(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 30/6/2024 sampai dengan 5:00 pada tanggal 1/7/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 (WIB) 1/7/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Carbide Ball End Mills（Machining Application：Curved surface Page2）
[What is a carbide ball end mill?]
A type of milling cutter. An end mill characterized by a bottom flute with a spherical (round) cutting edge, mainly used for cutting free-form surface shapes. Its main role is cutting molded parts. Due to the spherical cutting edge, it has features that can support various machining shapes.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
TSC series carbide ball end mill (R accuracy ±3μm)
MISUMI
[Features]
·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality
·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds
·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
MISUMI
[Features]
·Compatible with shrink fit chucks for high-precision machining
·Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill, regular model
MISUMI
[Features]
·Regular bridge length allows for many regrinding times
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
·Long shank type ideal for deep cavity milling
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill, 3-flute / short model
MISUMI
[Features]
·3-flute shape is resistant to chattering and enables high feed
·Surface coarse of workpiece after processing is very good finish.
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill, 3-flute / regular model
MISUMI
[Features]
·3-flute shape is resistant to chattering and enables high feed
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 12 Day(s) or more -
TSC Series Carbide Ball End Mill 4-Flute / Short Type
MISUMI
[Features]
·Surface coarse of workpiece after processing is very good finish.
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
TSC series carbide ball end mill, 4-flute / regular model
MISUMI
[Features]
·Surface coarse of workpiece after processing is very good finish.
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 12 Day(s) or more -
Carbide ball end mill, 2-flute / short model
MISUMI
Highly versatile due to the non-coated specification
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]
·High stiffness 2-flute type with length taper shape
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 12 Day(s) or more -
- On Sale Till 31/03/2025
TSC series carbide long neck ball end mill, 2-flute / long neck model
MISUMI
[Features]
·Long neck shape suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Special Price Days to Ship: Same day or more -
TSC series carbide long neck ball end mill, 3-flute / long neck model
MISUMI
[Features]
·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 12 Day(s) or more -
TSC series carbide long neck ball end mill, 4-flute / long neck model
MISUMI
[Features]
·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Days to Ship: 12 Day(s) or more -
MISUMI
[Features]
·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).
·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
Days to Ship: 12 Day(s) or more -
MISUMI
The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel
- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
- B (Stub)
Days to Ship: 12 Day(s) or more -
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]
·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
·Taper neck is effective in suppressing chattering
·Machining of high hardness steel up to 65HRC is possible
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Days to Ship: 12 Day(s) or more -
TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
MISUMI
Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS
- Volume Discount
- TS
- SUS
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
MISUMI
The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
MISUMI
A type for aluminum that achieves high efficiency while having the affordable uncoated design
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model
MISUMI
Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity
- Volume Discount
- CrN
- Copper
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
MISUMI
CrN coated products that are ideal for copper electrode processing are available at affordable prices
- Volume Discount
- CrN
- Copper
- 2 Flutes
Days to Ship: 12 Day(s) or more -
Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model
MISUMI
4-flute ball for graphite that achieves high feed
- Volume Discount
- DIA
- Graphite
- 4 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
MISUMI
Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
- Volume Discount
- DIA
- Graphite
- 2 Flutes
Days to Ship: 12 Day(s) or more -
Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model
MISUMI
The price of the non-coated product with excellent cost performance has been further reduced
- Volume Discount
- Non-Coated
- Graphite
- 2 Flutes
- L (Long)
Days to Ship: 12 Day(s) or more -
Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model
MISUMI
Sharp edge that's suitable for machining resin
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
MISUMI
A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 12 Day(s) or more -
MISUMI
CBN ball end mill that's ideal for precision finishing is available at a value price
- Volume Discount
- High-Hardness Steel
- 2 Flutes
Days to Ship: 12 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining- Volume Discount
Days to Ship: 12 Day(s) or more -
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model
MISUMI
High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
GS MILL Long Neck Hard Ball GSBNH2
NACHI(FUJIKOSHI)
[Features]
· Ideal for fine machining of molds.
· Available in various sizes and can be used for all kinds of machining.
· Cutting blades with a tapered back make contact with a workpiece with a shorter length.
· Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surfaceDays to Ship: 16 Day(s) or more -
X's Mill Geo Ball Long Shank 2GEOLSR
NACHI(FUJIKOSHI)
[Features]
A carbide end mill with 2 flutes.
The high cutting speed and high production efficiency lead to overall production cost reduction.
The long shank allows contouring at deep positions and can be lengthened to suit the application.
[Applications]
Suitable for side milling, curved surface milling, engraving, and R-grooving.Days to Ship: 11 Day(s) or more -
Days to Ship: 11 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.
Days to Ship: 12 Day(s) or more -
NACHI(FUJIKOSHI)
Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Days to Ship: 2 Day(s) -
Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6
OSG
Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
Coated for steel
Standard/Alteration category: Manufacturer's standard product
Number of flutes (pcs.) 2
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
R Accuracy (µm) ±10Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute MG-EBD-3
OSG
Uses high-toughness carbide with high transverse rupture strength.
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD
·Demonstrates high performance in machining high-rigid materials and cast iron
·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute CBN-SXB
OSG
Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute DIA-EBD
OSG
Allows both high-speed machining and dry cutting of aluminum. Also, great extension of tool life even in graphite processing has been achieved.
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute DIA-EBD-SF
OSG
Demonstrates excellent durability when processing graphite, aluminum, etc.
Work Material: Aluminum/Copper/Graphite
For coating non-ferrous metals (Diamond coating)
Standard/Alteration category: Manufacturer's standard product
Number of flutes (pcs.) 2
Shank diameter (mm) 6Days to Ship: 12 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model | TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model | TSC series carbide ball end mill, 2-flute / short, long shank model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | TSC series carbide long neck ball end mill, 2-flute / long neck model | TSC series carbide long neck ball end mill, 3-flute / long neck model | TSC series carbide long neck ball end mill, 4-flute / long neck model | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model | DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model | Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model | CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model | Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model | Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model | Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model | XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model | |||||||||||||||||||||||||||
| Days to Ship | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | Same day or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 2 Day(s) | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||
| R Size(mm) | 1.5 ～ 3 | 0.3 ～ 2 | 0.2 ～ 6 | 0.2 ～ 8 | 0.5 ～ 12.5 | 0.5 ～ 5 | 0.5 ～ 10 | 1 ～ 6 | 1 ～ 10 | 1.5 ～ 6 | 0.2 ～ 10 | 0.15 ～ 5 | 0.05 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 1 ～ 5 | 0.3 ～ 3 | 0.5 ～ 3 | 1 ～ 5 | 0.5 ～ 6 | 0.5 ～ 6 | 0.5 ～ 6 | 0.2 ～ 2 | 1 ～ 6 | 0.2 ～ 3 | 1 ～ 6 | 0.5 ～ 6 | 0.05 ～ 3 | 0.3 ～ 1 | 0.5 ～ 12.5 | 0.1 ～ 10 | 0.1 ～ 3 | 0.5 ～ 15 | 0.2 ～ 6 | 5 | 0.5 ～ 6 | 0.5 ～ 15 | 3 ～ 6 | 0.1 ～ 2 | 0.2 ～ 1.5 | 0.05 ～ 1.5 | 3 ～ 6 | 0.2 ～ 1.5 | 0.5 ～ 6 | 5 ～ 6 |
| Blade length (ℓ)(mm) | 4.5 ～ 9 | 0.6 ～ 4 | 0.4 ～ 12 | 1.5 ～ 30 | 2 ～ 30 | - | 2 ～ 25 | 5 ～ 22 | 3 ～ 25 | 5 ～ 22 | 0.8 ～ 25 | 0.3 ～ 8 | 0.07 ～ 8 | 0.8 ～ 4.8 | 1.6 ～ 6 | 1 ～ 5 | 0.6 ～ 6 | 0.8 ～ 4.8 | 3 ～ 15 | 1.5 ～ 18 | 1.5 ～ 18 | 1.5 ～ 18 | 0.4 ～ 4 | 4 ～ 24 | 0.6 ～ 7.5 | 10 ～ 55 | 1.5 ～ 18 | 0.07 ～ 6 | 0.5 ～ 1.2 | 1 ～ 25 | 0.4 ～ 25 | 0.2 ～ 6 | 1.5 ～ 45 | 0.4 ～ 12 | 15 | 1.5 ～ 18 | 1.5 ～ 45 | 12 ～ 22 | 0.16 ～ 3.2 | 0.8 ～ 8 | 0.2 ～ 8 | 4 ～ 7 | 0.3 ～ 1.8 | 2.5 ～ 22 | 10 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | 17 ～ 80 | 15 ～ 80 | 4 ～ 55 | 15 ～ 75 | 17 ～ 72 | 15 ～ 75 | 17 ～ 72 | - | 2 ～ 50 | 0.2 ～ 60 | 3 ～ 50 | 4 ～ 30 | 5 ～ 10 | - | 20 ～ 50 | - | 14 ～ 68 | 14 ～ 68 | - | 2 ～ 40 | - | 2 ～ 60 | 20 ～ 65 | - | 0.2 ～ 60 | 1.5 ～ 5 | 2.2 ～ 50 | - | - | 10 ～ 100 | 0.6 ～ 7.5 | - | - | 3 ～ 80 | - | 1 ～ 30 | - | - | 20 | 1.2 ～ 6 | - | - |
| Shank diameter (d)(mm) | 6 | 6 | 4 ～ 12 | 4 ～ 16 | 3 ～ 25 | 6 ～ 10 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 3 ～ 20 | 4 ～ 12 | 3 ～ 8 | 4 ～ 6 | 4 ～ 6 | 6 ～ 10 | 6 | 4 ～ 8 | 6 ～ 10 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 6 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 3 ～ 6 | 4 | 4 ～ 25 | 4 ～ 20 | 4 ～ 6 | 4 ～ 32 | 4 ～ 12 | 10 | 4 ～ 12 | 4 ～ 32 | 5 ～ 11 | 6 | 3 | 3 | 6 ～ 12 | 4 ～ 6 | 4 ～ 12 | 6 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 2 | 2 | 2 | 2 ～ 3 | 4 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 60 ～ 90 | 40 | 40 ～ 65 | 50 ～ 140 | 70 ～ 280 | 70 ～ 90 | 50 ～ 150 | 50 ～ 110 | 50 ～ 150 | 60 ～ 110 | 40 ～ 150 | 50 ～ 110 | 40 ～ 110 | 50 ～ 110 | 50 ～ 70 | 50 ～ 90 | 40 | 70 ～ 110 | 50 ～ 100 | 50 ～ 110 | 50 ～ 110 | 50 ～ 120 | 50 ～ 110 | 50 ～ 80 | 50 ～ 110 | 100 ～ 200 | 50 ～ 120 | 50 ～ 110 | 50 | 40 ～ 180 | 50 ～ 150 | 45 ～ 120 | 80 ～ 230 | 50 ～ 110 | 100 | 50 ～ 120 | 50 ～ 200 | 120 ～ 160 | 50 ～ 100 | 40 | 40 | 90 ～ 110 | 45 ～ 50 | 60 ～ 140 | 32 ～ 34 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] |
| R Precision(μm) | -0.005 ~ +0.001 ～ ±0.003 | ±0.003 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | -0.005 ~ +0.001 ～ ±0.003 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.005 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | ±5 ～ ±10 | ±0.005 ～ ±0.01 | - | 0～-0.04 ～ 0～-0.03 | - | -0.01～+0.01 | -0.003～+0.003 | 0～-0.04 ～ 0～-0.03 | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | - | -0.01～+0.01 | -0.005～+0.005 | - | - |
| Machining Application | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | Non-Coated | CrN | CrN | Dia Coat | Dia Coat | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | For High Hardness (Silicon Group) | MRC | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Dia Coat | Dia Coat |
| Type | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball / Spherical Ball | Ball | Ball | Ball | Ball | Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Tapered neck ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball |
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.27
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.35
- 0.37
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.35
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.2
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
30～30.5
- 30
- 30.5
-
31
-
32
-
34
-
35
-
36
-
38
-
40
-
41.5
-
45
-
48
-
50
-
53
-
55
-
58
-
60
-
65
-
66
-
70
-
80
-
90
-
100
-
110
-
120
-
130
[5-30/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- OSG (59)
- NS TOOL (36)
- DIJET (16)
- UNION TOOL (16)
- EIKOSHA (9)
- KYOWA SEIKO (9)
- NACHI(FUJIKOSHI) (9)
- MITSUBISHI HITACHI TOOL (7)
- OKAZAKI SEIKO (6)
- SANKO MFG (6)
- THE CUT (5)
- 7 LEADERS (4)
- ATOM (3)
- ASAHI TOOLS (2)
- CREATE TOOL (1)
- KYOCERA (1)
- MITSUBISHI MATERIALS (1)
- Poulten&Graf (1)
- SANDVIK (1)
- WIDIN (1)
- GUHRING (0)
- MAPAL (0)
- VAN HOORN (0)
- TOYO DRILL (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
CAD
-
- 2D
- 3D
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy