Electromagnetic Valves（Plumbing Thread Nominal：1 1/2）

• 

  PS-22 Type, Solenoid Valve (for Steam, Liquid, Air) MOMOTARO II

  VENN

  Production equipment, construction equipment etc. piston type employing SSS & AAS
  
  [Features]
  · Service durability one million cycles cleared: Nominal diameter 25 or less.
  · Applied for steam, water, air, and oil.
  · Applicable under pressure ranging from 0 to 0MPa.
  · Can be mounted flat or upright (nominal diameter 50 or less).
  · A thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 25 or less)

  Days to Ship:	16 Day(s) or more

• 

  Process Valve, 2 Port Valve For Flow Control VNB Series

  SMC

  A 2 port valve for flow control made by SMC.
  [Features]
  · Wide variety of applicable fluids
  · Cylinder actuation by external pilot air
  · Wide variations

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Bronze Ball Valve With 10K Pneumatic Actuator

  KITZ

  Type C (double-acting)
  [Features]
  ・ The actuator body is made of die-cast aluminum alloy, and the drive unit has a double piston structure, achieving a compact size and weight reduction.
  ・ Consisting of minimal components, extremely unlikely to fail, and durable
  ・ A dedicated solenoid valve that can be directly attached to the actuator is available, so piping work is easy
  ・ Rack-and-pinion structure with double piston is a highly efficient 90 degree rotary actuator
  ・ The valve body and actuator can be directly connected with just 2 bolts

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Ball Valve With 10K Pneumatic Actuator

  KITZ

  [Features]
  ・ The actuator body is made of die-cast aluminum alloy, and the drive unit has a double piston structure, achieving a compact size and weight reduction.
  ・ Consisting of minimal components, extremely unlikely to fail, and durable
  ・ A dedicated solenoid valve that can be directly attached to the actuator is available, so piping work is easy
  ・ Rack-and-pinion structure with double piston is a highly efficient 90 degree rotary actuator
  ・ The valve body and actuator can be directly connected with just 2 bolts

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Coolant Valve SGC Series, External Pilot Solenoid Valve, Air Operated Type

  SMC

  [Features]
  · Prevents vibrations to the shaft sliding part, increasing the lifespan of rubber parts. It also helps improve the valve sealing performance.
  · Completely stops the leakage of coolant fluid. The scraper effect provides double the safety performance.
  · The sealing material can also be selected (NBR, FKM).
  · Includes a function for checking whether the valve is open or closed. Mountable on either side (SGC2/3/4 only).
  · Prevents the loss of grease, increasing its service life.
  · External pilot solenoid type and air operated type.
  · Series: SGC200/SGC300SGC400.
  · Valve type: N.C./N.O.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  2-Port Solenoid Valve for Dust Collector, VXF2 Series

  SMC

  It is a 2 port solenoid valve for dust collector VXF2 Series.
  [Features]
  ・ Suitable for high temperature and large diameter
  ・ It can be mounted according to piping conditions (Flange Type)
  ・ It contributes to reduction of piping labor-hours, because there is no need to process orifice on the secondary (Flange body type)
  ・ Protective structure IP65 (Electrical entry flat terminal type terminal section is IP40)
  · Improved armature durability
  · UL94V-0 conforming flame resistance
  ・ Built-in full-wave rectifier type (AC specification)

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Aluminum XJ (SCS14A/EPDM) /Butterfly Valve

  KITZ

  B type (Double Action)
  Equipped with a low-speed opening/closing actuator for butterfly valves, high output torque, and self-locking function.
  [Features]
  ·Employs an internal planetary gear reducer
  ・ Stepless adjustment limit cam dry contact switch is set as standard
  ・ With interlock switch

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Process Valve, 2 Port Valve For Compressed Air And Air-Hydro Circuit Control VNA Series

  SMC

  A 2 port valve for compressed air and air-hydro circuit control made by SMC.
  [Features]
  · A universal 2 port valve exclusively for controlling air pressure systems and air-hydro circuits
  · Cylinder actuation by external pilot air
  · Balance poppet type that allows normal and reverse flow
  · Can be operated at 0 MPa
  · Wide variations

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Solenoid Valve DP-100 Series

  YOSHITAKE

  Can be used with different fluids including steam, cold water, air, nitrogen and argon gas. Has cleared more than 600,000 opening/closing operations.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  PS-25 Type Solenoid Valve (for Steam, Liquids and Air) Stainless Steel Momotaro II

  VENN

  [Features]
  · The stainless steel, threaded PS-25 type series and flange type PF-25 type series, solenoid valves Momotaro II has all the favorable features and same face to face dimensions as the earlier PS-15, and PF-15 type series for ease of replacement during repair, with the added benefit of greater durability.

  Days to Ship:	12 Day(s) or more

• 

  Pilot Operated 2 Port Solenoid Valve VXP21/22/23 Series

  SMC

  [Features]
  ・ An abundant variety of combinations. A wide range of fluids can be controlled
  ・ Disassembly and assembly can be done in a short time
  ・ Selection of threaded or flange mounting is possible.

  Days to Ship:	15 Day(s) or more

• 

  Air Operated 2 Port Valve, Cylinder Valve SAB*W Series

  CKD

  Cylinder-driven air-operated valve with a wide range of sizes from the connection port diameter of Rc1/4 to 50 flanges. Compatible with water, air, steam, and low vacuum, and solenoid valve mounted type is also available.
  [Features]
  ·Cylinder drive system with external pilot air is resistant to contaminants and ensures reliable opening and closing.
  ·The lineup includes the series for water, air, low vacuum, and steam. Each series offers optional body and seal materials that make the products compatible with a wider range of fluids.
  ·The actuator section can be changed in 4 directions, making piping and wiring work easy.
  [Application]
  ·Ideal for controlling water and non-corrosive liquids.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Water Hammer Relief, Pilot Operated 2 Port Solenoid Valve VXR21/22/23 Series

  SMC

  SMC Solenoid Valve.
  [Features]
  · Water hammer is alleviated.
  · Easy to disassemble and reassemble in a short time.

  Days to Ship:	15 Day(s) or more

• 

  Coolant Valve, Air Operated / External Pilot Solenoid VNC Series

  SMC

  A coolant valve made by SMC.
  [Features]
  · Cylinder actuation by pilot air
  · Wide selection of port sizes and variations
  · Low water hammer
  · Large valve capacity

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Moderate / High Pressure Air Operated Type 3- Port Valve (Coolant Valve)

  CKD

  Coolant valve with 2/3 ports offers assured operation with the cylinder driving system. The metal sealing employed protects against intrusion of foreign matter.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Air Operated 2-Port Valve, Cylinder Valve, SAB*A Series

  CKD

  Air-operated 2-port valve.
  [Features]
  · NC (normally closed) type, NO (normally open) type, double acting type
  · Connection port diameter: Rc1/4 to Rc2, 32 to 50 flange
  · Operating fluid: Air, gas
  [Application]
  · Ideal for air and gas fluid control.
  · Can also be used in an explosion-proof atmosphere.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Air Operated 2 Port Cylinder Valve SAB*S Series

  CKD

  Air-operated 2-port valve.
  [Features]
  · NC (normally closed) type, NO (normally open) type, double acting type
  · Connection port diameter: Rc1/4 to Rc2, 32 to 50 flange
  · Operating fluid: For steam, water, air
  [Application]
  · Ideal for controlling steam, water, air and non-corrosive liquids.
  · Can also be used in an explosion-proof atmosphere.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Explosion-Proof Pilot Two-Port Solenoid Valve, AD21E4/AD22E4 Series

  CKD

  Explosion-proof valves were developed using the reliable and high quality Multilex valve as the base, for automatizing and saving-time in dangerous areas, based on "Respect of human life and Maintaining company activities."

  CAD ：

  2D

  Days to Ship:	38 Day(s) or more

• 

  Steam Valve, 2 Port Valve For Steam VND Series

  SMC

  A valve made by SMC.
  [Features]
  · Use of a PTFE seal makes it suitable for steam.
  · Large valve capacity.
  · Wide variations.
  · With indicator (option)
  · Cylinder operated by external pilot air.
  · With PTFE seal.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Operated 3-Port Valve, Solenoid Valve Mounted Type, NVP11 Series

  CKD

  Air operated 3-port valve, solenoid valve mounted type, NVP11 series.
  [Features]
  ・ Universal type
  ・ Connection port size: Rc3/8 to Rc2

