(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Threaded Inserts（Length L (after insertion) (D = Thread Dia. M)：1D）
These generally have embedded male threads. Coil shapes are inserted with a dedicated tool, press-fit into a collar, or mounted while self-tapping threads.
Choose a shape to suit the application. Some items require dedicated tools.
| Days to Ship |
|
|---|
-
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products.
[Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18
You can purchase from 1 piece!
Application: Strengthens the female thread of the base.
Features: Durable screw connection. You can create a concise design.
Material: SUS304.- Volume Discount
Days to Ship: Same day or more -
Recoil-Free (mm) SUS304【1-3 Pieces Per Package】
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Days to Ship: 8 Day(s) or more -
RECOIL
The color of the main body will become silver when the method of heat treatment changes.
Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.Days to Ship: 11 Day(s) or more -
RECOIL
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
Days to Ship: 8 Day(s) or more -
Recoil-Free (Specified mm) SUS304
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingDays to Ship: 15 Day(s) or more -
Recoil Packet (Milli)【10 Pieces Per Package】
RECOIL
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10Days to Ship: 16 Day(s) or more -
JAPAN DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8Days to Ship: 14 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Days to Ship: 16 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Days to Ship: 16 Day(s) or more -
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-800 Pieces Per Package】
TOKAI METAL INDUSTRY
These inserts are the best choice for easy and secure fitment into plastic holes.
- Volume Discount
Days to Ship: 16 Day(s) or more -
Recoil Packet (METRIC)【10 Pieces Per Package】
RECOIL
[Features]
· The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.
· The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.
· Once equipped, its spring effect makes it almost permanently non-extractable.Days to Ship: 11 Day(s) or more -
Male Screw Repair Coil Thread -R【20 Pieces Per Package】
KS SANGYO
Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.Days to Ship: 17 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingDays to Ship: 21 Day(s) or more -
Sprue【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount
Days to Ship: 14 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Days to Ship: 16 Day(s) or more -
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
Days to Ship: 16 Day(s) or more -
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】
TOKAI METAL INDUSTRY
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.Days to Ship: 16 Day(s) or more -
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-3,000 Pieces Per Package】
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
Days to Ship: 16 Day(s) or more -
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Days to Ship: 11 Day(s) or more -
RECOIL
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
Days to Ship: 11 Day(s) or more -
JAPAN DRIVEIT
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2Days to Ship: 15 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingDays to Ship: 15 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingDays to Ship: 21 Day(s) or more -
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingDays to Ship: 15 Day(s) or more -
Brass Bit Insert (Standard, Double-sided) HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingDays to Ship: 15 Day(s) or more -
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Sprue (Unified) (UNC)【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Sprue (Unify) (UNF)【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.
Days to Ship: 14 Day(s) or more -
NIPPON SPREW
This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Dodge Bit Insert Standard SD (Brass Cadmium-Less)
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Days to Ship: 16 Day(s) or more -
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Days to Ship: 11 Day(s) or more -
Stainless Steel Sprue (Other, Fine)
SUNCO
[Nominal M] 8, 24, 33
[Material] Stainless Steel
[Surface Processing] BareDays to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Stainless Steel Recoil【1-100 Pieces Per Package】
SUNCO
[Nominal M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
[Material] Stainless Steel
[Surface Processing] BareDays to Ship: 14 Day(s) or more -
Stainless Steel E-Sert Fine (Hemlock-Made)【1-100 Pieces Per Package】
SUNCO
[Nominal M] 6, 8, 14, 18, 20, 22, 24, 27, 30, 33, 36, 39
[Material] Stainless Steel
[Surface Processing] BareDays to Ship: 14 Day(s) or more -
Stainless Steel E-Sert (Unify) (UNC)【100 Pieces Per Package】
SUNCO
[Nominal]
[Material] Stainless Steel
[Surface Processing] BareDays to Ship: 8 Day(s) or more -
Stainless Steel E-Sert (Unify) (UNF)【1-100 Pieces Per Package】
SUNCO
[Nominal] #6-40, #8-36, #10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 5/8-18, 3/4-16, 7/8-14, 1-12
[Material] Stainless Steel
[Surface Processing] BareDays to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Lock E-Sert【1-100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 2.5 2.6 3 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36Days to Ship: 14 Day(s) or more -
Lock E-Sert (Other Meshes)【100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 10 12 24 30 42Days to Ship: 8 Day(s) or more -
Lock E-Sert (Fine Mesh)【1-100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 8 10 12 14 16 18 20 22 27 33 36 39Days to Ship: 8 Day(s) or more -
Brass Bit Insert (Flange Type) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingDays to Ship: 15 Day(s) or more -
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5/6/8/10
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingDays to Ship: 15 Day(s) or more -
ACCURATE
· Can easily be taken out with the included tang. Fine adjustment of depth is possible even after insertion.
