(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

SANDVIK Turning Inserts

131 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

T-MaxP Insert X-Line CNMG

SANDVIK

[Features]
· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters
· Diamond-shaped 80° insert
· Negative insert

Days to Ship: 8 Day(s) or more
Sandvik T-Max P Lathe Negative Tip

SANDVIK

[Features]
· Coated carbide tip.
· Negative Insert
· Wiper Tip
[Applications]
· For General Steel Processing

Days to Ship: Quote
Sandvik CoroTurn 107 Lathe Positive Tip

SANDVIK

[Features]
· Coated carbide tip.
· Positive tips
[Applications]
· For General Steel Processing

Days to Ship: 35 Day(s) or more
T-Max P Lathe Negative Tip 4325

SANDVIK

[Features]
· Coated carbide tip.
· Negative Insert
[Applications]
· For General Steel Processing

Days to Ship: Quote
CoroCut 1/2 Insert For Profiling

SANDVIK

Days to Ship: 8 Day(s) or more
CoroCut 1 Plunging/Grooving CBN Tip

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CORO-TURN 107 CBN Positive Tip for Machining

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
T-Max P CBN Negative Insert For Turning (Diamond Shaped 80°)

SANDVIK

Days to Ship: 12 Day(s) or more
Sandvik CoroTurn 107 Lathe Positive Tip

SANDVIK

[Features]
· Coated carbide tip.
· Positive tips
· Wiper Tip
[Applications]
· For General Steel Processing

Days to Ship: Quote
Sandvik T-Max P Lathe Negative Tip

SANDVIK

[Features]
· Coated carbide tip.
· Negative Insert
[Applications]
· For General Steel Processing

Days to Ship: Quote
Sandvik T-Max P Lathe Negative Tip

SANDVIK

[Features]
· Coated carbide tip.
· Negative Insert
· Wiper Tip
[Applications]
· For General Steel Processing

Days to Ship: Quote
Ceramic Negative Tip for T-Max P Turning Tool

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
Positive Tip for T-Max S Turning Tool

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
T-Max U-Lock Grooving Tip

SANDVIK

Unique shape exhibits high performance

Days to Ship: Quote
T-Max CBN Tip for Turning

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
T-Max Ceramic Tip for Turning

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CoroCut 2 Plunging/Grooving Tip

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CoroCut 2 Plunging/Grooving Blank Tip

SANDVIK

Unique shape exhibits high performance

Days to Ship: 12 Day(s) or more
CoroCut MB Grooving Tip for Small Lathe

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
Cross-Thread 254 Circlip Grooving Tips

SANDVIK

Unique shape exhibits high performance

Days to Ship: 12 Day(s)
Cross-Thread 266 Thread Cutting CBN Tip

SANDVIK

Unique shape exhibits high performance

Days to Ship: 12 Day(s)
Cross-Thread 266 Thread Cutting Tip

SANDVIK

Unique shape exhibits high performance

Days to Ship: 12 Day(s)
CORO-TURN 107 Ceramic Positive Tip for Machining

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CORO-TURN 111 CBN Positive Tip for Machining

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CORO-TURN 111 Positive Tip for Machining

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CoroCut

SANDVIK

Sharp cutting edge and high performance

Days to Ship: 8 Day(s) or more
X-Line Chip (Negative)

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CORO-TURN

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
Ceramic tip (material 6060/6065)

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
Ceramic tip (for turning)

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
T-Max P Chip for Lathe Turning

SANDVIK

Unique shape exhibits high performance

Days to Ship: 8 Day(s) or more
CoroThread 266 Metric 60° With Finishing Blade

SANDVIK

[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For metric threads
Machining pitch: for 5.0 mm

Days to Ship: 12 Day(s)
CoroThread 266 UN 60° With Finishing Blade

SANDVIK

[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For inch threads
Machining pitch: for 5 threads

Days to Ship: 12 Day(s)
CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

SANDVIK

[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For 55° Whitworth threads
Machining pitch: for 5 threads

Days to Ship: 12 Day(s) or more
ISO Trapezoid 30° Thread Crest, With Chamfering Blade

SANDVIK

[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For trapezoidal 30° threads
Machining pitch: for 8 mm

Days to Ship: 12 Day(s)
CoroCut 1/2 For Grooving 123-GF

SANDVIK

[Features]
High clamp rigidity
For grooving
For low-feed machining
Seat size: F
Width: 2.39 mm

Days to Ship: 12 Day(s)
For Negative Insert Screw Clamp

SANDVIK

Days to Ship: 8 Day(s) or more
T-Max P CBN Negative Insert For Turning (Diamond Shaped 55°)

SANDVIK

[Features]
CBN insert
Diamond-shaped 55° insert
Precision class
Wiper insert
Negative insert
For machining high-hardness materials
For finishing

Days to Ship: 12 Day(s)
T-MaxP Insert X-Line WNMG

SANDVIK

[Features]
· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters
· Hex 80° insert
· Negative insert

Days to Ship: 8 Day(s) or more
T-Max S Insert For Turning

SANDVIK

Days to Ship: 12 Day(s)
T-Max Ceramic Insert For Grooving And Profiling Heat-Resistant Alloy And High Hardness Material

SANDVIK

Days to Ship: 8 Day(s) or more
T-Max Insert For Grooving

SANDVIK

Days to Ship: 8 Day(s) or more
T-Max Insert For Turning

SANDVIK

[Features]
T-Max S, carbide-coated insert for general machining
Precision class
Square-shaped insert
Positive insert
For general steel machining
Without breaker

Days to Ship: 12 Day(s) or more
T-MaxP Insert X-Line DNMG

SANDVIK

[Features]
· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters
· Diamond-shaped 55° insert
· Negative insert

Days to Ship: 8 Day(s) or more
CoroCut 1/2 Insert For Profiling Non-Ferrous Metal

SANDVIK

Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	Quote

Days to Ship:	35 Day(s) or more

Days to Ship:	Quote

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	Quote

Days to Ship:	Quote

Days to Ship:	Quote

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	Quote

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Shape
work material
Application
Available corners
Breaker Use
Rake angle
Nose R
Selfishly
Groove Width (For Grooving / Plunging)
Pitch (for Threading)
O.D./ I.D. (For Threading)
Screw Types (for threading)
Number of threads (for threading)


Brand	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	T-MaxP Insert X-Line CNMG	Sandvik T-Max P Lathe Negative Tip	Sandvik CoroTurn 107 Lathe Positive Tip	T-Max P Lathe Negative Tip 4325	CoroCut 1/2 Insert For Profiling	CoroCut 1 Plunging/Grooving CBN Tip	CORO-TURN 107 CBN Positive Tip for Machining	T-Max P CBN Negative Insert For Turning (Diamond Shaped 80°)	Sandvik CoroTurn 107 Lathe Positive Tip	Sandvik T-Max P Lathe Negative Tip	Sandvik T-Max P Lathe Negative Tip	Ceramic Negative Tip for T-Max P Turning Tool	Positive Tip for T-Max S Turning Tool	T-Max U-Lock Grooving Tip	T-Max CBN Tip for Turning	T-Max Ceramic Tip for Turning	CoroCut 2 Plunging/Grooving Tip	CoroCut 2 Plunging/Grooving Blank Tip	CoroCut MB Grooving Tip for Small Lathe	Cross-Thread 254 Circlip Grooving Tips	Cross-Thread 266 Thread Cutting CBN Tip	Cross-Thread 266 Thread Cutting Tip	CORO-TURN 107 Ceramic Positive Tip for Machining	CORO-TURN 111 CBN Positive Tip for Machining	CORO-TURN 111 Positive Tip for Machining	CoroCut	X-Line Chip (Negative)	CORO-TURN	Ceramic tip (material 6060/6065)	Ceramic tip (for turning)	T-Max P Chip for Lathe Turning	CoroThread 266 Metric 60° With Finishing Blade	CoroThread 266 UN 60° With Finishing Blade	CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade	ISO Trapezoid 30° Thread Crest, With Chamfering Blade	CoroCut 1/2 For Grooving 123-GF	For Negative Insert Screw Clamp	T-Max P CBN Negative Insert For Turning (Diamond Shaped 55°)	T-MaxP Insert X-Line WNMG	T-Max S Insert For Turning	T-Max Ceramic Insert For Grooving And Profiling Heat-Resistant Alloy And High Hardness Material	T-Max Insert For Grooving	T-Max Insert For Turning	T-MaxP Insert X-Line DNMG	CoroCut 1/2 Insert For Profiling Non-Ferrous Metal
Days to Ship	8 Day(s) or more	Quote	35 Day(s) or more	Quote	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	12 Day(s) or more	Quote	Quote	Quote	8 Day(s) or more	8 Day(s) or more	Quote	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	12 Day(s) or more	8 Day(s) or more	12 Day(s)	12 Day(s)	12 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	12 Day(s)	12 Day(s)	12 Day(s) or more	12 Day(s)	12 Day(s)	8 Day(s) or more	12 Day(s)	8 Day(s) or more	12 Day(s)	8 Day(s) or more	8 Day(s) or more	12 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Shape	C (80° Diamond-Shape)	-	-	-	Other	Other	C (80° Diamond-Shape)	C (80° Diamond-Shape)	-	-	-	R (Circular)	T (Triangle)	-	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	Other	Other	Other	T (Triangle)	T (Triangle)	-	R (Circular)	T (Triangle)	C (80° Diamond-Shape)	Other	T (Triangle)	D (55° Diamond-Shape)	S (Rectangular)	T (Triangle)	V (35° Diamond-Shaped)	T (Triangle)	-	-	-	-	T (Triangle)	D (55° Diamond-Shape)	W (Hexagonal Type)	T (Triangle)	Other	Other	S (Rectangular) / T (Triangle)	D (55° Diamond-Shape)	Other
work material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-	-	-	-	Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	High Hardness Material	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	-	-	-	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-	High Hardness Material	Cast Iron / Non-ferrous metal / High Hardness Material	Steel / Stainless Steel	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	High Hardness Material	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Cast Iron	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	-	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron	Cast Iron / High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel	Heat-resistant alloy, titanium alloy / High Hardness Material	Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-
Application	Outer Diameter/Inner Diameter	-	-	-	Grooving / Parting	Grooving / Parting	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	-	-	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting	Grooving / Parting	Grooving / Parting	Grooving / Parting	Threading	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Threading	-	-	-	Grooving / Parting	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting	Grooving / Parting	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting
Available corners	4	-	-	-	1	1	2	2	-	-	-	1	3	-	2	2	2	1	1	3	1	-	1	3	2	1	3	2	4	3	2	3	3	3	3	1	3	2	6	3	1	1	3 / 4	4	1
Breaker Use	Finish / Medium grinding / Medium to deep grinding	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Medium grinding	-	Finish / Medium grinding	Finish / Medium grinding	-	-	Finish / Medium grinding	Finish	-	-	-	-	Finish / Medium grinding	-	Finish / Medium grinding / Medium to deep grinding	-	-	-	-	Finish / Medium grinding	-
Rake angle	Negative	-	-	-	-	-	Pozidriv	Negative	-	-	-	Negative	-	-	Negative	Negative	-	-	-	-	-	-	Pozidriv	Pozidriv	Pozidriv	-	Negative	Pozidriv	Negative	Negative	Negative	-	-	-	-	-	-	Negative	Negative	-	-	-	-	Negative	-
Nose R	0.4 ～ 1.6	-	-	-	Other	Other	0.4 ～ 0.8	0.4 ～ 1.6	-	-	-	Other	0.2 ～ 1.2	-	0.8 ～ 1.2	0.8 ～ 1.2	Other	0.2	Other	Other	-	-	Other	0.4 ～ 0.8	0.2 ～ 0.8	0.4	0.4 ～ 0.8	0.2 ～ Other	0.8 ～ Other	0.8 ～ 1.2	0.8 ～ 1.2	-	-	-	-	0.2	Other	0.4 ～ 1.2	0.4 ～ 1.2	0.4	Other	Other	0.4 ～ 1.2	0.4 ～ 0.8	Other
Selfishly	No-hand	-	-	-	Left-hand	No-hand	No-hand	No-hand	-	-	-	No-hand	No-hand	-	No-hand	No-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand	Right-hand	-	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	Right-hand	Right-hand	Right-hand	Right-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	Left-hand / No-hand
Groove Width (For Grooving / Plunging)	-	-	-	-	2.00 mm	3.00mm ～ 8.00mm	-	-	-	-	-	-	-	-	-	-	3.0mm	2.7mm ～ 3.8mm	1.00mm ～ 3.00mm	3.15mm ～ 4.15mm	-	-	-	-	-	4.00mm ～ 6.00mm	-	-	-	-	-	-	-	-	-	3.00 mm	-	-	-	-	3.17 mm ～ 9.52 mm	6.35 mm ～ 12.7 mm	-	-	2.00 mm
Pitch (for Threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1.5-3mm	-	-	-	-	-	-	-	-	-	-	0.50 mm ～ 2.00 mm	-	-	4 mm	-	-	-	-	-	-	-	-	-	-
O.D./ I.D. (For Threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Internal Diameter	-	-	-	-	-	-	-	-	-	-	Internal Diameter	Internal Diameter	Outer Diameter / Internal Diameter	Outer Diameter / Internal Diameter	-	-	-	-	-	-	-	-	-	-
Screw Types (for threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	ISO Meter 60°	unified 60°	-	Trapezoid 30°	-	-	-	-	-	-	-	-	-	-
Number of threads (for threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	16-8TPI	-	-	-	-	-	-	-	-	-	-	-	16 TPT	9 TPI ～ 20 TPI	-	-	-	-	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Shape
Clear

work material
Clear

Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
Clear

Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
Clear

Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
Clear

Rake angle
- Negative
- Pozidriv
Clear

Nose R
0.2

0.4

0.8

1.2

1.6

Other
Clear

Selfishly
Clear

Groove Width (For Grooving / Plunging)
0.2 mm

0.4 mm

0.5～3.18

0.8 mm

1

1.00mm

1.20mm

1.25

1.45

1.50 mm

1.80mm

1.85

2

2.00 mm

2.0(±0.1)

2.20mm

2.2(±0.1)

2.30

2.4(±0.1)

2.5

2.50 mm

2.70

2.7mm

2.8

2.90

3

3.00 mm

3.00mm

3.0mm

3.00 mm

3.0 mm

3.0(±0.05)

3.0(±0.1)

3.1(±0.1)

3.15mm

3.17 mm

3.17 mm

3.18 mm

3.40

3.5

3.8mm

4

4.00mm

4.00 mm

4(±0.05)

4.0(±0.05)

4.1(±0.1)

4.15mm

4.3

4.5

4.60

4.75 mm

4.75 mm

4.8(±0.1)

4.90

5

5.00mm

5(±0.05)

5.1(±0.1)

5.5

6

6.00mm

6.35 mm

6.35mm

6.35 mm

6.4(±0.1)

7.93 mm

8.00mm

8(±0.05)

8.0(±0.1)

9.52 mm

9.525 mm

9.6(±0.1)

12.7 mm
Clear

Pitch (for Threading)
0.2 to 0.75

0.20～0.75

0.4～0.5～1.0

0.4 to 1.25

0.5

0.50 mm

0.50-3.0

0.5-1.5

0.50-1.5

0.5-1.50

0.5-1.25

0.50 to 1.25

0.5–1.5

0.5～3

0.529～1.58

0.75

0.75 to 1.25 mm

0.75 to 1.5 mm

0.75–1.5

0.8

0.8–1.5

0.80～1.50

1

1.0 to 1.5

1.00～1.50

1.0 to 1.75

1.00～2.00

1.0–2.5

1.25

1.5

1.5-3mm

1.5~2

1.5–2.5

1.50～3.00

1.75

1.75-3.0

1.75～3

2

2.00 mm

2.5

2.5–3.5

2.5–4

3

3.5

3.50-5.0

3.5~5

3.5～5　

4

4 mm

4–6

4.5

5

5.5

6
Clear

O.D./ I.D. (For Threading)
- Outer Diameter
- Internal Diameter
- Dual Purpose
Clear

Screw Types (for threading)
- ISO Meter 60°
- unified 60°
- General Purpose 60°
- Whitworth 55°
- General Purpose 55°
- Parallel for Pipes 55°
- Taper for Pipes 55°
- For American Tube 60°
- Trapezoid 30°
- England BSPT55°
Clear

Number of threads (for threading)
6 ～ 4

8

9 TPI

10 TPI

10 ～ 6

10 ～ 7

11

11 TPI

11.5

12

14

14 TPI

14 to 10

16

16 TPI

16 TPT

16-8TPI

16 to 8

16 ～ 12

18

19

20

20 TPI

24

24 to 12

24 to 16

28

28 to 18 inches

28 to 20 inches

48～16
Clear

Narrow search by specifying Manufacturer

- MISUMI (7)
- Economy series (0)
- KYOCERA (580)
- SUMITOMO ELECTRIC HARDMETAL (555)
- SANDVIK (131)
- MITSUBISHI MATERIALS (93)
- NGK SPARK PLUG (78)
- ISCAR (31)
- NOGA JAPAN (11)
- TUNGALOY (9)
- BIG DAISHOWA SEIKI (8)
- SANWA SEISAKUSYO (8)
- OSG (4)
- MITSUBISHI HITACHI TOOL (2)
- KOSHUHA (1)
- WIDIA (1)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Turning Inserts

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

SANDVIK Turning Inserts

Configure

Specification/Dimensions

Shape

work material

Application

Available corners

Breaker Use

Rake angle

Nose R

Selfishly

Groove Width (For Grooving / Plunging)

Pitch (for Threading)

O.D./ I.D. (For Threading)

Screw Types (for threading)

Number of threads (for threading)

Narrow search by specifying Manufacturer

CAD

Related Categories to Turning Inserts

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

SANDVIK Turning Inserts

Configure

Specification/Dimensions

Shape

work material

Application

Available corners

Breaker Use

Rake angle

Nose R

Selfishly

Groove Width (For Grooving / Plunging)

Pitch (for Threading)

O.D./ I.D. (For Threading)

Screw Types (for threading)

Number of threads (for threading)

Narrow search by specifying Manufacturer

CAD

Related Categories to Turning Inserts

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB