Silencers（Pipe Connection Port Type：R）

• • Recommendation

  

  MiSUMi Economy

  Silencer Sintered Copper, Short

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• • Recommendation

  

  MiSUMi Economy

  Silencer Sintered Copper, Standard

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Silencer, Compact Resin Type/Male Thread, AN05 To 40 Series

  SMC

  [Features]
  · Compact and lightweight.
  · Noise reduction effect of 30 dB (A).
  · Body size: 05/10/15/20/30/40.
  · Thread type: M thread / R (no name) / NPT (N).

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• • On Sale Till 31/03/2025

  

  Silencer

  MISUMI

  [Features]·2 types are available, resin (ABS resin) and metal (brass).

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  5.0‑MPa Silencer, VCHN Series

  SMC

  Silencer made by SMC.
  [Features]
  · Noise reduction effect of 35 dB (A)
  · Reduced clogging by 1/10 (in-house comparison).
  · Relief valve built-in standard
  · Enhanced maintainability
  · 30 to 40% freezing reduction effect (option)

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Silencer, Resin Body Type, SLW Series

  CKD

  Noise cancellation effect of more than 30db
  
  [Features]
  · Silencer.
  · Small diameter type.
  · Resin body type.
  · Noise cancellation effect of more than 30db[A].

  • STOCK

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Silencer, Metal Body Type, AN□00 Series

  SMC

  Silencer with a noise reduction effect of 30 dB (A).
  [Features]
  ・ Small ventilation resistor
  ・ Easy To Mount
  ・ Body size: 500／600／700／800／900
  ・ Thread type: N (unsigned)/NPT (R)

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Silencer, Metal Case Type, 25 Series

  SMC

  The 25 Series Metal Case Type Silencer prevents the spread of mist and sound from exhaust.
  [Features]
  · Exhaust is emitted in the axial direction only.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  40 dB (A) High Noise Reduction Silencer, ANA1 Series

  SMC

  [Features]
  · High noise reduction silencer that achieves 85 dB (A) or lower when tested in our factory.
  · Fluid: compressed air.
  · Maximum operating pressure: 1.0 MPa (*Shows the primary-side pressure of the solenoid valve).
  · Noise reduction effect: 40 dB (A) (*May change depending on the air pressure circuit, pressure, etc., from which the exhaust is emitted).
  · Ambient temperature and operating fluid temperature: 5 to 60°C.
  *Can be used at between -10 to +60°C as long as there is no risk of water drops being generated from the fluid and freezing.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Silencer: BC Sintered Body Type, AN Series

  SMC

  [Features]
  · Silencer suitable for the exhaust of compact valves and pilot air.
  · Surface treatment: Ni plating.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Silencer: High Noise Reduction Type, AN□02 Series

  SMC

  Silencer with a noise reduction effect of 35 dB (A).
  [Features]
  · Flame-retardant material is used for the case.
  · Body sizes: 202/302/402.
  · Thread type: R (no name) / NPT (N).

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Silencer for Convum MS Series

  MYOUTOKU

  Convum only silencer that is a light weight type with direct mounting

  Days to Ship:	16 Day(s) or more

• 

  38 dB (A) High Noise Reduction Silencer, ANB1 Series

  SMC

  Silencer usable for the collective exhaust of manifolds, etc.
  [Features]
  · The ANB1 series is now available, which has the same connection port diameter as the ANA1 series and a large effective cross-sectional area.
  · Fluid: compressed air.
  · Maximum operating pressure: 1.0 MPa (*Shows the primary-side pressure of the solenoid valve).
  · Noise reduction effect: 38 dB (A) (*Noise reduction effects may change depending on the air pressure circuit, pressure, etc., from which the exhaust is emitted).
  · Ambient temperature and operating fluid temperature: 5 to 60°C.
  *Can be used at between -10 to +60°C as long as there is no risk of water drops being generated from the fluid and freezing.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Silencer, Large Flow Rate/Small Bore/Resin Body Type, SLW-L Series

  CKD

  Same size with 1.5 times more flow *This series is undergoing revision of the CAD data. Please wait till the corrections are done.

  Days to Ship:	8 Day(s) or more

• 

  Silencer, High Sound Damping / Compact Type, SLW-S Series

  CKD

  [Features]·This is a compact and lightweight silencer. ·The sound damping effect is 25 dB "A" or more.

  CAD ：

  3D

  Days to Ship:	8 Day(s) or more

• • Economy

  

  Silencer SLCP

  CHELIC

  This is a threaded type silencer. Connection threads can be selected from R1/8 to 1/2. A small jig cylinder made in Taiwan in 1988 by a specialized manufacturer of pneumatic equipment and parts. Sales have expanded world-wide and the company has gained a high reputation globally.

  CAD ：

  3D

  Days to Ship:	8 Day(s) or more

• 

  Silencer, SL Series

  CKD

  Exchangeable elements. Separate disposal. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  • STOCK

  CAD ：

  2D / 3D

  Days to Ship:	1 Day(s) or more

• 

  High Sound Damping / Small Bore / Resin Body Type Silencer, SLW-H Series

  CKD

  High noise canceling effect greater than 40db *This series is undergoing revision of the CAD data. Please wait till the corrections are done.

  Days to Ship:	16 Day(s) or more

• 

  Metering valve with silencer, SMW2 series

  CKD

  Small, light weight and high flow. Push lock style. All plastic materials. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Small, light weight and high flow: Compared to the traditional series, it achieves 50% decrease in volume and 80% decrease in mass, which is drastically smaller and lighter weight, as well as having the largest effective base area of the class.
  · More than 23dB(A) of noise cancellation effect. The noise cancellation effect is increased by integrating a P sintered body element with the body.
  · Adopted a push lock type needle.
  · A knob with a push lock style is adopted to securely lock the needle with one touch.
  · Environmental design: No need to separate it when disposed, as all plastic materials are used.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Metering Valve With Silencer, SMW Series

  CKD

  [Features]·The metering valve with a silencer is a product that integrates a silencer and a throttle valve.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Speakon muffler SM1 series

  TAIYO

  [Features]
  · Integrated noise silencer and control valve.
  · Exhaust flow rate can be controlled 0 ~ 100%.
  
  [Use]
  · Can be used for speed control of actuator and noise silencer of exhaust sound.

  Days to Ship:	1 Day(s)

• 

  Plug Silencer, PSA Series

  TAIYO

  Suitable to decrease the exhaust sound of pneumatic equipment

  Days to Ship:	8 Day(s) or more

• 

  SilencerCSB Type

  CHIYODA

  Excellent strength and corrosion resistance, and suitable for use in high temperatures.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Silencer CSB-TV Type

  CHIYODA

  [Features]
  · Compact design made of brass

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Silencer, CSE Type

  CHIYODA

  Plastic silencer.
  
  [Features]
  · Has wide range of variation and you can select the size and material.
  · This brass type has excellent strength and corrosion resistance, and is suitable for use in high temperatures.
  · Brass breather vent type prevents dust and dirt penetration in the air.
  · The stainless steel type can be used as a filter for water and chemicals.
  · The resin type is small and light weight type with a high flow design (CSN-H type)

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Plastic Silencers BN-2606

  NIHON SEIKI

  [Features]
  · Light weight type silencer

  Days to Ship:	16 Day(s) or more

• 

  Silencer, BN-26 Series

  NIHON SEIKI

  A metal silencer.
  [Features]
  · Made of metal, giving it excellent strength.
  [Applications]
  · Sound damping when discharging compressed air.

  Days to Ship:	16 Day(s) or more

• 

  General-Purpose Silencer [EBSL]

  EASUN

  This is a silencer. You can select from M5, G1/8, G1/4, G3/8, G1/2 and G3/4. Please note that this product is sold in lots. (Ex: minimum order quantity of 50) This is from a Chinese pneumatic equipment related products manufacturer established in 1986. They obtained ISO9001 in 1996 and have won high evaluations for their stable quality.

  CAD ：

  3D

  Days to Ship:	16 Day(s) or more

• • Economy

  

  Silencer SLC

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  Days to Ship:	16 Day(s) or more

• • Economy

  

  Silencer SLCB

  CHELIC

  This is a low profile threaded type silencer. Connection threads can be selected from R1/8 to R1/2. A small jig cylinder made in Taiwan in 1988 by a specialized manufacturer of pneumatic equipment and parts. Sales have expanded world-wide and the company has gained a high reputation globally.

  Days to Ship:	16 Day(s) or more

• 

  Silencer (for air)

  TRUSCO NAKAYAMA

  Features
  · This is a noise silencer that is light weight and affordable by adopting resin for the body material.
  · Suitable to eliminate air exhaust noise.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Silencer SA3 Series

  TAIYO

  [Features]
  · Suitable to decrease the exhaust sound of pneumatic components.
  · Light weight and affordable by adopting resin in the body.

  Days to Ship:	16 Day(s) or more

• 

  SFE Series Exhaust Filter For Clean Room

  SMC

  Exhaust cleaner that enables direct exhaust of air in a clean room by simply attaching it to the air equipment in the clean room.
  [Features]
  · Enables direct exhaust of air in a clean room (cleanliness class 4: ISO14644-1).
  · No need for piping for exhaust air and relief air.
  · Reduces piping installation work and space.
  · Noise reduction: 30 dB (A) or more.
  · RoHS compliant.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s)

Loading...