Metal Tube Options

• 

  Metal Conduit Terminal Protection Cap

  MISUMI

  Terminal cap for FAG / FSV / FTUB / FSN series only.
  Please use when protecting the terminal of the metal tube. Can be easily connected with a lock nut.
  A round terminal contact is also possible.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Metal Conduit Saddle (One Side Fixed)

  MISUMI

  A metal protective sleeve saddle clamp that is a conduit mounting part with one mounting hole on one side.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Metal Conduit Saddle (2 - 3 piece Fixed)

  MISUMI

  A metal protective sleeve saddle clamp for holding 2 or 3 conduits side by side.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Ferrules【1-30 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  ・These products are steel ferrules for protecting the pipe ends of Keiflex units.

  Days to Ship:	9 Day(s) or more

• 

  Bushings (insulation type)【20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  ・These bushings are attached to the ends of plica tubes to prevent damage to the coating of wires.
  ・Insulation type.
  ・Screw method tubing connection for the plica tube.

  Days to Ship:	16 Day(s) or more

• 

  World Ductor (Ductor Clip Cable Conduit Support for Flexible Waterproof Metal Cable Conduit)【1-10 Pieces Per Package】

  NEGUROSU

  Metal fitting which provides support in ductor channels for flexible, vinyl-coated, bimetallic electrical wiring tubes.

  Days to Ship:	9 Day(s) or more

• 

  Saddle Clamp for Threaded Conduit

  PANASONIC

  [Features]
  ・ Used when attaching conduit to construction materials.
  ・ Electrogalvanized steel plate.

  Days to Ship:	16 Day(s) or more

• 

  Metal conduit connector (Straight)

  MISUMI

  Metal conduit connector for FAG / FSV / FTUB / FSN series only (straight model).
  Parallel pipe screw (PF screw) specification

  • Volume Discount

  • IP67

  Days to Ship:	Same day or more

• 

  Keiflex Accessory, Combination Coupling (Thin Wall Steel Conduit Connection Type)【10-20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  · Threaded combination coupling for connecting the plica tube and steel conduit.
  ・Suitable for connections for thin steel electrical conduits.

  Days to Ship:	13 Day(s) or more

• 

  Pyrak (Pipe support fitting for general shaped steel materials)【20 Pieces Per Package】

  NEGUROSU

  Can support a conduit at any angle on the back and bottom. Combined with W3-FN, hanging bolt W3/8 can be hung vertically.

  Days to Ship:	16 Day(s) or more

• 

  Metal Conduit Connector (For MS Connector)

  MISUMI

  Metal conduit connector for FAG / FSV / FTUB / FSN series only (MS connector connection model).
  American unified screw specification.
  Please use when connecting MS connector to the metal tube

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Metal Conduit Connector (For MS Drip-Proof Connector)

  MISUMI

  A connector for connecting the drip-proof MS connectors MS3106 A and MS3108 A to conduits. Compliant with IP67 protective structure.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Waterproof combination coupling (waterproof pre-coupling + screwless steel wire conduit)

  SANKEI MANUFACTURING

  [Features]
  · Combination coupling thanks to connection of waterproof pre-coupling and screwless conduit.
  · Union method for connecting the plica tube.
  · The tensile strength of the plica tube and couplings is 500N (JIS medium).
  · The tensile strength of the electrical wire conduit and coupling for #15-30 is 500N (JIS medium), and 1000N for 38 and over (JIS heavy).

  Days to Ship:	16 Day(s) or more

• 

  World Ductor (Ductor Clip Cable Conduit Support) SD-DC【10 Pieces Per Package】

  NEGUROSU

  Metal fittings that support pipes to a ducter channel. The edge of the clip is cut and raised to prevent damage to the coating of a cable, etc.

  Days to Ship:	14 Day(s) or more

• 

  Junction Box (fireproof structure)

  SHIMADA ELEC

  [Features]
  • Appropriate for use in Class 1 and Class 2 hazardous locations
  • Suitable for outdoor use thanks to the O-ring sealed cover providing excellent waterproof properties
  [Applications]
  • Joining conduits in explosion-proof electrical installations
  • Branching and connecting electrical wires

  Days to Ship:	18 Day(s) or more

• 

  Metal Conduit Connector (90° Angle)

  MISUMI

  Metal conduit connector for FAG / FSV / FTUB / FSN series only (angle model).
  Parallel pipe screw (PF screw) specification.
  Space-saving wiring is possible since the connector is bent at 90 degrees.

  • Volume Discount

  • IP67

  Days to Ship:	Same day or more

• 

  Sunflake-ROBO knockout connection use connector (standard)【1-5 Pieces Per Package】

  SANKEI MANUFACTURING

  Metal conduit option, SANFLEKI-ROBO connector.
  [Features]
  ·Since N2 (standard type) accessories are quick connection types, no tools are needed to tighten cap nuts.
  ·Connections to SANFLEKI ROBO can only be done by hand.
  ·Main material of the main body, etc. is polyamide 66.
  ·Compliant with protection rating IP67.
  ·Temperature range use is -20 to +90°C.
  [Applications]
  ·This connector is used to connect a SANFLEKI-ROBO to a knockout of control panel and the like.

  Days to Ship:	12 Day(s) or more

• 

  Ductor Clip (DC)【10 Pieces Per Package】

  NEGUROSU

  The edge of the clip is filed off to prevent damage to the cable covering (hot-dip zinc galvanized steel plate).

  Days to Ship:	14 Day(s) or more

• 

  Pyrak (Angrak for structural steel pipe)【20 Pieces Per Package】

  NEGUROSU

  A cable conduit can be attached to structural steel pipes by combing this product with Pairack clips.

  Days to Ship:	16 Day(s) or more

• 

  Pyrak clip (Cable conduit support clip)【1-20 Pieces Per Package】

  NEGUROSU

  Products for all sizes of conduits are available. Products finished with hot-dip galvanizing and made of stainless steel for outdoor use are also available.

  Days to Ship:	14 Day(s) or more

• 

  World Ductor (Ductor Clip Cable Conduit Support) Z-DC【10 Pieces Per Package】

  NEGUROSU

  This is a metal fitting for supporting pipes in ductor channels (hot-dip zinc galvanized finish (HDZ)).

  Days to Ship:	14 Day(s) or more

• 

  World Ductor (For ceilings and walls)

  NEGUROSU

  This is a short ductor that includes a bolt mounting hole that has been provided by cutting a D1 ductor channel cut into a short length.

  Days to Ship:	8 Day(s) or more

• 

  Reducer (fireproof structure)

  SHIMADA ELEC

  [Features]
  • Appropriate for use in Class 1 and Class 2 hazardous locations
  [Applications]
  • Joining conduits in explosion-proof electrical installations
  • Joining conduit to electrical equipment or junction boxes (hubs) with different diameter fittings

  Days to Ship:	18 Day(s) or more

• 

  Flexible Model Tube Connector for KSN (Cylindrical Short Head)

  MISUMI

  Dedicated connector for the KSN series. Terminal protection cap ideal for burr protection of the metal tube cut end

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Metal Conduit Connector (45° Angle)

  MISUMI

  Metal conduit connector for FAG / FSV / FTUB / FSN series only (45°angle model).
  Space-saving wiring is possible since the connector is bent at 45 degrees.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Metal Conduit Connector (Straight / PG Screw)

  MISUMI

  Metal conduit connector for FAG / FSV / FTUB / FSN series only (HAN connector connection model).
  PG screw specification. Please use when connecting the Han connector from Harding, Inc. to the metal tube

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Metal Conduit Ground Ring

  MISUMI

  Ground ring for FAG / FSV / FTUB / FSN series only.
  Please use in areas where there is a risk of the power cable tube and the box becoming electrically and mechanically defective.
  It can be easily connected with a lock nut.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Connector (includes parallel male screws)【1-20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  This connector joins a Keiflex conduit to the knockout point on the control panel. Includes parallel male screws.
  
  
  *Please be aware there was a mistake in the 2015 wiring parts catalog. [KMBG28] The notation “per item” refers to products sold in packs which contain multiple units per pack, and does not indicate items sold individually. We apologize for any inconvenience this may have caused.

  • STOCK

  Days to Ship:	Same day or more

• 

  Combination coupling (K-Flex + thick steel/thin steel wire tube)

  SANKEI MANUFACTURING

  [Features]
  · Threaded combination coupling for connecting K-flex and steel wire tubing.

  Days to Ship:	16 Day(s) or more

• 

  Combination Coupling (for use with a Keiflex and a steel electrical conduit or thick steel electrical conduit)【1-5 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  · Diecast combination coupling for connecting a Keiflex tube and a steel electrical conduit.
  · For use with thick steel electrical conduits.

  Days to Ship:	13 Day(s) or more

• 

  Keiflex Accessory, Combination Coupling (Thick Wall Steel Conduit Connection Type)【2-20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  · Threaded combination coupling for connecting the plica tube and steel conduit.
  ・Suitable for connections for thick steel electrical conduits.
  ・The plica tube and steel electrical conduit connections are both screw connections.

  Days to Ship:	13 Day(s) or more

• 

  Combination Screw Coupling (for use with a standard plica and a steel electrical conduit without screws)【20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  • Combination coupling for connecting a plica tube and steel electrical conduit without screws.
  • The plica tube connection is a screw connection, and the steel electrical conduit connection is fixed in place with small screws.
  • The tensile strength of the plica tube and couplings is 500 N (JIS medium).
  • The tensile strength of the coupling with the electrical conduit is 500 N for model numbers 10–30 (JIS medium), and 1, 000 N for model numbers 38 and above (JIS heavy).

  Days to Ship:	13 Day(s) or more

• 

  Knock-out use connector (With thick steel wire conduit tube thread)【1-20 Pieces Per Package】

  SANKEI MANUFACTURING

  Metal conduit option, connector for standard plica tubes.
  [Features]
  ·Screw-in method for plica tube connections.
  ·Main material of the main body, etc. is zinc alloy die-cast.
  ·Non-waterproof specification.
  ·Operating temperature range is -45 to +150°C.
  ·Includes a steel lock nut (SPHC).
  ·Tensile strength of the plica tube and connector is 500 N (JIS C8461-22 code 3 medium).
  [Applications]
  ·Non-union connector is used to connect a waterproof plica tube to the knockout of a enclosure.

  Days to Ship:	13 Day(s) or more

• 

  Connector for Knockout Use (includes a male screw for a thin steel electrical conduit)【1-10 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  · Non union type connector for connecting the plica tube to knockouts in boxes.
  · With screw for thin steel wiring tube.

  Days to Ship:	9 Day(s) or more

• 

  Serrated knife

  SANKEI MANUFACTURING

  [Features]
  Flexible metal conduit Plica Tube.

  Days to Ship:	16 Day(s) or more

• 

  Meal Connector (includes a male screw for a thin steel electrical conduit)【1-20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  ・This is a connector for connecting the Keiflex to the knockout point on the control panel.
  · With screw for thin steel wiring tube.

  • Volume Discount

  Days to Ship:	14 Day(s) or more

• 

  Connector for Keiflex KM Type Accessory Knockout Connection (Parallel Pipe Thread Male Thread Type)【5-20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  ・This is a plastic connector for connecting the Keiflex to the knockout point on the control panel.
  · Equipped with tube inline male threads.

  Days to Ship:	16 Day(s) or more

• 

  Waterproof combination coupling (waterproof pre-coupling + threaded steel wire conduit)【1-20 Pieces Per Package】

  SANKEI MANUFACTURING

  [Features]
  · Combination coupling thanks to connection of waterproof pre-coupling and steel conduit.
  · Union method for connecting the plica tube.
  · Threaded screw connection of the steel wire conduit.
  · The tensile strength of the plica tube and couplings is 500N (JIS medium).

  Days to Ship:	13 Day(s) or more

• 

  Ductor Clip Cable Conduit Support (S-DC)【10 Pieces Per Package】

  NEGUROSU

  [Features]
  • The edge of the clip has been cut to prevent damaging the cable covering (stainless steel (SUS)).

  Days to Ship:	14 Day(s) or more

• 

  Ductor Clip Cable Conduit Support (ZDC)【10 Pieces Per Package】

  NEGUROSU

  The edge of the clip has been filed down to prevent damage to the cable coating (hot-dip zinc galvanized finish (HDZ)).

  Days to Ship:	14 Day(s) or more

• 

  Pyrak (For lip groove-shaped steel materials)【20 Pieces Per Package】

  NEGUROSU

  Effectively arranged round holes for receiving clips and slotted holes for screwing enable efficient piping work.

  Days to Ship:	14 Day(s) or more

• 

  Pyrak (Pyrak clip for flexible metal cable conduit)【10 Pieces Per Package】

  NEGUROSU

  This clip can be used in combination with pipe racks to connect with various types of steel material pipe racks to provide support for various types of flexible electrical wiring tubes.

  Days to Ship:	16 Day(s) or more

• 

  World Ductor (Protection cap for Ductor clip)【10 Pieces Per Package】

  NEGUROSU

  Covers the protruding parts of ductor clips to ensure safety during work.

  Days to Ship:	14 Day(s) or more

• 

  Panel Connector

  HAGI

  [Features]
  - Connects sensors from assorted manufacturers to fiber protectors.
  - Head connector connects to the sensor head.
  [Use]
  - Used for pull-out parts of measuring instruments, sensor devices, robots, and amusement devices as a sensor-protecting tube terminal connector.

  Days to Ship:	12 Day(s) or more

• 

  Union Coupling (fireproof structure)

  SHIMADA ELEC

  [Features]
  - Can be used in Class 1 and Class 2 hazardous locations.
  - Conduits and electric motor parts can be connected to each other easily without any rotation required.
  [Use]
  - Wire tube accessory for explosion-proof electrical work.
  - SUM format: male screw x female screw, SUF format: female screw x female screw.

  Days to Ship:	16 Day(s) or more

Loading...