  CAD ：

  2D / 3D

  Days to Ship:	22 Day(s) or more

• 

  WS-22/22N Type Solenoid Valve (for Liquid and Gas) Momotaro II

  VENN

  Production equipment construction equipment etc. Diaphragm system employing SSS & AAS
  
  [Features]
  · Thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 50 or less).
  · Can be mounted horizontal or vertically (nominal diameter 50 or less).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Suitable for liquids and gases.
  · Triple the durability compared to conventional products (nominal diameter less than 50).
  · The threaded type WS-22 type series solenoid valve Momotaro II combines all the favorable features and same face to face dimensions of the earlier WS-12 series for replacement ease during repair while offering the added benefit of greater durability.

  Days to Ship:	18 Day(s) or more

• 

  PS-22C Type Solenoid Valve (for Steam, Liquid, and Air) with Strainer Momotaro II

  VENN

  Production equipment construction equipment etc. Piston system employing SSS & AAS

  Days to Ship:	18 Day(s) or more

• 

  5 Port Air Operated Valve VPA4□50/4□70 Series

  SMC

  An air operated valve made by SMC.
  [Features]
  · Manifolds that are the same as for VP4□50 series are available.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s)

• 

  Air operated type 2 port valve Solenoid valve type SVB *W series

  CKD

  Cylinder valves are air operated valves using a cylinder driving system with external pilot air. It is suitable for various fluids such as water, air, gas, low-vacuum, steam.

  CAD ：

  2D

  Days to Ship:	21 Day(s) or more

• 

  Air operated type 2-port valve solenoid valve type SVB *S series

  CKD

  Cylinder valves are air operated valves using a cylinder driving system with external pilot air. It is suitable for various fluids such as water, air, gas, low-vacuum, steam.

  CAD ：

  2D

  Days to Ship:	21 Day(s) or more

• 

  Low Pressure Air Operated 2-Port Valve (Coolant Valve)

  CKD

  An air-operated valve that specializes in controlling coolant in machine tools and is resistant to contaminants.
  [Features]
  ·The cast iron body and metal seal structure (excluding 10 A) reduce wear and damage to the seal area and makes it resistant to contaminants.
  ·Supports a wide range of pressures.
  ·Applicable to various types of connection port diameters from Rc3/8 to 80 flanges.
  ·The lineup includes the module connection manifold type, realizing space saving of coolant piping and reduction of labor-hours.
  [Application]
  ·Ideal for coolant control.

  CAD ：

  2D / 3D

  Days to Ship:	22 Day(s) or more

• 

  Explosion-Proof Pilot Two-Port Solenoid Valve, AP21E2/AP22E2 Series

  CKD

  Explosion-proof valves were developed using the reliable and high quality Multilex valve as the base, for automatizing and saving-time in dangerous areas, based on "Respect of human life and Maintaining company activities."

  CAD ：

  2D

  Days to Ship:	63 Day(s) or more

• 

  Solenoid Valve DP-100-C Series

  YOSHITAKE

  [Features]
  · Applicable with steam, cold water, air as well as a variety of other media including nitrogen gas, carbon dioxide (in dry state), argon gas and oil (20cSt or less).
  · 600,000 or above opening/closing operations cleared.
  · The "ANTI STICKING MECHANISM" employed on the valve sliding part makes prevents scaling 3 times more than the conventional models.
  · The stainless steel body including the main internal components makes it stainless and more durable.
  · Employs cartridge type components, making maintenance drastically easier.
  · Uses PTFE (fluoropolymer) gaskets for improved airtightness.
  · Can be used within a wide range of temperature from 0 to 1.0MPa. (When coil is horizontal, 0.03 to 1.0MPa)
  · Can be mounted horizontally or vertically (however, when coil is upward, less than 90°).

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Solenoid Valve DP-200/DP-200-N Series

  YOSHITAKE

  Water hammer shock reduction and shortening the valve closure time are achieved. No leakage from valve seat as the valve is made of synthetic rubber.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  WS-25 Type Solenoid Valve (for Liquid and Gas) Stainless Steel Momotaro II

  VENN

  [Features]
  · Stainless steel threaded type WS-25 type series, flange type WF-25 type series solenoid valve Momotaro has the same features and face to face dimensions as the earlier WS-15 type series achieving ease of replacement during repair, with the added benefit of improved durability than the WF-15 type series.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontally or vertically.
  · Thermo-setting resin highly resistant to heat is used on the coil exterior

  Days to Ship:	12 Day(s) or more

• 

  PS-16 PF-16 Type Solenoid Valve (for Water) Stainless Steel Momotaro

  VENN

  [Features]
  · Applied with high pressure fluids.
  · Uses stainless steel for high pressure water and steam.

  Days to Ship:	12 Day(s) or more

• 

  PS-17, PF-17 Type Solenoid Valve (for Steam) Stainless Steel Momotaro

  VENN

  [Features]
  · Applied with high pressure fluids.
  · Uses stainless steel for high pressure water and steam.

  Days to Ship:	12 Day(s) or more

• 

  WS-18 Type Rust Proof Solenoid Valve

  VENN

  Equipped with a water hammer sensitive mechanism, the diaphragm type valve structure is suitable in water lines.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable under pressure ranging from 0.02 to 0MPa.
  · Compact and lightweight pilot type solenoid valve

  Days to Ship:	12 Day(s) or more

• 

  PS-18 Type Rust Proof Solenoid Valve

  VENN

  The built-in tube end core in this solenoid valve prevent rusty water (straight type only).
  This piston system has a pilot operated valve, used for a variety of fluids including oil and exhibiting high durability.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · A highly reliable and durable special piston ring is employed in the valve.
  · Applicable with pressure ranging from 0.02 to 1.0MPa.
  · Compact and lightweight pilot type solenoid valve.

  Days to Ship:	12 Day(s) or more

• 

  WSE-18 Type Pressure-Resistant Explosion Proof Type Solenoid Valve

  VENN

  Equipped with a water hammer sensitive mechanism, the diaphragm type valve structure is suitable in water and gas lines.
  
  [Features]
  · Applicable in explosive and hazardous areas.
  · Equipped with a manual override for ease in testing or actuation during power failure.
  · The direction of conduit tube threads can be changed to make installation or wiring easy.
  · Tube end core can be installed in straight type for preventing rust occurrence

  Days to Ship:	12 Day(s) or more

• 

  PSE-18 Type Pressure-Resistant Explosion Proof Type Solenoid Valve

  VENN

  [Features]
  · Applicable in explosive and hazardous areas.
  · Equipped with a manual override for ease in testing or actuation during power failure.
  · The direction of conduit tube threads can be changed to make installation or wiring easy.
  · Tube end core can be installed in straight type for preventing rust occurrence.
  · Used where there is danger of explosion from explosive gas.
  · Pilot operated piston system used for a variety of fluids including oil with superior durability.

  Days to Ship:	12 Day(s) or more

• 

  3 Port Air Operated Valve VPA3145/3165/3185 Series

  SMC

  Air operated valve with large valve capacity and small exhaust resistance.

  Days to Ship:	31 Day(s)

• 

  2 Port Air Operated Valve for Dust Collector VXFA2 Series

  SMC

  This is a 2 Port Air Operated Valve for Dust Collectors, VXFA2 Series.
  [Features]
  ・ It can be used in high temperature and for large diameter
  ・ It can be mounted according to piping conditions (Flange type)
  ・ Contribution to reduction of piping labor hours, because there is no need to machine orifices on the outlet side (flange body type)
  ・ Protective structure IP65 (The terminal section of the flat terminal type for lead entry is IP40.)
  · Improved armature durability
  · UL94V-0 conforming flame resistance
  ・ Built-in full-wave rectifier type (AC specifications)

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  ATEX Directive 2-Port Valve for Steam, Steam Valve 56-VND Series

  SMC

  [What is ATEX Directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the traditional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of electrostatic charge
  ・ Ignition prevention of sparks caused by friction, impact, and abrasion
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone/Category
  In ATEX, the objects to be applied are classified into categories for each dangerous place (zone).
  ・ Zone 0: Category 1
  Possibility of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Possibility of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Possibility of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  Air-Operated 3-Port Valve for Medium to High Pressure, CVE/CVE3 Series

  CKD

  A 3-port air-operated valve that specializes in controlling coolant in machine tools and is resistant to contaminants.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

Loading...