(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Straight Shank / End Mill Shank Drills (Carbide)

317 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

1
2
3
4
5
Next >>

TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

MISUMI

[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance

Volume Discount
Days to Ship: 16 Day(s) or more
Aqua Drill 3-Flute AQD3F

NACHI(FUJIKOSHI)

3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

Days to Ship: 11 Day(s) or more
BOTEK Gun Drill (Type with Cemented Carbide)

BOTEK

Days to Ship: 8 Day(s) or more
Standard Solid Drill

ATOM

A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.

Days to Ship: 12 Day(s) or more
Straight Shank Drill, 5 × D Type N 2464

GUHRING

[Features]
· Highly versatile carbide solid drill.
· Supports various workpiece materials such as aluminum or general steel.
· FIRE coating achieves longer life.

Days to Ship: 10 Day(s) or more
Aqua Drill EX with Flat Corner R AQDEXZ-R

NACHI(FUJIKOSHI)

[Features]
· Drill with excellent drilling performance for counterboring.
· Ideal for inclined surfaces and tap pilot hole drilling.
· Recommended for hole depth 2D (twice the diameter) or less.

Days to Ship: 11 Day(s) or more
Carbide Drill 2D Type_AD-2D

OSG

[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 2 Day(s) or more
Aqua Micro Drill AQMD

NACHI(FUJIKOSHI)

A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

Days to Ship: 16 Day(s) or more
MEGA Drill Aramid (for Aramid, External Oil Feed Type)

MAPAL

[Features]
· Ideal for drilling aramid material.
· Dedicated design (conical type) all but eliminating the generation of burrs.
· Adopts a straight shank.
[Applications]
· Work material: Aramid fiber.

Days to Ship: 35 Day(s)
Super Multi-Drill Internal Refueling, HGS-Model 5D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill, Regular

MISUMI

[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount
Days to Ship: Same day or more
Aqua Drill EX Flat AQDEXZ

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 10 Day(s) or more
Solid Carbide Drill for Cast Iron / Nonferrous SSN

OKAZAKI SEIKO

It is a drill with X thinning shaped tip, suitable for drilling cast iron and nonferrous metals.

Days to Ship: 12 Day(s) or more
Carbide Flat Drill 2D Type_ADF-2D

OSG

[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.

Days to Ship: 2 Day(s) or more
Aqua Drill EX Oil Hole 20D AQDEXOH20D

NACHI(FUJIKOSHI)

[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 20 times the drill diameter.

Days to Ship: 11 Day(s) or more
Flat Multi-Drill MDF Type External Lubrication 2D Type

SUMITOMO ELECTRIC HARDMETAL

[Features]
· As well as higher efficiency counterbore machining, this carbide solid drill can be used for various applications such as drilling inclined surfaces or curved surfaces.

Days to Ship: 16 Day(s) or more
Carbide Drill 4D Type_AD-4D

OSG

[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 12 Day(s) or more
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D

OSG

[Features]
· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 16 Day(s) or more
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

MISUMI

A small radius type of the high-hardness steel series

Volume Discount
Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 5D AQDEXOH5D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.

Days to Ship: 11 Day(s) or more
Aqua Drill FC AQDFC

NACHI(FUJIKOSHI)

A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Stub AQDEXS

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL

OSG

Small diameter carbide drill long type for stainless steel machining. Stainless steel processing provides stable durability.

Days to Ship: 16 Day(s) or more
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit

UNION TOOL

[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: Carbide

Days to Ship: 12 Day(s) or more
MVS, WSTAR Drill Bit (External Lubrication Type)

MITSUBISHI MATERIALS

General purpose carbide solid drill (external oil supply).
[Features]
· Wave blade type and groove shape having excellent chip disposal.
· The smoothing process reduces cutting resistance and provides excellent chip discharge performance.
[Applications]
· Drill-dedicated PVD grade shows excellent wear resistance with a wide range of work materials from general steel to carbon steel, alloy steel, stainless steel, and cast iron.

Days to Ship: 12 Day(s)
Super Multi-Drill External Refueling, GS-Model 4D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
Micro Drill Short Tip

ATOM

A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.

Days to Ship: 12 Day(s) or more
Beam Drill (Twist type) VN-DTD Type

DIJET

It is a tool with excellent abrasion resistance.

