Vernier Calipers（Page2）

• 

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  Days to Ship:	16 Day(s) or more

• 

  [Kanon] Large Caliper EMA

  NAKAMURASEISAKU

  [Features]
  · A standard long digital vernier caliper.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring turned workpieces.

  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring at various machining sites.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  [Kanon] Centerline Caliper RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-S

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch of small diameter holes.
  · Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch"

  Days to Ship:	25 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter on a long workpiece.
  · Large digital calipers with a "measurement length of 600 mm" ideal for equal diameter hole measurements with long workpieces.
  · Long calipers which can measure the pitch between 2 holes of the same diameter and the distance between the edge and the hole center.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM30DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring hole pitch from wall surfaces.
  · A multifunction, direct reading type, digital round hole pitch caliper, with which "3 measurements" can be enabled by replacing the gauge head.

  Days to Ship:	14 Day(s) or more

• 

  [Kanon] Standard Calipers SM

  NAKAMURASEISAKU

  Mini Calipers and Standard Long Calipers
  
  [Features]
  · Standard vernier calipers for regular measurements.
  · Standard scale type calipers with "green lines" that don't tire the eyes

  Days to Ship:	16 Day(s) or more

• 

  [Kanon] Caliper with Curre Jaw E-RA

  NAKAMURASEISAKU

  • STOCK

  Days to Ship:	1 Day(s)

• 

  [Kanon] Caliper with Curre Jaw RA

  NAKAMURASEISAKU

  [Features]
  · Made of stainless steel (SUS420J2).
  · Ideal for measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in pockets.
  [Applications]
  · For measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in deep pockets.

  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Caliper for Narrow Spaces ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For internal/external measurements in narrow/deep places.

  Days to Ship:	14 Day(s) or more

• 

  [Kanon] Vernier Caliper For Inside Measurement E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Days to Ship:	16 Day(s) or more

• 

  [Kanon] Digital Blade Caliper E-BL

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the gap between grooves for narrow grooved workpieces.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring the gap between grooves for narrow workpieces.

  Days to Ship:	12 Day(s)

• 

  [Kanon] Short Leg Caliper SBM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring machining steps within holes.
  · "Short-leg jaw" is shaped to make measuring the stepped sections in holes easier.
  · Has a short jaw ideal for measurement for deep hole groove processing

  Days to Ship:	14 Day(s) or more

• 

  Vernier Caliper, Drip-proof Stainless Steel Digital Caliper

  A&D

  Easily usable drip-proof stainless steel vernier calipers with a drip-proof structure and a large liquid crystal display.
  [Features]
  · High speed response (maximum response speed: 3 m/s).
  · Smooth and sliding, with no surface irregularities.
  · Drip-proof structure IP54 (normal operation even when wet if wiped dry).
  · Equipped with data hold function and auto power off function.
  · Comes with a thumb roller that allows fine adjustment.
  [Applications]
  · For inspection work, design measurements, civil engineer measurements, etc.
  · For agriculture and fishery.

  Days to Ship:	8 Day(s) or more

• 

  Vernier Caliper, Digital Calipers AD-5764A Series

  A&D

  Minimum display of 0.01 mm, large, easily visible liquid crystal display digital calipers.
  [Features]
  · High speed response (maximum response speed: 3 m/s).
  · Smooth and sliding, with no surface irregularities.
  · Equipped with data hold function and auto power off function.
  · Comes with a thumb roller that allows fine adjustment.
  [Applications]
  · Design measurements, civil engineer measurements, etc.
  · For agriculture and fishery.
  · Inspectors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Flat Calipers Pocket

  SHINWASOKUTEI

  Calipers used for various dimensional measurements.
  [Features]
  · Lightweight, compact, and easy to carry.
  · With a strap hole.
  · Made of sturdy polycarbonate resin which contracts and expands very little with fluctuations in temperature.
  · No concern needed about scratching the measured object or generation of rust.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Caliper Attachment

  NIIGATA SEIKI (SK)

  Caliper attachment for enabling point measurements in tight spaces just by mounting to calipers
  [Features]
  · Attach to the outer jaws of calipers to enable use as point type calipers.
  · Ball probe on one side and pin type probe on the other. Ideal for measuring the thickness of pipes with a shape in which grooves have been cut into the exterior.
  [Applications]
  · Attaches to the outer jaws of calipers to enable measurement of concave surfaces.

  Days to Ship:	16 Day(s) or more

• 

  Vernier caliper with product certificate (product body and JCSS calibration certificate)

  SHINWASOKUTEI

  Four measurements possible: outer diameter, inner diameter, depth, and step measurement. A standard type vernier caliper that is easy to use.

  Days to Ship:	32 Day(s) or more

• 

  Free-Stage Scale GVC-15KD/20KD/30KD

  NIIGATA SEIKI (SK)

  Calipers with stepped graduations, using Vernier scale decimal points that are easy to directly read together with the main scale.
  [Features]
  · The new design of the stepped scale prevents erroneous reading.
  · Continuous numbering + 2 mm point scale, so numerical values can immediately be grasped.
  · A stepped scale with easy-to-see 1 mm graduations has been adopted for the main scale.
  · The Vernier scale decimal points are easy to read directly together with the main scale.
  [Applications]
  · Used for measuring outside, inside, level difference and depth.

  Days to Ship:	16 Day(s) or more

• 

  Free-Stage Scale GVC-15KDS

  NIIGATA SEIKI (SK)

  The stepped scale on the calipers improves visibility and design and prevents erroneous reading.
  [Features]
  · The main scale is a stepped scale type with easy-to-see 1 mm graduations.
  · Continuous numbering + 2 mm point scale specifications, so numerical values can immediately be grasped.
  · The Vernier scale decimal points are easy to read directly together with the main scale.
  · The main scale features an improved design with colored numbers for better visibility.
  [Applications]
  · Used for measuring outer diameter, inner diameter, level difference and depth.

  Days to Ship:	18 Day(s) or more

• 

  Nogicon

  NIIGATA SEIKI (SK)

  Convenient caliper that enables high precision scribing.
  [Features]
  · Attach to standard calipers for use as precision scribing calipers.
  · Attaches to the jaws of calipers to enable highly accurate scribing.
  [Applications]
  · Mounted to calipers for use as a scribing tool.

  Days to Ship:	17 Day(s) or more

• 

  Vernier Caliper, Scriber Calipers

  NIIGATA SEIKI (SK)

  Convenient scribing calipers with carbide tips.
  [Features]
  · For high precision scribing work.
  · Both measurement and scribing are possible.
  · With carbide tip (inner and outer measurement surface).
  · Material: Stainless steel.
  [Applications]
  · One unit can be used for both measurement and scribing. Recommended for those in the sash industry and canning industry.

  Days to Ship:	16 Day(s) or more

• 

  Digital Round Hole Pitch Gun

  NAKAMURASEISAKU

  An excellent product with a digital display that can be read from an overhead view (looking down from above).
  [Features]
  · Optimal for measuring the pitch of circular holes. Direct-reading type.
  [Applications]
  · For measurement at various drilling sites.
  [Material]
  · Stainless steel (SUS420J2)

  Days to Ship:	8 Day(s)

• 

  [With Fine Control] Precision Slide Caliper EA725BE-11

  ESCO

  【Product Specifications】
  ・Minimum scale-0.05mm
  ・Stainless steel (chrome plating)
  ・With fine travel control
  ・With wooden case
  ・Range…250mm
  ・Jaw L…80mm
  ・Accuracy…±50μm

