Screwdrivers

• 

  BAHCO, 22-Piece Stubby Ratcheting Screwdriver Set

  BAHCO

  Based on ergonomics, it is easier to grip and leads to prevention of injuries. For fine work.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ball Grip Tang-Thru Screwdriver No. 230

  VESSEL

  Easy-to-use through screwdriver with ball grip that is easy to grip however you hold it.
  [Features]
  · Through type which can be hit with a hammer.
  · With star nuts.
  · Abundant tightening torque for screws.
  · Color-coded by Phillips or flathead.
  · Cushion grip.
  · The cutting edge has undergone high precision black point processing.
  [Applications]
  · For various screw fastening work.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Soft Screwdriver set (With Magnet)

  KTC(KYOTO TOOL)

  [Features]
  · Shaft material is Cr-V.
  · The grip is light, not sticky, and uses environmentally friendly elastomer resin.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Wooden handle through screwdriver (with magnet)

  TRUSCO NAKAYAMA

  Special rust-resistant plating is applied.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ordinary Screwdriver (With Magnet)

  TRUSCO NAKAYAMA

  Features a non-slip ergonomically designed grip.
  It has a magnet on the tip.

  • STOCK

  Days to Ship:	Same day

• 

  "Magazine Bit Screwdriver" (Magnetic)

  TRUSCO NAKAYAMA

  [Features]
  · The magnet prevents internal fluctuations, which allows for smooth work and mitigates discomfort.
  · It has an ergonomic handle certified by GS that's gentle on hands and prevents fatigue.
  · A detachable hex shaft adapter type that can be plugged into an electric screwdriver.
  · Supports 8 sizes with a single unit.
  · The head of the main body is an open type magnetic cap specification and can be used to store 7 bits.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Craft Form Plus Screwdriver

  WERA

  [Features]
  · The lasered tip provides exceptional bite into screws.
  · Special grip design provides an easy grip and comfortable fit.
  · Equipped with a bolster that can be firmly tightened with a wrench, etc.

  Days to Ship:	12 Day(s)

• 

  Resin handle screwdriver (minus/cross penetrating, magnet included)

  KTC(KYOTO TOOL)

  [Features]
  · It is a resin grip that is hard, durable, and prevents dirt.
  · The shaft is round.
  · Through-hole type.
  · Shaft material is Cr-V.
  [Applications]
  · General purpose tool

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Power Grip Screwdriver No.4500

  VESSEL

  An easy-to-grip through screwdriver with an ergonomically designed grip.
  [Features]
  · A plastic handle through-type which is strong against rough use.
  · With a hexagon part that can be tightened strongly with a wrench, etc.
  · The handle is made of cellulose acetate resin and has an ergonomic design.
  [Applications]
  · Through hole type, for demanding work.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Screwdriver Set (8 pieces set)

  TRUSCO NAKAYAMA

  A set made up of tools with electrician's grips for sizes that are frequently used.

  • STOCK

  Days to Ship:	1 Day(s)

• • On Sale Till 31/03/2025

  

  Plastic handle screwdriver (with magnet)

  TRUSCO NAKAYAMA

  The bottom of the grip is a ball type, making it easier to turn the screw.

  • STOCK

  	Special Price
  Days to Ship:	1 Day(s)

• 

  Wooden handle screwdriver (with magnet)

  TRUSCO NAKAYAMA

  Special rust-resistant plating is applied.

  • STOCK

  Days to Ship:	1 Day(s)

• • On Sale Till 31/03/2025

  

  Screwdriver for electrical work with fall prevention (with magnet)

  TRUSCO NAKAYAMA

  [Features]
  · Easy to turn and hard to tarnish, with 360 degree rotation function, driver is protected from falling at high altitude work.

  • STOCK

  	Special Price
  Days to Ship:	1 Day(s)

• 

  SUS Screwdriver Set SD8

  TONE

  An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
  · Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Megadora Tang-Thru Screwdriver No. 930

  VESSEL

  Easy-to-use through screwdriver that is easy to grip however you hold it.
  [Features]
  · The cross-recessed end firmly grips the screw.
  · Through type, with a large nut.
  · With a hex bolster for wrenches.
  [Applications]
  · For various screw fastening work.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  SUS Screwdriver SMD-075

  TONE

  An all-stainless steel flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, plumbing work, etc.
  · Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Interchangeable Screwdrivers D-52, D-54, D-58

  HOZAN

  Screwdriver with interchangeable shaft.
  [Features]
  · The tip is a combination of Phillips and flathead shapes.
  · Tip size: D-52 +No. 00 / -2.5 X 0.4, D-54 +No. 1 / -4.0 X 0.55, D-58 +No. 2 / -5.5 X 0.9.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Interchangeable Screwdriver Set D-44

  HOZAN

  Screwdriver set with interchangeable shafts.
  [Features]
  · Bargain 3-piece set.
  · Chuck case included.

  Days to Ship:	12 Day(s)

• 

  Slotted screwdriver D-630 – D-655

  HOZAN

  [Features]
  · Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
  · Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.
  · Even when thin, "torsional strength" abides by JIS standards.
  · The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.
  · The polypropylene grip with pen clip has both strength and lightness.
  · It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.
  [Applications]
  · Convenient for tightening and loosening screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Screwdriver Set, Plus, Minus【6 Pieces Per Package】

  BAHCO

  Ergo-grip ensures the safety of workers and reduces the risk of injury.

  Days to Ship:	12 Day(s)

• 

  BAHCO, Ratchet Screwdriver, Pistol Type

  BAHCO

  Based on ergonomics, it is easier to grip and leads to prevention of injuries. The grip changes from straight to pistol shaped.

  Days to Ship:	16 Day(s) or more

• 

  Ergonomic Screwdriver

  BAHCO

  Based on ergonomics, it is easier to grip and leads to prevention of injuries.
  
  [Features]
  · A bolster (with a hex bolt) is installed where the grip and the shaft meet, increasing the tightening torque when using a wrench and pliers in combination.
  · The non-fading, bit-shape identifying color coding and symbol display applied on the shaft portion side of the grip and on the grip end allow users to recognize the bit shape almost instantly. The same tools are used to prevent racing car pit crews, for whom every second counts, from choosing the wrong tool. Allows the user to strike the grip end with a hammer, similar to using a through screwdriver.
  · Adopts a small-diameter round shaft that can be easily tightened and loosened.
  · The moderate length of the grip neck fits fingers well and enables quick rotation and accurate torque control.
  · Handle with 3 major features. Ergo-grip, bit shapes with color-coded coatings, and symbols, with a comfortable ergo-grip inner structure for strength and robustness. The handle has a bar code.
  · Designed to take advantage of the round cross section and to fit without any resistance regardless of which direction it is held.
  · The surface of the anti-slip grip is corrugated for maximum comfort, and a soft high-friction material is used. Enables maximum grip even with oily hands.
  · This flat part stops the screwdriver from rolling.
  · Holes for display. Can also be used to prevent falls from high places by threading with a string.
  · The grip end is large and round, so it allows the user to apply force when performing tightening and loosening work, without feeling any pain in the palm.

  Days to Ship:	1 Day(s) or more

• 

  Standard Driver

  ENGINEER

  Standard-type Phillips screwdrivers and flathead screwdrivers.
  [Features]
  · Selection of various sizes is enabled in accordance with work applications.
  [Applications]
  · For work tightening and removing Phillips screws/flathead screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pro Use Screwdriver

  ENGINEER

  Knurled driver can perform rapid turning.
  [Features]
  · The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.
  · A large grip that produces high clamping force.
  [Applications]
  · For tightening and removing various screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Replacement Screwdriver Set DK-05 – 08

  ENGINEER

  Replacement screwdriver set.
  [Features]
  · DK-05, 06 have a low voltage detecting grip. (80 – 300 VAC/100 – 250 VDC)
  · The neon tube embedded inside the unit will light up if you make contact with the screwdriver tip and push the head part of the handle with your finger.
  [Applications]
  · Convenient for repair and maintenance work.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Stubby Phosphorescent Screwdriver (Magnetic)

  ANEX

  [Features]
  · Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
  · Made of martensitic special stainless steel (high strength stainless steel (550)).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  "Superfit" ACR Heavy-duty Screwdriver (Magnetic)

  ANEX

  [Features]
  ·The shape of the tip has a structure that makes it difficult to come out (ACR (R) for the Phillips, serrated for the Slotted) to prevent the cutting edge from rising from the screw.
  ·With a hexagonal bolster, you can use a wrench to turn it more strongly.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Slit Power Screwdriver (Electric Type With Magnet)

  ANEX

  [Features]
  · Non-slip, powerful slit shape and hexagon shape (grip end).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Slit power screwdriver (electric type/through/magnet included)

  ANEX

  [Features]
  · Non-slip, powerful slit shape and hexagon shape (grip end).
  · Includes a washer that can be hit with a hammer.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Rubber Grip Screwdriver (Magnetic)

  HIRAI KOGU

  [Features]
  · Strong cushion grip enables excellent tightening force.
  · (+) No. 2 x 100, (-) 6.3 x 100 shaft with knurling for fast turning and easy filing.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Mini Reverse Gear Ratchet

  SUEKAGE TOOL

  Has a compact head that is the best in its class. The number of gear teeth is 52, and it turns with a satisfying feeling, improving work efficiency. The total height of the head with the included short bit attached is 16.5 mm.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Piercing Screwdriver (Incorporating Magnet)

  TRUSCO NAKAYAMA

  [Features]
  · Features a non-slip ergonomically designed grip.
  · The hexagon nut attached to the base of the shaft can be used together with a wrench to enable strong turning.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  "Long Magazine Bit Screwdriver" (Magnetic)

  TRUSCO NAKAYAMA

  [Features]
  · Supports 8 sizes with a single unit.
  · The head of the main body is an open type magnetic cap specification and can be used to store 7 bits.
  · The magnet prevents internal fluctuations, which allows for smooth work and mitigates discomfort.
  · It has an ergonomic handle certified by GS that's gentle on hands and prevents fatigue.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  "Swift Screwdriver Bit Holder Set" (Magnetic)

  TRUSCO NAKAYAMA

  [Features]
  · This is a portable bit set for electric screwdrivers.
  · 6 bits and hexagonal shaft adapter are contained in a compact case that can sit on the palm of a hand.
  · Bits can be easily taken out and placed back in with one hand.
  · The product can be used as a simple screwdriver by taking out a hexagonal shaft adapter from the case and setting it.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Chisel Driver Set (Penetrating Type)

  WERA

  Special grip design provides an easy grip and comfortable fit.

  Days to Ship:	12 Day(s)

• 

  Craft Form Plus Chisel Screwdriver

  WERA

  [Features]
  · A strike type through screwdriver.
  · Equipped with a bolster that can be firmly tightened with a wrench, etc.
  · Special grip design provides an easy grip and comfortable fit.

  Days to Ship:	12 Day(s)

• 

  Craft Form Compact Screwdriver Bit

  WERA

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Craft Form Stainless Steel Screwdriver

  WERA

  [Features]
  · Special grip design provides an easy grip and comfortable fit.

  Days to Ship:	12 Day(s)

• 

  Flathead Screwdriver Stand (Standard)

  PB SWISS TOOLS

  flathead screwdriver with outstanding impact resistance.
  [Features]
  ・Can be used for general purposes. Recyclable grip. 100-6 to 9 have a square shaft part for hanging a wrench on the shaft.
  ・The grip surface fits comfortably in your hand and the grooves are designed with ergonomics in mind, making it possible to apply large amounts of torque.
  ・High-grade transparent CAB material is extremely impact resistant, oil and gasoline resistant, and recyclable.
  ・Skin-friendly and comfortable grip. Vanilla aroma is mixed in to suppress the odor.
  ・Impact resistance is 1t. Resistant to oil and gasoline.
  [Applications]
  - Ideal for industry, assembly sites, repairs, handicrafts by craftsmen, DIY, hobbies, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Longnose Screwdriver

  PB SWISS TOOLS

  A screwdriver with excellent shock resistance which can be used for general purposes.
  [Features]
  · Screwdriver with excellent track record, millions of units sold over the past several decades.
  · The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
  · The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
  [Applications]
  · Used in various fields such as manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Stubby Flathead Screwdriver

  PB SWISS TOOLS

  A stubby type that's ideal for narrow spaces.

  Days to Ship:	12 Day(s)

• 

  Screwdriver Set with Holder

  PB SWISS TOOLS

  A set of screwdrivers. Holder included.
  
  [Features]
  · A new color insert type has joined the most popular, classic handle Phillips/flathead screwdrivers.
  · Facilitates tool management by color-coding inserts by person or department

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Multi Craft Flathead Screwdriver

  PB SWISS TOOLS

  A screwdriver which ensures the maximum hand torque, due to its round basic form.
  [Features]
  · Easy torque application due to large outer diameter.
  · The handle shape with large grooves provides a sure grip.
  · Demonstrates its true value when used for the harshest work.
  · Tough CAB plastic is extremely rigid and can withstand strong impacts.
  · The structured surface allows it to be reliably held even with an oily hand.
  [Applications]
  · Ideal for use in manufacturing industries, assembly sites, repair plants, etc. where resistance to various substances and durability are required.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Multi Craft Screwdriver Set

  PB SWISS TOOLS

  Multi-craft screwdriver set.
  
  [Features]
  · Holder included

  Days to Ship:	16 Day(s) or more

• 

  Ratchet Driver Set 8510R-30SET

  PB SWISS TOOLS

  A set of ratchet screwdrivers.

  Days to Ship:	35 Day(s)

Loading...