(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
ANEX Screwdrivers
| Days to Ship |
|
|---|
-
Days to Ship: 1 Day(s) -
Offset Ratchet Screwdriver (Bent-Up Head Type)
ANEX
[Features]
· Uses an ultra-thin type head ratchet structure for convenient work in a tight workspace.
· Magnet type chucking enables easy attachment and detachment of bits.
[Applications]
· For screw removal work in narrow places.- STOCK
Days to Ship: 1 Day(s) -
"NEJIPITA Ratchet Screwdriver" (Magnetic)
ANEX
[Features]
· A single ratchet driver capable of turning 4 types of screws, (+) No.1, (+) No.2, (+) No. 3 and (-) 6.
· The ratchet mechanism makes it possible to fasten screws with one hand.
[Applications]
· For screw removal work, etc.- STOCK
Days to Ship: 1 Day(s) -
ANEX
[Features]
·Compatible with 8 mm hexagonal shaft and single-headed bits.
·Bits for manual impact drivers.- STOCK
Days to Ship: 1 Day(s) -
Bis Breaker Screwdriver (Magnetic)
ANEX
With a special tip shape, you can rotate a stripped screw.
- STOCK
Days to Ship: Same day or more -
Superfit Double-Ended Precision Replacement Screwdriver Set
ANEX
[Features]
· A high-strength type with an elastomer resin handle.- STOCK
Days to Ship: 1 Day(s) -
Ultra-Stubby Mini Switchable Screwdriver
ANEX
Features
• Convenient for narrow space.
Specification
• Total Length（mm）:33
• SPQ（piece）:12
• Bit Replacement Type
• Blade Edge: u 6, y No.2 Replacement Bit- STOCK
Days to Ship: 12 Day(s) -
Quick Ball 60 Ratchet Screwdriver (Magnetic)
ANEX
[Features]
·60 gear teeth. Smooth rotation and excellent workability.
·A special minus shape that can be inserted into the removal hole of the wiring terminal.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·A replaceable bit that can also be used as an electric bit.
·With magnet (bit).
·The elastomer resin and ball-shaped handle are easy to apply force.
·The insertion angle is 6.35 mm.- STOCK
Days to Ship: 1 Day(s) -
Offset Ratchet Driver (Straight Type)
ANEX
[Features]
·For screwdrivers in narrow spaces.
·Ultra-thin head 21 mm by adopting ultra-short bit.
·19 mm total length ultra-short bit.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·Straight type.
[Applications]
·For work such as removing screws in narrow spaces.- STOCK
Days to Ship: 1 Day(s) -
"Quick Screwdriver for Electrical Work" (Magnetic)
ANEX
Feature
• A handle one size smaller. Workability is excellent because a large rotation angle can be tightened in a single rotational movement. With insulation tube.- STOCK
Days to Ship: 1 Day(s) -
Days to Ship: 1 Day(s) -
Stubby Phosphorescent Screwdriver (Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Made of martensitic special stainless steel (high strength stainless steel (550)).- STOCK
Days to Ship: 1 Day(s) -
"Superfit" ACR Heavy-duty Screwdriver (Magnetic)
ANEX
[Features]
·The shape of the tip has a structure that makes it difficult to come out (ACR (R) for the Phillips, serrated for the Slotted) to prevent the cutting edge from rising from the screw.
·With a hexagonal bolster, you can use a wrench to turn it more strongly.- STOCK
Days to Ship: 1 Day(s) -
Slit Power Screwdriver (Electric Type With Magnet)
ANEX
[Features]
· Non-slip, powerful slit shape and hexagon shape (grip end).- STOCK
Days to Ship: 1 Day(s) -
Slit power screwdriver (electric type/through/magnet included)
ANEX
[Features]
· Non-slip, powerful slit shape and hexagon shape (grip end).
· Includes a washer that can be hit with a hammer.- STOCK
Days to Ship: 1 Day(s) -
Stubby Phosphorescent Screwdriver (Stubby Type / Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Martensitic special stainless steel (high strength stainless steel (550)).- STOCK
Days to Ship: 1 Day(s) -
ANEX
Convenient for disassembling watches and eyeglasses, and for screwing precision instruments, etc.
Comes with a rotating cap.- STOCK
Days to Ship: 1 Day(s) -
"Superfit" Precision Screwdriver
ANEX
[Features]
· Has a square cross-section to increase work efficiency.
· Soft grip is adopted.- STOCK
Days to Ship: 1 Day(s) -
Replacement Power Screwdriver (Incorporating Magnet)
ANEX
[Features]
· A replacement type screwdriver which can be used with a screwdriver bit (subtense 6.35 mm hex shaft).
· The rear end of the handle can be used for turning eye bolts and thumb screws.
· The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
[Applications]
· + No. 2, -6 screwdriver
· Piston Rotation
· Wiring remover to be inserted in the terminal removing hole- STOCK
Days to Ship: 1 Day(s) -
"Mag Driver 22" Screwdriver (Magnetic)
ANEX
[Features]
· With a total length of 22 mm, even narrower spaces can be supported.
· Easy removal and refitting of bit.- STOCK
Days to Ship: 1 Day(s) -
ANEX
[Features]
・ Amazing number of gears 60
・ It rotates smoothly and has excellent workability
・ Stubby type that is convenient for narrow spaces
・ Ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle
・ It uses a strong elastomer resin handle for applying force easily
[Applications]
・ For tightening screws in narrow spaces- STOCK
Days to Ship: 1 Day(s) -
ANEX
[Features]
· Wide (large) handle that makes it easy to apply force. (Handle diameter 40 mm)
· Ultra-short stubby screwdriver, which can get into even narrow spaces.
· An ultra-short tool bit is used.
[Applications]
· Work in narrow spaces.- STOCK
Days to Ship: 16 Day(s) or more -
ANEX
[Features]
·Suitable for removing screws that require force.
·A single screwdriver can be used in two different ways: straight and T-shaped.
·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.
·T shape: For initial loosening and retightening that requires force.
·Straight type: For normal screwdrivers (fast turning).
·Bit replacement formula.
·With magnet (bit).
・ With storage case.- STOCK
Days to Ship: 1 Day(s) -
Days to Ship: 1 Day(s) -
Ratchet driver with flexible shaft
ANEX
[Features]
· Ideal for fastening screws on corners and edges.- STOCK
Days to Ship: 1 Day(s) -
Ratchet Type Mini Stubby Screwdriver
ANEX
[Features]
· Can be used in tight spaces thanks to the utilization of the Star B type ratchet mechanism.
[Applications]
· For screw removal work, etc.Days to Ship: 1 Day(s) -
Days to Ship: 1 Day(s) -
Screwdriver with Anti-Drop Ring
ANEX
The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.
- STOCK
Days to Ship: 1 Day(s) -
Replacement Screwdriver (Incorporating Magnet)
ANEX
Comes with a bolster which can be tightened or loosened with a wrench. An electric screwdriver bit (subtense 6.35 mm hex shaft) can be used. The Phillips part of the bit has double spikes (AAC) securely holding screws. The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
- STOCK
Days to Ship: 1 Day(s) -
Days to Ship: 1 Day(s) -
Compact ratchet 52 (straight type) set
ANEX
[Features]
·It is ultra-thin with a head width of 20 mm.
·For screwdrivers in narrow spaces.
·Smooth work with 52 fine gears.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·Uses ultra-short bits.- STOCK
Days to Ship: 1 Day(s) -
"Compact Ratchet 52" (Head-up Type)
ANEX
20 mm head width ultra-thin type. Easy to turn screws even in tight spaces with 52 gear fine feed angle. Uses an ultra-short tool bit (total length of 19 mm).
- STOCK
Days to Ship: 12 Day(s) -
Replacement Stubby Ratchet Screwdriver
ANEX
[Features]
· Rotates smoothly, with excellent workability.Days to Ship: 16 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX |
| Product Series | Slit power screwdriver (electric type/through/magnet included) | ||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | Same day or more | 1 Day(s) | 12 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 16 Day(s) or more | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 12 Day(s) | 16 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Tip standards | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) / Combination | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) / Combination | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) / Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Combination | Phillips (+) | Phillips (+)/Flathead(-) |
| Tip size / Phillips (+) | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.1 | No.2 | No.2 | No.1 / No.2 | No.2 | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.2 | No.1 | No.1 | No.2 | No.1 / No.2 | No.2 | No.1 / No.2 | No.1 / No.2 | No.2 | No.1 / No.2 | No.1 / No.2 | No.1 / No.2 | No.2 | No.2 | No.2 | No.1 / No.2 | No.2 | No.2 |
| Tip size / flathead (-) blade width (mm) B1 | 10 | 6 | 6 | - | - | 1.8 ～ 3 | 6 | 6 | 6 | - | - | - | - | - | - | - | - | - | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | - | 6 | - | 6 | - | 30 |
| Shaft length L (mm) | - | - | 28 ～ 93 | - | 75 ～ 150 | - | - | 95 | - | 75 ～ 150 | - | 75 ～ 100 | 75 ～ 100 | 75 ～ 200 | 75 ～ 150 | 35 | 24 | 100 ～ 150 | 135 | 9 | - | - | - | - | - | - | - | 100 ～ 150 | 135 | - | - | - | - |
| Single Product/Set Classification | Set Product | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item / Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Set Product | Set Product | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item |
| Shaft type | Round | Square | Square | Square | Round | Square | Round | Square | Square | Round | Round | Round | Round | Round | Round | Round | Round | Round | Square | - | Round | Round | Square | Round | Round | Round | - | Round | Round | - | - | - | Round |
| Magnet | NA | NA | Available | NA | Available | NA | NA | Available | NA | Available | NA | Available | Available | Available | Available | Available | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA |
| Shaft through | - | - | - | - | NA | - | - | - | - | NA | - | NA | Available | NA | Available | NA | NA | NA | - | - | - | - | - | - | - | - | - | NA | - | - | - | - | NA |
| Bolster | - | - | - | - | NA | - | - | - | - | NA | - | NA | Included | NA | NA | NA | NA | NA | - | - | - | - | - | - | - | - | - | NA | Included | - | - | - | NA |
| Grip Type | Rubber | Stainless Steel | Rubber | - | Rubber | Resin | Resin | Rubber | Stainless Steel | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Resin | Stainless Steel | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Stainless Steel | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | 1.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | 2.5 ～ 6 | - | - | - | - | - | - | 2.5 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ～ 6 | - | - | 2.5 ～ 6 | - | - | - | - | 2.5 ～ 6 | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 55
- 57
- 60
- 61
- 64
- 65
- 67
- 69
- 70
- 72
- 73
- 74
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 77
- 80
- 81
- 82
- 84
- 85
- 89
- 90
- 93
- 94
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 111
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 150
- 152
- 153
- 160
- 167
- 170
- 175
- 178
- 180
- 190
- 200
- 220
- 230
- 240
- 250
- 260
- 267
- 269
- 275
- 276
- 280
- 282
- 288
- 300
- 350
- 390
- 400
- 450
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- VESSEL (37)
- TRUSCO NAKAYAMA (34)
- ANEX (33)
- KTC(KYOTO TOOL) (24)
- TONE (24)
- ENGINEER (23)
- WERA (22)
- PB SWISS TOOLS (15)
- HIRAI KOGU (9)
- HOZAN (8)
- KO-KEN TOOL (5)
- SK 11 (5)
- BAHCO (4)
- WIHA (4)
- SUNFLAG (3)
- E VALUE (2)
- SUEKAGE TOOL (2)
- TRAD (2)
- FUJIYA (1)
- HANDIWORK (1)
- SMATO (1)
- SIGNET (1)
- ARC (0)
- HIOS (0)
- WEIDMULLER (0)
- TOP (0)
- AS ONE (0)
- ＫＬＥＩＮ ＴＯＯＬＳ (0)
- WILLIAMS (0)
- WAGO (0)
- HAZET (0)
- EIGHT TOOL (0)
- ESCO (0)
- BONDHUS (0)
- TEKIRO (0)
CAD
-
- 2D
- 3D
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy