Cylinder, MGP Series, Guide Part With Lube-Retainer

  SMC

  [Features]
  ·Weight reduction of up to 24% by shortening the guide rod and changing the plate thickness
  · Lube-retainer (stable lubrication function) is attached to the guide part

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Guided Cylinder With Complex Function, STM Series

  CKD

  Super compact guided cylinder.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Driving Equipment High Multi-Cylinder

  KOGANEI

  Mounted directly without mounting hardware, slim shape with embedded sensor switch.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Drive Device, Guided Twin Rod Cylinder B Series, Double Acting Type

  KOGANEI

  Flat, square shaped, compact design without guide, space efficient and low cost.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  TCL/TCM Series Cylinder With Guide

  AIRTAC

  JIS standard cylinder. Two types of bearing parts suitable to the purpose.
  
  [Features]
  · JIS standards implemented
  · Two types of bearing parts suitable to the purpose

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Compact Cylinder TACQ Series (Guide Lock Type)

  AIRTAC

  JIS standard compliant, double guide rod type structure.
  C clip is adopted to connect the cylinder body and back or front cover, piston and piston rod are rivet structure to make it compact and reliable.
  The internal diameter of the cylinder is treated with grinding process forming abrasion resistance and durability.
  Longer the guide distance of the front cover, better the guide performance.
  Compact structure effectively saving installation space.
  The magnetic switch slots around the cylinder body enable convenient installation of sensor switch.
  Dual guide rod non rotating structure withstands bending and twisting and enables to bear large working load and lateral load.
  

  Days to Ship:	16 Day(s) or more

• 

  Guide Table MGF Series

  SMC

  A low-profile compact air cylinder.
  [Features]
  · A compact type cylinder with a large diameter guide and excellent eccentric load resistance.
  · Low-profile cylinder enables more compact machine design.
  · An internal non-rotating guide pin prevents rotation of the top plate.
  · T-slots are provided on 3 faces (except the port face) to allow the mounting of various brackets. (Not suitable for mounting the cylinder itself.)
  · Auto switches can be mounted on 4 lateral surfaces of the body.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  CXT Series Platform Cylinder

  SMC

  The CXT Series Platform Cylinder integrates a slide table with an actuator.
  [Features]
  · A slide table with high rigidity and high precision.
  · Adjustment bolt with bumper is equipped as standard.
  · Allows for auto switches to be mounted.
  · Can be mounted on 2 sides (top and bottom).

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  CXS Series Dual-Rod Cylinder With Rear End Lock

  SMC

  CXS Series Dual-Rod Cylinder With Rear End Lock can mount workpieces from 3 directions.
  [Features]
  ·2-rod cylinder suitable for picks and places with a guide function
  ·Standardization of all series ball bushing bearings and plain bearings
  ·Workpieces can be mounted from 3 sides
  ・ Double thrust, non-rotating accuracy ±0.1°
  ·Adjustable stroke range 0 to -5 mm

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  HYG Series Hygienic Design Cylinder

  SMC

  HYG Series Hygienic Design Cylinder with an easy-to-clean format.
  [Features]
  · Air cylinder with improved water resistance.
  · To keep the product flat, grooves for auto switches and holes for cushion needles, etc. have been eliminated.
  · Approximately 5 times increase in lifespan (compared to manufacturer's current models).
  · Able to handle food grease (NSF-H1 certified).
  · NBR or FKM can be selected as the external sealant material.
  · Mounting part: ISO standard (VDMA) compliant (HYC).

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  MLGP Series Low Profile Guide Cylinder With Lock

  SMC

  MLGP Series Low Profile Guide Cylinder With Lock can hold the clamped state.
  [Features]
  · Prevents drops for press fitting jigs, etc.
  · Drop protection for lifter.
  · Locking position can be changed to accommodate external stopper positions and thickness of clamped workpieces.
  · Simple and reliable locking system.
  · Easy manual unlocking.
  · 4 types of mounting are possible.
  · 2 types of guide rod bearing parts suitable for different applications.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Compact Guide Cylinder, MGP Series Improved Water Resistance Type

  SMC

  [Features]
  ・ Possible to use in environments exposed to water and coolant.
  ・ With improved water resistance 2-color display type auto switch.
  ・ Machine tools, food machines, car wash machines, etc.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Dual Rod Cylinder With Stable Lubrication Function (Lube-Retainer), CXS Series

  SMC

  [Features]
  · Durability is improved by forming a grease film on the surface of the piston rod
  · Prevents powder and contaminants from entering
  · The number of operations can be improved even in a general environment

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Compact Guided Cylinder, MGP Series, With Flange

  SMC

  [Features]·This is a type with a flange added to the plate side of the MGP series low profile cylinder with a guide.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Space-Saving Small size Compact Cylinder, MSDG Series

  CKD

  Small diameter series of super compact cylinder.

  Days to Ship:	23 Day(s) or more

• 

  Super Compact Cylinder With Multifunction Guide SSG Series

  CKD

  A guide rod and plate are provided in the super compact cylinders.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  Jig cylinder series with a drive equipment slow speed cylinder guide

  KOGANEI

  Low speed enabled, square & thin body allows selection of mounting and piping direction, offering greater flexibility of device design.

  Days to Ship:	18 Day(s) or more

• 

  Cylinder Axis Cylinder Series with Drive Equipment Guide

  KOGANEI

  A new innovation of a square cylinder with a guide, born from the pursuit of cost-effectiveness and ease of use.
  [Features]
  ·Non-rotating accuracy is 3 grades according to the structure of the guide part: standard type ±0.3 or less, bearing type ±0.1 or less, long bearing type ±0.05 or less
  ·With 5 types of cylinder diameters from ø16 to ø40, you can select the accuracy according to the application, and you can build a pneumatic drive system with extremely high cost-effectiveness
  ·The guides on both sides integrated with the cylinder are compact and lightweight
  ·Moreover, the stiffness is sufficient. The main body with a sophisticated design with few protrusions supports various mounting methods
  ·Piping and wiring are also integrated, and its design offers easy installation, adjustment, and maintenance
  ·Equipped as standard with a sensor indicator that allows the operating point of the sensor switch to be confirmed from the outside and a magnet for the sensor switch
  ·The compact sensor switch can be installed neatly and without protrusions, and adjustment is easy
  ·The compact shock absorber unit with the same design as the main body has a newly designed compact built-in shock absorber. 1 can be attached to each of the standard (single rod) cylinders on both sides of the guide rod
  ·Absorbs impact by utilizing the flow resistance of oil when the piston stops at the stroke end
  [Applications]
  ·Production line pushers, lifters, stoppers, presses, etc.

  Days to Ship:	16 Day(s) or more

• 

  B series cylinder with attached alpha series twin rod and drive equipment guide.

  KOGANEI

  Guide not required with 2 rod structure. Linear ball bearings are used for bearing parts.

  Days to Ship:	14 Day(s) or more

• 

  Twin rod cylinder TDA series with drive unit guide.

  KOGANEI

  An original non-rotating cylinder that integrates 2 cylinders compactly.
  [Features]
  ·Square style, compact design that does not require a guide, and direct mount make it effective for downsizing mechanical devices
  ·Non-rotating accuracy is ±0.45° and thrust is twice that of conventional cylinders
  ·Significantly reduces the design cost of non-rotating devices, the number of parts, etc.
  [Applications]
  ・ Compatible with pneumatic equipment and production lines in all industries

  Days to Ship:	14 Day(s) or more

• 

  Compact Guide Cylinder, Heavy Duty Guide Rod Type MGPS Series

  SMC

  A heavy duty guide rod type compact cylinder with guide that has improved load capacity.
  [Features]
  · Saves space.
  · Heavy duty guide rod type.
  · By reducing the guide rod length by as much as 22 mm, the amount of machining work required to create clearance between the bottom of the cylinder body and the equipment has been reduced.
  · Bearing type: slide bearing.
  · Inner diameter: 50 mm, 80 mm.

  Days to Ship:	20 Day(s)

• 

  Dual-Rod Cylinder With Air Cushion, CXS Series

  SMC

  Dual-Rod Cylinder With Air Cushion CXS Series that can be mounted from 3 directions.
  [Features]
  · Dual-rod cylinder with guide function that is suitable for pick and place applications, etc.
  · Ball bushing bearings and slide bearings are standard for all series.
  · Workpieces can be mounted on 3 surfaces.
  · Twice the thrust, non-rotating accuracy of ±0.1°.
  · Adjustable stroke range of 0 to -5 mm.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

Loading...