Cable Bushings（Page2）

• 

  Grommet with filmSG series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Grommet with film. (SG)

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Drain PlugDWP Series

  TAKACHI ELECTRONICS ENCLOSURE

  Drain Plug (DWP)
  
  [Features]
  · A plug for draining water from outdoor equipment boxes.
  · Mountable by cutting a hole in the bottom panel of the box and inserting.
  · Please use with the cap attached.
  · This plug can also be used with other manufacturer’s control panels.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  NG Series Grommet【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・Grommet (NG)

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  BCAS・BCAL dedicated blind plug BCM series

  TAKACHI ELECTRONICS ENCLOSURE

  BCAS/BCAL Dedicated Blind Plug (BCM)
  
  [Features]
  An optional part for use with latch hinges.
  · Cannot be mounted if a cover screw is used on the box.

  Days to Ship:	9 Day(s) or more

• 

  Hole plugs HPL Series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Hole Plugs (HPL)
  
  [Features]
  · Small hole plug with 4 sizes of hole diameters: φ5, φ5.5, φ7, and φ8.
  · Material properties include elasticity using TPE (an elastomer) and silicon rubber.
  · Supported installation plate thickness is 1.0 mm to 3.0 mm.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Small hole plugs MHD series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Small Hole Plugs (MHD)
  
  [Features]
  · Small hole plug with 4 sizes of hole diameters: φ5, φ5.5, φ7, and φ8.
  · Material properties include elasticity using TPE (an elastomer) and silicon rubber.
  · Supported installation plate thickness is 1.0 mm to 3.0 mm.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  PMF type protective vent

  TAKACHI ELECTRONICS ENCLOSURE

  PMF Type Protective Vent
  
  [Features]
  The protective vent can adjust for the pressure changes within the enclosure, where hot and cold differences in temperature are generated. It does so via a membrane filter that allows ventilation, but not water or dust.
  In addition, there are measures to discharge water vapor to prevent condensation within the enclosure.
  There are specifications for IP68 (water depth 2M/1hr.) waterproof and dustproof performance, for flame resistance in the range from -40°C to 125°C, and for harsh environments such as outdoor workplaces.
  Added high air flow PMF-12HA.
  For outdoor installation, mounting on a side surface is recommended.
  This product is for use only in the electronics industry.
  Not to be used for production facilities dealing with foodstuffs, cosmetics, drugs, or medical devices.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  For BP14-S Cable Bushing and Steel Cabinets

  NITTO KOGYO

  It is easy to insert cables into or remove them from the BP14-S type bushing.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Relay box accessories (blind cap)【10 Pieces Per Package】

  OHM ELECTRIC

  Relay box accessories (blind cap)

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Edge protection: edge protectors with adhesive【1-50 Pieces Per Package】

  HELLERMANNTYTON

  [Features]
  · Includes adhesive for firm, rapid, and precise mounting to the panel cutout.
  · Transparent adhesive for a beautiful finish.
  · 20 m reeled version available to be cut to desired lengths, as well as a convenient bagged version for smaller 250 mm cut lengths.
  · A small box on the reeled version provides reference gradations when cutting, and it can be used as a functional storage box.

  Days to Ship:	9 Day(s) or more

• 

  Edge preservation and free bushing【100 Pieces Per Package】

  HELLERMANNTYTON

  For protecting wiring that passes through the cut portions of a panel. Can handle holes of any shape with its superior flexibility.
  
  [Features]
  Provides flexibility using 6 Nylon and can handle holes of any shape.
  Mounting can be simply performed by simply fitting in the edge of the opening and when used for openings with large circumferential dimensions, the product can also be used for supplementary purposes.
  Strong vibration and shock resistance with excellent abrasion resistance provides unparalleled protection for wiring.

  Days to Ship:	9 Day(s) or more

• 

  BU-3270 Series

  SATOPARTS

  [Features]
  · 3 sizes of cord stoppers for use with various cord types.
  · Safe and reliable product manufactured in Japan.

  Days to Ship:	9 Day(s) or more

• 

  BU-4796-A

  SATOPARTS

  [Features]
  · BU-4796-A cord bushing with nut tightening.
  · Safe and reliable product manufactured in Japan.

  Days to Ship:	9 Day(s) or more

• 

  BU-4796-B

  SATOPARTS

  [Features]
  · BU-4796-B cord bushing with nut tightening.
  · Safe and reliable product manufactured in Japan.

  Days to Ship:	9 Day(s) or more

• 

  BU-4796-C

  SATOPARTS

  [Features]
  · BU-4796-C cord bushing with nut tightening.
  · Safe and reliable product manufactured in Japan.

  Days to Ship:	9 Day(s) or more

• 

  BU-4801

  SATOPARTS

  [Features]
  · Cord bushing with one touch attachment.
  · Safe and reliable product manufactured in Japan.

  Days to Ship:	9 Day(s) or more

• 

  BU-687 Series【1-100 Pieces Per Package】

  SATOPARTS

  [Features]
  · Rubber bushing with 4 size options.
  · Safe and reliable product manufactured in Japan.

  Days to Ship:	9 Day(s) or more

• 

  Blind Cap【100 Pieces Per Package】

  KSS(KAI SUH SUH ENTERPRISE)

  Taiwan KSS Inc. is amongst the world’s top wiring accessories manufacturers.
  
  [Features]
  • This black blind cap can be mounted at the touch of a button.
  · One-touch mounting is possible using the round holes of the panel for plate thicknesses from 0.8 mm to 3.2 mm (no tools required).
  • An abundant selection is available with mounting holes ranging from φ8 to 30 mm.

  Days to Ship:	11 Day(s) or more

• 

  Includes an oven-type slit [OSB-13].【100 Pieces Per Package】

  KSS(KAI SUH SUH ENTERPRISE)

  Taiwan KSS Inc. is amongst the world’s top wiring accessories manufacturers.
  
  [Features]
  • Bushings can be added after passing wires through the panel hole.
  · One-touch mounting is possible using the round holes of the panel for plate thicknesses from 0.8 mm to 3.2 mm (no tools required).
  • This type has a slit opening that allows bushings to be added after passing wire bundles through the panel hole.

  Days to Ship:	11 Day(s) or more

• 

  Open Type Snap Bushing【100 Pieces Per Package】

  KSS(KAI SUH SUH ENTERPRISE)

  Taiwan KSS Inc. is the world’s leading wiring accessories manufacturer. One-touch mounting snap bushing - can be mounted and fixed in a round panel hole via one touch operation
  
  [Features]
  · One touch mounting is possible using round panel holes for plate thicknesses ranging from 0.8 mm to 3.2 mm (no tools required).
  · We offer a wide range of size from mounting hole diameters ranging from φ7.9mm - 29.7mm.
  · * Since there is no slit, wiring should be passed through after fixing the bushing to the panel holes.

  Days to Ship:	11 Day(s) or more

• 

  Cord Stopper Mounting Tool

  KSS(KAI SUH SUH ENTERPRISE)

  Dedicated mounting tool for cord stoppers (SR series manufactured by Taiwan KSS Inc., the world’s leading manufacturer of wiring accessories
  
  [Features]
  · Dedicated tool designed to make cord stopper mounting easier.
  · Dedicated tool for mounting the cord stopper to the panel.
  · Makes mounting work easier.
  · By removing the screw from the pivot, the size of the cord stopper jaw can be changed.
  · * Take care when unscrewing the screw from the pivot as the spring may pop out.
  · By changing the position of the rack (4 stages) it is possible to adjust the length of the opening from 0 - 33mm

  Days to Ship:	11 Day(s) or more

• 

  Edge-guard【5 Pieces Per Package】

  DENKA ELECTRON

  Bushing for thin plates that can be installed to the edge of the opening.
  
  [Features]
  · Corresponds with trends towards thinner the plate thicknesses.
  · Also supports ultra thin 0.8 mm thicknesses.

  Days to Ship:	11 Day(s) or more

• 

  Features soft edging.

  DENKA ELECTRON

  Can cover a range of sizes. Opening edge features easy-to-mount bushings.
  · Available in a wide range of sizes from 0.6 to 6.4 mm, enabling it to fit a variety of applications.
  
  [Features]
  For each size there is a wide range of corresponding panel thicknesses, and each item can cover a range of sizes.
  · Traditionally, handling curves or round shapes has been difficult, but Denka’s edging is extremely soft and can also be used for curved areas.
  · No adhesive required.
  · Product may be cut to any length requested.

  Days to Ship:	9 Day(s) or more

• 

  Free bushing【10 Pieces Per Package】

  DENKA ELECTRON

  This bushing can be easily mounted to an aperture edge.

  Days to Ship:	9 Day(s) or more

• 

  Multi-link cable ground: rubber bushing

  MURRPLASTIK

  Rubber bushing for multi-link cable gland

  Days to Ship:	9 Day(s) or more

• 

  Swivel bushing【100 Pieces Per Package】

  NIX

  Swivel bushing that is suitable for 3 sizes of plate thickness from 1.6 mm to 3.2 mm. Corresponds freely to cuts matching the outer dimensions of holes regardless of shape.

  Days to Ship:	11 Day(s) or more

• 

  BCAS・BCAL dedicated blind plug BCM series

  BOXCO

  A BCAS/BCAL dedicated blind plug (BCM)
  
  [Features]
  · A special optional part for use with the latch hinge option.
  · This plug cannot be mounted if cover screws are used on the box.

  Days to Ship:	11 Day(s) or more

• 

  Blind Plugs OSK Series

  ENSTO

  [Features]
  Blind Plugs (OSK)

  Days to Ship:	11 Day(s) or more

• 

  Drain PlugDWP Series

  ENSTO

  Drain Plug (DWP)
  
  [Features]
  · Plug for draining water from boxes installed outdoors.
  · Mountable by forming a hole in the bottom surface of the box and placing it on a mount.
  · Please use with the cap attached.

  Days to Ship:	9 Day(s) or more

• 

  JKG Model Nylon with Free Bushing【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  A replacement product for the discontinued JB Series.
  
  [Features]
  · Protects wires by mounting to the cross-sectional surface of machine-drilled holes.
  · Use by cutting and applying to cross-sectional surface of the machine-drilled holes.

  Days to Ship:	9 Day(s) or more

• 

  RB type rubber bushing【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · TMC series specific rubber bushing.
  · Use for case cable outer diameters of φ8 to φ9 mm.

  Days to Ship:	9 Day(s) or more

• 

  Rubber bushings for use with THB387 and THB391.【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Rubber bushings for use with THB387 and THB391 series products.
  · Use for working with thin diameter cables or removing multiple wires.
  · When used with wires of less than φ7.0 mm, 6000347LA can prevent rubber bushings from protruding
  and ensure stable waterproof properties. Use as required.

  Days to Ship:	9 Day(s) or more

• 

  Rubber Bushings for Use with THB390, 400, 401L, 402T, 399Y, and THA209【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Rubber bushing for use with THB series and THA209 series (cannot be used with THB387 or THB391 series). Use for working with thin diameter cables or removing multiple wires.
  · When used with wires of less than φ7.0 mm, 6000087LF can prevent rubber bushings from protruding and stabilize waterproof properties. Use as required.
  · Not for use with THB400-0-17 series.

  Days to Ship:	9 Day(s) or more

• 

  Base For Mounting Component EA948GP-1

  ESCO

  【Product Specifications】
  ・For use to mount components to control panel, power distribution panel, distribution board, etc.
  ・Fixing of parts/components is also possible at the places where welding cannot be done.
  ・Fitting suitable screw-M3
  ・Body color-Orange

  Days to Ship:	12 Day(s) or more

• 

  Base For Mounting Component EA948GP-11

  ESCO

  【Product Specifications】
  ・For use to mount components to control panel, power distribution panel, distribution board, etc.
  ・Fixing of parts/components is also possible at the places where welding cannot be done.
  ・Fitting suitable screw-M3
  ・Body color-Orange

  Days to Ship:	12 Day(s) or more

• 

  Base For Mounting Component EA948GP-2

  ESCO

  【Product Specifications】
  ・For use to mount components to control panel, power distribution panel, distribution board, etc.
  ・Fixing of parts/components is also possible at the places where welding cannot be done.
  ・Fitting suitable screw-M4
  ・Body color-Yellow

  Days to Ship:	12 Day(s) or more

• 

  Base For Mounting Component EA948GP-3

  ESCO

  【Product Specifications】
  ・For use to mount components to control panel, power distribution panel, distribution board, etc.
  ・Fixing of parts/components is also possible at the places where welding cannot be done.
  ・Fitting suitable screw-M4
  ・Body color-Black

  Days to Ship:	9 Day(s) or more

• 

  Insulated Rubber Bushing [10 Pcs] EA948HG-16【10 Pieces Per Package】

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…16
  ・Qty.…10

  • Volume Discount

  Days to Ship:	9 Day(s) or more

• 

  Insulated Rubber Bushing [10 Pcs] EA948HG-19

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…19
  ・Qty.…10

  Days to Ship:	11 Day(s) or more

• 

  Insulated Rubber Bushing [10 Pcs] EA948HG-22

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…22
  ・Qty.…10

  Days to Ship:	12 Day(s) or more

• 

  Insulated Rubber Bushing [10 Pcs] EA948HG-25

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…25
  ・Qty.…10

  Days to Ship:	11 Day(s) or more

• 

  Insulated Rubber Bushing [5 Pcs] EA948HG-31【5 Pieces Per Package】

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…31
  ・Qty.…5

  Days to Ship:	11 Day(s) or more

• 

  Insulated Rubber Bushing [5 Pcs] EA948HG-36

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…36
  ・Qty.…5

  Days to Ship:	11 Day(s) or more

• 

  Insulated Rubber Bushing [5 Pcs] EA948HG-39

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…39
  ・Qty.…5

  Days to Ship:	9 Day(s) or more

• 

  Insulated Rubber Bushing [3 Pcs] EA948HG-51【3 Pieces Per Package】

  ESCO

  【Product Specifications】
  ・Can be used for insulation and wire protection of electric cable pipes, distribution boards, pull boxes, etc.
  ・Groove dia. (mm)…51
  ・Qty.…3

  Days to Ship:	11 Day(s) or more

Loading...