Regulators, Pressure Boosting Valves（Control Side, Connection Dia.：1/2）

• • Recommendation

  

  MiSUMi Economy

  Compact Regulators

  MISUMI

  Original pressure stabilization mechanism for precise and stable pressure regulation.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• • Recommendation

  

  MiSUMi Economy

  Air Filter Regulators

  MISUMI

  High filtration accuracy for precise and stable pressure regulation.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Electro-Pneumatic Regulator ITV1000/2000/3000 Series

  SMC

  Electro-Pneumatic Regulator ITV1000/2000/3000 Series with 2 possible directions of cable entry.
  [Features]
  · Stepless control of air pressure in proportion to an electric signal.
  · Sensitivity: 0.2 kPa (100 kPa specification).
  · Linearity: within ±1% (F.S.)
  · Hysteresis: within 0.5% (F.S.)
  · Protective structure: IP65.
  · 2 possible directions of cable entry.
  · Grease-free specification (ITV1000 Series).

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Regulator (With Backflow Function) AR20(K)-B To AR60(K)-B Series

  SMC

  SMC Regulator (With Backflow Function) AR20(K)-B To AR60(K)-B Series.
  [Features]
  · Specifications with a backflow function feature an inbuilt mechanism for quickly exhausting the air-pressure at the outlet side.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Regulator AR10-A to AR40-A

  SMC

  SMC Regulator AR10-A to AR40-A.
  [Features]
  · Energy saving regulator.
  · Pressure drop amount: Improved by up to 50%.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Precision Regulator IR1000-A/2000-A/3000-A Series

  SMC

  The Precision Regulator IR1000-A/2000-A/3000-A Series boasts a high flow rate of approximately 2 times the previous series (at maximum).
  [Features]
  · Air consumption reduced by up to 90% (approx.)
  · Lightweight type with approximately 27% weight reduction.
  · Sensitivity: 0.2% (full span).
  · Repeatability: ±0.5% (full span).

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Power Valve: Regulator Valve VEX1 Series

  SMC

  The Power Valve: Regulator Valve VEX1 Series is a large capacity relief type regulator valve.
  [Features]
  · Wide range of sizes available.
  · Connection port size: 1/8 to 2.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Pilot-Operated Regulator AR425 to 935 Series

  SMC

  [Features]·This is a relief type regulator using an internal pilot method.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Power Valve: Precision Regulator VEX1□3 Series

  SMC

  A precision regulator from SMC.
  [Features]
  · A high precision, large capacity relief regulator.
  · A poppet-type, 3-port, large exhaust capacity regulator valve with nozzle flapper mechanism. Available as an air-operated or manual handle type.
  · Excellent pressure setting precision. Having a relief capacity equivalent to the supply capacity allows the regulator to respond quickly and set a precise secondary (outlet) pressure, even when the secondary (outlet) volume and the pressure fluctuations are large.
  · High precision.
  · Minimizes pressure fluctuations with its large-volume supply and exhaust capabilities, making it well suited to balancer applications. In addition it features high precision F.S. (full span) sensitivity within 0.2% and F.S. repeatability of within ±0.5%.
  · Manifold capable. VVEXB: 1/8 - up to 10 stations, VVEX2: 1/4 - up to 8 stations
  · Series with large product lineup. Port diameters available from M5 to 2 inches, ensuring that most flow rates and pipes can be accommodated.
  [VEX1A33/VEX1B33]
  · Minimum size.
  · Non-grease specification.
  · Available with sealing materials of NBR or FKM.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Regulator Rechargeable Battery Compatible, 25A-AR20 to 60-B With Reverse Flow Function 25A-AR20K to 60K-B

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
  This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.

  Days to Ship:	15 Day(s)

• 

  Direct-Operated Precision Regulator, Modular Type (With Backflow Function), ARP20(K) To ARP40(K) Series

  SMC

  Direct-Operated Precision Regulator, Modular Type (With Backflow Function) with sensitivity within 0.2% F.S.
  [Features]
  · Repeatability: Within ±1% F.S. (or within ±3 kPa).
  · Energy saving and air consumption reduced by 80%.
  · Type with the backflow function (ARP20K/30K/40K) can be installed between solenoid valves and cylinders.
  · Specifications with a backflow function feature an inbuilt mechanism for quickly and reliable exhausting the air-pressure at the outlet side.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Regulator With Built-In Pressure Gauge ARG20/30/40

  SMC

  Regulator With Built-In Pressure Gauge ARG20/30/40 allows for one-touch installation and removal of the pressure gauge cover.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  · Pressure gauge anti-rotation mechanism.
  · Panel-cut for pressure gauge not necessary.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  AMR3000-6000 Series MR Unit (Regulator With Mist Separator)

  SMC

  MR Unit (Regulator with Mist Separator) that integrates a mist separator and regulator.
  [Features]
  · Filtration: 0.3 μm.
  · Helps save on space, and requires less piping.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Clean Regulator SRH Series

  SMC

  SRH Series Clean Regulator with a pulsation suppression valve design.
  [Features]
  · Contamination-controlled stainless steel regulator.
  · Oil-free parts assembly.
  · Select between a PTFE (grade A) or fluororubber (grade B) diaphragm depending on the application.
  · Designed with an intake/exhaust port in the diaphragm compartment, facilitating flow.
  · Constructed with valve springs partitioned off by the diaphragm.
  · Pulsation-suppressing valve structure.
  · Cleaned, assembled, and inspected in a Class 100 environment and then packaged and sealed in double bags.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Regulator Clean/Low Dust Generation 10/20/21-AR-B Reverse Flow Function 10/20/21-AR□K-B

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.
  
  [21-Series, Copper-Free / Fluorine-Free / Silicone -Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials.
  ・ The structure is the same as the Clean Series (grease and packaging form differ from the Clean Series. )

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Electro-Pneumatic Proportional Valve VEF/VEP Series

  SMC

  [Electro-pneumatic proportional valve: Flow rate type (VEF)]
  The flow rate is controlled steplessly by the magnitude of the current. You can select a model that suits your purpose according to specifications such as the number of ports (2 or 3-port valve with the electric throttle valve function) and the maximum effective cross-sectional area
  [Electro-pneumatic proportional valve: Pressure type (VEP)]
  The pressure is controlled steplessly by the magnitude of the electric current. In addition, because the structure has the same fully open effective cross-sectional area on the exhaust side, it has a large exhaust capacity and can also be used as a relief valve (3-port valve with the electric pressure reducing valve function)

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Regulator with Pressure Gauge

  TRUSCO NAKAYAMA

  [Features]
  · Regulates for stable air pressure.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Regulator With Built-In Pressure Gauge With Backflow Function ARG20K, 30K, 40K

  SMC

  SMC's ARG20K, 30K, 40K Regulator With Built-In Pressure Gauge With Backflow Function.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · Built-in function to reliably exhaust air pressure from the outlet side to the inlet side.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  IR1200-A/2200-A/3200-A Series Regulator

  SMC

  IR1200-A/2200-A/3200-A Series high-flow-rate regulator that handles up to about twice the flow rate of conventional products.
  [Features]
  · Air consumption: 0 bleed air.
  · Lightweight type with approximately 27% weight reduction.
  · Repeatability: ±1% (full span).

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Electro-Pneumatic E-P HYREG VY1 Series

  SMC

  The Electro-Pneumatic E-P HYREG VY1 Series is a hybrid regulator combining a regulator and a solenoid valve.
  [Features]
  · Stepless controls via electric signals.
  · Simple circuit configuration.
  · Easy to handle.
  · Manifold capable.
  [Applications]
  · Cylinder thrust control.
  · Drive and thrust control.
  · Flow control of various fluids / Pressure control of tanks / Air flow control for nozzles.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Electro-Pneumatic Regulator Compatible With Rechargeable Batteries 25A-ITV1000/2000/3000 Series

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process. (excluding cables)
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
  This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.

  Days to Ship:	15 Day(s) or more

• 

  5 Port Electro-Pneumatic Proportional Valve VER2000/4000

  SMC

  [Features]
  ・ Stepless control of cylinder drive and pressure with 1 unit
  ・ Applicable cylinder: ø25～ø125
  ・ Exhaust throttle and B port decompression possible

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Direct Acting Precision Regulator 10/20/21-ARP20 to 40·10/20/21-ARP20 to 40K

  SMC

  [10-Series Cleanroom Compatible]
  ・ Supports a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-Series, Copper / Fluorine Not Compatible]
  ・ Suitable for use in environments that dislike copper and fluorine materials.
  ・ External dimensions are the same as standard products.
  
  [21-Series, Cleanroom Compatible, Copper/Fluorine/Silicone Not Compatible]
  ・ Supports environments with restrictions on copper-based, fluorine-based, and silicone-based materials.
  ・ The structure is the same as the clean series (Grease and packaging are different from the clean series. )

  Days to Ship:	15 Day(s) or more

Loading...