(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（Page2）

584 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less

TSC Series Carbide Uneven Lead 4-Flute Square End Mill

MISUMI

The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)

Volume Discount
Days to Ship: 16 Day(s) or more
DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC

NACHI(FUJIKOSHI)

End mill for aluminum, suitable for a wide range of side wall machining, grooving deep grooves or grooving in deep locations.

Days to Ship: 16 Day(s) or more
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.

Days to Ship: 12 Day(s) or more
GS MILL 2-Flute Blade 2GS

NACHI(FUJIKOSHI)

Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 2D GSX4C-2D

NACHI(FUJIKOSHI)

[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting

Days to Ship: 16 Day(s) or more
X's Mill Geo 4XSGEO

NACHI(FUJIKOSHI)

Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.

Days to Ship: 11 Day(s) or more
Anchor V 2-Flute 2CE

NACHI(FUJIKOSHI)

General purpose carbide end mill. Suitable for grooving.

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 1D GSX4C-1D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE

OSG

[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.

Days to Ship: 2 Day(s) or more
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE

OSG

[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.

Days to Ship: 2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE

OSG

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

	Special Price
Days to Ship:	Same day or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS

OSG

General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.

Days to Ship: 10 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS

OSG

General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.

Days to Ship: 12 Day(s) or more
WXS Coated Multiple Flutes Short Super_FXS-CR-EMS

OSG

High-speed machining end mill with extremely high tool rigidity. High speed machining of hardened steel is also possible.

Days to Ship: 12 Day(s) or more
NX-35 Lead 35 End Mill

NS TOOL

The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining

Days to Ship: 10 Day(s) or more
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill

NS TOOL

Standard type that can be used with versatility for grooves or sides

Days to Ship: 12 Day(s) or more
MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill

NS TOOL

Capable of high-precision and high-performance machining due to the unique, highly rigid design

Days to Ship: 16 Day(s) or more
Epoch, Power Mill Regular Flute Length EPP4□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Features unequal division and irregular lead, which prevents chattering during high-speed high-efficiency processing.

Days to Ship: 12 Day(s)
MUGEN-COATING PREMIUM 2-Flute LEAD 25 End Mill MXH225

NS TOOL

Supports heat-resistant alloys such as stainless steel, titanium, etc. Design with increased rigidity minimizes chattering and deflection during grooving

Days to Ship: 16 Day(s) or more
MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P

NS TOOL

Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is 3x the blade diameter and the torsion angle is 35°

Days to Ship: 16 Day(s) or more
MUGEN-COATING 4-Flute End Mill MSE445

NS TOOL

Adopts a unique Infinity coating for 4-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute End Mill Sharp Corner GSX40000S-2D

SUMITOMO ELECTRIC HARDMETAL

The reliability in wet processing has been improved by adopting an ultra-fine particle carbide base metal with high transverse rupture strength and thermal shock resistance. Lifespan and reliability have been improved by adopting a GSX coating with increased wear and heat resistance.

Days to Ship: 16 Day(s) or more
Solid Spiral End Mill SSM2000 Type

SUMITOMO ELECTRIC HARDMETAL

Standard type of SSM type.
Work Material: General Steel/Cast Iron/Aluminum
Coating: Uncoated
Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.) 2
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)

Days to Ship: 16 Day(s) or more
SED2 Square End Mill, 2-Flute, Non-Coated

OKAZAKI SEIKO

An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.

Days to Ship: 10 Day(s) or more
Epoch Panacea Square, 4-Flute HGOS4□□□-PN

MITSUBISHI HITACHI TOOL

[Features]
· PN coating with phenomenal adhesion resistance and abrasion resistance.
· Enables machining of a wide range of work materials.

Days to Ship: 12 Day(s)
Spiral Cut End Mill SPC type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 10 Day(s) or more
All Purpose Square End Mill Regular 2-Flute 3635

GUHRING

Machining is possible with a wide range of materials, from raw materials to hardened materials.

Days to Ship: 16 Day(s) or more
Carbide Miniature End Mill KMSE‐2

KYOWA SEIKO

[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
CoroMill Plura Carbide Square End Mill 2P

SANDVIK

High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

Days to Ship: 16 Day(s) or more
Carbide 4-Flute Variable Split Variable Lead End Mill 43°/48° E144X

7 LEADERS

[Features]
· 4-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.
· It supports high-speed side cutting.

Days to Ship: 10 Day(s) or more
Router for CFRP (2-Flute / Herringbone Type)

OSG

[Features]
· CFRP Router Series
[Applications]
· Work materials: Composite materials.
[Material]
· Cemented Carbide

Days to Ship: 16 Day(s) or more
GSX MILL VL Hard 2.5D GSXVLH6-2.5D

NACHI(FUJIKOSHI)

[Features]
· Unequal division and unequal lead enable high-speed and high-grade processing.
· For high-hardness materials.

Days to Ship: 11 Day(s) or more
MUGEN-COATING 2-Flute Super Short End Mill MSE230SS

NS TOOL

[Features]
· 2-flute end mill with NS Tool's unique MUGEN coating.
· Capable of universal cutting, from roughing to finishing.

Days to Ship: 16 Day(s) or more
Coated (TiAIN) Solid Carbide End Mills (4 Flutes, Pin Angle) IC4SSVP

THE CUT

[Features]
· Sharp corners
· Outstanding cost performance
· Capable of machining a wide range of workpieces from raw materials up to alloy steel.
· TiAlN coated for a longer tool life.

Days to Ship: 16 Day(s) or more
MUGEN-COATING LEAD30 End Mill

NS TOOL

Days to Ship: 12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

On Sale Till 31/03/2025

(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

MISUMI

The Misumi's unique lineup of fine flute length is available at attractive low prices

Volume Discount

XAL
General Steel
2 Flutes

	Special Price
Days to Ship:	Same day or more

XAC series carbide square end mill, 2-flute / short model

MISUMI

[Specification]
·Standard TiAlN coating

Volume Discount

TiAlN

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
XAC series carbide square end mill, 4-flute / long model

MISUMI

User friendly TiAlN coated series with long flute length

Volume Discount

TiAlN

General Steel

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suitable for high-speed machining with stub flute length that is 1.5 times the cutting diameter
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 2-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide square end mill, 2-flute / 2.5D Flute Length model

MISUMI

The lineup of fine intermediate flute length between short and regular is available only in Misumi

Volume Discount

TS

General Steel

2 Flutes

SR
Days to Ship: 16 Day(s) or more
TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
2-flute regular size that can be used for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
TSC series carbide square end mill, 2-flute / 3.5D Flute Length model

MISUMI

Lineups of fine intermediate flute length between regular and long are available only in MISUMI.

Volume Discount

TS

General Steel

2 Flutes

RL
Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

												On Sale Till 31/03/2025																									On Sale Till 31/03/2025
Brand	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	MITSUBISHI HITACHI TOOL	NS TOOL	NS TOOL	NS TOOL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	OKAZAKI SEIKO	MITSUBISHI HITACHI TOOL	DIJET	GUHRING	KYOWA SEIKO	SANDVIK	7 LEADERS	OSG	NACHI(FUJIKOSHI)	NS TOOL	THE CUT	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	TSC Series Carbide Uneven Lead 4-Flute Square End Mill	DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC	GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D	GS MILL 2-Flute Blade 2GS	GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D	GSX MILL 4-Flute Blade 2D GSX4C-2D	X's Mill Geo 4XSGEO	Anchor V 2-Flute 2CE	GSX MILL 4-Flute Blade 1D GSX4C-1D	Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE	Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE	Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS	WXS Coated Multiple Flutes Short Super_FXS-CR-EMS	NX-35 Lead 35 End Mill	MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill	MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill	Epoch, Power Mill Regular Flute Length EPP4□□□ [Alteration Supported Product]	MUGEN-COATING PREMIUM 2-Flute LEAD 25 End Mill MXH225	MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P	MUGEN-COATING 4-Flute End Mill MSE445	GSX MILL 4-Flute End Mill Sharp Corner GSX40000S-2D	Solid Spiral End Mill SSM2000 Type	SED2 Square End Mill, 2-Flute, Non-Coated	Epoch Panacea Square, 4-Flute HGOS4□□□-PN	Spiral Cut End Mill SPC type	All Purpose Square End Mill Regular 2-Flute 3635	Carbide Miniature End Mill KMSE‐2	CoroMill Plura Carbide Square End Mill 2P	Carbide 4-Flute Variable Split Variable Lead End Mill 43°/48° E144X	Router for CFRP (2-Flute / Herringbone Type)	GSX MILL VL Hard 2.5D GSXVLH6-2.5D	MUGEN-COATING 2-Flute Super Short End Mill MSE230SS	Coated (TiAIN) Solid Carbide End Mills (4 Flutes, Pin Angle) IC4SSVP	MUGEN-COATING LEAD30 End Mill	(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model	XAC series carbide square end mill, 2-flute / short model	XAC series carbide square end mill, 4-flute / long model	TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model	TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model	TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model	TSC series carbide square end mill, 2-flute / 2.5D Flute Length model	TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model	TSC series carbide square end mill, 2-flute / 3.5D Flute Length model
CAD
Days to Ship	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	2 Day(s) or more	2 Day(s) or more	Same day or more	10 Day(s) or more	12 Day(s) or more	12 Day(s) or more	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s)	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	12 Day(s)	10 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications																																					XAL General Steel 2 Flutes	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes SR	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes RL
Blade diameter (D)(φ)	2 ～ 25	3 ～ 20	0.2 ～ 20	0.2 ～ 20	1 ～ 20	1 ～ 20	1.1 ～ 32	1 ～ 20	1 ～ 20	0.1 ～ 12	0.1 ～ 30	0.2 ～ 12	0.2 ～ 30	2 ～ 30	1.5 ～ 30	0.5 ～ 12	0.1 ～ 12	1 ～ 12	3 ～ 20	0.1 ～ 6	0.1 ～ 6	2 ～ 12	3 ～ 8	2	0.4 ～ 32	1 ～ 20	15 ～ 38	1 ～ 20	0.1 ～ 3	2 ～ 20	1 ～ 20	6 ～ 12	6 ～ 20	0.15 ～ 5.9	1 ～ 30	0.1 ～ 12	0.1 ～ 20	1 ～ 20	3 ～ 12	0.5 ～ 12	0.5 ～ 20	0.1 ～ 20	0.5 ～ 12	0.2 ～ 20	0.5 ～ 12
Blade length (ℓ)(mm)	4 ～ 50	12 ～ 56	0.5 ～ 50	0.4 ～ 38	1.5 ～ 30	2 ～ 40	6 ～ 70	3 ～ 38	1 ～ 20	0.15 ～ 18	0.2 ～ 60	0.8 ～ 48	0.4 ～ 45	6 ～ 45	5 ～ 55	1.5 ～ 36	0.2 ～ 24	5 ～ 60	8 ～ 38	0.1 ～ 6	0.3 ～ 18	5 ～ 30	7.5 ～ 19	6	1 ～ 55	2.5 ～ 40	26 ～ 55	-	0.2 ～ 8	-	3 ～ 50	18 ～ 36	15 ～ 50	0.1 ～ 5.9	3 ～ 55	0.2 ～ 24	0.3 ～ 60	2.5 ～ 38	12 ～ 30	0.5 ～ 12	0.75 ～ 30	0.2 ～ 40	1.25 ～ 30	0.6 ～ 60	1.75 ～ 42
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	3 ～ 16	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	17 ～ 73	20 ～ 55	23 ～ 92	26 ～ 65
Shank diameter (d)(mm)	6 ～ 25	6 ～ 20	4 ～ 20	3 ～ 20	4 ～ 20	4 ～ 20	4 ～ 32	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 32	4 ～ 12	3 ～ 32	4 ～ 32	6 ～ 32	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 20	4 ～ 6	4 ～ 6	4 ～ 12	3 ～ 8	4	4 ～ 32	4 ～ 20	16 ～ 32	3 ～ 20	3	2.9 ～ 20	4 ～ 20	6 ～ 12	6 ～ 20	-	4 ～ 32	4 ～ 12	3 ～ 20	4 ～ 20	6 ～ 12	4 ～ 12	4 ～ 20	3 ～ 20	4 ～ 12	3 ～ 20	4 ～ 12
Number of flutes(sheet)	4	2	2	2	4	4	4	2	4	2	2	2	2	4	4 ～ 8	2	2	4	4	2	2	4	4	2	2	4	4 ～ 6	2	2	2	4	2	6	-	4	-	2	2	4	2	2	2	2	2	2
Overall Length (L)(mm)	50 ～ 120	50 ～ 125	40 ～ 100	38 ～ 100	40 ～ 100	40 ～ 100	50 ～ 175	50 ～ 100	40 ～ 100	45 ～ 75	45 ～ 140	45 ～ 100	40 ～ 125	40 ～ 125	60 ～ 140	40 ～ 85	45 ～ 80	45 ～ 105	60 ～ 125	45 ～ 50	45 ～ 60	45 ～ 80	38 ～ 60	40	45 ～ 130	40 ～ 125	84 ～ 123	38 ～ 104	40	38 ～ 150	50 ～ 100	68 ～ 86	50 ～ 100	55	40 ～ 130	45 ～ 80	40 ～ 110	40 ～ 105	50 ～ 90	40 ～ 65	40 ～ 105	35 ～ 110	45 ～ 85	40 ～ 130	45 ～ 95
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Aluminum[○] / Copper[○]	general steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC65[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Torsion Angle (θ)	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Side / Groove	Groove	Plane / Side / Groove	Plane / Side / Plunging (Z feed) / Countersinking	Groove / Plunging (Z feed)	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side	Plane / Side / Groove / Inclined Cuts / Countersinking	-	Side	Plane / Side / Groove	Side / Groove	-	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking
Coating	For High Hardness (Silicon Group)	DLC	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	-	Non-Coated	-	-	Non-Coated	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	-	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Blade tip shape	With Lead	Sharp Edge	With Lead	Sharp Edge	With Lead	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	C plane	-	Sharp Edge	-	With Lead	-	Sharp Edge	-	Sharp Edge	-	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	Square	Square	-	Square	Square	Square	Square	Square	Square	Square	Square	Square

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

78

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

114

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear