Drain Traps, Steam Traps（Body Material：Cast Iron）

• 

  AK-1H Type Steam Trap

  VENN

  [Features]
  · General-purpose drain trap for pipelines and headers etc. Each of the mechanisms are attached to the cover for easy maintenance.
  · A simple internal valve structure for easy maintenance.
  · Features a built-in strainer.
  · However, for the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap inlet.

  Days to Ship:	8 Day(s) or more

• 

  A3N/AF3N disk/steam trap/up to 1.6 MPaG AF3N

  TLV

  [Features]
  ·The steam heating condensate cooling type double lid structure reduces steam loss through reliable operation.
  ·The built-in bimetal type automatic blow-off mechanism shortens start-up time.
  ·Wear parts such as valves and valve seats can be replaced as a unit.
  [Applications]
  ·General purpose applications that do not require temperature control.
  ·Steam main pipe, high temperature tracing, insulation (jacket), tank heating for insulation, etc.

  Days to Ship:	11 Day(s) or more

• 

  Drainage Separator, DS-1/2 Series

  YOSHITAKE

  The drainage is efficiently separated using the centrifugal force generated by the channeling of steam and air.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  ATB-5 Type Steam Trap with Bypass (Triple Function)

  VENN

  An integrated compact structure incorporating three functions. In addition to functioning as a thermostatic type trap, it can also be used as a bypass circuit, and a stop valve.
  Effective for better utilization of space and for reducing equipment costs.
  
  [Features]
  · Boasts a large discharge capacity and so can be used for everything from pipe ends to large-type equipment.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.
  Note: Types with nominal diameters of 32 to 50 operate at a temperature 15°C lower.
  · For types with a nominal diameter of 32 to 50, the adoption of a movable valve body provides excellent sealing performance and durability.
  · The test valve can be directly mounted to the trap.

  Days to Ship:	14 Day(s) or more

• 

  AK-5F Type Steam Trap

  VENN

  Small capacity (MAX 2.0MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.
  
  [Features]
  · Utilizes SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer. However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.

  Days to Ship:	12 Day(s) or more

• 

  AK-5 Type Steam Trap

  VENN

  Small capacity (MAX 2.0MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.
  
  [Features]
  · Utilizes SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer. However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.

  Days to Ship:	12 Day(s) or more

• 

  AK-21 Type Air Trap

  VENN

  Pipe ends, receiver tanks, and drainage separators, etc.
  
  [Features]
  · A simple structure for easy maintenance.
  · A structure that is strong against contamination and scale.
  · Structured so that drainage can easily flow-in. As such, no pressure-equalizing pipe needs be installed.

  Days to Ship:	12 Day(s) or more

• 

  TB-880 Series Steam Trap

  YOSHITAKE

  [Features]
  · Utilizes a proprietary internal structure (free-floating lever system, ball valve, etc.) which gives exceptional durability.
  · Utilizes a proprietary internal structure that guarantees outstanding reliability in terms of both leakage and operation.
  · Its intermittent operation significantly increases thermal efficiency by removing the atmospheric adiabatic wall on the inner surface of the heat exchanger.
  · Operated by the difference in specific gravity between steam and condensate.

  CAD ：

  2D

  Days to Ship:	12 Day(s)

• 

  Steam Traps, TD-10NA/30NA Series

  YOSHITAKE

  The use of bimetal eliminates air obstructions. Cold water and air are simultaneously discharged during start-up, providing an efficient start-up for steam equipment.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  ATB-5F Type Steam Trap with Bypass (Triple Function)

  VENN

  [Features]
  · Boasts a large discharge capacity and so can be used for everything from pipe ends to large-type equipment.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.
  · For types with a nominal diameter of 32 to 50, the adoption of a movable valve body provides excellent sealing performance and durability.
  · The test valve can be directly mounted to the trap.

  Days to Ship:	10 Day(s) or more

• 

  AF-12 Type Steam Trap

  VENN

  [Features]
  · A float-type steam trap for use with pipe ends, low-pressure steam headers, and small heat exchangers, etc.
  · Utilizes a wax type air venting valve, helping reduce the warm-up time and prevent air obstruction.
  · The flow direction can be chosen, helping make construction easy.
  · Includes suspension brackets for easy pipe support.
  · Stable operation regardless of how much drainage is produced.

  Days to Ship:	12 Day(s) or more

• 

  AF-11H Type Large Capacity Trap

  VENN

  A solid and simple structure with excellent durability.
  
  [Features]
  · Use for large-volume drainage generating equipment such as heat exchangers, dryers, and headers, etc.
  · A simple structured, floating lever-type trap.
  · The valve body part is a balanced structure. As such, the trap boasts a large discharge capacity despite its small size.
  · The adoption of a balanced structure enables both a large discharge capacity and small size.
  · Easy disassembly, maintenance, and inspection.
  · Utilizes a wax type air vent valve, helping prevent air obstructions.
  · Continuous drainage discharge.

  Days to Ship:	10 Day(s) or more

• 

  AF-11HF Type Large Capacity Trap

  VENN

  Use for large-volume drainage generating equipment such as heat exchangers, dryers, and headers, etc.
  
  [Features]
  · A floating and lever-type trap with a simple structure.
  · A solid and simple structure with excellent durability.
  · Easy disassembly, maintenance, and inspection.
  · Utilizes a wax type air vent valve, helping prevent air obstructions.
  · Continuous drainage discharge.

  Days to Ship:	12 Day(s) or more

• 

  BA-5 Type, Drain Separator

  VENN

  Main/Branch pipes all equipment inlets, etc.
  
  [Features]
  · Separates water droplets and condensate (drainage) generated in the steam and air pipes.
  · Improved dryness in the steam lines enables a stabilized heat supply and increases heating efficiency.
  · Reduces steam hammering as caused by initial steam ventilation drainage build-up.
  · More stable when the regulator valve is operating and reduces corrosion and wear.
  · Reduces the generation of rust inside pipes by eliminating water droplets.

  Days to Ship:	12 Day(s) or more

• 

  Steam Traps, Hinged Float Trap

  SPIRAXSARCO

  NOTE: The featured image is provided for reference purposes. The actual product may differ.

  Days to Ship:	26 Day(s) or more

• 

  A3N/AF3N disk/steam trap/up to 1.6 MPaG A3N

  TLV

  [Features]
  ·The steam heating condensate cooling type double lid structure reduces steam loss through reliable operation.
  ·The built-in bimetal type automatic blow-off mechanism shortens start-up time.
  ·Wear parts such as valves and valve seats can be replaced as a unit.
  [Applications]
  ·General purpose applications that do not require temperature control.
  ·Steam main pipe, high temperature tracing, insulation (jacket), tank heating for insulation, etc.

  Days to Ship:	11 Day(s) or more

• 

  Star Inline Heater TDR-M

  HOKUTO

  An ultra-small type hot water heater that transforms the image of conventional hot water heat exchangers.
  

  Days to Ship:	12 Day(s) or more

Loading...