· Newly-developed insertion tool reduces mistakes and increases speed of work.Days to Ship: 13 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Type |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | RECOIL | RECOIL | RECOIL | RECOIL | HIROSUGI-KEIKI | RECOIL | JAPAN DRIVEIT | MISUMI | TSUGAMI | TOKAI METAL INDUSTRY | RECOIL | KS SANGYO | HIROSUGI-KEIKI | NIPPON SPREW | TSUGAMI | TOKAI METAL INDUSTRY | TOKAI METAL INDUSTRY | TOKAI METAL INDUSTRY | RECOIL | RECOIL | JAPAN DRIVEIT | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | NIPPON SPREW | NIPPON SPREW | NIPPON SPREW | NIPPON SPREW | TOKAI METAL INDUSTRY | RECOIL | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | ACCURATE |
| Product Series | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-800 Pieces Per Package】 | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-3,000 Pieces Per Package】 | Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW | Stainless Steel E-Sert Fine (Hemlock-Made)【1-100 Pieces Per Package】 | Stainless Steel E-Sert (Unify) (UNC)【100 Pieces Per Package】 | Stainless Steel E-Sert (Unify) (UNF)【1-100 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | 8 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 15 Day(s) or more | 16 Day(s) or more | 14 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 11 Day(s) or more | 17 Day(s) or more | 21 Day(s) or more | 14 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 15 Day(s) or more | 15 Day(s) or more | 21 Day(s) or more | 15 Day(s) or more | 15 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 16 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 14 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 15 Day(s) or more | 15 Day(s) or more | 13 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 16 | 2 ～ 42 | 3 ～ 12 | 3 ～ 20 | 8 ～ 24 | 2.6 ～ 8 | 6 ～ 10 | 3 ～ 10 | 3 ～ 8 | 2 ～ 24 | 2.6 ～ 10 | 2 | 3 ～ 6 | 2.6 ～ 8 | 2 ～ 30 | - | 1.7 ～ 6 | 2 ～ 6 | 3 ～ 8 | - | 3 ～ 24 | 4 | 2.6 ～ 8 | 2.6 ～ 8 | 2 ～ 5 | 2 ～ 5 | 10 ～ 20 | - | - | 10 | 5 | - | 24 | - | 2 ～ 16 | 6 ～ 30 | - | - | 30 | 3 ～ 16 | 10 | 8 ～ 33 | 3 ～ 4 | 3 ～ 10 | 3 ～ 6 |
| Type | Standard | Standard | Standard | Standard | Standard | Self-Tapping | Standard | Press Fit | Standard | Standard | Standard | Standard | Standard | Self-Tapping | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Press Fit | Self-Tapping | Self-Tapping | Press Fit | Press Fit | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Press Fit | Press Fit | Standard |
| Material | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Inconel X-750 | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) / Phosphor Bronze | Stainless Steel (SUS303/304) | Brass | Brass | Brass | Stainless Steel (SUS303/304) | Phosphor Bronze | Brass | Brass | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) |
| Screw Type | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Fine) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Unified (Fine) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D |
| Application | Light Metal | Light Metal | Light Metal / Cast Iron | Light Metal | Light Metal | Light Metal | Light Metal | - | Light Metal | Light Metal / Cast Iron / Resin General | Resin General | - | Light Metal / Cast Iron / Resin General | Cast Iron | Light Metal | Light Metal / Cast Iron / Resin General | Resin General | Resin General | Resin General | Light Metal | Light Metal | Resin General | Light Metal | Cast Iron | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Resin General | Light Metal | - | - | - | - | - | - | - | - | - | - | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General |
| Notch | Provided | Provided | Provided | Provided | Provided | Not Provided | Provided | Not Provided | Provided | Provided | Not Provided | - | Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-20 ～ #10-32 | - | - | - | - | - | - | - | 1/2-13 ～ #10-24 | 1/4-28 ～ #10-32 | - | - | 1/2-13 ～ #10-24 | - | 3/8-24 | - | - | #6-32 | 3/8-24 ～ 5/16-24 | - | - | - | - | - | - | - |
| Shape | - | - | - | - | - | Slotted | - | Standard | - | - | Standard | - | Standard | Slotted | - | - | Standard | Standard | Standard | - | - | Standard | Slotted | Slotted | Standard | Standard | - | - | - | - | Standard | - | Standard | Standard | Standard | Standard | Slotted | Standard | - | - | - | - | Standard | Standard | - |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | - |
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Type
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
Narrow search by specifying Manufacturer
-
- SUNCO (10)
- RECOIL (9)
- HIROSUGI-KEIKI (8)
- NIPPON SPREW (5)
- TOKAI METAL INDUSTRY (5)
- JAPAN DRIVEIT (2)
- TSUGAMI (2)
- ACCURATE (1)
- KS SANGYO (1)
- SEL JAPAN (0)
- BOHSEI (0)
- ESCO (0)
- KKV (0)
CAD
-
- 2D
- 3D
Related Categories to Threaded Inserts
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy