(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

  • Update Stock
  • Highlight from Us
Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Quote

Part Number Checker

?

This translation is a Google translation Terjemahan ini adalah terjemahan Google

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 sampai dengan 20:00 pada tanggal 16/6/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (WIB) 16/6/2024. We apologize for the inconvenience.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

  • How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

    How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

    CommentsSaran
    Name (Optional)Nama (tidak wajib)
    E-mail Address (Optional)E-mail (tidak wajib)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy     Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
    Kebijakan Privacy

    Thank you for your cooperation.Terima kasih atas kerjasama anda.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.
    Customer Privacy Policy     Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
    Silahkan pergunakan Forms Permintaan.
    Kebijakan Privacy

Thread Cutters（Hole type：For blind hole）

A thread mill is a cutter that uses an NC milling machine or machining center to machine internal threads. It processes internal threads by performing helical interpolation upon a pilot hole. Milling makes high-accuracy machining possible. In addition, since there is little cutting resistance, there are few problems with breaking, and even if breakage occurs, extraction can be performed easily. Many thread mills are made of carbide, and some coated thread mills are compatible with high-hardness steel, which is difficult to tap. With the same thread pitch, various thread diameters can be machined by changing the program. There are also mills that can perform pilot hole drilling and thread cutting with a single thread mill.

15 items

30
45
60
Days to Ship
  • All
  • 2 Day(s) or Less
  • 12 Day(s) or Less
  • 15 Day(s) or Less
  • 16 Day(s) or Less
  • 18 Day(s) or Less
  • 20 Day(s) or Less
  • 27 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Coating Type
Coating Y/N
Overall Length (L)(mm)

    TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

      TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

        TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

          Planet Cutter Series MC - Planet Cutter PNGT

            Planet Cutter Series NC Planet Cutter WX-PNC

              Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                  TS Coated Carbide Threading Cutter, for Internal Metric Threads

                    Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                      Planet Cutter Series Super Planet DR-PNAC

                        Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                          Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                            Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                              Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                                Thread Cutting Tool (for Unified Threads) MMTU

                                Brand

                                MISUMI

                                MISUMI

                                MISUMI

                                OSG

                                OSG

                                OSG

                                MISUMI

                                MISUMI

                                OSG

                                OSG

                                OSG

                                GUHRING

                                GUHRING

                                YAMAWA MFG

                                NS TOOL

                                Product Series

                                TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                                TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

                                Planet Cutter Series MC - Planet Cutter PNGT

                                Planet Cutter Series NC Planet Cutter WX-PNC

                                Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                Planet Cutter Series Super Planet DR-PNAC

                                Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                                Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                                Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                                Thread Cutting Tool (for Unified Threads) MMTU

                                Days to Ship 18 Day(s) or more 12 Day(s) or more 18 Day(s) or more 12 Day(s) or more 2 Day(s) or more 12 Day(s) or more 12 Day(s) or more 16 Day(s) or more 12 Day(s) or more 2 Day(s) or more 2 Day(s) 27 Day(s) or more 16 Day(s) or more 12 Day(s) or more 16 Day(s) or more
                                Screw size (Nominal)M2 ～ M12M3 ～ M20M1.4 ～ M20---M3 ～ M16M3 ～ M12-M6 ～ M12M6 ～ M12M6 ～ M20M6 ～ M2006510X28R ～ 200505N300MNO.0-80UNF ～ 1/4-20UNC
                                Screw TypesMeterMeterMeterMeter / Taper for Pipe / Parallel for PipesMeter / unified / Taper for PipeMeterMeterMeterMeter / unifiedMeterMeterMeterMeterMeter / Taper for Pipe / Parallel for Pipesunified
                                work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]--Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]
                                Pitch (P), Number of Threading(mm)0.4 ～ 1.750.5 ～ 2.50.3 ～ 2.51 ～ 191 ～ 280.5 ～ 30.5 ～ 20.5 ～ 1.750.25 ～ 321 ～ 1.751 ～ 1.751 ～ 2.51 ～ 2.50.5 ～ 3-
                                Tool Material TypeCarbideCarbideCarbideCobalt HSSCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                                Tap TypeThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutter
                                Hole typeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind hole
                                Coating TypeTiAlNTiAlNTiAlNTiNTiAlNTiAlNDLCFor High Hardness (Silicon Group)For High Hardness (Silicon Group) / OtherTiAlNTiAlNTiCNTiCNTiAlNTiAlN
                                Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                                Overall Length (L)(mm)58 ～ 7357 ～ 11539 ～ 10580 ～ 21060 ～ 12060 ～ 12057 ～ 9248 ～ 744062 ～ 8962 ～ 8954 ～ 10254 ～ 10250 ～ 14045

                                Loading...

                                1. 1

                                Configure

                                Clear All

                                Specification/Dimensions

                                Narrow search by specifying Manufacturer

                                CAD

                                Related Categories to Thread Cutters

                                Payment MethodMetode Pembayaran more Pelajari lebih lanjut

                                About MISUMITentang MISUMI

                                About this WebsiteTentang Website ini

                                Useful ToolsAlat Serbaguna

                                Customer ServiceLayanan Pelanggan

                                MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

                                • Tel:021-8984-0008
                                • Fax:021-8984-0007
                                Inquiry Permintaan
                                Mobile View Tampilan Mobile

                                Copyright © MISUMI Corporation All Rights Reserved.