Days to Ship: 10 Day(s) or more
MQL Long Drill 15 x D with Oil Hole RT100T 6509

GUHRING

Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.

Days to Ship: 10 Day(s) or more
PCD Drill DRD-2

KYOWA SEIKO

The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Flat Regular AQDEXZR

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
· Flat drill for 4D boring depth with excellent drilling performance.
· A centering hole or guide hole is required.
[Applications]
· Countersinking on inclined surfaces and correction of eccentric bores.
· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.

Days to Ship: 15 Day(s) or more
MEGA Drill Reamer (Internal Oil Feed Type) 3D Type

MAPAL

[Features]
· H7 precision holes can be machined in one shot, with the 3 steps of "centering + drilling + reaming" integrated into 1 process.
· The characteristic chisel design and combination land demonstrate incredible centripetal force. (Drill Cutting Edge x 2, Reaming Edge x 4)
· Ideal for processing positioning holes or dowel pin holes.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, light alloy.

Days to Ship: 35 Day(s)
MEGA Stack Drill (CFRP/Titanium Series, Internal Oil Feed Type)

MAPAL

Days to Ship: 35 Day(s)
MEGA-Drill-Composite (SCD250) External Lubrication x 5D

MAPAL

Days to Ship: 12 Day(s)
Aqua Drill EX 3-Flute Hard AQDEX3FH

NACHI(FUJIKOSHI)

[Features]
· Capable of high-precision and high-efficiency machining of 50 to 68 HRC hardened steel.

Days to Ship: 12 Day(s) or more
Toglon Hard Long Drill 30D ALT Coating

IWATA TOOL

It has excellent roundness, cylindricity, and surface coarseness, and holes such as ejector pins can be drilled without pilot holes, leading to workload reduction and short delivery time.

Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

MISUMI

[Features]
·Ideal for high-precision small-diameter hole drilling
·The shank diameter is unified to 3 mm, enabling high-precision chucking
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining

Volume Discount
Days to Ship: 10 Day(s) or more
TiAlN Coated Carbide Drill, Stub

MISUMI

[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill, Straight Shank / Stub Model

MISUMI

[Features]
·Versatile carbide drill for a wide range of applications
·TiAlN coating enables high-speed cutting
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Long Drill, Straight Shank

MISUMI

Carbide long drill that achieves the high efficiency deep-hole drilling

Volume Discount
Days to Ship: 12 Day(s) or more
TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub

MISUMI

[Features]
·Weak helix and large core diameter improve tool rigidity
·Achieves outstanding strength by adopting straight cutting edge
·Cutting edge chipping is suppressed by corner radius processing, and cracks at the bottom of blind holes in workpieces are also suppressed
·Ideal for machining high hardness steel of HRC40 to 60
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount
Days to Ship: 16 Day(s) or more
DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model

MISUMI

[Features]
·Designed with helix angle of 38° near the tip and 20° near the shank
·The 20° section has large core diameter for improved tool durability
·120° tip angle and combined helix angle improve durability in aluminum processing

Volume Discount
Days to Ship: 16 Day(s) or more
Aqua Drill EX Regular AQDEXR

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Aqua Drill Hard AQDH

NACHI(FUJIKOSHI)

Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.

Days to Ship: 12 Day(s) or more
DLC Micro Drills DLCMD

NACHI(FUJIKOSHI)

An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.

Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	35 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	15 Day(s) or more

Days to Ship:	35 Day(s)

Days to Ship:	35 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type


Brand	MISUMI	NACHI(FUJIKOSHI)	BOTEK	ATOM	GUHRING	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	MAPAL	SUMITOMO ELECTRIC HARDMETAL	MISUMI	NACHI(FUJIKOSHI)	OKAZAKI SEIKO	OSG	NACHI(FUJIKOSHI)	SUMITOMO ELECTRIC HARDMETAL	OSG	OSG	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	UNION TOOL	MITSUBISHI MATERIALS	SUMITOMO ELECTRIC HARDMETAL	ATOM	DIJET	GUHRING	KYOWA SEIKO	NACHI(FUJIKOSHI)	MAPAL	MAPAL	MAPAL	NACHI(FUJIKOSHI)	IWATA TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)
Product Series	TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model	Aqua Drill 3-Flute AQD3F	BOTEK Gun Drill (Type with Cemented Carbide)	Standard Solid Drill	Straight Shank Drill, 5 × D Type N 2464	Aqua Drill EX with Flat Corner R AQDEXZ-R	Carbide Drill 2D Type_AD-2D	Aqua Micro Drill AQMD	MEGA Drill Aramid (for Aramid, External Oil Feed Type)	Super Multi-Drill Internal Refueling, HGS-Model 5D-Type	TiAlN Coated Carbide Drill, Regular	Aqua Drill EX Flat AQDEXZ	Solid Carbide Drill for Cast Iron / Nonferrous SSN	Carbide Flat Drill 2D Type_ADF-2D	Aqua Drill EX Oil Hole 20D AQDEXOH20D	Flat Multi-Drill MDF Type External Lubrication 2D Type	Carbide Drill 4D Type_AD-4D	Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D	TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular	Aqua Drill EX Oil Hole 5D AQDEXOH5D	Aqua Drill FC AQDFC	Aqua Drill EX Stub AQDEXS	Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL	C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit	MVS, WSTAR Drill Bit (External Lubrication Type)	Super Multi-Drill External Refueling, GS-Model 4D-Type	Micro Drill Short Tip	Beam Drill (Twist type) VN-DTD Type	MQL Long Drill 15 x D with Oil Hole RT100T 6509	PCD Drill DRD-2	Aqua Drill EX Flat Regular AQDEXZR	MEGA Drill Reamer (Internal Oil Feed Type) 3D Type	MEGA Stack Drill (CFRP/Titanium Series, Internal Oil Feed Type)	MEGA-Drill-Composite (SCD250) External Lubrication x 5D	Aqua Drill EX 3-Flute Hard AQDEX3FH	Toglon Hard Long Drill 30D ALT Coating	TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model	TiAlN Coated Carbide Drill, Stub	TiAlN Coated Carbide Drill, Straight Shank / Stub Model	TiAlN Coated Carbide Long Drill, Straight Shank	TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub	DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model	Aqua Drill EX Regular AQDEXR	Aqua Drill Hard AQDH	DLC Micro Drills DLCMD
Days to Ship	16 Day(s) or more	11 Day(s) or more	8 Day(s) or more	12 Day(s) or more	10 Day(s) or more	11 Day(s) or more	2 Day(s) or more	16 Day(s) or more	35 Day(s)	16 Day(s) or more	Same day or more	10 Day(s) or more	12 Day(s) or more	2 Day(s) or more	11 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s)	16 Day(s) or more	12 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	15 Day(s) or more	35 Day(s)	35 Day(s)	12 Day(s)	12 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more
Hole diameter (drill diameter) D(mm)	3 ～ 13	3 ～ 16	3 ～ 20	0.3 ～ Over 36.5, and 38.0 or less	1 ～ 12	3 ～ 12	2 ～ 12	0.2 ～ 1.99	3 ～ 10	7	0.3 ～ 13	0.5 ～ 20	0.5 ～ 13	2 ～ 20	1 ～ 10	-	2 ～ 20	2 ～ 20	0.8 ～ 3	1 ～ 16	2 ～ 12	2 ～ 16	0.44 ～ 3	0.11 ～ 3	13	1 ～ 10	0.1 ～ 3	1 ～ 12	3 ～ 14	0.3 ～ 3	3 ～ 20	6 ～ 20	3 ～ -	3 ～ -	3 ～ 16	-	0.38 ～ 2.7	0.3 ～ 6	1 ～ 8	3 ～ 10	3 ～ 13	4.2 ～ 6.5	2 ～ 16	2 ～ 12	0.5 ～ 1.9
Overall Length L(mm)	46 ～ 137	48 ～ 144	150 ～ 500	30 ～ 100	34 ～ 151	50 ～ 90	62 ～ 102	38 ～ 47	40 ～ 89	109	38 ～ 124	47 ～ 145	45 ～ 118	50 ～ 140	71 ～ 280	-	66 ～ 153	66 ～ 165	47 ～ 67	56 ～ 194	47 ～ 130	45 ～ 112	38 ～ 66	38	104.2	49 ～ 105	38	75 ～ 250	95 ～ 297	38	60 ～ 195	79 ～ 131	66 ～ 118	66 ～ 118	45 ～ 112	-	38	38 ～ 66	26 ～ 79	100 ～ 200	62 ～ 107	80 ～ 110	49 ～ 160	44 ～ 108	44 ～ 47
Groove Length L(mm)	16 ～ 78	16 ～ 80	60 ～ 340	4 ～ 50	12 ～ 101	14 ～ 54	14 ～ 55	2.5 ～ 15	12 ～ 48	56	3 ～ 77	1.65 ～ 90	6 ～ 60	10 ～ 88	23 ～ 230	16 ～ 43.2	20 ～ 101	12 ～ 100	6 ～ 27	8 ～ 128	15 ～ 73	8 ～ 55	6 ～ 36	1.2 ～ 12	53.4	12 ～ 60	0.6 ～ 12	20 ～ 120	55 ～ 248	4 ～ 10	19 ～ 126	34 ～ 79	28 ～ 71	28 ～ 71	13 ～ 55	-	6 ～ 12	2 ～ 28	6 ～ 37	60 ～ 140	20 ～ 60	36 ～ 53	15 ～ 96	12 ～ 51	6 ～ 15
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	-	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Titanium[○]	general steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	Stainless Steel[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	Aluminum[○] / Graphite[◎]	-	Aluminum[◎] / Copper[◎] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-	-	-	high hardness steel[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Machinable Ceramics[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Quenched and tempered steel[○] / high hardness steel[◎]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	high hardness steel[◎]	Aluminum[◎] / Copper[○]
Shank Type	straight shank	End Mill Shank / straight shank	-	straight shank	straight shank	straight shank	End Mill Shank	End Mill Shank	-	straight shank	End Mill Shank	End Mill Shank / straight shank	straight shank	End Mill Shank / straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank	-	End Mill Shank / straight shank	End Mill Shank	straight shank	-	End Mill Shank	-	-	-	-	straight shank	End Mill Shank	End Mill Shank	End Mill Shank	straight shank	straight shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	Carbide	Carbide	-	Carbide	PCD	Carbide	-	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
With/without Oil Hole	NA	NA	Available	NA	NA	NA	NA	NA	-	Available	NA	NA	NA	NA	Available	NA	NA	Available	NA	Available	NA	-	NA	NA	-	NA	NA	NA	Available	NA	-	-	-	-	NA	NA	NA	NA	NA	Available / NA	NA	NA	NA	NA	NA
Coating Y/N	Available	Available	NA	NA	Available	Available	Available	Available	-	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	NA	Available	NA	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiAlN	Other	-	Non-Coated	Other	For General Steels (AlCrN, etc.)	Other	Other	-	For High Hardness (Silicon Group)	TiAlN	Other	Non-Coated	Other	For General Steels (AlCrN, etc.)	-	Other	Other	-	Other	Other	Other	Other	Other	Other	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	-	Other	Other	Non-Coated	Other	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	-	DLC	Other	Other	DLC

1
2
3
4
5
Next >>

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)
- 0～0.995
  - 0
  - 0.01
  - 0.015
  - 0.02
  - 0.025
  - 0.03
  - 0.035
  - 0.04
  - 0.045
  - 0.05
  - 0.055
  - 0.06
  - 0.065
  - 0.07
  - 0.075
  - 0.08
  - 0.085
  - 0.09
  - 0.095
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.13
  - 0.135
  - 0.14
  - 0.145
  - 0.15
  - 0.155
  - 0.16
  - 0.165
  - 0.17
  - 0.175
  - 0.18
  - 0.185
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.395
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.455
  - 0.46
  - 0.465
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.565
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.635
  - 0.64
  - 0.645
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.685
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.715
  - 0.72
  - 0.725
  - 0.73
  - 0.735
  - 0.74
  - 0.745
  - 0.75
  - 0.755
  - 0.76
  - 0.765
  - 0.77
  - 0.775
  - 0.78
  - 0.785
  - 0.79
  - 0.795
  - 0.8
  - 0.805
  - 0.81
  - 0.815
  - 0.82
  - 0.825
  - 0.83
  - 0.835
  - 0.84
  - 0.845
  - 0.85
  - 0.855
  - 0.86
  - 0.865
  - 0.87
  - 0.875
  - 0.88
  - 0.885
  - 0.89
  - 0.895
  - 0.9
  - 0.905
  - 0.91
  - 0.915
  - 0.92
  - 0.925
  - 0.93
  - 0.935
  - 0.94
  - 0.945
  - 0.95
  - 0.955
  - 0.96
  - 0.965
  - 0.97
  - 0.975
  - 0.98
  - 0.985
  - 0.99
  - 0.995
- 1～1.995
  - 1
  - 1.005
  - 1.01
  - 1.015
  - 1.02
  - 1.025
  - 1.03
  - 1.035
  - 1.04
  - 1.045
  - 1.05
  - 1.055
  - 1.06
  - 1.065
  - 1.07
  - 1.075
  - 1.08
  - 1.085
  - 1.09
  - 1.095
  - 1.1
  - 1.105
  - 1.11
  - 1.115
  - 1.12
  - 1.125
  - 1.13
  - 1.135
  - 1.14
  - 1.145
  - 1.15
  - 1.155
  - 1.16
  - 1.165
  - 1.17
  - 1.175
  - 1.18
  - 1.185
  - 1.19
  - 1.195
  - 1.2
  - 1.205
  - 1.21
  - 1.215
  - 1.22
  - 1.225
  - 1.23
  - 1.235
  - 1.24
  - 1.245
  - 1.25
  - 1.255
  - 1.26
  - 1.265
  - 1.27
  - 1.275
  - 1.28
  - 1.285
  - 1.29
  - 1.295
  - 1.3
  - 1.305
  - 1.31
  - 1.315
  - 1.32
  - 1.325
  - 1.33
  - 1.335
  - 1.34
  - 1.345
  - 1.35
  - 1.355
  - 1.36
  - 1.365
  - 1.37
  - 1.375
  - 1.38
  - 1.385
  - 1.39
  - 1.395
  - 1.4
  - 1.405
  - 1.41
  - 1.415
  - 1.42
  - 1.425
  - 1.43
  - 1.435
  - 1.44
  - 1.445
  - 1.45
  - 1.455
  - 1.46
  - 1.465
  - 1.47
  - 1.475
  - 1.48
  - 1.485
  - 1.49
  - 1.495
  - 1.5
  - 1.505
  - 1.51
  - 1.515
  - 1.52
  - 1.525
  - 1.53
  - 1.535
  - 1.54
  - 1.545
  - 1.55
  - 1.555
  - 1.56
  - 1.565
  - 1.57
  - 1.575
  - 1.58
  - 1.585
  - 1.59
  - 1.595
  - 1.6
  - 1.605
  - 1.61
  - 1.615
  - 1.62
  - 1.625
  - 1.63
  - 1.635
  - 1.64
  - 1.645
  - 1.65
  - 1.655
  - 1.66
  - 1.665
  - 1.67
  - 1.675
  - 1.68
  - 1.685
  - 1.69
  - 1.695
  - 1.7
  - 1.705
  - 1.71
  - 1.715
  - 1.72
  - 1.725
  - 1.73
  - 1.735
  - 1.74
  - 1.745
  - 1.75
  - 1.755
  - 1.76
  - 1.765
  - 1.77
  - 1.775
  - 1.78
  - 1.785
  - 1.79
  - 1.795
  - 1.8
  - 1.805
  - 1.81
  - 1.815
  - 1.82
  - 1.825
  - 1.83
  - 1.835
  - 1.84
  - 1.845
  - 1.85
  - 1.855
  - 1.86
  - 1.865
  - 1.87
  - 1.875
  - 1.88
  - 1.885
  - 1.89
  - 1.895
  - 1.9
  - 1.905
  - 1.91
  - 1.915
  - 1.92
  - 1.925
  - 1.93
  - 1.935
  - 1.94
  - 1.945
  - 1.95
  - 1.955
  - 1.96
  - 1.965
  - 1.97
  - 1.975
  - 1.98
  - 1.984
  - 1.985
  - 1.99
  - 1.995
- 2～2.99
  - 2
  - 2.01
  - 2.015
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.115
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.215
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.315
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.383
  - 2.39
  - 2.4
  - 2.41
  - 2.415
  - 2.42
  - 2.43
  - 2.439
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.489
  - 2.49
  - 2.5
  - 2.51
  - 2.515
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.578
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.615
  - 2.62
  - 2.63
  - 2.64
  - 2.642
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.705
  - 2.71
  - 2.715
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.779
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.815
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.915
  - 2.92
  - 2.93
  - 2.94
  - 2.947
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.048
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.264
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.455
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.571
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.658
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.734
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.039
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.176
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.217
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.366
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.623
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.763
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.837
  - 4.84
  - 4.85
  - 4.852
  - 4.86
  - 4.864
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.106
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.159
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.49999999999999
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.558
  - 5.56
  - 5.565
  - 5.57
  - 5.58
  - 5.59
  - 5.59999999999999
  - 5.6
  - 5.61
  - 5.616
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.69999999999999
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.79999999999999
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.89999999999999
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.954
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.95
  - 6
  - 6.01
  - 6.02
  - 6.03
  - 6.04
  - 6.05
  - 6.06
  - 6.07
  - 6.08
  - 6.09
  - 6.09999999999999
  - 6.1
  - 6.13
  - 6.15
  - 6.19999999999999
  - 6.2
  - 6.23
  - 6.25
  - 6.29999999999999
  - 6.3
  - 6.33
  - 6.35
  - 6.35 (¼")
  - 6.365
  - 6.375
  - 6.39999999999999
  - 6.4
  - 6.43
  - 6.45
  - 6.49999999999999
  - 6.5
  - 6.528
  - 6.53
  - 6.55
  - 6.59999999999999
  - 6.6
  - 6.63
  - 6.65
  - 6.69999999999999
  - 6.7
  - 6.73
  - 6.746
  - 6.75
  - 6.8
  - 6.83
  - 6.85
  - 6.89999999999999
  - 6.9
  - 6.93
  - 6.95
- 7～7.98
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.09999999999999
  - 7.1
  - 7.13
  - 7.14
  - 7.145
  - 7.19999999999999
  - 7.2
  - 7.23
  - 7.25
  - 7.29999999999999
  - 7.3
  - 7.33
  - 7.35
  - 7.36
  - 7.38
  - 7.39999999999999
  - 7.4
  - 7.43
  - 7.45
  - 7.49999999999999
  - 7.5
  - 7.52
  - 7.53
  - 7.54
  - 7.541
  - 7.55
  - 7.59999999999999
  - 7.6
  - 7.63
  - 7.69999999999999
  - 7.7
  - 7.73
  - 7.75
  - 7.79999999999999
  - 7.8
  - 7.83
  - 7.85
  - 7.89999999999999
  - 7.9
  - 7.93
  - 7.938
  - 7.94
  - 7.95
  - 7.953
  - 7.98
- 8～8.93
  - 8
  - 8.01
  - 8.02
  - 8.03
  - 8.04
  - 8.05
  - 8.06
  - 8.07
  - 8.08
  - 8.09
  - 8.09999999999999
  - 8.1
  - 8.13
  - 8.19999999999999
  - 8.2
  - 8.23
  - 8.25
  - 8.29999999999998
  - 8.3
  - 8.33
  - 8.334
  - 8.39999999999998
  - 8.4
  - 8.43
  - 8.433
  - 8.5
  - 8.50000000000001
  - 8.53
  - 8.58
  - 8.59999999999998
  - 8.6
  - 8.63
  - 8.69999999999998
  - 8.7
  - 8.73
  - 8.733
  - 8.75
  - 8.79999999999998
  - 8.8
  - 8.80000000000001
  - 8.83
  - 8.85
  - 8.89999999999998
  - 8.9
  - 8.90000000000001
  - 8.93
- 9～9.97
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.09999999999998
  - 9.1
  - 9.129
  - 9.13
  - 9.19999999999998
  - 9.2
  - 9.20000000000001
  - 9.21
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.29999999999998
  - 9.3
  - 9.30000000000001
  - 9.33
  - 9.347
  - 9.36
  - 9.38
  - 9.39999999999998
  - 9.4
  - 9.40000000000001
  - 9.43
  - 9.49999999999998
  - 9.5
  - 9.50000000000001
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.59999999999998
  - 9.6
  - 9.60000000000001
  - 9.63
  - 9.69999999999998
  - 9.7
  - 9.70000000000001
  - 9.73
  - 9.75
  - 9.79999999999998
  - 9.8
  - 9.80000000000001
  - 9.83
  - 9.85
  - 9.89999999999998
  - 9.9
  - 9.90000000000001
  - 9.92
  - 9.921
  - 9.93
  - 9.95
  - 9.97
- 10～10.93
  - 10
  - 10.01
  - 10.02
  - 10.03
  - 10.04
  - 10.05
  - 10.06
  - 10.07
  - 10.08
  - 10.09
  - 10.1
  - 10.13
  - 10.2
  - 10.23
  - 10.25
  - 10.3
  - 10.32
  - 10.33
  - 10.4
  - 10.43
  - 10.5
  - 10.53
  - 10.6
  - 10.63
  - 10.7
  - 10.716
  - 10.72
  - 10.73
  - 10.75
  - 10.8
  - 10.83
  - 10.85
  - 10.9
  - 10.93
- 11～11.95
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.113
  - 11.13
  - 11.133
  - 11.2
  - 11.22
  - 11.23
  - 11.24
  - 11.3
  - 11.33
  - 11.36
  - 11.38
  - 11.4
  - 11.43
  - 11.5
  - 11.509
  - 11.51
  - 11.53
  - 11.56
  - 11.6
  - 11.63
  - 11.7
  - 11.73
  - 11.8
  - 11.83
  - 11.85
  - 11.9
  - 11.908
  - 11.91
  - 11.93
  - 11.95
- 12～12.96
  - 12
  - 12.0 or more, less than 12.5
  - 12.01
  - 12.02
  - 12.03
  - 12.04
  - 12.05
  - 12.06
  - 12.07
  - 12.08
  - 12.09
  - 12.1
  - 12.2
  - 12.3
  - 12.304
  - 12.4
  - 12.5
  - 12.5 or more, less than 13.0
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.96
- 13～13.9
  - 13
  - 13.096
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.43
  - 13.49
  - 13.5
  - 13.55
  - 13.6
  - 13.7
  - 13.8
  - 13.89
  - 13.891
  - 13.9
- 14～14.96
  - 14
  - 14.1
  - 14.2
  - 14.288
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.684
  - 14.7
  - 14.8
  - 14.9
  - 14.96
- 15～15.9
  - 15
  - 15.083
  - 15.1
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.479
  - 15.5
  - 15.55
  - 15.6
  - 15.7
  - 15.8
  - 15.87
  - 15.875
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.271
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.67
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.463
  - 17.5
  - 17.55
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.258
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.654
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.55
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5/24.7
  - 24
  - 24.5
  - 24.5/24.7
- 25～25.5
  - 25
  - 25.5
- 26～26.5/26.7
  - 26
  - 26.5
  - 26.5/26.7
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 44
Drawing

Clear

Overall Length L(mm)
11

13

16

20

21

22

23

24

25

26

28

30

32

34

35

36

38

40

42

42.5

43

44

45

46

47

48

48.5

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

100

101

102

103

104

104.2

105

106

107

108

109

110

111

112

113

114

115

116

117

118

118.1

119

120

121

122

123

124

125

126

127

128

130

131

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

165

166

167

168

169

170

171

172

174

175

176

177

178

179

180

182

183

184

185

186

188

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

208

209

210

211

212

215

216

217

218

220

221

222

223

224

225

227

228

229

230

232

233

234

235

237

238

240

241

242

244

245

246

247

248

249

250

255

257

258

260

263

265

267

268

269

270

271

272

274

275

276

278

280

281

285

289.7

290

294

295

297

298

300

302

303

305

310

314

315

320

321

322

323

330

339

340

342

350

359

363

367

370

371

383

386

390

400

420

430

450

480

485

500

510

560

600

740

910

1080
Drawing

Clear

Groove Length L(mm)
- 0～0.9
  - 0
  - 0.015
  - 0.025
  - 0.04
  - 0.05
  - 0.06
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.18
  - 0.2
  - 0.22
  - 0.24
  - 0.25
  - 0.3
  - 0.33
  - 0.4
  - 0.44
  - 0.48
  - 0.5
  - 0.55
  - 0.6
  - 0.7
  - 0.8
  - 0.88
  - 0.9
- 1～1.98
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.65
  - 1.7
  - 1.8
  - 1.9
  - 1.98
- 2～2.97
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.31
  - 2.4
  - 2.5
  - 2.6
  - 2.64
  - 2.7
  - 2.8
  - 2.9
  - 2.97
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.8
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.8
- 7～7.8
  - 7
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.8
  - 8
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.8
- 9～9.8
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.8
- 10～10.8
  - 10
  - 10..1
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.8
  - 12
  - 12.2
  - 12.3
  - 12.5
  - 12.6
  - 12.8
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.8
- 14～14.9
  - 14
  - 14.3
  - 14.4
  - 14.5
  - 14.8
  - 14.9
- 15～15.8
  - 15
  - 15.3
  - 15.6
  - 15.8
- 16～16.8
  - 16
  - 16.1
  - 16.2
  - 16.5
  - 16.7
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.6
  - 17.8
- 18～18.9
  - 18
  - 18.5
  - 18.6
  - 18.8
  - 18.9
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.7
  - 19.8
- 20～20.7
  - 20
  - 20.3
  - 20.4
  - 20.7
- 21～21.8
  - 21
  - 21.2
  - 21.4
  - 21.6
  - 21.8
- 22～22.8
  - 22
  - 22.1
  - 22.2
  - 22.5
  - 22.8
- 23～23.9
  - 23
  - 23.3
  - 23.4
  - 23.9
- 24～24.8
  - 24
  - 24.3
  - 24.5
  - 24.6
  - 24.8
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.7
  - 25.8
- 26～26.6
  - 26
  - 26.1
  - 26.3
  - 26.4
  - 26.6
- 27～27.8
  - 27
  - 27.6
  - 27.8
- 28～28.8
  - 28
  - 28.1
  - 28.2
  - 28.5
  - 28.8
- 29～29.4
  - 29
  - 29.3
  - 29.4
- 30～30.8
  - 30
  - 30.6
  - 30.8
- 31～31.7
  - 31
  - 31.2
  - 31.5
  - 31.7
- 32～32.8
  - 32
  - 32.3
  - 32.4
  - 32.8
- 33～33.8
  - 33
  - 33.6
  - 33.8
- 34～34.8
  - 34
  - 34.1
  - 34.5
  - 34.8
- 35～35.5
  - 35
  - 35.3
  - 35.5
- 36～36.8
  - 36
  - 36.5
  - 36.8
- 37～37.5
  - 37
  - 37.5
- 38～38.3
  - 38
  - 38.3
- 39～39.8
  - 39
  - 39.8
- 40～40.5
  - 40
  - 40.5
- 41～41.3
  - 41
  - 41.3
- 42～42.8
  - 42
  - 42.8
- 43～43.5
  - 43
  - 43.2
  - 43.5
- 44～44.3
  - 44
  - 44.3
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53～53.4
  - 53
  - 53.4
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 130
- 131
- 132
- 133
- 135
- 136
- 137
- 138
- 140
- 143
- 144
- 145
- 146
- 148
- 149
- 150
- 152
- 153
- 154
- 155
- 156
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 167
- 168
- 169
- 170
- 171
- 173
- 175
- 176
- 177
- 180
- 181
- 182
- 183
- 184
- 185
- 188
- 189
- 190
- 195
- 196
- 197
- 198
- 200
- 205
- 207
- 208
- 210
- 212
- 214
- 215
- 216
- 218
- 219
- 220
- 223
- 224
- 227
- 230
- 231
- 232
- 234
- 240
- 242
- 248
- 250
- 252
- 253
- 258
- 260
- 263
- 264
- 265
- 270
- 272
- 274
- 277
- 280
- 282
- 290
- 292
- 295
- 300
- 302
- 310
- 315
- 318
- 322
- 323
- 327
- 330
- 337
- 340
- 343
- 350
- 360
- 372
- 385
- 400
- 402
- 432
- 440
- 460
- 512
- 550
- 692
- 860
- 1030
Drawing

Clear

work material
Details

Clear

Shank Type
Images

Clear

Tool Material Type
Details

Clear

With/without Oil Hole
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
Details

Clear

Narrow search by specifying Manufacturer

- MISUMI (32)
- Economy series (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB