Inserts (for Milling)（Page7）

• 

  Kyocera Milling Tip PR1510 PVD Coating

  KYOCERA

  [Features]
  · PR1510: Uses "MEGACOAT NANO", a special nano-laminated coating with superior wear resistance and heat resistance.
  · Gray cast iron and ductile cast iron machining achieves superior fracture resistance and wear resistance.
  [Applications]
  · For Milling
  · PR1510: For milling of gray cast iron and ductile cast iron

  Days to Ship:	12 Day(s) or more

• 

  Kyocera Milling Tip PR1525 PVD Coating

  KYOCERA

  [Features]
  · PR1525: Uses "MEGACOAT NANO", a special nano-laminated coating with superior wear resistance and heat resistance.
  · Realizes a stable service life when milling steel and stainless steel.
  [Applications]
  · For Milling
  · PR1525: For steel and stainless steel milling

  Days to Ship:	12 Day(s)

• 

  Kyocera Milling Tip PR1535 PVD Coating

  KYOCERA

  [Features]
  · PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.
  · Compatible with milling of Ti alloy and precipitation hardened stainless steel.
  [Applications]
  · For Milling
  · PR1535: For milling of Ti alloy and precipitation hardened stainless steel

  Days to Ship:	8 Day(s) or more

• 

  Kyocera Milling Tip CA6535 CVD Coating

  KYOCERA

  [Features]
  · CA6535: CVD grade for milling with improved stability thanks to the use of thin film.
  · Exhibits high heat resistance and abrasion resistance.
  · Applicable to Ni-based heat-resistant alloy and martensitic stainless steel milling.
  [Applications]
  · For Milling
  · CA6535: Milling of Ni-base heat-resistant alloy and martensitic stainless steel

  Days to Ship:	Quote

• 

  Kyocera Milling Tip PR1535 PVD Coating

  KYOCERA

  [Features]
  · PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.
  · Compatible with milling of Ti alloy and precipitation hardened stainless steel.
  [Applications]
  · For Milling
  · PR1535: For milling of Ti alloy and precipitation hardened stainless steel

  Days to Ship:	12 Day(s)

• 

  Tip for Sandvik Coro-Mill 365 K20W

  SANDVIK

  [Features]
  · CORO-MILL 365 tip.
  · Thick tip is unlikely to chip.
  · Uniquely designed 8-corner tip for double-sided use, effective in cost reduction.
  [Applications]
  · For heavy face milling.

  Days to Ship:	12 Day(s)

• 

  Tip for Sandvik Coro-Mill 200 1025

  SANDVIK

  [Features]
  · CoroMill 200 Tip
  · Precision Grade
  · Round Tip
  · Low Resistance and Good Chip Processing
  · Stable Long Service Life
  · Coated carbide tip.
  [Applications]
  · For Milling
  · For profiling
  · Mold Processing
  · Light Cutting

  Days to Ship:	Quote

• 

  Sandvik Milling Cutter Tip SMA

  SANDVIK

  [Features]
  · Milling tip
  · Carbide tip
  · Precision Grade
  [Applications]
  · For Side Cutters
  · For General Steel Processing

  Days to Ship:	8 Day(s) or more

• 

  Tungaloy, Solid End Mill COAT

  TUNGALOY

  [Features]
  · Interchangeable tip type solid end mill that enables the blade to be interchanged easily and with high precision. In addition to the square, radius, and bowl E/M types, diverse variations such as tools for drilling (center drill), chamfering, grooving, etc. are available.

  Days to Ship:	Quote

• 

  Iscar, X Parts

  ISCAR

  Days to Ship:	12 Day(s)

• 

  ISCAR A Heli 2000 / Chip COAT

  ISCAR

  [Features]
  · 7 mm compact insert and pocket design achieve high feed even with small diameter size.
  · Variety of end mills with same diameter and coarse pitch / fine pitch. Achieves the highest multi-flute specifications in its class, enabling high efficiency cutting.
  · The support of all insert faces provides a good finished surface and high stability.

  Days to Ship:	12 Day(s)

• 

  ISCAR Shred mill chip 1806PDR-FW IC808

  ISCAR

  ISCAR MILLSHRED insert 1806PDR-FW IC808
  [Features]·Latest insert for serration cutting edge
  ·Good chip discharge during machining.
  It also supports deep grooving.
  ·The high chip discharge performance greatly suppresses chattering during machining even when machining with a long overhang.
  It demonstrates high effectiveness.

  Days to Ship:	12 Day(s)

• 

  ISCAR Shred mill chip 1806PDR-FWE IC330

  ISCAR

  ISCAR MILLSHRED insert 1806PDR-FWE IC330
  [Features]·Latest insert for serration cutting edge
  ·Good chip discharge during machining.
  It also supports deep grooving.
  ·The high chip discharge performance greatly suppresses chattering during machining even when machining with a long overhang.
  It demonstrates high effectiveness.

  Days to Ship:	12 Day(s)

• 

  ISCAR Shred mill chip 1806PDR-FWE IC380

  ISCAR

  ISCAR MILLSHRED insert 1806PDR-FWE IC380
  [Features]·Latest insert for serration cutting edge
  ·Good chip discharge during machining.
  It also supports deep grooving.
  ·The high chip discharge performance greatly suppresses chattering during machining even when machining with a long overhang.
  It demonstrates high effectiveness.

  Days to Ship:	12 Day(s)

• 

  ISCAR Shred mill chip 1806PDR-FWE IC830

  ISCAR

  [Features]
  · Serrated blade milling tool

  Days to Ship:	12 Day(s)

• 

  ISCAR Shred mill chip 1806PDR-HL IC830

  ISCAR

  ISCAR MILLSHRED insert 1806PDR-HL IC830
  [Features]·Latest insert for serration cutting edge
  ·Good chip discharge during machining.
  It also supports deep grooving.
  ·The high chip discharge performance greatly suppresses chattering during machining even when machining with a long overhang.
  It demonstrates high effectiveness.

  Days to Ship:	12 Day(s)

• 

  ISCAR C Other Mealing/Chip COAT

  ISCAR

  [Features]
  · MULTI-MASTER
  · Various types of machining are made possible by attaching heads with different shape specifications to a holder of the same size, using a blade indexable end mill
  · Head replacement is easy, enabling shortening of tool exchange time
  [Applications]
  · Suitable for milling/grooving (T-type slitter)
  · Sharp Cutting Edge Type

  Days to Ship:	Quote

• 

  MULTI-MASTER MM GRIT (Groove Machining Tool for MC)

  ISCAR

  [Features]
  · MULTI-MASTER
  · Various types of machining are made possible by attaching heads with different shape specifications to a holder of the same size, using a blade indexable end mill
  · Head replacement is easy, enabling shortening of tool exchange time
  [Applications]
  · Suitable for milling/grooving (T-type slitter)

  Days to Ship:	Quote

• 

  ISCAR C Multi Master Tap COAT

  ISCAR

  [Features]
  · MULTI-MASTER
  · Various types of machining are made possible by attaching heads with different shape specifications to a holder of the same size, using a blade indexable end mill
  · Head replacement is easy, enabling shortening of tool exchange time
  [Applications]
  · Suitable for milling / grooving / one-sided cutting

  Days to Ship:	12 Day(s)

• 

  ISCAR C HeliDo / Chip X COAT

  ISCAR

  [Features]
  · Can be used with 8 corners.
  · It is economical due to the use of more corners than a regular insert.

  Days to Ship:	12 Day(s)

• 

  ISCAR C Other Milling / Tip, COAT, Shred Mill

  ISCAR

  [Features]
  · Insert for Thread Milling
  [Applications]
  · Milling processing chip

  Days to Ship:	12 Day(s) or more

• 

  ISCAR C Other Mealing/Chip COAT

  ISCAR

  [Features]
  · Round Insert
  [Applications]
  · Milling processing chip

  Days to Ship:	50 Day(s) or more

• 

  ISCAR C Tip, COAT, Sumo Mill, Vertical 2 Corner Tip

  ISCAR

  [Features]
  · Vertical Type Insert Structure High-Rigidity Insert Type End Mill
  [Applications]
  · Milling

  Days to Ship:	12 Day(s) or more

• 

  ISCAR C Tip, COAT, Heritang

  ISCAR

  [Features]
  · Vertical Type Insert Structure High-Rigidity Insert Type End Mill
  [Applications]
  · Milling

  Days to Ship:	12 Day(s) or more

• 

  ISCAR C Heli Tang / Chip X COAT

  ISCAR

  [Features]
  · Vertical Type Insert Structure High-Rigidity Insert Type End Mill
  [Applications]
  · Milling

  Days to Ship:	12 Day(s)

• 

  ISCAR C Tip, COAT, WOLH05 (for DZ)

  ISCAR

  A dry type plated insert for DZ drills. Each cutting edge corner angle is 110° and there is a wiper part, which increases the cutting edge strength and at the same time improves the machined surface roughness, obtains a high feed rate and a high chip discharge amount, and has excellent cutting balance, straight-line motion, and rigidity.

  Days to Ship:	12 Day(s) or more

• 

  ISCAR A Heliquad / Chip COAT

  ISCAR

  [Features]
  · Milling Insert
  [Applications]
  · For milling

  Days to Ship:	8 Day(s)

• 

  Kyocera Turning Insert PV720 PVD Cermet

  KYOCERA

  [Features]
  · PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
  · Realizes both high-efficiency machining and a high-grade finished surface.
  [Applications]
  · For lathe turning
  · PV720: The foremost recommended PVD cermet for steel machining

  Days to Ship:	12 Day(s)

• 

  Sandvik T-Max P Negative Tip Shank Bit

  SANDVIK

  [Features]
  · The first recommended turning tool for outer diameter roughing and finishing, it has a negative insert and center hole, allowing speedy and accurate indexing.
  [Applications]
  · Outer diameter turning/negative insert supported.
  · Support from rough machining to finish machining.

  Days to Ship:	16 Day(s) or more

• 

  Sandvik T-Max P Positive Tip Shank Bit

  SANDVIK

  [Features]
  · The first recommended turning tool for outer diameter roughing and finishing, it has a negative insert and center hole, allowing speedy and accurate indexing.
  [Applications]
  · Outer diameter turning/negative insert supported.
  · Support from rough machining to finish machining.

  Days to Ship:	12 Day(s)

• 

  Sandvik U-Max, Tip for Ball End Mill SM30

  SANDVIK

  [Features]
  · Tip for U-Max endmills
  · Low Cutting Resistance
  · Coated carbide tip.
  [Applications]
  · Drilling
  · End Mill Processing

  Days to Ship:	8 Day(s) or more

• 

  Tip for Sandvik Coro-Mill 390 1010

  SANDVIK

  [Features]
  · CORO-MILL 390 tip.
  · Has a sharp cutting edge for low resistance.
  · The blade tip has an accurate torsional design to achieve the closest possible dimensional accuracy to a precision polished solid tool.
  [Applications]
  · For face milling, shoulder cutting, grooving.
  · A tip for universal cutter that can be used for any kind of machining and material.

  Days to Ship:	8 Day(s) or more

• 

  Tip for Sandvik Coro-Mill 390 2030

  SANDVIK

  [Features]
  · CORO-MILL 390 tip.
  · Has a sharp cutting edge for low resistance.
  · The blade tip has an accurate torsional design to achieve the closest possible dimensional accuracy to a precision polished solid tool.
  [Applications]
  · For face milling, shoulder cutting, grooving.
  · A tip for universal cutter that can be used for any kind of machining and material.

  Days to Ship:	8 Day(s) or more

• 

  Tip for Sandvik Coro-Mill 390 4220

  SANDVIK

  [Features]
  · CORO-MILL 390 tip.
  · Has a sharp cutting edge for low resistance.
  · The blade tip has an accurate torsional design to achieve the closest possible dimensional accuracy to a precision polished solid tool.
  [Applications]
  · For face milling, shoulder cutting, grooving.
  · A tip for universal cutter that can be used for any kind of machining and material.

  Days to Ship:	8 Day(s) or more

• 

  Tip for Sandvik Coro-Mill 390 S30T

  SANDVIK

  [Features]
  · CORO-MILL 390 tip.
  · Has a sharp cutting edge for low resistance.
  · The blade tip has an accurate torsional design to achieve the closest possible dimensional accuracy to a precision polished solid tool.
  [Applications]
  · For face milling, shoulder cutting, grooving.
  · A tip for universal cutter that can be used for any kind of machining and material.

  Days to Ship:	8 Day(s) or more

• 

  Insert 530 for Sandvik CoroMill 200

  SANDVIK

  [Features]
  · CoroMill 200 Tip
  · Round Tip
  · Low Resistance and Good Chip Processing
  · Stable Long Service Life
  · Coated carbide tip.
  [Applications]
  · For Milling
  · For profiling
  · Mold Processing
  · Medium to Rough Machining

  Days to Ship:	12 Day(s)

• 

  Tungsten Alloy Class C.E for Rotating Tools

  TUNGALOY

  Days to Ship:	12 Day(s)

• 

  Tungsten Alloy Class K.M for Rotating Tools

  TUNGALOY

  ·Insert for high feed machining
  [Product Specifications]
  ·Corner radius: 2
  ·Maximum depth of cut (mm): 1.5

  Days to Ship:	12 Day(s)

• 

  Tungsten Alloy TDS Cartridge Set

  TUNGALOY

  Cartridge set for outer edge and inner edge.
  [Features]
  ·Tool diameter adjustable type.
  ·L/D=2.5.
  ·Tool diameter: ⌀55-80 (55-80 mm diameter).
  [Applications]
  ·For tongue drill big.

  Days to Ship:	12 Day(s) or more

• 

  Tungsten Alloy TAC Face Mill

  TUNGALOY

  A face milling cutter for high-precision wall processing with screw fastening.
  [Features]
  ·Bore type cutter lead angle: 90°.
  ·TPA06: Uses TOMT06 type insert.
  ·TPA10: Uses TOMT10 type insert.
  ·TPA15: TOMT15 type insert is used.
  [Applications]
  ·For screwing type right angle shoulder processing.

  Days to Ship:	12 Day(s) or more

• 

  Tungsten Alloy TAC Drill Insert

  TUNGALOY

  Double-sided insert for milling.
  [Features]
  ·A type that can be used for inserts with 6 corners and can be set with a DJ type breaker.
  ·The set material type is the model number: Coated on AH9030.
  ·Part Number: WWMU05 × 205R-DJ-AH9030, part number: Available in two patterns, WWMU060306R-DJ-AH9030.
  ·Inserts with general-purpose grades.
  [Applications]
  ·Can be used as an indexable drill for TAC drills.
  ·Ideal for general-purpose type inserts.

  Days to Ship:	12 Day(s) or more

• 

  For Tungsten Alloy TAC Drills

  TUNGALOY

  Insert for TAC drill.
  [Features]
  ·XPMT-DJ: With a general-purpose DJ breaker.
  ·XPMT-DW: With DW chipbreaker for high feed machining.
  [Applications]
  ·For tongue drill big.

  Days to Ship:	12 Day(s) or more

• 

  Tungsten Alloy Specialty Piece for Rotating Tools

  TUNGALOY

  Insert with general-purpose MJ chipbreaker.
  [Features]
  ·ZFB-MJ: Ball type insert.
  ·ZFR-MJ: Radius type insert.
  [Applications]
  ·ZFB-MJ: Ideal for mold finishing and curved surface machining.
  ·ZFR-MJ: Ideal for finishing molds.

  Days to Ship:	12 Day(s) or more

• 

  ISCAR C Chip COAT

  ISCAR

  [Features]
  · Milling Insert
  [Applications]
  · For milling

  Days to Ship:	12 Day(s) or more

• 

  WAVY MILL NWEX2000F Chip

  NACHI(FUJIKOSHI)

  [Features]
  With an air hole, it is suitable for high efficiency side milling of everything from steel to aluminum.

  Days to Ship:	10 Day(s) or more

Loading...