Screwdrivers（Tip size / Phillips (+)：No.0）

• 

  Micro Screwdriver Set - 6 pcs

  WERA

  Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.

  • STOCK

  Days to Ship:	8 Day(s) or more

• 

  Precision Screwdriver 6-Piece Set D-20

  HOZAN

  Highly versatile precision screwdriver set.
  [Features]
  · (+) No. 0 / (+) No. 1 / (-) 1.2 × 0.32 / (-) 1.8 × 0.32 / (-) 2.3 × 0.35 / (-) 3.0 × 0.45 set.
  · Stitched fabric case included
  [Applications]
  · Highly efficient rotating head type. Ideal for turning small screws quickly.

  • STOCK

  Days to Ship:	13 Day(s) or more

• 

  Crystalline Screwdriver (Thin Shaft Type)

  VESSEL

  Crystalline handle. Shines like a crystal. Has a thin, long shape; ideal for tightening screws in tights spaces.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Replacement Precision Screwdriver Set

  PB SWISS TOOLS

  Interchangeable precision screwdriver set.
  
  [Features]
  · Roll case included.
  · Blade Length: 120 mm

  Days to Ship:	35 Day(s)

• 

  SwissGrip Cross-head Screwdriver

  PB SWISS TOOLS

  Screwdriver made from 2 new materials: polypropylene and santoprene.
  [Features]
  · The symbol and size of the driver tip shape are shown on the rear of the handle.
  · A screwdriver suited for the task can be selected quickly.
  · The handle shape features the same ergonomic design as the Multi-craft.
  · The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.
  · With a special surface structure, the handle can be grasped firmly even with wet hands.
  · Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
  [Applications]
  · Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.

  Days to Ship:	12 Day(s)

• 

  Ceramic Adjustment Screwdriver No.9000

  VESSEL

  Adjustment screwdriver.
  [Features]
  · The cutting edge is made of nonmagnetic ceramic.
  · Uses a non-conductive and nonmagnetic zirconia ceramic tip.
  · For coil and trimmer adjustment.
  [Applications]
  · For the adjustment of electronic components and audio/computer/communication equipment.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Screwdriver Set (8 pieces set)

  TRUSCO NAKAYAMA

  A set made up of tools with electrician's grips for sizes that are frequently used.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Screwdriver Set

  TRUSCO NAKAYAMA

  A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Superfit Double-Ended Precision Replacement Screwdriver Set

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Plastic Handle Precision Screwdriver

  TRUSCO NAKAYAMA

  [Features]
  · A precision screwdriver with strengthened tip, using nickel-chrome-molybdenum vanadium steel.
  · Lightweight and easy to use as it has a plastic handle.
  · Comes with rotating cap.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Cross-Head Screwdriver Tip Size No. 00 to 2

  HOZAN

  A screwdriver enabled to \ deal with screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
  [Features]
  · Hole diameter is compatible with deep screws because the shaft has a thinner finish than even JIS standards.
  · Shaft is thin but still complies with JIS "torsional strength" standards.
  · The basic hardening treatment for shaft strength is skilled full quenching.
  · The polypropylene grip with pen clip, which can be inserted into your pocket, has both strength and lightness.
  · Thin and tough electroless nickel plating is used to maintain accuracy.
  [Applications]
  · Ideal for screws in deep places as often seen with home appliances.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Micro Screwdriver

  WERA

  [Features]
  · Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.

  • STOCK

  Days to Ship:	Quote

• 

  Baby Screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · It is a resin grip that is hard, durable, and prevents dirt.
  · The shaft is round.
  [Applications]
  · General purpose tool

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Micro Screwdrivers (Set of 3)

  VESSEL

  A set of three precision screwdrivers in sizes which are used frequently. Easy-to-use slender clip with a tip cap for quick turning.
  [Features]
  · Two types are available according to the type of precision work.
  · Frequently used sizes make up a set.
  [Applications]
  · For adjustment and repair of precision instruments, electrical equipment, glasses, watches, etc.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Soft Finish® ESD Screwdriver Set (Set of 5)

  WIHA

  A 5-piece screwdriver set of Soft Finish® ESD anti-static stubby screwdrivers, including 3 Phillips screwdrivers and 2 flathead screwdrivers.

  Days to Ship:	16 Day(s) or more

• 

  Craft Form, Compact VDE60 Set

  WERA

  Replacement insulated drivers are collected in a compact, convenient, hand-held case.

  Days to Ship:	12 Day(s)

• 

  Crystalline Screwdriver (Precision Type) No. 6900

  VESSEL

  Ultra-fine screwdriver ideal for precision work.
  [Features]
  · The grip is made of plant-derived crystalline that's eco-friendly and resistant to oil and chemicals.
  · Color-coded by Phillips or flathead.
  · For extremely precise work.
  · The end of the handle has a concave shape that allows fingertips to be used to push against and perform quick turning.
  · Cellulose acetate resin is used.
  · Hexagonal cross section accurately transmits torque.
  [Applications]
  · General precision work.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  "Magazine Bit Screwdriver" (Magnetic)

  TRUSCO NAKAYAMA

  [Features]
  · The magnet prevents internal fluctuations, which allows for smooth work and mitigates discomfort.
  · It has an ergonomic handle certified by GS that's gentle on hands and prevents fatigue.
  · A detachable hex shaft adapter type that can be plugged into an electric screwdriver.
  · Supports 8 sizes with a single unit.
  · The head of the main body is an open type magnetic cap specification and can be used to store 7 bits.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Craft Form Screwdriver

  WERA

  [Features]
  · The lasered tip provides exceptional bite into screws.
  · Special grip design provides an easy grip and comfortable fit.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  ESD Microdriver

  WERA

  [Features]
  · Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
  · This product conforms to European Standard EN100-015-1.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Stubby Phillips Screwdriver

  PB SWISS TOOLS

  A stubby type that's ideal for narrow spaces.
  

  Days to Ship:	12 Day(s)

• 

  No.9900 Micro Screwdriver

  VESSEL

  Straight type blade tip microdriver.
  [Features]
  · The handle has a rotary cap for quick turning. The cutting edge has undergone high precision black point processing.
  · Fully quenched Chrome Vanadium Steel.
  [Applications]
  · For adjustment and repair of precision instruments, electrical equipment, glasses, watches, etc.

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Interchangeable Micro Screwdriver

  WERA

  Micro screwdriver set for precision work.
  [Features]
  ・ Interchangeable.
  ・ Handle + bit set.
  ・ With a zone that can rotate quickly.
  ·Comes with a precision adjustment aim (hexagonal).
  ・ Designed to transmit stronger torque with your fingers.
  ・ Comes with a dedicated pouch that can be securely stored.
  [Applications]
  ・ Ideal for assembling electronic parts, etc.

  Days to Ship:	12 Day(s)

• 

  Ceramic Adjustable Screwdriver D-271/D-272/D-275

  HOZAN

  A long screwdriver that's convenient for adjustment inside equipment.
  [Features]
  · Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
  · Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
  [Applications]
  · The 110 mm long shaft makes it ideal for adjusting parts in deep places.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Interchangeable Ceramic Adjustable Screwdriver D-281

  HOZAN

  A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
  [Features]
  · Uses zirconia ceramic that does not cause coil misalignment.
  · Has greater durability against wear and damage than alumina ceramics.
  * Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
  · Combination contents: D-281, Phillips No.0 (D-284), cross-shaped, blade width 1.7 mm (D-285).

  Days to Ship:	12 Day(s)

• 

  Ceramic Adjustment Screwdriver Set D-17

  HOZAN

  A long screwdriver that's convenient for adjustment inside equipment.
  [Features]
  · With a sewn case that is resistant to friction and pulling.
  · Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
  · Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
  [Applications]
  · The 110 mm long shaft makes it ideal for adjusting parts in deep places.

  Days to Ship:	12 Day(s)

• 

  Ergonomic Screwdriver

  BAHCO

  Based on ergonomics, it is easier to grip and leads to prevention of injuries.
  
  [Features]
  · A bolster (with a hex bolt) is installed where the grip and the shaft meet, increasing the tightening torque when using a wrench and pliers in combination.
  · The non-fading, bit-shape identifying color coding and symbol display applied on the shaft portion side of the grip and on the grip end allow users to recognize the bit shape almost instantly. The same tools are used to prevent racing car pit crews, for whom every second counts, from choosing the wrong tool. Allows the user to strike the grip end with a hammer, similar to using a through screwdriver.
  · Adopts a small-diameter round shaft that can be easily tightened and loosened.
  · The moderate length of the grip neck fits fingers well and enables quick rotation and accurate torque control.
  · Handle with 3 major features. Ergo-grip, bit shapes with color-coded coatings, and symbols, with a comfortable ergo-grip inner structure for strength and robustness. The handle has a bar code.
  · Designed to take advantage of the round cross section and to fit without any resistance regardless of which direction it is held.
  · The surface of the anti-slip grip is corrugated for maximum comfort, and a soft high-friction material is used. Enables maximum grip even with oily hands.
  · This flat part stops the screwdriver from rolling.
  · Holes for display. Can also be used to prevent falls from high places by threading with a string.
  · The grip end is large and round, so it allows the user to apply force when performing tightening and loosening work, without feeling any pain in the palm.

  Days to Ship:	16 Day(s) or more

• 

  Standard Driver

  ENGINEER

  Standard-type Phillips screwdrivers and flathead screwdrivers.
  [Features]
  · Selection of various sizes is enabled in accordance with work applications.
  [Applications]
  · For work tightening and removing Phillips screws/flathead screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Screw Catch Driver

  ENGINEER

  Tip retains high screw precision, improving work performance in deep spaces.

  Days to Ship:	1 Day(s)

• 

  Bit Set DR-10 – 17

  ENGINEER

  A bit set with wide lineup, optimal for service engineers.
  [Features]
  · Bit set containing frequently used bits for a variety of applications, from short bits and long stepped bits to hex bits and more.
  · Includes burette type holder for convenient bit storage and carrying.
  · DR-16 is a bit set that is ideal for rechargeable/electric screwdrivers.
  [Applications]
  · Assembly of machinery, demolition work, maintenance of equipment, work inside factories, etc.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Pro Use Screwdriver

  ENGINEER

  Knurled driver can perform rapid turning.
  [Features]
  · The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.
  · A large grip that produces high clamping force.
  [Applications]
  · For tightening and removing various screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Master Grip Screwdriver Set DR-52

  ENGINEER

  Master grip screwdriver set equipped with frequently used magnetized strong bits.
  [Features]
  · Bit set that is also ideal for rechargeable or electric screwdrivers.
  · The bit is made of chrome vanadium steel.
  · Burette type bit holder for convenient mobility.
  · A cushioned grip which fits well into the hand.
  [Applications]
  · For tightening and removing various screws.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Torque Vario(R) Set

  WIHA

  Tightening torque has a ±6% margin of error
  
  [Features]
  · 1.0-5.0 Nm Torque Vario and Universal Bit Holder with Phillips, Torx, 10 hex bits and a Torque Setter for a 13-piece set.
  · German style tough metallic case included

  Days to Ship:	16 Day(s) or more

• 

  Annex precision screwdriver

  ANEX

  Convenient for disassembling watches and eyeglasses, and for screwing precision instruments, etc.
  Comes with a rotating cap.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  "Superfit" Precision Screwdriver

  ANEX

  [Features]
  · Has a square cross-section to increase work efficiency.
  · Soft grip is adopted.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Precision Screwdriver

  ANEX

  [Features]
  · A long shaft type.
  · Comes with rotating cap.
  · Acetate Resin Handle

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Precision Screwdriver Set (Set of 3)

  HIRAI KOGU

  [Features]
  · A 2-way set with a variably adjustable shaft length (18-100 mm).
  [Applications]
  · Precision screwdriver.
  · A screwdriver for watches, glasses, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  "Long Magazine Bit Screwdriver" (Magnetic)

  TRUSCO NAKAYAMA

  [Features]
  · Supports 8 sizes with a single unit.
  · The head of the main body is an open type magnetic cap specification and can be used to store 7 bits.
  · The magnet prevents internal fluctuations, which allows for smooth work and mitigates discomfort.
  · It has an ergonomic handle certified by GS that's gentle on hands and prevents fatigue.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Craft Form Plus Screwdriver

  WERA

  [Features]
  · The lasered tip provides exceptional bite into screws.
  · Special grip design provides an easy grip and comfortable fit.
  · Equipped with a bolster that can be firmly tightened with a wrench, etc.

  Days to Ship:	12 Day(s)

• 

  Craft Form Stainless Steel Screwdriver

  WERA

  [Features]
  · Special grip design provides an easy grip and comfortable fit.

  Days to Ship:	12 Day(s)

• 

  Plastic Screwdriver Stand (Standard)

  PB SWISS TOOLS

  A Phillips screwdriver with excellent shock resistance.
  [Features]
  · It can be used for general applications. Recyclable clip.
  · The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
  · The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
  · Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
  · The shock resistance is 1 t. Resistant to oil and gasoline.
  [Applications]
  · Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.

  Days to Ship:	12 Day(s)

• 

  Replacement Precision Screwdriver Blade

  PB SWISS TOOLS

  53 series blade. Can be combined and used with 53 TELESCOPE handles for replacement screwdrivers.

  Days to Ship:	35 Day(s)

• 

  Multi Craft Phillips Screwdriver

  PB SWISS TOOLS

  The multi-craft grip has a large outer diameter, making it easy to apply torque.
  
  [Features]
  · Multicraft handle that makes it easy to apply torque and does not slip even if hands are oily.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  6-pc.precision screwdriver set FPD-6S

  FUJIYA

  It uses brass material that is superior in antirust effect for the handle members.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Plate Ratchet Replacement Driver

  KTC(KYOTO TOOL)

  [Features]
  · This is a 6.3 mm subtense shaft bit set usable with panel ratchet replacement driver (TMDB8, RM22, RM32).

  • STOCK

  Days to Ship:	12 Day(s)

Loading...