Screwdrivers

• 

  Craft Form, Compact 60RA Set

  WERA

  Replacement drivers are collected in a compact, convenient, hand-held case.

  Days to Ship:	12 Day(s)

• 

  Ratchet driver DBR

  KTC(KYOTO TOOL)

  [Features]
  · The ratchet mechanism enables fast turning in both directions for loosening and tightening.
  · Fixing the ratchet allows it to be used as a normal screwdriver.
  [Applications]
  · General purpose tool

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Craft Form, Compact VDE60 Set

  WERA

  Replacement insulated drivers are collected in a compact, convenient, hand-held case.

  Days to Ship:	12 Day(s)

• 

  Ballpoint Hexagon Screwdriver

  WERA

  As the tip has a ballpoint specification, hex socket head cap bolts, and so on, can be turned even if the screwdriver is inclined slightly at an angle. Special grip design provides an easy grip and comfortable fit.

  Days to Ship:	1 Day(s) or more

• 

  Screwdriver Socket Screwdriver 167M

  KO-KEN TOOL

  [Features]
  ·Grip materials: Soft resin/rubber
  ·Cutting edge magnet: N/A

  Days to Ship:	12 Day(s) or more

• 

  Hex Driver DH

  ENGINEER

  Screwdriver with hexagonal tip.
  [Features]
  · Sizes available for any size hex socket screw.
  · The shaft is chrome-molybdenum steel.
  [Applications]
  · For tightening and removing hex socket screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Offset Ratchet Driver (Straight Type)

  ANEX

  [Features]
  ·For screwdrivers in narrow spaces.
  ·Ultra-thin head 21 mm by adopting ultra-short bit.
  ·19 mm total length ultra-short bit.
  ·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
  ·Straight type.
  [Applications]
  ·For work such as removing screws in narrow spaces.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ballpoint Driver

  TRUSCO NAKAYAMA

  [Features]
  · Tightening is possible even at a 25°tilt thanks to the ballpoint shape.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hex screwdriver 205 series

  PB SWISS TOOLS

  A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
  [Features]
  · It can be used for general applications. Recyclable clip. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.
  · The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
  · The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
  · Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
  · Blade is nickel chrome-plated. Has excellent rust-resistance and long life.
  · The edge is lightly corner-cut, allowing the wrench to be easily inserted into screw holes.
  [Applications]
  · Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Precision Screwdriver Set (With Clear Case)

  VESSEL

  Precision screwdriver set.
  [Features]
  · Blade tips of Phillips, flathead, hex, and socket.
  · Main body stainless steel (end cap part is made of resin).
  · Includes a cushioning grip that supports fastening.
  · Convenient clear carrying case included.
  [Applications]
  · For assembly, disassembly and repair of precision instruments, cameras, watches, eyeglasses, etc.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Compact ratchet 52 (straight type) set

  ANEX

  [Features]
  ·It is ultra-thin with a head width of 20 mm.
  ·For screwdrivers in narrow spaces.
  ·Smooth work with 52 fine gears.
  ·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
  ·Uses ultra-short bits.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Power Socket Screwdriver No. 4100

  VESSEL

  Easy-to-use socket driver made from special steel.
  [Features]
  · Tip part uses special steel material with superior wear resistance.
  · An easy-to-grip ergonomic handle.
  [Applications]
  · For tightening hex bolts and nuts.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Nut Screwdriver DN

  ENGINEER

  Selectable in accordance with work applications: dedicated screwdriver for hex screw and bolt tightening and removal.
  [Features]
  · Excellent resistance to abrasion.
  · Adopts a plastic handle.
  [Applications]
  · For tightening and removing hex screws and bolts.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Bit Set DR-10 – 17

  ENGINEER

  A bit set with wide lineup, optimal for service engineers.
  [Features]
  · Bit set containing frequently used bits for a variety of applications, from short bits and long stepped bits to hex bits and more.
  · Includes burette type holder for convenient bit storage and carrying.
  · DR-16 is a bit set that is ideal for rechargeable/electric screwdrivers.
  [Applications]
  · Assembly of machinery, demolition work, maintenance of equipment, work inside factories, etc.

  • STOCK

  Days to Ship:	12 Day(s) or more

• 

  Ball Screwdriver Overall Length 124–233 mm

  ENGINEER

  Ballpoint type screwdriver.
  [Features]
  · Enables tightening from an angle of around 30°.
  · The shaft is made from a high-carbon steel.
  · Surface processing of screwdriver shaft is non-electrolytic nickel plating.
  [Applications]
  · Ideal for assembly and maintenance work.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ball Screwdriver Set DK-03

  ENGINEER

  Ball screwdriver set enabling tightening from an angle of around 30°.
  [Features]
  · Tightening is possible even at about a 30° tilt thanks to the ballpoint shape.
  · The shaft is made from a high-carbon steel.
  · Surface processing of screwdriver shaft is non-electrolytic nickel plating.
  [Applications]
  · Ideal for assembly and maintenance work.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Replacement Screwdriver Set DK-05 – 08

  ENGINEER

  Replacement screwdriver set.
  [Features]
  · DK-05, 06 have a low voltage detecting grip. (80 – 300 VAC/100 – 250 VDC)
  · The neon tube embedded inside the unit will light up if you make contact with the screwdriver tip and push the head part of the handle with your finger.
  [Applications]
  · Convenient for repair and maintenance work.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hex Screwdriver Set

  ENGINEER

  4-piece DK-01 and 6-piece DK-02 options are available

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pro Hold/Screwdriver, Black Oxide, Single Product, Sold Separately

  BONDHUS

  The ballpoint part is equipped with screw grasping function and the screwdriver has a comfortable grip that is easy to grasp.
  
  [Features]
  · An original nylon resin part embedded into the ballpoint side walls securely catches screws.
  · Can be used for any type of screw.
  · Also supports the use of stainless steel and plastic screws.
  · The special nylon resin used for the Pro Hold is made to withstand attachment/removal tests of thousands of times in a prescribed method.
  · Although it is equipped with the Pro Hold function, the wrench can be tilted.
  · Nonmagnetic in order to be suitable for precision equipment.
  · The bolt can be fixed to the wrench using the Pro Hold function

  Days to Ship:	12 Day(s)

• 

  Ball End Extra-Long Screwdriver, Black Oxide Coating, Single Product

  BONDHUS

  The comfort grip is easy to hold, and allows maximum torque to be applied with minimal force.
  
  [Features]
  · Grips designed based on ergonomics are easy to grip and can produce maximum torque with small force.
  · The grip is designed to prevent tumbling even when tilted to a maximum of 15 degrees.
  · The surface of the grip uses a material that is slip resistant, even when hands are coated in water and oil.
  · The developed ball point has a shape that makes it difficult for the wrench and screw to slip even when tilted at 25°

  Days to Ship:	12 Day(s)

• 

  Ballpoint Screwdriver Set

  BONDHUS

  The comfort grip is easy to hold, and allows maximum torque to be applied with minimal force.
  
  [Features]
  · Grips designed based on ergonomics are easy to grip and can produce maximum torque with small force.
  · The grip is designed to prevent tumbling even when tilted to a maximum of 15 degrees.
  · The surface of the grip uses a material that is slip resistant, even when hands are coated in water and oil.
  · The developed ball point has a shape that makes it difficult for the wrench and screw to slip even when tilted at 25°

  Days to Ship:	12 Day(s)

• 

  Pro Hold® Set of 6 Pieces (Screwdriver with Screw-Gripping Function) Set

  BONDHUS

  The ballpoint part is equipped with screw grasping function and the screwdriver has a comfortable grip that is easy to grasp.
  
  [Features]
  · An original nylon resin part embedded into the ballpoint side walls securely catches screws.
  · Can be used for any type of screw.
  · Also supports the use of stainless steel and plastic screws.
  · The special nylon resin used for the Pro Hold is made to withstand attachment/removal tests of thousands of times in a prescribed method.
  · Although it is equipped with the Pro Hold function, the wrench can be tilted.
  · Nonmagnetic in order to be suitable for precision equipment.
  · The bolt can be fixed to the wrench using the Pro Hold function

  Days to Ship:	12 Day(s)

• 

  Ballpoint Long Screwdriver, Black Oxide Finish, Single Item-Sold Separately

  BONDHUS

  The comfort grip is easy to hold, and allows maximum torque to be applied with minimal force.
  
  [Features]
  · Grips designed based on ergonomics are easy to grip and can produce maximum torque with small force.
  · The grip is designed to prevent tumbling even when tilted to a maximum of 15 degrees.
  · The surface of the grip uses a material that is slip resistant, even when hands are coated in water and oil.
  · The developed ball point has a shape that makes it difficult for the wrench and screw to slip even when tilted at 25°

  Days to Ship:	12 Day(s)

• 

  Superfit Precision Box Screwdriver

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Super Action Grip Screwdriver

  ANEX

  [Features]
  ·Suitable for removing screws that require force.
  ·A single screwdriver can be used in two different ways: straight and T-shaped.
  ·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.
  ·T shape: For initial loosening and retightening that requires force.
  ·Straight type: For normal screwdrivers (fast turning).
  ·Bit replacement formula.
  ·With magnet (bit).
  ・ With storage case.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ratchet Type Mini Stubby Screwdriver

  ANEX

  [Features]
  · Can be used in tight spaces thanks to the utilization of the Star B type ratchet mechanism.
  [Applications]
  · For screw removal work, etc.

  Days to Ship:	1 Day(s)

• 

  Offset Ratchet Screwdriver (Bent-Up Head Type)

  ANEX

  [Features]
  · Uses an ultra-thin type head ratchet structure for convenient work in a tight workspace.
  · Magnet type chucking enables easy attachment and detachment of bits.
  [Applications]
  · For screw removal work in narrow places.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Adjustable Cushioned Ratchet (with Magnet)

  HIRAI KOGU

  [Features]
  · As the shaft length is continuously retractable from a minimum of 80 mm to its longest length of 150 mm, it is perfect for attaching and removing screws in awkward spaces, etc.
  · Various bits can be stored by mounting them to dedicated holders, making them unlikely to be lost.
  · Turns almost any screw, such as hex socket bolts, hexalobular screws, Phillips screws, etc.
  · Includes a ratchet mechanism.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Nut Driver

  HIRAI KOGU

  [Features]
  · Dedicated use for attaching and detaching hex bolts and nuts.
  [Applications]
  · For attaching and removing bolts and nuts in deep areas.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Cross Nut Wrench

  HIRAI KOGU

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Offset Ratchet Driver With Forward/Reverse Switch

  SUNFLAG

  [Features]
  · Has a convenient ratchet function.
  · Comes with a quick-turning dial useful for temporary tightening.
  · With a forward/reverse switch.
  · Torque is greatly improved with special steel.

  Days to Ship:	12 Day(s) or more

• 

  Mini Ratchet Bit Driver

  SUEKAGE TOOL

  A compact design optimal for portability. The mini ratchet has a gear with 52 teeth, which results in a brisk rotation that increases work productivity. Includes a rotating plastic case that can be opened and closed compactly.

  Days to Ship:	12 Day(s)

• 

  Mini Reverse Gear Ratchet

  SUEKAGE TOOL

  Has a compact head that is the best in its class. The number of gear teeth is 52, and it turns with a satisfying feeling, improving work efficiency. The total height of the head with the included short bit attached is 16.5 mm.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Nut driver total length 168 mm, 185 mm, 192 mm

  WERA

  [Features]
  · Since the shaft portion is hollow, the nut can be turned over the entire thread.

  • STOCK

  Days to Ship:	12 Day(s)

• • On Sale Till 31/03/2025

  

  Hexagonal Bar Screwdriver

  WERA

  [Features]
  · Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes.
  · Enhance your work efficiency with the high torque capability of this tool.
  · Special grip design provides an easy grip and comfortable fit.

  	Special Price
  Days to Ship:	12 Day(s)

• 

  Hex driver 135 mm to 220 mm

  EIGHT TOOL

  [Features]
  · Handle employs a high-quality acetate resin which feels good to the touch and is shock resistant.
  · It is designed for professionals so as to exceed ISO and JIS standards.
  [Applications]
  · For tightening hex socket head bolts.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hex Rod Type Screwdriver (Long)

  PB SWISS TOOLS

  A long screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
  [Features]
  · It can be used for general applications. Recyclable clip. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.
  · The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
  · The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
  · Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
  · Blade is nickel chrome-plated. Has excellent rust-resistance and long life.
  · The edge is lightly corner-cut, allowing the wrench to be easily inserted into screw holes.
  [Applications]
  · Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ball point hex screwdriver 206S series

  PB SWISS TOOLS

  A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
  [Features]
  · It can be used for general applications. Recyclable clip.
  · The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
  · The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
  · Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
  · With a precision ball point, screws on angled surfaces up to a 30° incline can be rotated.
  [Applications]
  · Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.
  * Cannot be used for final tightening.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Replacement Screwdriver Blades (Hexagon)

  PB SWISS TOOLS

  215 series hex screwdriver blade. Can be combined and used with 215A, 7215AG or 8215A handles for the replacement screwdrivers.

  Days to Ship:	12 Day(s)

• 

  Ratchet Driver Set 8510R-30SET

  PB SWISS TOOLS

  A set of ratchet screwdrivers.

  Days to Ship:	12 Day(s)

• 

  Ratchet Driver Set 8510R-100SET

  PB SWISS TOOLS

  A set of ratchet screwdrivers.

  Days to Ship:	50 Day(s)

• 

  Swiss Grip Nut Screwdriver

  PB SWISS TOOLS

  Nut driver made from 2 new materials: polypropylene and santoprene.
  [Features]
  · The symbol and size of the driver tip shape are shown on the rear of the handle.
  · A screwdriver suited for the task can be selected quickly.
  · The handle shape features the same ergonomic design as the Multi-craft.
  · The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.
  · With a special surface structure, the handle can be grasped firmly even with wet hands.
  · Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
  [Applications]
  · Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.

  Days to Ship:	12 Day(s)

• 

  Swiss Grip Ball Point Hex Screwdriver

  PB SWISS TOOLS

  Screwdriver made from 2 new materials: polypropylene and santoprene.
  [Features]
  · The symbol and size of the driver tip shape are shown on the rear of the handle. Allows quick selection of a screwdriver.
  · The handle shape features the same ergonomic design as the Multi-craft.
  · The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.
  · With a special surface structure, the handle can be grasped firmly even with wet hands.
  · Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
  · With a precision ball point, screws on angled surfaces up to a 30° incline can be rotated.
  [Applications]
  · Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.

  Days to Ship:	12 Day(s)

• 

  Cross-handled Nut Screwdriver

  PB SWISS TOOLS

  [Features]
  · This grip fits well in the palm of the hand, perfect for applying torque.
  · It is a long type that's useful in turning nuts in deep places.
  · The grip end of 202-4/4.5 includes a shaft that is convenient for quick turning

  Days to Ship:	12 Day(s)

• 

  Plate ratchet replacement screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · Ratchet operation in both right and left directions is possible with switching lever.
  · Rapid rotation is possible by rotating the gear with the fingertips.
  · Can use 6.3 mm width across flats hex bits.

  • STOCK

  Days to Ship:	8 Day(s)

Loading...