Goniometers

• 

  Bevel Box BB-180A

  NIIGATA SEIKI (SK)

  A compact digital angle meter that includes an absolute measurement mode that can be used for storing the home point.
  [Features]
  · Zero setting is possible at an arbitrary position.
  · Includes an absolute measurement mode that can be used for storing the home position.
  · Values can be held with a hold switch.
  · With bottom magnet.
  · Equipped with auto off function (after about 5 minutes).
  [Applications]
  · Usable even in a small space, conventionally impossible.
  · Can be used as a reference for angle measurements, assembly, and machining for machinery, molds, and jig tools, etc.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Digital angle meter

  SHINWASOKUTEI

  Digital angle meter used for angle measurement.
  [Features]
  · It can be set as a reference point at any angle, convenient for measurement from the reference point.
  [Applications]
  · For machinery and equipment installation.

  Days to Ship:	15 Day(s)

• 

  Level point M

  NIIGATA SEIKI (SK)

  An angular gauge that can simultaneously perform measurement of tilt angle, angling of the outer periphery of round bars and punching.
  [Features]
  · Directly reads angles with a single touch.
  · From horizontal to vertical, any angle can be measured quickly and accurately.
  · Carbide tip is attached to the tip of the punching part.
  · Leg magnet included.
  [Applications]
  · Can be used to perform measurement of tilt angle, angling of the outer periphery of round bars and punching.

  Days to Ship:	1 Day(s)

• 

  Protractor No. 19 Stainless Steel

  NIIGATA SEIKI (SK)

  An angle gauge with graduations on the pole that can also measure length.
  [Features]
  · Stainless steel finish, pole with scale.
  · Maximum Measurement Angle: 180°
  [Applications]
  · Used for measuring angles.

  Days to Ship:	30 Day(s)

• 

  Bevel Box BB-180L

  NIIGATA SEIKI (SK)

  A goniometer with a backlit that can measure even in a dark place, installable even in conventionally impossible small spaces.
  [Features]
  · Back light type.
  · Comes with calibration function that can also be used as a level.
  · Zero setting is possible at an arbitrary position.
  · Equipped with auto off function (after about 5 minutes).
  · Values can be held with a hold switch.
  · Includes an absolute measurement mode that can be used for storing the home position.
  · Equipped with a backlight that allows measurement even in dark places.
  [Applications]
  · Precision angle measurement instrument used as a reference for angle measurements, assembly, and machining for machinery, molds, and jig tools, etc.

  Days to Ship:	12 Day(s)

• 

  Protractor No.101

  NIIGATA SEIKI (SK)

  Since the pole can be fixed and bears graduations, it is convenient for work that requires high accuracy.
  [Features]
  · The poles are fixed to the slide grooves with nuts and bolts.
  · Suitable for high-precision measurement and inspection.
  · Silver finish.
  · Maximum measurement angle: 180°.
  [Applications]
  · Used for angle measurement.

  Days to Ship:	Same day

• 

  Digital Angle Meter Levelnic DP-10XY

  NIIGATA SEIKI (SK)

  Leveling can be performed easily with this digital angle meter.
  [Features]
  · Inclination angles in X and Y directions are displayed at the same time, so the leveling is easy.
  · Display can be switched among XY, X only, and Y only display.
  · Display with backlight.
  · With dedicated software that enables display and storage of measured values on the computer.
  [Applications]
  · Leveling and gradient angle measurement of surface plates, machine tools, etc.

  Days to Ship:	Quote

• 

  Protractor (Silver Finish)

  TRUSCO NAKAYAMA

  [Features]
  · Pole can be fixed.
  · The silver finish on the surface suppresses the reflection of light, making the letters easy to see.
  [Applications]
  · Angle measurement.

  Days to Ship:	1 Day(s)

• 

  Digital Angle Sensor

  NIIGATA SEIKI (SK)

  An angle gauge convenient for measuring the tilt angle of machine tools and structures.
  [Features]
  · Can be used as 2-axis angle sensor assembled to devices.
  · Inclination angles in X and Y directions are output at the same time.
  · When power is supplied externally, the X/Y inclination angle is output through RS-232C signal. (Power supply and output connected via terminal block)
  · With dedicated software that enables display and storage of measured values on the computer.
  · Measurement Range: ±9.998°, Measuring Repeatability: ±0.01°
  [Applications]
  · The product may be secured on machine tools, construction equipment or structures to measure inclination angles, or used as a control sensor.

  Days to Ship:	17 Day(s) or more

• 

  Bevel Box BB-180

  NIIGATA SEIKI (SK)

  A compact digital angle gauge that can be used even in a small space, conventionally impossible.
  [Features]
  · Zero setting is possible at an arbitrary position.
  · With auto off function. (Approximately 5 minutes)
  · With base magnet.
  [Applications]
  · Precision angle measurement instrument used as a reference for angle measurements, assembly, and machining for machinery, molds, and jig tools, etc.

  Days to Ship:	1 Day(s)

• 

  Digital Angle Meter Levelnic DP-50

  NIIGATA SEIKI (SK)

  High precision digital goniometer that can measure immediately, as the zero reference is set.
  [Features]
  · A digital angle meter that supports work site needs. Zero setting is possible at an arbitrary position.
  · With vertical measurement surface magnet.
  · Encoder slit type guarantees consistent precision.
  · With hold function.
  · Includes screw hole (M5) to enable mounting to the reference surface. (80 mm interval)
  · Display unit: DEG (degrees), measurement surface V groove machining. (2-surface)
  [Applications]
  · Used for measuring the tilt angle.

  Days to Ship:	12 Day(s)

• 

  Ken Measure (Calipers for measuring bending point)

  TRUSCO NAKAYAMA

  [Features]
  · A measuring tool which can be used in the same way as calipers, capable of measuring dimensions from virtual intersections of both acute angles and obtuse angles.
  · In sites where precision sheet metal machining could not be done before, measurement of the angular curve and the extended dimensions can be determined.
  · Enables measurement from the virtual intersection at machining sites.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Micro Protractor

  MARUIKEIKI

  [Features]
  · 1 minute direct reading with micro head.
  · The coarse movement / inching / rotation clamp is operated with one touch.
  · Can measure two-sided narrow angles and can be used for measuring bent angles of sheet metal and prism optics.
  · Heavy duty type (high rigidity) available: Model MP-101ST (separately quoted).
  [Applications]
  · Angle measurement for objects from welded steel frames to golf clubs.

  Days to Ship:	16 Day(s) or more

• 

  Dial Slant Rule Gentle Scale

  NIIGATA SEIKI (SK)

  For measuring the tilt angle. Analog type that's light and easy to use
  [Features]
  · An analog type easier to see than a bubble tube level gauge.
  · Easily read stepped scale.

  Days to Ship:	16 Day(s) or more

• 

  Digital protractor (stainless steel)

  SHINWASOKUTEI

  [Features]
  · Since it has a digital display, numerical values can be read at a glance.
  · With hold function.
  · Can be fixed by tightening the lock knob.
  · The etched scale of the straight ruler part features excellent durability.
  · Specifications include a reference point on the left edge face, convenient for measurement, and an interior reference point scale for perpendicularity.
  · Can also be used extended.
  [Applications]
  · For measuring angles, scribing, and measuring length.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digital Angle Gauge MDAG-L

  MISUMI

  Angle meter that can be used in tight spaces not previously accessible with a regular angle meter. Also includes a backlit display for easy reading in poor lighting conditions.
  [Features]
  ・Backlit type.
  ・With a calibration function that can be used as a level.
  ・0 can be set at any position.
  ・With auto-off function.(Approx. 5 minutes)
  ・The value can be fixed with the hold switch.
  ・It comes with an absolute measurement mode that can store the origin.
  ・With backlit display for easy reading in poor lighting conditions.
  [Applications]
  ・Precision angle measuring instrument used as an angle measurement, assembly, and machining standard for machines, molds, jigs, tools, etc.

  Days to Ship:	16 Day(s) or more

• 

  Level mate (analog protractor)

  NIIGATA SEIKI (SK)

  Analog type angle gauge with a V-groove and magnet that can measure round objects and frees up both hands.
  [Features]
  · Can be used for assembling and installing machinery and is convenient for setting angles for parts machining.
  · Has a V-groove, making it extremely convenient for measuring round objects and performing leveling and inclining of pipes in various piping work.
  · Since it has magnets on the right vertical surface, measurement can be performed hands-free for vertical measurement of metal products.
  [Applications]
  · Used for measuring the tilt angle.

  Days to Ship:	12 Day(s)

• 

  Mini Leveler (without Magnet/Analog Display)

  NIIGATA SEIKI (SK)

  Small and lightweight level convenient for horizontal measurement, construction works, and leveling equipment for installation.
  [Features]
  · Compact and lightweight level that's convenient for carrying around.
  · Horizontal measurement is possible.
  [Applications]
  · Used for horizontal measurement, construction work, and leveling equipment for installation.

  Days to Ship:	1 Day(s) or more

• 

  Protractor No.1000

  NIIGATA SEIKI (SK)

  [Features]
  · Large protractor. Select the model according to the measured object.
  · Silver finish

  Days to Ship:	17 Day(s) or more

• 

  Protractor No. 19 2 Pole

  NIIGATA SEIKI (SK)

  2-rod type protractor which can measure acute angles (angles of 90° or less).
  [Features]
  · 2-piece rod type that can measure acute angle θ° (10°or more) in 1°　increments in addition to normal angle measurements.
  · A goniometer with a silver finish (hard chrome plating) to make the scale easy to read.
  · Maximum Measurement Angle: 180°
  [Applications]
  · Used for angle measurement.

  Days to Ship:	16 Day(s) or more

• 

  Protractor No.19A

  NIIGATA SEIKI (SK)

  Protractor cut type angle gauge useful for acute angle measurement.
  [Features]
  · Can measure small acute angles (angles of 90° or less) by using two rods.
  · 2-piece rod type that can measure acute angle θ° (10°or more) in 1°　increments in addition to normal angle measurements.
  · Maximum Measurement Angle: 90°
  · Stainless steel finish.
  [Applications]
  · Used for angle measurement.

  Days to Ship:	12 Day(s) or more

• 

  Protractor No.19B

  NIIGATA SEIKI (SK)

  A protractor with a base line provided on the pole that can measure the angle regardless of the position of the pole.
  [Features]
  · Goniometer with stainless steel finish.
  · Maximum measurement angle: 180°.
  [Applications]
  · Used for angle measurement.

  Days to Ship:	16 Day(s) or more

• 

  Protractor No.182

  NIIGATA SEIKI (SK)

  An extremely useful protractor with a pin built into the center lock nut for centering.
  [Features]
  · Thanks to its silver finish, the scale on this goniometer is easy to read.
  · 3-inch needle type for marking.
  · Maximum measurement angle: 180°.
  [Applications]
  · Used for angle measurement.

  Days to Ship:	16 Day(s) or more

• 

  Protractor No.183

  NIIGATA SEIKI (SK)

  Use the right angle part of the main unit of this protractor to measure angles and perform scribing work.
  [Features]
  · The silver finish on the main unit of the goniometer makes graduations easy to see.
  · Maximum measurement angle: 180°.
  [Applications]
  · Used for angle measurement.

  Days to Ship:	21 Day(s) or more

• 

  Protractor No.400

  NIIGATA SEIKI (SK)

  Large high-precision protractor with minimum scale angle of 0.5°.
  [Features]
  · Both the main unit and rod of this goniometer are finished in silver to make the graduations even easier to see.
  · A multipurpose protractor with a millimeter rod, which can be used as a scale.
  · Capable of accurate measurement thanks to the minimum scale angle of 0.5°.
  · Maximum measurement angle: 180°.
  [Applications]
  · Used for angle measurement.

  Days to Ship:	17 Day(s) or more

• 

  Protractor No.600

  NIIGATA SEIKI (SK)

  [Features]
  · Large protractor. Select the model according to the measured object.
  · Silver finish

  Days to Ship:	17 Day(s) or more

• 

  Protractor No.15

  NIIGATA SEIKI (SK)

  A protractor with slidable pole capable of depth measurement as well as angular measurement and scribing work using its right angle part.
  [Features]
  · Rod with scale that can be slid for convenience in angle measurement.
  · Depth can be measured using the graduations on the pole.
  · Use the right angle section of the unit for angle measurement, scribing, etc.
  [Applications]
  · Used for angle measurement.

  Days to Ship:	Quote

• 

  Protractor No. 19 Silver

  NIIGATA SEIKI (SK)

  Scale is made of stainless steel and surface is finished in silver, so scale is not hidden and is easy to read directly.

  Days to Ship:	16 Day(s) or more

• 

  Protractor No.192

  NIIGATA SEIKI (SK)

  A protractor that can be attached to jigs and machines.
  [Features]
  · Goniometer that can be mounted to jigs or machinery using the φ5 (5 mm) diameter mounting hole with a half circle protractor.
  [Applications]
  · It can be attached to jigs and machines to measure angles.

  Days to Ship:	16 Day(s) or more

• 

  Protractor No.193

  NIIGATA SEIKI (SK)

  A protractor that can be attached to jigs and machines.
  [Features]
  · Extremely convenient goniometer to use mounted to jigs or machinery with a circle plate protractor.
  [Applications]
  · It can be attached to jigs and machines to measure angles.

  Days to Ship:	12 Day(s) or more

• 

  Protractor No.300

  NIIGATA SEIKI (SK)

  [Features]
  · Large protractor. Select the model according to the measured object.
  · Silver finish

  Days to Ship:	17 Day(s) or more

• 

  Protractor

  TRUSCO NAKAYAMA

  [Features]
  · An instrument for measuring the angle of a workpiece.
  · Pole can be fixed.
  · Pole scale has 2 scales on one side at 1 mm intervals.
  [Applications]
  · Angle measurement.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Protractor (Silver Finish/Precision)

  TRUSCO NAKAYAMA

  [Features]
  · The pole can be completely fixed, which allows it to be used for high precision applications.
  · The silver finish on the surface suppresses the reflection of light, making the letters easy to see.
  · Pole scale has 2 scales on one side at 1 mm intervals.
  [Applications]
  · Angle measurement.

  Days to Ship:	1 Day(s)

• 

  Protractor (2-Rod)

  TRUSCO NAKAYAMA

  [Features]
  · Acute angle measurement has become possible.
  · Pole can be fixed.
  · Processed to allow texts on the scale to be legible.
  · The silver finish on the surface suppresses the reflection of light, making the letters easy to see.
  · Pole scale has 2 scales on one side at 1 mm intervals.
  [Applications]
  · Angle measurement.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Universal Bevel Protractor

  TRUSCO NAKAYAMA

  [Features]
  · Vivid scale markings.
  · Fine-movement type scale alignment allows easy alignment of an angle.
  · For assembling machine assembly, molds, jigs, etc. It is also suitable for angle scribing.
  [Applications]
  · Facilitates assembly of machinery and metal molds, jigs, etc., and can also be used to scribe angles.

  Days to Ship:	1 Day(s)

• 

  Height Gauge Bevel

  MARUIKEIKI

  [Features]
  · Can be mounted on a height gauge or calipers.
  · Uses a newly developed measurement probe that fits closely to the workpiece.
  · Includes an output terminal.
  [Applications]
  · Used for the side-to-side included angle of small accessories.
  · Use as a post-machining inspection tool.
  · Can be ingeniously used in narrow spaces.

  Days to Ship:	16 Day(s) or more

• 

  Single Protractor

  MARUIKEIKI

  [Features]
  · Detailed reading is possible by adopting a vernier scale plate.
  · A clamp handle that locks at an arbitrary angle.
  [Applications]
  · Can measure two-sided narrow angles.
  · For measuring the machining angle of sheet metal, machinery, steel frames, etc.
  · Angle measurement for objects from welded steel frames to golf clubs.

  Days to Ship:	18 Day(s) or more

• 

  R Calipers

  MARUIKEIKI

  [Features]
  · Conventionally, it was necessary to prepare several radius plate gauges to measure a radius, but the newly developed radius calipers alone can measure radii of 0.5 to 150 mm.
  · Can be used the same way as calipers.
  [Applications]
  · As an instrument for measuring external diameters of piping for civil engineering work and wheel external diameters of axles.
  · For checking the roundness when cutting sheet metals.
  · For designers performing curve (R) verification.

  Days to Ship:	12 Day(s)

• 

  AT Protractor

  TOEIKOGYO

  [Features]
  · Conventional protractors are limited to measurement of the external angle. However, the AT Protractor No. 70 is able to measure both the internal and external angles, doing away with the need for positioning and measuring after creating pattern paper.
  · Measurement of any acute angle is possible.

  Days to Ship:	16 Day(s) or more

• 

  Digital Bend Meter

  TOEIKOGYO

  Enables direct reading of the bent angle of sheet metal in real time without calculation. Successful in world's first miniaturization.
  
  [Features]
  · 2 types of measurements are possible with button switching.
  · Enables direct reading of the bent angle of sheet metal without calculation.
  · Can also be used as an ordinary goniometer.
  · Zero can be set at an arbitrary angle, and measurement performed from that position.
  · Display stabilization time has been shortened to 3 seconds to increase work efficiency.
  · The numbers automatically reorient to display facing upward if the main unit is turned upside down.
  · The mode and numerical values are stored when power is cut off.
  · With strong magnets (2 kg adsorption force x 3).
  · With fall-prevention strap.

  Days to Ship:	16 Day(s) or more

• 

  Bevel Protractor B Grade Hardened

  RIKEN KEISOKUKI

  [Features]
  · Use for angle setting and assembly of machinery, molds, and jigs.
  · Minimum read value is 5 minutes (angle minutes).
  · We also manufacture A-grade precision products on request

  Days to Ship:	16 Day(s) or more

• • On Sale Till 31/03/2025

  

  Protractor No.30

  NIIGATA SEIKI (SK)

  High accuracy protractor, essential for canners.
  [Features]
  · This goniometer comes with an easily visible scale thanks to the silver finish.
  · Maximum measurement angle: 180°, accuracy: ±15'.
  [Applications]
  · Used for angle measurement.

  	Special Price
  Days to Ship:	Same day

• 

  Protractor Mini Silver φ40 (Diameter 40 mm) Rod Gradations 10 cm

  SHINWASOKUTEI

  An angle meter for measuring angles, scribing, and measuring length.
  [Features]
  · The scale has been etched and black chrome plated to prevent fading.
  · It uses large, vivid scale numerals.
  [Applications]
  · Useful for measuring angles, scribing, and measuring length.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Protractor Stainless Steel

  SHINWASOKUTEI

  For measuring angles, scribing, and measuring length.
  
  [Features]
  · The scale has been etched and black chrome plated to prevent fading.
  · Large, vivid scale numerals have been adopted.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Protractor No.30 Silver φ120 No Rod Gradations

  SHINWASOKUTEI

  For measuring angles, scribing, and measuring length.
  
  [Features]
  · The scale has been etched and black chrome plated to prevent fading.
  · Large, vivid scale numerals have been adopted.

  • STOCK

  Days to Ship:	1 Day(s)

Loading...