  Days to Ship:	16 Day(s) or more

• 

  300 mm, Digital Vernier Calipers, EA725D-4B

  ESCO

  【Product Specifications】
  ・Function-Zero reset, auto power off, datahold
  ・With depth bar
  ・Power supply-CR2032x1 pc (included)
  ・Material-Jaw・main scale： stainless steel (SUS420J2 equivalent), the display unit： ABS resin
  ・With Plastic case
  ・Maximum readings-300mm
  ・Minimum division(mm)-0.01
  ・Jaw length(mm)-60
  ・Accuracy-±0.04mm
  ・Length-390mm
  ・Weight-274g
  ・Comparative measurements and indirect measurements are possible.
  ・With thumb roller, which allows slight adjustment by rolling it.
  ・Accessories-battery(for monitor), manual, plastic case, performance inspection certificate

  Days to Ship:	16 Day(s) or more

• 

  Silver M Type Caliper with Fine Movement Speed

  NIIGATA SEIKI (SK)

  [Features]
  · Convenient for quantity inspection measurement of equivalent sizes.

  Days to Ship:	17 Day(s) or more

• 

  Connection Cable 1m (For CD-S15c・S20c)

  AS ONE

  【Product Specifications】
  ・Model number： 959149
  ・Size (mm)： Connection cable 1m (for CD-S15C・S20C)
  ・For DOS/V

  Days to Ship:	8 Day(s) or more

• 

  Vernier Caliper, Connection Cable 1 m (For MDC-25 mJ・ 50 mJ)

  AS ONE

  【Product Specifications】
  ・Model number： 05CZA662
  ・Type： Connection cable 1m (for MDC-25MJ・50MJ)
  ・For DOS/V

  Days to Ship:	8 Day(s) or more

• 

  Connection Cable 2m (For MDC-25 MJ・50mJ)

  AS ONE

  【Product Specifications】
  ・Model number： 05CZA663
  ・Type： Connection cable 2m (for MDC-25MJ・50MJ)
  ・For DOS/V

  Days to Ship:	15 Day(s) or more

• 

  Foot Switch FS18 for Minitor Jet II

  AS ONE

  Foot Switch FS18 for Minitor Jet II
  [Part Number]FS18
  ON/OFF Foot Switch

  Days to Ship:	8 Day(s) or more

• 

  Fiber Calipers Dial Type

  SHINWASOKUTEI

  [Features]
  · The dial is easy to see and can be read at a glance.
  · Does not scratch the measured object.
  [Applications]
  · For outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Wireless Vernier Caliper E-FW

  NAKAMURASEISAKU

  It helps shorten the quality control and measurement time.
  Just press a button to transmit measurement data.
  The measured value is sent simply by pressing a button after measurement is complete.
  As a transceiver is embedded in the caliper body, no cable is needed.
  The standardly equipped software can generate, from the measurement data, the average value, standard deviation, and pass/fail judgments.
  The receiver is a USB type which can be connected to a computer with a single touch. (1 caliper unit is included)
  
  [USB Receiver]
  · Model: USB-K1
  · Frequency band: 2.4 GHz low power radio
  · Power Source: Supplied from USB Terminal
  · Reception confirmation: LED lights up when receiving
  · Operating temperature range: 0°C – +40°C
  · Operating humidity range: 70% and below relative humidity
  · Mass: 10 g
  · Dimensions: 27 X 50.6 X 13 mm

  Days to Ship:	16 Day(s) or more

• 

  M Type Standard Slide Caliper GVC-30kD

  AS ONE

  【Product Specifications】
  ・Maximum measured value (mm)： 300
  ・Model number： GVC-30KD

  Days to Ship:	22 Day(s) or more

• 

  Digital Caliper

  MURATEC KDS

  Days to Ship:	12 Day(s)

• 

  Caliper Attachment

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  Caliper for Left hand

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  Digital Caliper GDCS

  NIIGATA SEIKI (SK)

  Days to Ship:	1 Day(s) or more

• 

  Digital Caliper for Left hand

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  Long Jaw Caliper

  NIIGATA SEIKI (SK)

  Days to Ship:	1 Day(s) or more

• 

  LR type Vernier Caliper

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  Plastics Caliper

  NIIGATA SEIKI (SK)

  Days to Ship:	1 Day(s) or more

• 

  Scribing Gauges

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  SK Bluetooth Box

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  Vernier Caliper TVC

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s) or more

Loading...