Transparent Plastic Plates, Plastic Cover Panels（Hole Machining：No Drilling Alteration）

• 

  PET Plates

  MISUMI

  [Standard large quantity available] 10% discount for 21 to 100 pieces without the need for an estimate.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Acrylic Plates / Cast Plates

  MISUMI

  [Standard large quantity available] For standard sizes and hole-machined types from 21 to 100 pieces, a 15% discount is available without the need for an estimate. [Standard large quantity available] For side milling cutters of 11 to 20 pieces, a 5% discount is available without the need for an estimate.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  PVC-free Material, Polycarbonate Plate PC (Transparent)

  TAKIRON

  Achieves superior impact strength and glass transparency. Note: Quoted from the 2013 Takiron comprehensive catalog.
  
  [Features]
  · Polycarbonate plates are made from materials with superior impact resistance, even among plastics.
  · Plastic with a transparency equal to glass that refutes the common belief that transparent materials are easy to break.
  · Possesses the highest level of impact-resistance strength while using transparent materials with approximately 20 times the strength of hard vinyl chloride and approximately 40 times the strength of acrylic.
  · Superior light permeability rate of 85% for 5 mm transparent plate, the same transparency as high grade plate glass.
  · Low thermal conductivity (1/5th of glass) and superior heat retention qualities. Useful for insulation.
  · Can be used in a wide range of temperatures, from -40°C to +120°C.
  · 1 mm thickness and resistant to high voltages of up to 30,000 volts. More than twice the insulating value as Bakelite. Optimal as electric insulation material.
  · Weather-resistant grade that prevents yellowing and is barely affected by direct sunlight, wind, rain, temperatures, etc., when compared to other plastic materials. Quality can be selected based on application.
  [Polycarbonate Processing Features]
  1. Little change in load (creep) and easy drilling and cutting.
  2. Vacuum forming and heat bending possible.
  3. Cold forming by bending into a curve under temperatures below room temperature is possible.
  · Food and Hygiene Law / UL certified product / Railway car compliance certified product.

  Days to Ship:	10 Day(s) or more

• 

  Extra Thin Resin Sheets/Polyacetal/Fluororesin/Polycarbonate

  MISUMI

  Thin Type Plastic Sheets with 0.1~1.0 thickness. Polyacetal, Fluororesin or Polycarbonate can be selected as the product material.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Polycarbonate Plates

  MISUMI

  [Standard large quantity available] 15% discount for 21 to 100 pieces, no estimate required.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Acrylic Plates - Economy, Curved Panels/Extruded Plates

  MISUMI

  [Features]·It is cheaper than cast plates · Extruded plate type acrylic plates.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Plastic Sheets

  MISUMI

  · Thin plates from 0.5 to 2.0 mm can be specified in increments of 1 mm.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Antistatic PVC Plates

  MISUMI

  Excels in chemical resistance and flame retardance, and superior in cost-effectiveness among anti-static materials.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  PVC Plate ESS

  TAKIRON

  Hard PVC plate optimal for a wide range of applications. Quoted from the 2013 Takiron plate comprehensive catalog.
  
  [Features]
  · Proven record having been adopted as the first T type in Japan.
  · Extrusion plate with high thickness accuracy.
  · Little loss of gloss or surface peeling even during heat processing. Long sizes are also possible

  Days to Ship:	12 Day(s) or more

• 

  Non-PVC Material PET Plates (Amorphous Polyester)

  TAKIRON

  High functioning grade optimal for electronics, food and other industrial applications. Quoted from 2013 Takiron plate comprehensive catalog.
  
  [Features]
  · Material with low combustion calories even for plastics that does not generate poisonous halogen gases when burnt.
  · Possesses high strength based on Charpy impact testing that is approximately five times the initial strength of general acrylic.
  · Can be made thinner than conventional products depending upon the application.
  · Petech is self-extinguishing, as opposed to acrylics which are highly flammable.
  · Certified for superior flame retardance. Passed the materials combustion test for railroad cars.
  · Does not turn white even when cold bent. Punching of thin objects as thin as 1.5 mm possible, whereas such punching is not possible with acrylics.
  · Easier to form at low temperatures than acrylics when heated

  Days to Ship:	10 Day(s) or more

Loading...