Tensioners (for Idler Set)

• 

  Tensioner Units with Idler-Height Configurable

  MISUMI

  Tension can be adjusted in the following two directions: “Push” and “Pull.” The mount heights of idler can be selected.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Tensioner Unit-Slotted Hole Type/Adjustment Screw Type

  MISUMI

  A tensioner unit that is easy to install. Available with chain and belt drive.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Slide Plate for Tension

  MISUMI

  This is the slide plate of the tensioner unit (TNSR). Can be used by attaching directly to the side plate.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Tensioner Unit-Link Bar Type

  MISUMI

  A tensioner for intermediate tension that can be easily installed by simply drilling a hole in the side plate.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Chain Tensioners/Idler Set

  MISUMI

  Tensioners for intermediate tensioning which allows tension to be adjusted just by rotating the shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  THB Series Tight Holder

  KATAYAMA CHAIN

  [Features]
  ・ It is a chain tensioning device that can be easily and severely adjusted by using eccentric pins.
  ・ The manufacturer recommends using a tight holder to increase the transmission efficiency of the chain and to maintain the lifespan of the chain.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Tight Master TM Series, Automatic Tensioner (TMB)

  KATAYAMA CHAIN

  [Features]
  ・ Chain growth triggers reduced transmission efficiency
  ・ It accelerates the wear of chains and sprockets, and shortens their lifespan
  ・ KANA Tightmaster has a standard idler and is an automatic tension type with a built-in spring

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Flex Holder, YSA

  NABEYA BI-TECH

  [Features]
  · Uses Neidhardt rubber springs for unique non-linear spring characteristics.
  · Automatically adjusts belt tension.
  · The rubber spring part and the driver mounting arm can be assembled in any of four directions.
  · Also, the rubber spring part can be adjusted while still fixed to machinery.
  · Maximum allowable twist angle is ±30°.
  · The operating temperature range is from -42°C to +85°C.
  · The material and finishing are: SS400 and bright chromate plating for the main body, and the rubber is NR.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Flex Holder_YSB

  NABEYA BI-TECH

  [Features]
  · Uses Neidhardt rubber springs for unique non-linear spring characteristics.
  · Automatically adjusts belt tension.
  · Can be easily mounted with 1 bolt (included).
  · Rotates 360°, and the position of the idler can be freely adjusted.
  · Maximum allowable twist angle is ±32°.
  · The operating temperature range is from -42°C to +85°C.
  · Material and finishing: Steel, trivalent chromate processing.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Base holder_YFB

  NABEYA BI-TECH

  Made from FC200, with electrostatic paint coating (black).

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Flat Spanner FLS

  KONISHI

  Tension support base. 2 types of idler bolt length are available.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Side holder_YFS

  NABEYA BI-TECH

  Made from FC200, with electrostatic paint coating (black).

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Straight Tightener, Crank Tightener (SRT, CRT)

  IMAO CORPORATION

  [Features]Simple tightener in straight or crank shape. [Specifications]Main Body: steel (SPHC), cationic paint, black

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Screw Adjustment Tightener (SAT)

  IMAO CORPORATION

  Tension can be easily adjusted with a hex wrench. Has a large stroke and powerful tension.
  
  [Features]
  · Has a large stroke and powerful tension.
  · AST-1 Mount direction can be changed with a bracket

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Aluminum Spanner AL-1

  KONISHI

  Tension support base made from aluminum. 2 types of idler bolt length are available.

  Days to Ship:	11 Day(s) or more

• 

  Aluminum Spanner AL-2

  KONISHI

  Tension support base made from aluminum. 2 types of idler bolt length are available.

  Days to Ship:	13 Day(s) or more

• 

  Stand Spanner ST-R

  KONISHI

  Tension support base. Type that can be adjusted to the optimal position if the serration bolt is loosened. 2 types of stand spanner with different shaft heights are available. 2 types of idler bolt length are also available.

  Days to Ship:	12 Day(s) or more

• 

  Stand Spanner ST-S

  KONISHI

  Tension support base. 2 types of stand spanner with different shaft heights are available. 2 types of idler bolt length are also available. The spanner and idler combination set product is super-convenient.

  Days to Ship:	12 Day(s) or more

Loading...