Drain Traps, Steam Traps（Nominal Diameter：25A）

• 

  AK-1H Type Steam Trap

  VENN

  [Features]
  · General-purpose drain trap for pipelines and headers etc. Each of the mechanisms are attached to the cover for easy maintenance.
  · A simple internal valve structure for easy maintenance.
  · Features a built-in strainer.
  · However, for the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap inlet.

  Days to Ship:	8 Day(s) or more

• 

  A3N/AF3N disk/steam trap/up to 1.6 MPaG A3N

  TLV

  [Features]
  ·The steam heating condensate cooling type double lid structure reduces steam loss through reliable operation.
  ·The built-in bimetal type automatic blow-off mechanism shortens start-up time.
  ·Wear parts such as valves and valve seats can be replaced as a unit.
  [Applications]
  ·General purpose applications that do not require temperature control.
  ·Steam main pipe, high temperature tracing, insulation (jacket), tank heating for insulation, etc.

  Days to Ship:	11 Day(s) or more

• 

  Drainage Separator, DS-1/2 Series

  YOSHITAKE

  The drainage is efficiently separated using the centrifugal force generated by the channeling of steam and air.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  BA-5 Type, Drain Separator

  VENN

  Main/Branch pipes all equipment inlets, etc.
  
  [Features]
  · Separates water droplets and condensate (drainage) generated in the steam and air pipes.
  · Improved dryness in the steam lines enables a stabilized heat supply and increases heating efficiency.
  · Reduces steam hammering as caused by initial steam ventilation drainage build-up.
  · More stable when the regulator valve is operating and reduces corrosion and wear.
  · Reduces the generation of rust inside pipes by eliminating water droplets.

  Days to Ship:	12 Day(s) or more

• 

  BELL-MIGHTY Steam Trap, ES5/E5/8N/8B/10/12N Type

  MIYAWAKI

  [Features]
  ・ Double air-water separation (U-shaped passage of lift fitting structure and function of downward bucket) ensures air-water separation, and no steam entrapment leakage, etc.
  ・ Since the water is discharged intermittently or continuously depending on the amount of condensed water generated, there is no accumulation of condensed water on the primary side
  ・ Ideal almighty setting for various applications such as equipment, steam main pipes, etc.
  [Applications]
  ・ Plant industry
  ・ Food manufacturing
  ・ Cleaning, air conditioning, etc.

  Days to Ship:	22 Day(s) or more

• 

  BELL-MIGHTY Steam Trap, ER105/110/116/120/25 Type

  MIYAWAKI

  [Features]
  ・ Double air-water separation (U-shaped passage of lift fitting structure and downward bucket function) ensures air-water separation, and there is no steam entrapment leakage, etc.
  ・ Since the water is discharged intermittently or continuously depending on the amount of condensed water generated, there is no accumulation of condensed water on the primary side
  ・ It is an almighty design ideal for machinery equipment
  [Applications]
  ・ Machinery/equipment
  ・ Insulation
  ・ Heating / air conditioning

  Days to Ship:	22 Day(s) or more

• 

  Disc Type Steam Trap, S55 Type

  MIYAWAKI

  [Features]
  ・ Improvement of energy saving: It achieved valve closing below the steam saturation temperature, significantly reducing steam entrainment and leakage
  ・ Improved durability: Further improved durability of the valve seat (SUS)
  ・ Lightweight and miniaturization: The manufacturer is aiming to reduce costs through a lightweight and compact design
  ・ It uses an automatic blow-off mechanism: The interior bimetal smoothly discharges the air and low-temperature condensate at the beginning of ventilation
  [Applications]
  ・ High temperature / high pressure steam main pipe
  ・ Equipment

  Days to Ship:	13 Day(s) or more

• 

  Steam Traps, TD-10NA/30NA Series

  YOSHITAKE

  The use of bimetal eliminates air obstructions. Cold water and air are simultaneously discharged during start-up, providing an efficient start-up for steam equipment.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  AK-16 Type Steam Trap

  VENN

  Sleek design with excellent corrosion resistance, durability. For small machinery/equipment and clean steam lines etc.
  
  [Features]
  · Utilizes an SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer.
  · However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.
  · A stainless steel small capacity (MAX 1.6MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.

  Days to Ship:	12 Day(s) or more

• 

  AK-5F Type Steam Trap

  VENN

  Small capacity (MAX 2.0MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.
  
  [Features]
  · Utilizes SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer. However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.

  Days to Ship:	12 Day(s) or more

• 

  A3N/AF3N disk/steam trap/up to 1.6 MPaG AF3N

  TLV

  [Features]
  ·The steam heating condensate cooling type double lid structure reduces steam loss through reliable operation.
  ·The built-in bimetal type automatic blow-off mechanism shortens start-up time.
  ·Wear parts such as valves and valve seats can be replaced as a unit.
  [Applications]
  ·General purpose applications that do not require temperature control.
  ·Steam main pipe, high temperature tracing, insulation (jacket), tank heating for insulation, etc.

  Days to Ship:	11 Day(s) or more

• 

  Disc Type Steam Trap, SU2N/SU2H Type

  MIYAWAKI

  [Features]
  ・ The automatic blow-off mechanism significantly speeds up the startup time. Smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ No restrictions on mounting orientation
  ・ Face to face can be made to order
  [Applications]
  ・ Steam transport pipe
  ・ Steam trace

  Days to Ship:	22 Day(s) or more

• 

  Separator, H3 Type

  MIYAWAKI

  [Features]
  ·It separates and removes water droplets generated in steam pipes and condensate flowing to the bottom of pipes, and supplies high-quality dry steam.
  ·By adopting a baffle system (impingement type), the air-water separation capacity does not decrease even if the load fluctuates.
  ·The compact design makes it easy to systematize with pressure reducing valves and steam wraps.
  ·It can also be used as an air separator.
  [Applications]
  ·Steam and water separation for steam and air piping.

  Days to Ship:	22 Day(s) or more

• 

  Separator, H5 Type

  MIYAWAKI

  [Features]
  ·It separates and removes water droplets generated in steam pipes and condensate flowing in the bottom, and supplies high-quality dry steam.
  ·The tornado method (centrifugal separation method) is used to maintain the air-water separation ability even if the load fluctuates.
  ·The compact design makes it easy to systematize with pressure reducing valves and steam traps.
  ·It can also be used as an air separator.

  Days to Ship:	14 Day(s) or more

• 

  Steam Traps, TSD-7/7F Series

  YOSHITAKE

  [Features]
  · Features four functions: STOP/BY-PASS/TRAP/TEST. These functions can be easily switched between.
  · Also available with an optional handle specified and authorized by the manufacturer.
  · Features a built-in bypass function which significantly reduces piping and construction costs.
  · The use of bimetal eliminates air obstructions. Cold water and air are simultaneously discharged during start-up, providing an efficient start-up for steam equipment.
  · Unaffected by back pressure. Allows for the trap to be checked.
  · The stainless steel disc and valve have been specially heat-treated for superior durability.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  ATB-5 Type Steam Trap with Bypass (Triple Function)

  VENN

  An integrated compact structure incorporating three functions. In addition to functioning as a thermostatic type trap, it can also be used as a bypass circuit, and a stop valve.
  Effective for better utilization of space and for reducing equipment costs.
  
  [Features]
  · Boasts a large discharge capacity and so can be used for everything from pipe ends to large-type equipment.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.
  Note: Types with nominal diameters of 32 to 50 operate at a temperature 15°C lower.
  · For types with a nominal diameter of 32 to 50, the adoption of a movable valve body provides excellent sealing performance and durability.
  · The test valve can be directly mounted to the trap.

  Days to Ship:	16 Day(s) or more

• 

  BH-1 Type Silencer

  VENN

  Reduces noise when the drain discharges.
  
  [Features]
  · Piping can be connected to the outlet, helping guide the drainage to a safe location.
  · The internal silencing material uses Venn's own proprietary filling material, ensuring minimal back-pressure load on the steam trap while simultaneously giving excellent noise canceling effects.

  Days to Ship:	12 Day(s) or more

• 

  AK-5 Type Steam Trap

  VENN

  Small capacity (MAX 2.0MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.
  
  [Features]
  · Utilizes SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer. However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.

  Days to Ship:	12 Day(s) or more

• 

  AK-21 Type Air Trap

  VENN

  Pipe ends, receiver tanks, and drainage separators, etc.
  
  [Features]
  · A simple structure for easy maintenance.
  · A structure that is strong against contamination and scale.
  · Structured so that drainage can easily flow-in. As such, no pressure-equalizing pipe needs be installed.

  Days to Ship:	12 Day(s) or more

• 

  Disc Type Air Trap, AV Type

  MIYAWAKI

  [Features]
  ・ Bypass piping can be omitted and it is cost-effective
  ・ By operating the handle to open the blow valve, scale and oil can be easily removed even during operation
  ・ With ideal on and off operation, condensate is discharged quickly.
  ・ Maintenance can be done easily by unitizing the main parts
  [Applications]
  ・ Suitable for air piping, after-cooler, receiver tank, etc.

  Days to Ship:	22 Day(s) or more

• 

  Disc Type Air Trap, S31N Type

  MIYAWAKI

  [Features]
  ・ The automatic blow-off mechanism significantly speeds up the startup time. Smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ No restrictions on mounting orientation
  ・ Unit replacement of main parts is possible
  [Applications]
  ・ Food and cleaning equipment
  ・ Steam transport pipe
  ・ General equipment such as heat exchangers

  Days to Ship:	17 Day(s) or more

• 

  Combined Disc Type Steam Trap and Bypass Valve, SV1 Type

  MIYAWAKI

  [Features]
  ・ A bypass circuit is formed inside the trap with a single handle operation due to the interior of the blow valve
  ・ By omitting bypass piping, piping material costs and labor costs can be reduced. Also, the construction period can be significantly shortened
  ・ The main part of the trap (cap, disc, seat) is unitized, and the newly designed cartridge can be easily replaced, so maintenance can be performed in a very short time
  ・ The main part of the trap is designed to keep warm by using the re-evaporated steam of condensate of drainage water, so there is no blanking of the disc and it has excellent durability
  [Applications]
  ・ Ideal for cleaning equipment, food equipment, dyeing equipment, etc.

  Days to Ship:	13 Day(s) or more

• 

  Ball Float Steam Trap, G20 Type

  MIYAWAKI

  [Features]
  ・ Ideal for steam process line: Since the valve opening is adjusted according to the amount of condensate generated, the condensate is continuously discharged without being accumulated on the primary side
  ・ Shorter rise time: The air at the initial stage of ventilation and low-temperature condensate are automatically discharged. In addition, the diaphragm type air vent that follows the saturation temperature also deals with air and vapor obstacles
  ・ Energy saving design: High-precision polishing float and 3 point support mechanism realizes high sealing performance and suppresses steam loss even in the case of extremely small amount of condensate
  ・ It supports condensate recovery: It has a high back pressure tolerance and can be used for condensate recovery
  [Applications]
  ・ Food equipment, cleaning equipment, air conditioning equipment, etc.

  Days to Ship:	22 Day(s) or more

• 

  Disc Type Steam Trap, SC31 Type

  MIYAWAKI

  [Features]
  ・ Stainless Steel: Parts other than bimetal and gasket are made of stainless steel and have excellent durability
  ・ No restrictions on mounting orientation: It can be used either vertically or horizontally
  ・ Automatic blow-off mechanism: The interior bimetal smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ Compact design: The number of parts is small and maintenance and inspection can be performed easily
  [Applications]
  ・ Food equipment
  ・ Cleaning equipment
  ・ Steam transport pipes, small heat exchangers, etc.

  Days to Ship:	22 Day(s) or more

• 

  Ball Float Type Air Trap, AGC1V Type

  MIYAWAKI

  [Features]
  ・ Piping cost can be reduced because no pressure equalizing pipe is required
  ・ Vertical installation allows installation in a small space
  · Made of all stainless steel and has excellent corrosion resistance
  [Applications]
  ・ Suitable for air piping, after-cooler, receiver tank, etc.

  Days to Ship:	22 Day(s) or more

• 

  Steam Traps, TB-5 Series

  YOSHITAKE

  Utilizes a proprietary internal structure (free-floating lever system and ball valve etc.), giving exceptional durability.

  Days to Ship:	18 Day(s) or more

• 

  Steam Traps, TF-1/2 Series

  YOSHITAKE

  [Features]
  · The valve and seat are made using stainless steel for excellent durability (TF-2 type).
  · Features a built-in air venting valve which significantly reduces the risk of air obstruction.
  · A float and lever-type trap with reliable operation and a large discharge capacity.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Steam Traps, TS-7/8 Series

  YOSHITAKE

  [Features]
  · Features four functions: STOP/BY-PASS/TRAP/TEST. These functions can be easily switched between using a spanner or an adjustable wrench etc.
  · Features a built-in bypass function which significantly reduces piping and construction costs.
  · The adoption of welded bellows allows use with a broad range of pressures.
  · Operates at a temperature 12°C below saturation temperature. No discharge of live steam.
  · Unaffected by back pressure. Allows for the trap to be checked.
  · The cock and valve seat are integrated as one and made of stainless steel.
  · A built-in strainer type.
  · Optional horizontal/vertical installation. (Lift the cover for mounting vertically, horizontally, and everything in between.)

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Steam Traps, TSD-42 Series

  YOSHITAKE

  The stainless steel disc and valve have been specially heat-treated for superior durability. A built-in strainer type.

  CAD ：

  2D

  Days to Ship:	25 Day(s) or more

• 

  AT-1A Type Radiator Trap

  VENN

  [Features]
  · A bellows type radiator trap for use in heating radiators of 100kPa or below. Can also be used as an end trap in low-pressure pipe lines. Corresponds to machine and equipment construction standard specifications as prescribed by the Ministry of Land, Infrastructure, Transport and Tourism and various government agencies.
  · Structured so that drainage does not accumulate, helping prevent pipes from freezing.
  · Rapidly discharges the initial ventilation drainage and air.

  Days to Ship:	12 Day(s) or more

• 

  ATB-5F Type Steam Trap with Bypass (Triple Function)

  VENN

  [Features]
  · Boasts a large discharge capacity and so can be used for everything from pipe ends to large-type equipment.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.
  · For types with a nominal diameter of 32 to 50, the adoption of a movable valve body provides excellent sealing performance and durability.
  · The test valve can be directly mounted to the trap.

  Days to Ship:	10 Day(s) or more

• 

  AT-6F Type Steam Trap

  VENN

  [Features]
  · Features a short start-up time and speedy discharge of the initial ventilation air and drainage.
  · An energy saving product that can be changed to a disc trap and that makes effective use of steam.
  · The thermoelement is made using SUS316L, giving excellent corrosion resistance and durability.
  · Can be mounted horizontally, vertically, and from the side.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.

  Days to Ship:	12 Day(s) or more

• 

  AT-6 Type Steam Trap

  VENN

  [Features]
  · Features a short start-up time and speedy discharge of the initial ventilation air and drainage.
  · An energy saving product that can be changed to a disc trap and that makes effective use of steam.

  Days to Ship:	12 Day(s) or more

• 

  AT-6FB Type Steam Trap (Built-in Anti-Freezing Valve)

  VENN

  [Features]
  · The AT-6F steam trap features a built-in non-freeze type valve at the inlet. This protects the trap against freezing when used in cold-climate regions that are prone to freezing.
  · Features a large initial air ventilation volume. Rapidly discharges drainage and air.
  · Both SS and SUS are available for the main body material.
  · Features a built-in pressure type non-freeze valve at the inlet.

  Days to Ship:	12 Day(s) or more

• 

  AF-12 Type Steam Trap

  VENN

  [Features]
  · A float-type steam trap for use with pipe ends, low-pressure steam headers, and small heat exchangers, etc.
  · Utilizes a wax type air venting valve, helping reduce the warm-up time and prevent air obstruction.
  · The flow direction can be chosen, helping make construction easy.
  · Includes suspension brackets for easy pipe support.
  · Stable operation regardless of how much drainage is produced.

  Days to Ship:	12 Day(s) or more

• 

  Combined Disc Type Steam Trap and Bypass Valve, SV-N Type

  MIYAWAKI

  [Features]
  ・ A bypass circuit is formed inside the trap with a single handle operation due to the interior of the blow valve
  ・ By omitting bypass piping, piping material costs and labor costs can be reduced. Also, the construction period can be significantly shortened
  ・ The main part of the trap (cap, disc, seat) is unitized, and the newly designed cartridge can be easily replaced, so maintenance can be performed in a very short time
  ・ The main part of the trap is designed to keep warm by using the re-evaporated steam of condensate of drainage water, so there is no blanking of the disc and it has excellent durability
  ・ The automatic blow-off mechanism quickly discharges complex water in the early stages of ventilation, shortening the equipment start-up time. Also, there is almost no air obstruction during ventilation
  [Applications]
  ・ Ideal for cleaning equipment, food equipment, dyeing equipment, etc.

  Days to Ship:	9 Day(s) or more

• 

  Ball Float Steam Trap, GC1 Type

  MIYAWAKI

  [Features]
  ・ Energy saving design (Orifice self-adjusting continuous discharge float type): It achieves high sealing performance by using a high-precision polishing float. Reduces steam loss
  ・ Automatic blow-off mechanism (Built-in bimetal): Automatically discharges air and low-temperature condensate at the beginning of ventilation
  ・ Stainless Steel: All parts except bimetal are made of stainless steel which is resistant to corrosion and has excellent durability
  ・ Compact design: The number of parts is small and maintenance and inspection can be performed easily
  [Applications]
  ・ Steam transport pipe
  ・ Steam trace, etc.

  Days to Ship:	22 Day(s) or more

• 

  Ball Float Steam Trap, GC1V Type

  MIYAWAKI

  [Features]
  ·Energy-saving design (orifice self-adjusting continuous discharge float type) and high-precision ground float achieve high sealing performance. Reduces steam loss.
  ·Automatic blow-off mechanism (built-in bimetal) automatically discharges air and low-temperature condensate at the beginning of ventilation.
  ·All parts, except stainless steel and bimetal, are made of stainless steel that is resistant to corrosion and has excellent durability.
  ·Compact design, few parts, easy maintenance and inspection.
  [Applications]
  ·Steam transport pipe.
  ·Steam trace etc.

  Days to Ship:	22 Day(s) or more

• 

  Diaphragm Type Steam Trap, DL1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics following the saturation temperature, a wide pressure range can be used without adjustment
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. Also functions as an air vent
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small and maintenance can be easily performed
  ・ The main body and essential materials are made of stainless steel and have excellent corrosion resistance
  [Applications]
  ・ Suitable for food / bio equipment, small heat exchanger / tank heating, steam main pipe / steam trace / cleaning equipment, etc.

  Days to Ship:	22 Day(s) or more

• 

  Diaphragm Type Steam Trap, DC1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics following the saturation temperature, a wide pressure range can be used without adjustment
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. Also functions as an air vent
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small and maintenance can be easily performed
  ・ The main body and essential materials are made of stainless steel and have excellent corrosion resistance
  [Applications]
  ・ Suitable for food / bio equipment, small heat exchanger / tank heating, steam main pipe / steam trace / cleaning equipment, etc.

  Days to Ship:	22 Day(s) or more

• 

  Diaphragm Type Steam Trap, DF1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics that follow the saturation temperature, a wide pressure range can be used without adjustment.
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. It also functions as an air vent.
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small, and maintenance and inspection can be easily performed.
  [Applications]
  ·Suitable for food/bio equipment, small heat exchanger/tank heating, steam main pipe/steam tracing/cleaning equipment, etc.

  Days to Ship:	22 Day(s) or more

Loading...