(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Spindles
| Days to Ship |
|
|---|
-
Air Motor Spindle MSS-25 Series Straight Type
NAKANISHI
[Features]
· Outer diameter material: high hardness tempered stainless steel
· Exhaust utilizes back air recovery method and includes a silencer.Standard Price: 21,905,254 IDR- Days to Ship: 26 Day(s) or more -
NAKANISHI
Nakanishi, spindle, collet chuck, CHK group.
[Compatible Chuck Nut]
K-265/CHN-BStandard Price: 1,298,686 IDR- Days to Ship: 1 Day(s) or more -
UHT
[Features]
· Holder mounting type / standard holder mounting type.
· Rear direct ventilationStandard Price: 7,837,278 IDR Days to Ship: 8 Day(s) or more -
Manual Tool Replacement Spindle NRR-3060
NAKANISHI
[Features]
· Enables single-action replacement of tools using a lever action.
· The spindle part and motor part can be freely combined enabling model selection based on the machining application.Standard Price: 19,016,923 IDR Days to Ship: 15 Day(s) -
80,000 min-1 Compatible Motor Spindle HES810-BT30
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining. Also extends tool life.
· Uses ceramic bearings. Higher durability compared to steel bearings. Enables improved rigidity and machining conditions.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free. Carbon brush powder dust is even less likely to get into the bearing extending life.Standard Price: 61,129,132 IDR Days to Ship: 26 Day(s) or more -
NAKANISHI
[Features]
· The spindle part and motor part can be freely combined enabling model selection based on the machining application.
· If the program is changed often, replacing of the spindle enables a diversity of shape changes.
· Simplifies replacement during repair.Standard Price: 13,076,923 IDR Days to Ship: 12 Day(s) -
NAKANISHI
[Features]
· The spindle part and motor part can be freely combined enabling model selection based on the machining application.
· If the program is changed often, replacing of the spindle enables a diversity of shape changes.
· Simplifies replacement during repair.Standard Price: 15,560,000 IDR Days to Ship: 35 Day(s) -
NAKANISHI
[Features]
· The spindle part and motor part can be freely combined enabling model selection based on the machining application.
· If the program is changed often, replacing of the spindle enables a diversity of shape changes.
· Simplifies replacement during repair.Standard Price: 5,301,000 IDR Days to Ship: 11 Day(s) -
ø30 Motor Spindle (Uses CHK Collet) EM30-S6000
NAKANISHI
[Features]
· Overall length shortened compared to integrated type making mounting to small space saving NC lathe/dedicated machines easy.Standard Price: 37,200,000 IDR Days to Ship: 35 Day(s) -
NAKANISHI
Nakanishi, spindle, collet chuck, CHR group.
[Compatible models]
NR50-5100,ATCStandard Price: 1,062,617 IDR Days to Ship: 8 Day(s) or more -
E4000 Series Motor Spindle (Integrated Type) Straight Cord Type BMS-4020
NAKANISHI
[Features]
· Through reduction in overall spindle length, mounting to small space saving NC lathes/dedicated machines is easy.Standard Price: 80,279,693 IDR Days to Ship: 35 Day(s) -
Standard Price: 7,128,000 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 11,276,769 IDR Days to Ship: 25 Day(s) -
Standard Price: 7,275,949 IDR Days to Ship: 8 Day(s) or more -
UHT
[Features]
· Holder mounting type / standard holder mounting type.
· Rear direct ventilationStandard Price: 8,105,327 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 7,419,313 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 7,419,313 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 7,151,265 IDR Days to Ship: 8 Day(s) or more -
UHT
[Features]
· Holder mounting type / standard holder mounting type.
· With rear ventilation control valveStandard Price: 7,524,000 IDR Days to Ship: 8 Day(s) or more -
UHT
[Features]
· Holder mounting type / standard holder mounting type.
· With rear ventilation control valveStandard Price: 8,105,327 IDR Days to Ship: 8 Day(s) or more -
Air Motor Spindle MSST-23 Series Straight Type
NAKANISHI
[Features]
· Outer diameter material: high hardness tempered stainless steel
· Exhaust utilizes back air recovery method and includes a silencer.Standard Price: 21,395,921 IDR- Days to Ship: 15 Day(s) or more -
NAKANISHI
[Features]
· The spindle part and motor part can be freely combined enabling model selection based on the machining application.
· If the program is changed often, replacing of the spindle enables a diversity of shape changes.
· Simplifies replacement during repair.Standard Price: 14,727,539 IDR Days to Ship: Quote -
NAKANISHI
[Features]
· The spindle part and motor part can be freely combined enabling model selection based on the machining application.
· If the program is changed often, replacing of the spindle enables a diversity of shape changes.
· Simplifies replacement during repair.Standard Price: 11,887,082 IDR Days to Ship: 15 Day(s) or more -
NAKANISHI
[Features]
· The spindle part and motor part can be freely combined enabling model selection based on the machining application.
· If the program is changed often, replacing of the spindle enables a diversity of shape changes.
· Simplifies replacement during repair.Standard Price: 5,095,216 IDR Days to Ship: 26 Day(s) or more -
Collet Chuck CHA Group High Accuracy AA Grade Type
NAKANISHI
Nakanishi Spindle Collet Chuck CHA Group High Precision Class AA Type.
Standard Price: 1,611,558 IDR Days to Ship: 8 Day(s) or more -
Lever Type Quick Change Spindle NRR3060-QC
NAKANISHI
[Features]
· Utilizes lever type chucking method enabling quick and simple replacement of collet holders.
· Use of a collet holder enables preparation of tools separate from the machine greatly improving setup workability.
· Two types of collets (CHK 0.5 mm to 6.35 mm, CHA 0.5 mm to 4.0 mm) can be selected.Standard Price: 19,045,539 IDR Days to Ship: Quote -
ø20 Motor Spindle (Uses CHA Collet) EM20-S6000
NAKANISHI
[Features]
· Overall length shortened compared to integrated type making mounting to small space saving NC lathe/dedicated machines easy.Standard Price: 34,946,154 IDR Days to Ship: 35 Day(s) -
NAKANISHI
Nakanishi, spindle, Grip Ring, GR-30.
[Accessories]
Mounting bolt (GR-30) M5 × 25: 3 piecesStandard Price: 1,537,974 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 1,461,672 IDR Days to Ship: 16 Day(s) or more -
Air Type Quick Change Spindle NR4040-AQC
NAKANISHI
[Features]
· Utilizes a chucking method based on air drive enabling quick and simple collet holder replacement.
· Use of a collet holder enables preparation of tools separate from the machine greatly improving setup workability.
· Two types of collet holders selectable, allowing for a broad range of sizes of collets (CH16, CHK).Standard Price: 63,126,154 IDR Days to Ship: 35 Day(s) -
E4000 Series Motor Spindle (Integrated Type) Angle Cord Type BMS-4020RA
NAKANISHI
[Features]
· Through reduction in overall spindle length, mounting to small space saving NC lathes/dedicated machines is easy.Standard Price: 84,105,539 IDR Days to Ship: 35 Day(s) -
E4000 Series Motor Spindle (Integrated Type) Angle Cord Type BMS-4040RA
NAKANISHI
[Features]
· Through reduction in overall spindle length, mounting to small space saving NC lathes/dedicated machines is easy.Standard Price: 91,527,231 IDR Days to Ship: 35 Day(s) -
80,000 min-1 Compatible Motor Spindle HES810-BT40/NT40
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining. Also extends tool life.
· Uses ceramic bearings. Higher durability compared to steel bearings. Enables improved rigidity and machining conditions.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free. Carbon brush powder dust is even less likely to get into the bearing extending life.Standard Price: 62,827,212 IDR Days to Ship: 26 Day(s) or more -
80,000 min-1 Compatible Motor Spindle HES810-IT40
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining. Also extends tool life.
· Uses ceramic bearings. Higher durability compared to steel bearings. Enables improved rigidity and machining conditions.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free. Carbon brush powder dust is even less likely to get into the bearing extending life.Standard Price: 62,827,212 IDR Days to Ship: 26 Day(s) or more -
80,000 min-1 Compatible Motor Spindle HES810-BT50
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining. Also extends tool life.
· Uses ceramic bearings. Higher durability compared to steel bearings. Enables improved rigidity and machining conditions.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free. Carbon brush powder dust is even less likely to get into the bearing extending life.Standard Price: 66,223,145 IDR Days to Ship: 26 Day(s) or more -
80,000 min-1 Compatible Motor Spindle HES810-ST32
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining. Also extends tool life.
· Uses ceramic bearings. Higher durability compared to steel bearings. Enables improved rigidity and machining conditions.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free. Carbon brush powder dust is even less likely to get into the bearing extending life.Standard Price: 58,582,239 IDR Days to Ship: 26 Day(s) or more -
50,000 min-1 Compatible Motor Spindle HES510-BT30/NT30(M)
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining.
· Uses ceramic bearings. Higher durability compared to steel bearings.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free.
· Carbon brush powder dust will not get into the bearing extending life.Standard Price: 38,206,187 IDR Days to Ship: 26 Day(s) or more -
50,000 min-1 Compatible Motor Spindle HES510-BT40/NT40(M)
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining.
· Uses ceramic bearings. Higher durability compared to steel bearings.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free.
· Carbon brush powder dust will not get into the bearing extending life.Standard Price: 39,904,039 IDR Days to Ship: 26 Day(s) or more -
50,000 min-1 Compatible Motor Spindle HES510-IT40
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining.
· Uses ceramic bearings. Higher durability compared to steel bearings.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free.
· Carbon brush powder dust will not get into the bearing extending life.Standard Price: 39,904,039 IDR Days to Ship: 26 Day(s) or more -
50,000 min-1 Compatible Motor Spindle HES510-BT50/NT50(M)
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining.
· Uses ceramic bearings. Higher durability compared to steel bearings.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free.
· Carbon brush powder dust will not get into the bearing extending life.Standard Price: 43,300,200 IDR Days to Ship: 26 Day(s) or more -
50,000 min-1 Compatible Motor Spindle HES510-IT50
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining.
· Uses ceramic bearings. Higher durability compared to steel bearings.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free.
· Carbon brush powder dust will not get into the bearing extending life.Standard Price: 43,300,200 IDR Days to Ship: 26 Day(s) or more -
50,000 min-1 Compatible Motor Spindle HES510-ST32
NAKANISHI
[Features]
· Spindle runout accuracy is within 1 μm, enabling high accuracy machining.
· Uses ceramic bearings. Higher durability compared to steel bearings.
· Use of a brushless motor makes replacement of carbon brushes unnecessary and so is maintenance-free.
· Carbon brush powder dust will not get into the bearing extending life.Standard Price: 35,659,067 IDR Days to Ship: 13 Day(s) or more -
NAKANISHI
Nakanishi, spindle, collet chuck, CHA group.
[Compatible Chuck Nut]
K-263/CHN-AStandard Price: 1,062,617 IDR- Days to Ship: 8 Day(s) or more -
NAKANISHI
[Features]
This tool prevents workpieces from being scratched and also provides heavy-duty gripping and fixing.
Compatible model: ABS-1600Standard Price: 1,161,902 IDR Days to Ship: 16 Day(s) or more -
NAKANISHI
[Features]
This tool prevents workpieces from being scratched and also provides heavy-duty gripping and fixing.
Compatible model: PL2000Standard Price: 583,620 IDR Days to Ship: 16 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Format |
| Maximum Engine Speed(min-1) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NAKANISHI | NAKANISHI | UHT | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | UHT | UHT | UHT | UHT | UHT | UHT | UHT | UHT | UHT | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI |
| Product Series | E4000 Series Motor Spindle (Integrated Type) Straight Cord Type BMS-4020 | E4000 Series Motor Spindle (Integrated Type) Angle Cord Type BMS-4020RA | E4000 Series Motor Spindle (Integrated Type) Angle Cord Type BMS-4040RA | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 26 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 15 Day(s) | 26 Day(s) or more | 12 Day(s) | 35 Day(s) | 11 Day(s) | 35 Day(s) | 8 Day(s) or more | 35 Day(s) | 8 Day(s) or more | 25 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 15 Day(s) or more | Quote | 15 Day(s) or more | 26 Day(s) or more | 8 Day(s) or more | Quote | 35 Day(s) | 8 Day(s) or more | 16 Day(s) or more | 35 Day(s) | 35 Day(s) | 35 Day(s) | 26 Day(s) or more | 26 Day(s) or more | 26 Day(s) or more | 26 Day(s) or more | 26 Day(s) or more | 26 Day(s) or more | 26 Day(s) or more | 26 Day(s) or more | 26 Day(s) or more | 13 Day(s) or more | 8 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more |
| Product Type | Main Body | Part | Main Body | - | - | Main Body | Main Body | Main Body | Main Body | Part | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | - | - | Part | Main Body | Main Body | - | Part | - | - | Main Body | - | - | - | - | - | - | - | - | - | - | Part | - | - |
| Format | Straight | - | Straight | - | - | Straight | Straight | Straight | - | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | Angle | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Engine Speed(min-1) | 1500 ～ 24000 | - | 75000 | - | - | 50000 | 60000 | 30000 | 60000 | - | 20000 | 75000 | 75000 | 75000 | 75000 | 75000 | 75000 | 75000 | 75000 | 75000 | 2000 ～ 30000 | 40000 | - | - | - | 60000 | 60000 | - | - | - | - | 40000 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Spindles
-
- Disk Grinders (Pneumatic)
- Pneumatic Grinders
- Micro Grinders (Pneumatic)
- Angle Grinders
- Sanders (Pneumatic)
- Belts (Pneumatic)
- Files (Pneumatic Hand Tools)
- Impact Screwdrivers (Pneumatic)
- Screwdrivers (Pneumatic Tools)
- Impact Wrenches (Pneumatic)
- Drills (Pneumatic Tools)
- Ratchet Wrenches
- Air Saws
- Nippers (Pneumatic Tools)
- Blast
- Hammers / Hammer Drills (Pneumatic)
- Bevellers
- Air Blow Guns
- Air Dusters
- Air Chisels
- Spindles
- Vibrators
- Compressors
- Other Tools including Accessories
-
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy