Safety Valves, Control Valves（Supply Side, Plumbing Thread Nominal：3/4B Page2）

• 

  RP-7, Pressure-Reducing Valve (for Steam) Benten

  VENN

  For steam cleaning of food equipment, disinfection equipment, cleaning equipment, etc.
  
  [Features]
  · Compact pilot-operated pressure-reducing valve used in equipment and devices with a relatively low flow rate.
  · Compact and lightweight (up to 50%, compared to other in-house products); device integration is supported.
  · Adoption of a piston guide structure and special seal ring makes control stable from lower flow rates to the maximum rated flow rate.
  · Manual handle control with auto locking mechanism makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RD-40, 41 Type Pressure-Reducing Valve (for Steam) Mini-Benten

  VENN

  For use in food machinery, medical equipment, laundry equipment, and other steam-based machinery
  
  [Features]
  - A direct-acting, pressure-reducing valve that is ideal for precise control of steam pressure for various equipment.
  - Compact and lightweight; optimum for integration into devices.
  - Optimal for items that need to be free of rust, such as food, kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).
  - Stainless steel body suitable for higher-grade vapor lines.
  - Provides large flow rates (heat) required when starting up equipment.
  - Main body is made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.
  - Secondary side pressure can be smoothly adjusted with the manual handle on the automatic lock mechanism.
  - Uses SUS316L bellows and a built-in strainer for high reliability.

  Days to Ship:	12 Day(s) or more

• 

  RD-30 Type Pressure-Reducing Valve (for Vapor)

  VENN

  Direct acting type general-purpose products (small and medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  ▪ Performs stable operation from the small flow rates that cannot be controlled by pilot-operated products.
  ▪ Structure is little affected by dirt particles, and maintenance is easy.
  ▪ With use of special synthetic rubber diaphragms in multi-purpose direct-acting pressure reducing valve for pipeline and various steam equipment, it can support a wide range of applications.

  Days to Ship:	12 Day(s) or more

• 

  RD-31N, 32N Type Pressure Reducing Valve, Heisei

  VENN

  Direct-acting general-purpose products (made of bronze, medium capacity) for use in construction equipment, factory equipment, etc.
  
  [Features]
  - Serves as a bronze water-pressure reducing valve meeting rust-water prevention needs.
  - We combine our pressure-reduction technology with high controllability, reliability and user-friendliness, eliminating rust generation from pipe joints and across the flow path.
  - Heisei provides reliable countermeasures for rusty water, used in building facilities, house facilities, plant facilities, boiler water supply, etc.
  - Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.
  - Low-noise design.
  - Water does not leak outside if the diaphragm is damaged.
  - Built-in strainer.
  - (Nominal diameter of 50 or less 40 mesh equivalent) Smaller approximately 50% later than FC-made conventional parts.

  Days to Ship:	12 Day(s) or more

• 

  RD-44N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

  VENN

  Direct acting type general purpose product (low-noise type and pipe-end core support) suitable for housing complexes, hotels, and offices. RD-44N type valves are equipped with only the pressure reducing function, which is fundamental for the water supply pressure composite valve series, and enables increase in construction and test efficiency.
  
  [Features]
  · Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Installation of valve in each room unit eliminates water supply variation due to level differences. 3) No water splashes due to application of appropriate pressure. Reduces water hammering. 4) During maintenance, impact of water outage does not affect other areas. 5. Stable mixing temperature resulting in improved habitability.
  · Uses chlorine water-resistant EPDM.
  · Sanitary design avoids pooling of liquids.
  · Works reliably from low differential pressures to high differential pressure.
  · Safe and secure construction is made possible due to intact pressure-reducing valves.
  · You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.
  · Easy, simple new test gag method.

  Days to Ship:	12 Day(s) or more

• 

  RD-43N, Pressure Reducing Valve for Door-to-Door (for Water / Hot Water), Benkei

  VENN

  A pressure-reducing valve for use in small-capacity, door-to-door water and hot water supply pipes installed inside studio apartments, etc.
  · For larger capacity and general complex housing, use types RD-44N, 47N, etc.
  
  [Features]
  · Utilizes chlorine water-resistant EPDM.
  · Sanitary design that prevents pooling of liquids.
  · Reliable construction from low-to-high differential pressure.
  · These are non-disassembly type pressure-reducing valves for safe and secure construction.
  · Post-construction hydraulic testing can be performed with the reducing valve installed.
  · Utilizes a new, simple test gag method.

  Days to Ship:	16 Day(s) or more

• 

  FD-6N, Fixed Flow Rate Valve (for Individual Resident Water Supply/Hot Water Supply), Benkei

  VENN

  In addition to mainly being used in central hot water supply systems for housing complexes, high-rises, and the like, this fixed flow rate valve is also used in water supplying systems. This adjustable valve automatically restricts flow rates so that flow rate is fixed in response to fluctuations in primary side pressure.
  
  [Features]
  • By using this fixed flow rate valve, it becomes possible to appropriately distribute supplied water and hot water volumes to each residence.
  • As a result, system design and construction work are simplified, energy and water are saved, and water hammer is reduced.
  • Mounting position can be changed to any orientation.
  • Wide working differential pressure range.
  • The simple structure takes advantage of rubber elasticity to maintain a stable flow rate.

  Days to Ship:	12 Day(s) or more

• 

  RD-25RSN, 50RSN Series Pressure-Reducing Valve for Water Supply

  VENN

  This is a pressure reducing valve used for supplying water to small boilers and electric water heaters. It can be freely mounted horizontally or vertically.

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Water, Liquid, Air, Gas, RD-20, 20N Series, [Heisei]

  VENN

  [Features]
  · A stainless steel, small-size pressure reducing valve that can be used for both liquid and gas supply pipes—especially in rust-intolerant places where bronze cannot be used. In addition, it can be used for stainless steel piping in door-to-door water supply systems.
  · Stainless steel and synthetic rubber are used for the liquid-contacting parts and spring casings for excellent corrosion resistance.
  · The carefully designed flow channel, utilization of square spring, etc., provide a significant size and weight reduction.
  · Freely adaptable installation positon.
  · Easy to maintain.
  · Can be used for liquid and gas, with a primary side pressure of 2.0 MPa.

  Days to Ship:	12 Day(s) or more

• 

  TD-8, 8 A Type Temperature Control Valve

  VENN

  [Features]
  It is a general purpose flange temperature regulating valve, so it is used for temperature regulation in hot water tanks, heat exchangers, heavy fuel heating apparatus, or used for cooling by passing water or refrigerants, or used at low temperatures when the surrounding atmospheric temperature is higher than the set temperature, or when the set temperature is 40°C or less.

  Days to Ship:	12 Day(s) or more

• 

  TR-4N Type Mixing Valve

  VENN

  [Features]
  • The TR-4 N mixing valve is a temperature regulating valve that is able to control the temperature of hot-water supply by simply connecting the hot water and water.
  • As well as ensuring a temperature-stable supply, it also guarantees safety as both the cold and hot water have built-in check valves.
  • A lightweight and compact design that improves workability and saves on space.
  • Complies to the performance standards of the Water Supply Act of Japan, allowing for peace of mind when used with water supply systems.
  • The thermo-element is able to track pressure fluctuations in the hot and cold water, ensuring temperature-stable hot water supply.
  • Inspection of internal components, including the thermo-element, is possible, making it easy to maintain.
  • The inlet end of the union joint (hot-water/water) features both a built-in check valve and net.

  Days to Ship:	12 Day(s) or more

• 

  AF-5N Air Vent Valve

  VENN

  A bronze air vent valve for use with high-pressure liquids that has a built-in filter (muffler) to dampen the sound of high pressure air discharge.

  Days to Ship:	12 Day(s) or more

• 

  AF-17N Air Vent Valve

  VENN

  Building equipment, housing and hot water boiler products with main bodies made from bronze and are complaint with government specifications
  
  [Features]
  · Small air vent valve to be used in a pipe, hot water boiler, fan coil, small/medium pressure tank, solar system, or others.
  · Operates stably due to the BBC (bubble dispersion) method, so water entrainment discharge does not occur.
  · The bronze made main body is compliant with government specifications.
  · Besides having a female screw shape, the vent is also available with union fitting, and tube fittings.
  · Compact and capable up to 1.0MPa.
  ▪ Equipped with manual shut-down mechanism.

  Days to Ship:	18 Day(s) or more

• 

  AF-10 Series, Air Vent Valve

  VENN

  A stainless steel air relief valve with excellent corrosion resistance and durability, with a strainer built-in to the main body, and with air intake and exhaust functions.
  
  [Features]
  · Easy design installation possible with the built-in strainer.
  · Stainless steel with superior corrosion resistance and durability.
  · The discharge port can be freely rotated 360°, so installation is simple.
  · Equipped with a manual shut-down control.

  Days to Ship:	18 Day(s) or more

• 

  AF-9 Series Air Vent Valve

  VENN

  Air vent valve with built-in check valve such as pump suction side or sealed circuit
  
  [Features]
  · Air vent valve made of stainless steel with built-in strainer in the main body that boasts superior corrosion resistance and durability. The AF-10 type series has air intake and exhaust functions.
  · AF-9 type series is an air vent valve with a built-in check valve and is structured to not intake here even when the inlet side is exposed to negative pressure. Hence, it is used when a function is required for only emitting and not in taking the air, such as in the pump suction inlet side and degassing system of sealed circuits.
  · Easy design construction possible with the built-in strainer.
  · Made of stainless steel for superior corrosion resistance and durability.
  · The exhaust vents can be freely rotated 360° and are easy to work with.
  · Equipped with manual shut-down control.
  · Does not absorb air even when the pressure is negative, and therefore can be mounted into the pump suction inlet side.

  Days to Ship:	11 Day(s) or more

• 

  AFV-1 N Air Vent Valve, with Intake Mechanism

  VENN

  For construction equipment, factory equipment, and hot water boiler, etc.
  
  [Features]
  · Small air vent valve with reinforced intake function used in piping, hot water boiler, fan coil, small/medium pressure tank, solar energy system, or others.
  · Operations are stable due to the BBC (bubble dispersion) method used on discharge side such that water entrainment does not occur.
  ▪With the included breather fitting, intake and discharge of air is possible through single port, facilitating piping without sewage intake.

  Days to Ship:	18 Day(s) or more

• 

  AFV-4N, 5 Suction and Exhaust Valves

  VENN

  The pressure on the intake side of the valve should always be 0.01 MPa or higher.
  
  [Features]
  · Air intake flow is high when loading occurs (rapid intake function).
  · Reliable air discharge operation at pressure (discharge at pressure function).
  · Air exhaust rate is high during initial water throughput (initial exhaust function).
  · Water is not discharged during air discharge.
  · The intake and exhaust ports freely rotate.
  · A net is built into the air intake part.
  · Made of stainless steel (AFV-5) which is ideal for stainless steel water piping.

  Days to Ship:	18 Day(s) or more

• 

  FM Valve Type 3

  FMVALVE

  [Features]
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the interval between timed water supply, water supply stop, and water supply start.
  ·Unique buffer mechanism prevents water hammer
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	17 Day(s) or more

• 

  FM Valve 3FB Integrated

  FMVALVE

  [Features]
  ·Effective for pressurized water supply systems
  ·This valve uses a fully open and fully closed operation method to prevent vibration.
  ·Since the water level difference from water supply to stop can be secured, malfunction due to waves is also prevented.
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.

  Days to Ship:	17 Day(s) or more

• 

  FM Valve Type S-3

  FMVALVE

  This valve can be used in both a mechanical control system with a ball tap and an electrical control system with a solenoid valve.
  [Features]
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·The strainer can be removed while the body is attached to the pipe.
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the interval between timed water supply, water supply stop, and water supply start.
  ·For 65 mm or more, the plug can be removed and the intake valve can be installed
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	17 Day(s) or more

• 

  Core Built-in Type FM Valve S-3K Type

  FMVALVE

  This valve can be used in both a mechanical control system with a ball tap and an electrical control system with a solenoid valve.
  [Features]
  ·A resin core is attached to the threaded portion of the main body connection, and has a structure that prevents the outflow of rust from the threaded portion of the steel pipe.
  ·The strainer can be removed while the body is attached to the pipe.
  ·Since it can be controlled by electricity when used in combination with a solenoid valve, it is easy to change the time water supply, water supply stop, and water supply start.
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.
  ·If the pump for the water tank is a pressurized water supply system, use an electric control system.

  Days to Ship:	18 Day(s) or more

• 

  FM Valve S-3N Type for Cold Climate

  FMVALVE

  By opening and closing the ball tap (auxiliary valve), this valve creates a pressure difference within the main valve (main valve), opening and closing the valve, and automatically repeating water supply and stoppages according to changes in the water level in the receiving tank.
  The secondary side (outlet side) is equipped with a peacock for draining water and a flow rate adjustment rod for adjusting the flow rate.
  [Features]
  ·Unique buffer mechanism prevents water hammer
  ·Peacock allows water to be drained from the secondary side (outlet side)
  ·The strainer can be cleaned and inspected without removing the main unit.
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.

  Days to Ship:	18 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB9N Type

  MIYAWAKI

  [Features]
  ・ SCCV (Self Closing and Centering Valve) mechanism (): The valve is spherical and is not fixed to the shaft, but is designed to be held with some play left, right, front and back. Since the design structure holds the valve with play, even if the shaft slightly tilts due to the effect, etc., of condensed water when the valve is closed, the valve itself can flexibly close toward the center of the valve hole
  ・ QC (Quick-Close mechanism) mechanism (): When condensate flows from the inside of the trap body to the valve hole, the valve pushed down by the expansion force of the bimetal plate gradually closes the flow passage hole provided in the guide that shuts off the inside of the body and the valve hole. The valve gradually closes the flow passage hole, weakening the flow rate of the condensate passing through the valve opening, heats the bimetal more quickly, and promotes valve closing
  ・ Also available with convenient blow valve: There is also a type with a blow valve that removes scale and pipe dust that flows into and accumulates in the trap to the outside without disassembling the trap
  ・ If you would like to have a blow valve, please specify TB9BN-C or TB9BN-R
  ・ TB9BN-C can be used up to 0.98 MPa, and cock operation is easy
  ・ TB9BN-R can be used up to 1.6 MPa
  [Applications]
  ・ Ideal for steam tracing, steam transport pipes, tank heating, heating, etc.

  Days to Ship:	14 Day(s) or more

• 

  Air Vent for Steam - AT9N Type

  MIYAWAKI

  It is an air vent for steam. [Features]·Will shorten equipment startup time as a result of quick air displacement.

  Days to Ship:	22 Day(s) or more

• 

  Air Vent for Steam - AW2 Type

  MIYAWAKI

  [Features]
  ·Rapid air evacuation shortens equipment start-up time.
  [Applications]
  ·It can be used for steam piping and various devices.

  Days to Ship:	22 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - REC1 Type

  MIYAWAKI

  [Features]
  ·It is made entirely of stainless steel and has excellent corrosion resistance.
  ·Maximum decompression ratio 30:1.
  ·Compact and lightweight design allows installation in narrow spaces.
  ·The pressure can be easily adjusted by operating the handle without using any tools.
  [Applications]
  ·food equipment.
  ·Medical equipment.
  ·Small processes such as bio-related equipment.

  Days to Ship:	22 Day(s) or more

• 

  Micro Bellows Pilot Operation Steam Pressure Reducing Valve - RE3 Type

  MIYAWAKI

  [Features]
  ·It is a plus forged product, and is ultra-compact (approximately 50% lower in overall height) and lighter (approximately 60% lighter in weight) than conventional pressure reducing valves for steam, requiring less installation space.
  ·It can be easily adjusted by simply operating the handle (with lock mechanism).
  ·The unique stainless steel micro bellows and high-precision pilot valve have been developed to ensure reliable control.
  ·Its unique stainless steel micro bellows and overstress prevention mechanism (patent pending) provide outstanding durability.
  ·The amount of heat dissipated is reduced, making it excellent in energy saving and economic efficiency.
  ·A fluororesin (PTFE) gasket is used for the main parts, so it has good sealing performance, and it is easy to disassemble, assemble, and replace parts with commercially available tools.
  [Applications]
  ·Food industry, dyeing industry, cleaning industry, apparel industry, heating equipment, air conditioning equipment, etc.

  Days to Ship:	22 Day(s) or more

Loading...