(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Carbide Ball End Mills（Machining Application：Curved surface）
[What is a carbide ball end mill?]
A type of milling cutter. An end mill characterized by a bottom flute with a spherical (round) cutting edge, mainly used for cutting free-form surface shapes. Its main role is cutting molded parts. Due to the spherical cutting edge, it has features that can support various machining shapes.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionDays to Ship: 12 Day(s) or more -
Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)
SANDVIK
High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura profiling carbide ball end mill
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
·CBN ball end mill.
·Suitable for high-speed finishing of high-hardness material dies.Days to Ship: 16 Day(s) or more -
Ball End Type, 3-Flute PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Days to Ship: 12 Day(s) or more -
SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank
SANKO MFG
Machining is possible with a wide range of materials, from raw materials to hardened steel. The long shank allows for machining in deep sections.
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute WXL-EBD
OSG
[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.Days to Ship: 2 Day(s) or more -
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionDays to Ship: 12 Day(s) or more -
Epoch Deep Ball Evolution (PN Coating) EPDBE2-PN
MITSUBISHI HITACHI TOOL
The inclination is suppressed and the high-precision machining is achieved by improving the shape of the blade tip and neck. Even longer lifespan processing is obtained by adopting ATH & PN coating.
Days to Ship: 12 Day(s) or more -
Carbide 2-Flute Short Ball End Mill 30° B222X
7 LEADERS
[Features]
· 2-flute short ball end mill that supports a wide range of work materials.
· Capable of continuous stable cutting.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.Days to Ship: 10 Day(s) or more -
Ball End Type, 2-Flute DIA-PC-EBD
OSG
Pencil neck ball supports ultra-deep milling of graphite electrodes. Ultra-microcrystalline diamond coating realizes dramatic extension of tool life.
Days to Ship: 16 Day(s) or more -
Pencil-Neck Type, 3-Flute PHX-PC-DBT
OSG
Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.
Days to Ship: 12 Day(s) or more -
MSBH230 2-Flute Ball-End Mill for High-Hardness
NS TOOL
Standard type ball end mill for high hardness. Ideal for finishing
Days to Ship: 12 Day(s) or more -
SAGCBE SA Coating Carbide 2-Flute Ball-Nose
SANKO MFG
[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· Also capable of high-speed machining.Days to Ship: 16 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: 12 Day(s) or more -
WIDIN
[Features]
· Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.Days to Ship: 12 Day(s) or more -
XAC series carbide ball end mill, 2-flute / short model
MISUMI
[Features]
·General purpose 2-blade ball end mill for wide range of profiling
·For surface coarse of workpiece, good surface finish can be expected after machining.
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
MISUMI
[Features]
·High-feed, high stiffness 3-flute taper shape with taper length
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 12 Day(s) or more -
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model
MISUMI
The user friendly regular flute length type is released simultaneously
- Volume Discount
- MR
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute WXS-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.
Days to Ship: 2 Day(s) or more -
SSBL200 CBN Super Speed Long Neck Ball End Mill
NS TOOL
Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
Days to Ship: 12 Day(s) or more -
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.
Days to Ship: 12 Day(s) or more -
![Epoch Panacea Ball Regular Flute Length HGOB2□□□(-□)-PN [Alteration Supported Product]](//id.misumi-ec.com/linked/material/fs/HCT1/PHOTO/hgob.jpg?$product_view_b$)
Epoch Panacea Ball Regular Flute Length HGOB2□□□(-□)-PN [Alteration Supported Product]
MITSUBISHI HITACHI TOOL
[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.
Provides machining surface accuracy across a wide area, suppressing chattering even during high-speed machiningDays to Ship: 12 Day(s) or more -
- On Sale Till 31/03/2025
(Economy series) XAL series carbide ball end mill, 2-flute / short model
MISUMI
XAL Series is the definitive choice for cost-sensitive customers
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Special Price Days to Ship: Same day or more -
XAC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
·For surface coarse of workpiece, good surface finish can be expected after machining.
·Long shank type, ideal for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
Days to Ship: 12 Day(s) or more -
TSC Series Carbide Ball End Mill 2-Flute / Short Type
MISUMI
[Features]
·Good finish can be expected for surface coarse of workpiece after processing
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 12 Day(s) or more -
Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute
MISUMI
Diamond coated products that exert tremendous durability are available in the industry's lowest price
- Volume Discount
- DIA
- Graphite
- 2 Flutes
- L (Long)
Days to Ship: 12 Day(s) or more -
- On Sale Till 31/03/2025
(Economy series) XAL Series Carbide Ball End Mill, 2-Flute / Regular Model
MISUMI
The regular flute length type is introduced in the low-price and popular XAL balls
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Special Price Days to Ship: Same day or more -
Long Neck for Copper Work, Ball CURIBR
NACHI(FUJIKOSHI)
Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute for Graphite DG-EBD
OSG
End mill with diamond coating dedicated for graphite.
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute CRN-EBD-3
OSG
A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute DIA-EBD
OSG
Allows both high-speed machining and dry cutting of aluminum. Also, great extension of tool life even in graphite processing has been achieved.
Days to Ship: 12 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD
OSG
Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.
Days to Ship: 16 Day(s) or more -
Ball End Type, 2-Flute GX-EBD-SF
OSG
Carbide mushroom type ball end mill developed for shrink fitting.
Days to Ship: 12 Day(s) or more -
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
Days to Ship: 2 Day(s) or more -
Ball End Type, 2-Flute WXL-PC-EBD
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applicationsDays to Ship: 2 Day(s) or more -
Ball-End Type, 2-Flute For finishing FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
Days to Ship: 16 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
Days to Ship: 2 Day(s) -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeDays to Ship: 16 Day(s) or more -
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](//id.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]
UNION TOOL
[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.Days to Ship: 16 Day(s) or more -
SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining
NS TOOL
The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics
Days to Ship: 16 Day(s) or more -
- On Sale Till 31/03/2025
MSB230 MUGEN-COATING 2-Flute Ball End Mill
NS TOOL
Supports three-dimensional precision machining from low to high speeds
Special Price Days to Ship: Same day or more -
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.Days to Ship: 12 Day(s) or more -
Epoch Pencil Deep Ball Evolution EPDBPE2□□□□-□□□.□-□□-ATH
MITSUBISHI HITACHI TOOL
Increased variations of neck angle and under-neck length to support all deep rib processing.
[Features]
· Pencil deep ball became new.
· Neck tapered half-width, variation of under-neck length is added.Days to Ship: 12 Day(s) or more -
Standard Ball End Mill, 4-Flute
ATOM
Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.
Days to Ship: 12 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: 16 Day(s) or more
![Epoch Panacea Ball Regular Flute Length HGOB2□□□(-□)-PN [Alteration Supported Product]](http://id.misumi-ec.com/linked/material/fs/HCT1/PHOTO/hgob.jpg?$product_view_b$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://id.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | SANDVIK | NACHI(FUJIKOSHI) | OSG | SANKO MFG | OSG | UNION TOOL | MITSUBISHI HITACHI TOOL | 7 LEADERS | OSG | OSG | NS TOOL | SANKO MFG | DIJET | WIDIN | MISUMI | MISUMI | MISUMI | OSG | NS TOOL | NS TOOL | MITSUBISHI HITACHI TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | UNION TOOL | MITSUBISHI HITACHI TOOL | ATOM | DIJET |
| Product Series | Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63) | TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model | Epoch Panacea Ball Regular Flute Length HGOB2□□□(-□)-PN [Alteration Supported Product] | (Economy series) XAL series carbide ball end mill, 2-flute / short model | XAC series carbide ball end mill, 2-flute / short, long shank model | Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute | (Economy series) XAL Series Carbide Ball End Mill, 2-Flute / Regular Model | CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product] | SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining | |||||||||||||||||||||||||||||||||||
| Days to Ship | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 2 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 2 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | Same day or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | Same day or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 16 Day(s) or more | 2 Day(s) | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | Same day or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
| R Size(mm) | 0.03 ～ 6 | 0.5 ～ 8 | 0.2 ～ 1 | 0.5 ～ 10 | 1.5 ～ 12.5 | 0.05 ～ 10 | 0.05 ～ 3 | 0.05 ～ 3 | 0.15 ～ 10 | 0.5 ～ 3 | 0.5 ～ 6 | 0.05 ～ 6 | 0.3 ～ 12.5 | 0.5 ～ 10 | R0.75 ～ R10 | 0.2 ～ 12.5 | 0.5 ～ 3 | 0.2 ～ 8 | 0.5 ～ 8 | 0.05 ～ 1 | 0.1 ～ 3 | 0.15 ～ 10 | 0.05 ～ 10 | 2 ～ 8 | 0.05 ～ 10 | 0.5 ～ 6 | 0.2 ～ 8 | 0.1 ～ 3 | 2 ～ 6 | 0.1 ～ 1.5 | 0.5 ～ 6 | 0.5 ～ 15 | 5 ～ 10 | 0.6 ～ 0.7 | 0.1 ～ 6 | 0.5 ～ 6 | 0.05 ～ 3 | 1.5 ～ 6 | 0.2 ～ 6 | 0.01 ～ 0.05 | 0.05 ～ 6 | 0.1 ～ 6 | 0.1 ～ 6 | 0.5 ～ 10 | 1 ～ 15 |
| Blade length (ℓ)(mm) | 0.06 ～ 22 | 2 ～ 15 | 0.3 ～ 1.4 | 1.5 ～ 30 | 4.5 ～ 80 | 0.2 ～ 38 | 0.08 ～ 4.8 | 0.08 ～ 6 | 0.6 ～ 38 | 2.5 ～ 12 | 1.5 ～ 18 | 0.1 ～ 20 | 0.9 ～ 50 | 1.5 ～ 30 | 4 ～ 38 | 0.8 ～ 50 | 0.8 ～ 6 | 1.5 ～ 30 | 1 ～ 24 | 0.08 ～ 1.2 | 0.6 ～ 30 | 0.6 ～ 38 | 0.2 ～ 38 | 8 ～ 30 | 0.2 ～ 25 | 3 ～ 55 | 1.5 ～ 48 | 0.2 ～ 6 | 8 ～ 60 | 0.4 ～ 8 | 2.5 ～ 22 | 2.5 ～ 55 | 10 ～ 20 | 3 ～ 3.5 | 0.16 ～ 12 | 1 ～ 12 | 0.08 ～ 6 | 4.5 ～ 25 | 0.8 ～ 55 | 0.02 ～ 0.1 | 0.1 ～ 20 | 0.3 ～ 18 | 0.15 ～ 22 | 3 ～ 40 | 4 ～ 70 |
| Underneck length (ℓ1)(mm) | - | 20 ～ 61 | 1.2 ～ 5.5 | - | - | - | 0.3 ～ 60 | 0.2 ～ 50 | - | 30 ～ 150 | 6 ～ 160.8 | - | - | 3 ～ 12.5 | - | - | 7 ～ 60 | - | 2 ～ 10 | 0.3 ～ 10 | 2 ～ 80 | 0.9 ～ 11 | - | - | 15 ～ 75 | 20 ～ 65 | - | 0.5 ～ 35 | - | - | - | - | - | - | 1 ～ 80 | 2.5 ～ 30 | 0.3 ～ 50 | - | - | - | - | - | 1 ～ 120 | - | - |
| Shank diameter (d)(mm) | 4 ～ 12 | 6 ～ 16 | 4 ～ 6 | 6 ～ 20 | 3 ～ 25 | 4 ～ 20 | 3 ～ 6 | 4 ～ 6 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 3 ～ 25 | 4 ～ 20 | 3 ～ 20 | 3 ～ 25 | 4 ～ 8 | 4 ～ 16 | 4 ～ 16 | 4 | 3 ～ 6 | 4 ～ 20 | 3 ～ 20 | 4 ～ 16 | 3 ～ 20 | 4 ～ 12 | 4 ～ 16 | 4 ～ 6 | 4 ～ 12 | 3 | 4 ～ 12 | 4 ～ 25 | 6 ～ 12 | 4 | 4 ～ 16 | 6 ～ 12 | 3 ～ 6 | 3 ～ 12 | 4 ～ 12 | 4 | 4 ～ 12 | 4 ～ 12 | 4 ～ 16 | 4 ～ 20 | 4 ～ 32 |
| Number of flutes(sheet) | 2 | 2 ～ 4 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 110 | 75 ～ 150 | 50 | 60 ～ 200 | 100 ～ 230 | 40 ～ 160 | 45 ～ 120 | 45 ～ 100 | 50 ～ 100 | 100 ～ 220 | 60 ～ 220 | 50 ～ 100 | 50 ～ 180 | 50 ～ 180 | 50 ～ 160 | 40 ～ 180 | 50 ～ 110 | 50 ～ 140 | 50 ～ 140 | 50 ～ 53 | 50 ～ 130 | 50 ～ 160 | 40 ～ 160 | 100 ～ 250 | 40 ～ 150 | 50 ～ 200 | 50 ～ 140 | 45 ～ 80 | 80 ～ 200 | 40 | 60 ～ 140 | 50 ～ 180 | 32 ～ 58 | 50 | 45 ～ 160 | 50 ～ 80 | 45 ～ 120 | 80 ～ 200 | 60 ～ 200 | 50 | 50 ～ 110 | 50 ～ 110 | 50 ～ 200 | 40 ～ 105 | 140 ～ 250 |
| work material | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC60[○] | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[◎] | Aluminum[○] / Graphite[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Graphite[○] |
| R Precision(μm) | -0.007～0.007 ～ -0.002～0.002 | - | - | -0.01～+0.01 | 0～-0.03 | -0.007 to 0.003 ～ ±0.01 | -0.005～0.005 ～ -0.002～0.002 | -0.005～0.005 ～ -0.003～0.003 | ±10 | - | - | 0.005～-0.005 ～ 0.01～-0.01 | 0～-0.03 | 5～-5 ～ 10～-10 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 ～ ±0.01 | -0.01～+0.01 ～ -0.005～+0.005 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | -0.01～0.01 ～ -0.005～0.005 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007～+0.003 | -0.01～+0.01 | -0.01～+0.01 | - | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005 to +0.005 ～ -0.005～+0.005 | -0.01～+0.01 | -0.005～+0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.01～0.01 | - | 0.005～-0.005 ～ 0.01～-0.01 | -0.007～0.007 ～ -0.005～0.005 | -0.01～0.01 ～ -0.003～0.003 | ±0.01 | - |
| Machining Application | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface |
| Coating | For High Hardness (Silicon Group) | Other | - | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | - | Dia Coat | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | MRC | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | Dia Coat | For General Steels (AlCrN, etc.) | CrN | DG | CrN | Dia Coat | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiAlN | TiCN | For High Hardness (Silicon Group) | Non-Coated | Non-Coated |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Tapered neck ball | Ball | Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Tapered neck ball | Ball | Ball |
![Epoch Panacea Ball Regular Flute Length HGOB2□□□(-□)-PN [Alteration Supported Product]](http://id.misumi-ec.com/linked/material/fs/HCT1/PHOTO/hgob.jpg?$product_view_c$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://id.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.27
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.35
- 0.37
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.35
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.2
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
30～30.5
- 30
- 30.5
-
31
-
32
-
34
-
35
-
36
-
38
-
40
-
41.5
-
45
-
48
-
50
-
53
-
55
-
58
-
60
-
65
-
66
-
70
-
80
-
90
-
100
-
110
-
120
-
130
[5-30/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- OSG (59)
- NS TOOL (36)
- DIJET (16)
- UNION TOOL (16)
- EIKOSHA (9)
- KYOWA SEIKO (9)
- NACHI(FUJIKOSHI) (9)
- MITSUBISHI HITACHI TOOL (7)
- OKAZAKI SEIKO (6)
- SANKO MFG (6)
- THE CUT (5)
- 7 LEADERS (4)
- ATOM (3)
- ASAHI TOOLS (2)
- CREATE TOOL (1)
- KYOCERA (1)
- MITSUBISHI MATERIALS (1)
- Poulten&Graf (1)
- SANDVIK (1)
- WIDIN (1)
- GUHRING (0)
- MAPAL (0)
- VAN HOORN (0)
- TOYO DRILL (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
CAD
-
- 2D
- 3D
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy