(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 sampai dengan 20:00 pada tanggal 16/6/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (WIB) 16/6/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（Type：Square）

475 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

1
2
3
4
5
Next >>

GSX MILL Slot 1.5D GSXSLT-1.5D

NACHI(FUJIKOSHI)

Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.

Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

On Sale Till 31/03/2025

(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

The Misumi's original fine intermediate flute length is available at a reasonable price

Volume Discount

XAL
General Steel
4 Flutes

	Special Price
Days to Ship:	Same day or more

GS MILL 4-Flute Blade 4GS

NACHI(FUJIKOSHI)

Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.

Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

On Sale Till 31/03/2025

(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model

MISUMI

Popular sizes that support deeper side milling are available in XAL Series

Volume Discount

XAL
General Steel
4 Flutes

	Special Price
Days to Ship:	Same day or more

GS MILL Hard GSH

NACHI(FUJIKOSHI)

The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.

Days to Ship: 16 Day(s) or more
GSX MILL VL 2.5D GSXVL4-2.5D

NACHI(FUJIKOSHI)

Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.

Days to Ship: 16 Day(s) or more
(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

MISUMI

Stub flute length items that are ideal for grooving are available at incredibly low prices

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 12 Day(s) or more
X's Mill Geo Slot GEOSLT

NACHI(FUJIKOSHI)

Capable of continuous high-performance drilling of holes and grooving with a wide range of materials, from raw materials to hardened materials.

Days to Ship: 16 Day(s) or more
Epoch Deep Square (PN Coating), EPDSE2□□□-□□.□-PN

MITSUBISHI HITACHI TOOL

[Notice] Improvements of the cutting edge and neck shape suppress sagging and have achieved high-precision machining. The use of PN coating enables even longer lifespan of machining.

Days to Ship: 12 Day(s) or more
Endmill with 3 Carbide Flutes for Aluminum Alloys ALE-3DLC

KYOWA SEIKO

[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking

Days to Ship: 16 Day(s) or more
CoroMill Plura - Dedicated End Mill for Rough Machining and Finish Machining 2P340-PB

SANDVIK

High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

Days to Ship: 16 Day(s) or more
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 12 Day(s) or more
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE

OSG

[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.

Days to Ship: 2 Day(s) or more
AL3D-2DLC Aluminum-Only End Mill (DLC Coating)

NS TOOL

Capable of stable high efficiency machining under all conditions. Adopts a uniquely adhesive high DLC coating suited to long periods of machining

Days to Ship: 12 Day(s) or more
ZX Coat UPMILL Slot SSUP3000ZX

SUMITOMO ELECTRIC HARDMETAL

The ZX coating provides hardness comparable to the CBN sintered body and increases abrasion resistance, oxidation resistance, and peeling resistance. 6 times longer life than comparable non-coated products.

Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

MISUMI

3-flute structure that's excellent in discharging chips

Volume Discount

Non-Coated

Aluminum

3 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
GSX MILL 4-Flute Blade 4D GSX4C-4D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills WX Super Coated 4 Flutes Short_WXS-EMS

OSG

Ultra-heat-resistant, ultra-hard newly developed WX super coated high rigidity ball end mill. High-speed, high-precision machining of hardened steel as well as, of course, high-speed general steel machining.

Days to Ship: 2 Day(s) or more
MX430 MUGEN-COATING 4-Flute LEAD 30 End Mill

NS TOOL

Standard type providing versatile support

Days to Ship: 12 Day(s) or more
Epoch Panacea Square, 4-Flute HGOS4□□□-PN

MITSUBISHI HITACHI TOOL

[Features]
· PN coating with phenomenal adhesion resistance and abrasion resistance.
· Enables machining of a wide range of work materials.

Days to Ship: 12 Day(s)
Solid one cut end mill DZ-OCEL2

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 16 Day(s) or more
Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX

7 LEADERS

[Features]
· 3.0D blade length type.
· 4-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· The multilayer coating uses nanoparticles.
· Excellent lubricity and heat resistance.
· Suitable for a wide range of work materials from general steel to high hardness steel.
· Enables groove cutting (ap 0.5D to 1.0D) as is after machining in the Z axis direction (ap 0.5D to 1.0D).

Days to Ship: 12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

On Sale Till 31/03/2025

(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

MISUMI

The Misumi's unique lineup of fine flute length is available at attractive low prices

Volume Discount

XAL
General Steel
2 Flutes

	Special Price
Days to Ship:	Same day or more

On Sale Till 31/03/2025

XAC series carbide square end mill, 4-flute / short model

MISUMI

[Specification]
·Standard TiAlN coating

Volume Discount

TiAlN
General Steel
4 Flutes
S (Short)

	Special Price
Days to Ship:	Same day or more

TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 2-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

MISUMI

A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

B (Stub)
Days to Ship: 12 Day(s) or more
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model

MISUMI

The Misumi's original fine intermediate flute length is available at a reasonable price

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 12 Day(s) or more
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 10 Day(s) or more
X's Mill Hard Long SLXSMH

NACHI(FUJIKOSHI)

Capable of high-efficient machining of hardened materials. Suitable for wide side finishing.

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 2D GSX4C-2D

NACHI(FUJIKOSHI)

[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting

Days to Ship: 16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE

OSG

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

	Special Price
Days to Ship:	Same day or more

2-Flute Keyway (OH1) MG-EKD [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

for keyway (OH1)

Days to Ship: 12 Day(s) or more
Regular Grain Carbide End Mills CrN coated 4 Flutes Short for Copper, Aluminum Alloys and Plastic_CRN-EMS

OSG

Can be used for a variety of cutter paths from high-precision, high-efficiency machining of the standing wall to helical machining, contouring machining and ramping machining. The amount of protrusion can be freely adjusted thanks to the fine-handle shank design.

Days to Ship: 12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS

OSG

[Features]
· With its WXL hard lubricating coating, this end mill offers effective cutting performance on a wide range of materials, including general steel, quenched steel and copper alloys.
Recommended for both wet-type and dry-type milling.

	Special Price
Days to Ship:	Same day or more

Micro Grain Carbide End Mills 4 Flutes Long_MG-EML

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

The shape of the cutting edge is sharp for diameters up to ⌀9.5, and sharp for diameters of ⌀10 or more.

Days to Ship: 12 Day(s) or more
WXS Coated Multiple Flutes Short Super_FXS-CR-EMS

OSG

High-speed machining end mill with extremely high tool rigidity. High speed machining of hardened steel is also possible.

Days to Ship: 12 Day(s) or more
NX-40 Lead 40 End Mill

NS TOOL

The blade length is 4x the blade diameter and the torsion angle is 40°. Strong torsion angle enables smooth chip discharge

Days to Ship: 10 Day(s) or more
MSX440 MUGEN-COATING POWER End Mill

NS TOOL

Adoption of unequal lead makes it perfect for semi-rough to rough finishing of stainless steel and difficult to cut materials

Days to Ship: 12 Day(s) or more
MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill

NS TOOL

Deep processing is smooth, and deflection of machining surface has been minimized while employing a long blade

Days to Ship: 12 Day(s) or more
Aurora Coat, Square End Mill ASM2000DL

SUMITOMO ELECTRIC HARDMETAL

The ultra-smooth aurora coating has low welding and an excellent finish. Since the cutting resistance is low, it enables high feed cutting and low rigidity workpiece processing.

Days to Ship: 16 Day(s) or more
SLE2 Slotting End Mill G2

ASAHI TOOLS

ø3 to ø7 are carbide tipped specifications.
Ideal for spot facing and hole bending repair.
·Machining applications (machining shape): flat surface / counterboring tool
·Materials: Carbide
·Work material: cast iron / aluminum / copper / resin
・ Coating: Uncoated
·Number of edges (Pcs.): 2
·Helix angle: no helix angle

Days to Ship: 12 Day(s) or more
All Purpose Square End Mill Short 2-Flute 3633

GUHRING

Machining is possible with a wide range of materials, from raw materials to hardened materials.

Days to Ship: 16 Day(s) or more
Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC

KYOWA SEIKO

[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking

Days to Ship: 16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

		On Sale Till 31/03/2025		On Sale Till 31/03/2025																			On Sale Till 31/03/2025	On Sale Till 31/03/2025									On Sale Till 31/03/2025			On Sale Till 31/03/2025
Brand	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	MITSUBISHI HITACHI TOOL	KYOWA SEIKO	SANDVIK	MISUMI	OSG	NS TOOL	SUMITOMO ELECTRIC HARDMETAL	MISUMI	NACHI(FUJIKOSHI)	OSG	NS TOOL	MITSUBISHI HITACHI TOOL	DIJET	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	SUMITOMO ELECTRIC HARDMETAL	ASAHI TOOLS	GUHRING	KYOWA SEIKO
Product Series	GSX MILL Slot 1.5D GSXSLT-1.5D	(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model	GS MILL 4-Flute Blade 4GS	(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model	GS MILL Hard GSH	GSX MILL VL 2.5D GSXVL4-2.5D	(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model	X's Mill Geo Slot GEOSLT	Epoch Deep Square (PN Coating), EPDSE2□□□-□□.□-PN	Endmill with 3 Carbide Flutes for Aluminum Alloys ALE-3DLC	CoroMill Plura - Dedicated End Mill for Rough Machining and Finish Machining 2P340-PB	Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill	Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE	AL3D-2DLC Aluminum-Only End Mill (DLC Coating)	ZX Coat UPMILL Slot SSUP3000ZX	Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	GSX MILL 4-Flute Blade 4D GSX4C-4D	Micro Grain Carbide End Mills WX Super Coated 4 Flutes Short_WXS-EMS	MX430 MUGEN-COATING 4-Flute LEAD 30 End Mill	Epoch Panacea Square, 4-Flute HGOS4□□□-PN	Solid one cut end mill DZ-OCEL2	Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX	(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model	XAC series carbide square end mill, 4-flute / short model	TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model	(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model	VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)	GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D	X's Mill Hard Long SLXSMH	GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D	GSX MILL 4-Flute Blade 2D GSX4C-2D	Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE	2-Flute Keyway (OH1) MG-EKD [Alterations Available]	Regular Grain Carbide End Mills CrN coated 4 Flutes Short for Copper, Aluminum Alloys and Plastic_CRN-EMS	Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS	Micro Grain Carbide End Mills 4 Flutes Long_MG-EML	WXS Coated Multiple Flutes Short Super_FXS-CR-EMS	NX-40 Lead 40 End Mill	MSX440 MUGEN-COATING POWER End Mill	MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill	Aurora Coat, Square End Mill ASM2000DL	SLE2 Slotting End Mill G2	All Purpose Square End Mill Short 2-Flute 3633	Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC
CAD
Days to Ship	16 Day(s) or more	Same day or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	2 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	2 Day(s) or more	12 Day(s) or more	12 Day(s)	16 Day(s) or more	12 Day(s) or more	Same day or more	Same day or more	12 Day(s) or more	12 Day(s) or more	Same day or more	12 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	12 Day(s) or more	12 Day(s) or more	Same day or more	12 Day(s) or more	12 Day(s) or more	10 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications		XAL General Steel 4 Flutes		XAL General Steel 4 Flutes			XAL General Steel 2 Flutes					Non-Coated General Steel				Non-Coated Aluminum 3 Flutes S (Short)							XAL General Steel 2 Flutes	TiAlN General Steel 4 Flutes S (Short)	TS General Steel 2 Flutes S (Short)	Non-Coated Aluminum 3 Flutes B (Stub)	XAL General Steel 4 Flutes
Blade diameter (D)(φ)	1 ～ 16	1 ～ 20	1 ～ 20	1 ～ 12	1 ～ 20	3 ～ 20	0.5 ～ 20	1 ～ 16	0.1 ～ 6	3 ～ 16	2 ～ 25	2 ～ 20	0.1 ～ 30	1 ～ 12	4	1 ～ 12	1 ～ 20	1 ～ 30	1 ～ 12	1 ～ 20	8 ～ 14	1 ～ 20	0.1 ～ 20	2 ～ 20	0.1 ～ 20	1 ～ 12	1.5 ～ 16	1 ～ 20	1 ～ 20	6 ～ 20	1 ～ 20	1 ～ 20	0.2 ～ 12	3 ～ 12	8 ～ 22	1 ～ 30	3 ～ 25	1.5 ～ 30	0.5 ～ 11.9	3 ～ 18	1 ～ 12	2 ～ 5	3 ～ 50	2 ～ 20	1 ～ 16
Blade length (ℓ)(mm)	1.5 ～ 24	3 ～ 60	2.5 ～ 38	4 ～ 48	3 ～ 38	7.5 ～ 50	0.75 ～ 30	3 ～ 32	0.15 ～ 9	9 ～ 48	7.5 ～ 45.5	3 ～ 60	0.2 ～ 60	3 ～ 36	11	2 ～ 24	4 ～ 80	2.5 ～ 45	2 ～ 24	2.5 ～ 40	40 ～ 70	3 ～ 60	0.3 ～ 60	6 ～ 38	0.2 ～ 40	1.5 ～ 18	3.75 ～ 40	4 ～ 80	2.5 ～ 50	25 ～ 75	1.5 ～ 30	2 ～ 40	0.8 ～ 48	5 ～ 16	12 ～ 33	2.5 ～ 45	12 ～ 67	5 ～ 55	2 ～ 47.6	8 ～ 32	4 ～ 48	6 ～ 15	8 ～ 35	-	2 ～ 32
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	0.3 ～ 50	-	-	-	-	-	-	17 ～ 50	-	-	-	3 ～ 16	-	-	-	-	17 ～ 73	3 ～ 36	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	15 ～ 80	-	-
Shank diameter (d)(mm)	4 ～ 16	4 ～ 20	3 ～ 20	4 ～ 12	6 ～ 20	6 ～ 20	4 ～ 20	4 ～ 16	4 ～ 6	6 ～ 16	6 ～ 25	4 ～ 20	4 ～ 32	4 ～ 12	6	4 ～ 12	4 ～ 20	6 ～ 32	4 ～ 12	4 ～ 20	8 ～ 16	4 ～ 20	3 ～ 20	4 ～ 20	3 ～ 20	4 ～ 12	4 ～ 16	6 ～ 20	4 ～ 20	6 ～ 20	4 ～ 20	4 ～ 20	4 ～ 12	6 ～ 12	6 ～ 20	4 ～ 32	6 ～ 25	6 ～ 32	4 ～ 12	6 ～ 20	4 ～ 12	4 ～ 6	10 ～ 32	6 ～ 20	4 ～ 16
Number of flutes(sheet)	3	4	4	4	4 ～ 8	4	2	3	2	3	4	2 ～ 4	2	2	3	3	4	4 ～ 8	4	4	2	4	2	4	2	3	4	2	4	6 ～ 8	4	4	2	2	3	4	4	4 ～ 8	2	4	4	2	2	2	2
Overall Length (L)(mm)	40 ～ 90	45 ～ 130	38 ～ 100	45 ～ 100	50 ～ 100	45 ～ 100	40 ～ 110	50 ～ 115	45 ～ 100	60 ～ 110	57 ～ 121	40 ～ 130	45 ～ 140	45 ～ 90	50	40 ～ 80	40 ～ 140	60 ～ 140	45 ～ 80	40 ～ 125	90 ～ 130	50 ～ 120	40 ～ 110	40 ～ 105	35 ～ 110	40 ～ 80	45 ～ 105	60 ～ 200	40 ～ 100	70 ～ 155	40 ～ 100	40 ～ 100	45 ～ 100	45 ～ 75	110 ～ 200	40 ～ 125	50 ～ 140	60 ～ 140	45 ～ 105	55 ～ 105	45 ～ 105	40 ～ 50	55 ～ 180	50 ～ 92	45 ～ 100
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Aluminum[◎] / Copper[◎]	general steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]	general steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎]	Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	-	Aluminum[◎] / Copper[◎]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)
Machining Application	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Plunging (Z feed) / Countersinking	Side / Groove	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	Plane / Countersinking	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking
Coating	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	DLC	-	For High Hardness (Silicon Group) / Non-Coated	For General Steels (AlCrN, etc.)	DLC	TiAlN	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	-	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	Non-Coated	For General Steels (AlCrN, etc.)	-	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN	Non-Coated	TiAlN	TiAlN	DLC	Non-Coated	-	DLC
Blade tip shape	With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	-	-	With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	-	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Micro R	With Lead	Sharp Edge	-	-	-
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

1
2
3
4
5
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

78

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

115

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear