(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
This translation is a Google translation Terjemahan ini adalah terjemahan Google
Days to Ship |
|
---|
YUKIWA SEIKO
Since the recommended torque has been set, lock nuts will not be overtightened.
Days to Ship: | 16 Day(s) or more |
---|
Fuso "Cool Dumbo" (bellows tube air nozzle) round blow
FUSOSEIKI
[Features]
·A one-touch magnet nozzle for air.
·You can freely change the spray direction.
·It is made of a pressure-resistant bellows tube, so the jet does not fluctuate easily.
[Applications]
·Powerful duster, cooling, drying, and draining. (Please use MAGIC CUT e-mist for spraying cutting fluid.)
·For removing chips from workpieces, blowing away small press items, removing dust, etc.
Days to Ship: | 1 Day(s) or more |
---|
Replacement Nozzle for Air Jet
TRUSCO NAKAYAMA
[Features]
· Has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance.
Days to Ship: | Same day or more |
---|
"Coolant Liner" (2-Piece Set)【2 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
Days to Ship: | Same day or more |
---|
"Coolant Liner" (Flat Nozzle)【1-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
Days to Ship: | 1 Day(s) |
---|
"Coolant Liner" (Y-Type Fitting)【1-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
Days to Ship: | 1 Day(s) |
---|
"Coolant Liner" (1/4 Socket/Female Thread Rc1/8 Dual Type)【1-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
Days to Ship: | 1 Day(s) |
---|
NOGA JAPAN
[Features]
An optional part for Cobra 2000.
A nylon hose 4 mm in diameter.
·Compatible main body: Cobra
・ Shaft diameter: 4 mm
Trusco Code: 837-6303
Days to Ship: | 10 Day(s) or more |
---|
NIIGATA SEIKI (SK)
A presetter ideal for scribing work with milling machines.
[Features]
· High precision scribing work can be performed easily by slightly tightening the spindle milling chuck of the milling machine.
· 60° angle scribing needle equipped as standard (80°tip angle replacement needle available).
· Tip: With carbide tip.
· Shank part: φ32 (diam. 32 mm) for K2-32, φ20 (diam. 20 mm) for K2-20.
[Applications]
· Can be used as a scribing tool for milling.
Days to Ship: | 16 Day(s) or more |
---|
SANDVIK
[Features]
· Collet chuck holder.
· Easy to handle.
[Applications]
· For chucking drills and end mills.
Days to Ship: | 12 Day(s) |
---|
BBT Shank, New High Power Milling Chuck for Large Diameter End Mills, BBT50
BIG DAISHOWA SEIKI
[Features]·The double nut mechanism supports the flange of the chuck and increases bending rigidity, making it ideal for machining large-diameter long end mills. ·Achieves runout accuracy that cannot be gained from a side lock holder.
Days to Ship: | 12 Day(s) or more |
---|
HSK Shank New High-Power Milling Chuck S Type (A Type)
BIG DAISHOWA SEIKI
[Features]
· BIG's original slit mechanism provides high-power and high-precision support for everything from heavy cutting to fine cutting for end mill processing.
Days to Ship: | 10 Day(s) or more |
---|
Point Master Pro PMPC Series BBT Shank Type
BIG DAISHOWA SEIKI
[Features]
· Detects reference point instantly even on non-conductive workpieces or machines.
· Notifies user of touch position with LED and an electronic beep.
Days to Ship: | 12 Day(s) or more |
---|
Days to Ship: | Same day or more |
---|
Drill Chuck (With Integrated Shank)
SHOWA TOOL
Compact integrated shank. Drill chuck that is economical and easy to use.
[Features]
· Compact type with a shorter L dimension than a conventional drill chuck.
· Integrated shank that does not need to be attached or removed.
· The wrench included can be used for tightening during high-torque machining.
Days to Ship: | 14 Day(s) or more |
---|
Reference Position Detection Bar Spring for Replacement of Magic Center
KASAHARA
There are hooks on both ends of the spring, and the spring itself has two hooks.
Days to Ship: | 12 Day(s) or more |
---|
Tool Setter - Conductive Type / Magnetic Cable
NISSIN SANGYO
An ultra-precision tool setter with a detection accuracy of 1 µm.
·Minimum measuring tool diameter: ⌀1 mm
·LED: Red
·Repeatability: ±0.001 mm
·Weight: TOS50: 540 g, TOS100: 780 g
·Accessories: Lithium battery CR2032, 1 pc.
Days to Ship: | 17 Day(s) or more |
---|
Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces)
NISSIN SANGYO
An ultra-precise tool setter with a detection accuracy of 1 μm.
[Features]
· An ultra-precise tool setter with a detection accuracy of 1 μm.
· Uses scratch-resistant ceramic for the cutting edge detection part.
· Ideal for detecting the position of the cutting edges of small diameter drills and end mills.
· Adopts an internal contact system that can be used for non-conductive workpieces and machining centers with ceramic spindles.
· Magnet on base plate.
· Can be used with both vertical and horizontal types.
Days to Ship: | 16 Day(s) or more |
---|
NIIGATA SEIKI (SK)
A presetter used as a high precision positioning detector for milling cutters and machining centers.
[Features]
· Finds the 0 point rapidly with light sensor. (Conductivity)
[Applications]
· For setting the reference position in the Z direction.
· Used for setting the zero point reference for standard to precision tolerance on general purpose and NC milling machines, machining centers, etc.
Days to Ship: | 12 Day(s) or more |
---|
NIIGATA SEIKI (SK)
Presetter optimal for high-precision X/Y-axis centering bar.
[Applications]
· It can detect the reference position within 2 μm.
· Ideal for determining accurate reference points for general use, NC milling cutter and MC origin positions, etc.
· Lapping finish is applied to working surface, which is the foundation of accuracy.
· Enables positioning by simply placing the probe on the end face of the workpiece.
· Suitable rotation speed: 450 to 600 rpm; over-increasing the rotation speed can cause damage.
[Applications]
· Used as a high-precision X/Y-axis centering bar.
Days to Ship: | 12 Day(s) or more |
---|
Days to Ship: | Quote |
---|
NEW STRONG
[Features]
Divider that allows you to easily change angle by simply operating lever
Days to Ship: | 16 Day(s) or more |
---|
NEW STRONG
[Features]
· The tip is fully heat treated and can withstand long-term use.
· Since a spring is built into the grip, there is no effort wasted during work.
Days to Ship: | 16 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
[Features]
CE Type cartridge unit with a minimum machining diameter of 30 to 70.
Days to Ship: | 16 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
[Features]
CP Type/CE Type cartridge unit with a minimum machining diameter of 30 to 70.
Days to Ship: | 16 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
[Features]
N38 Type cartridge unit with a minimum machining diameter of 24 and 38.
Days to Ship: | 10 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
[Features]
SP/CE Type cartridge unit with a minimum machining diameter of 30 to 60.
Days to Ship: | 12 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
[Features]
A micro unit with a minimum machining diameter of 36 to 73 mm and available in right and left hand.
Days to Ship: | 16 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
SEC series micro unit.
There are 5 types depending on the minimum machining diameter.
Days to Ship: | 12 Day(s) or more |
---|
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
· Exerts its strength when the arbor is not quite long enough during deep engraving for molds
Days to Ship: | 12 Day(s) or more |
---|
FMP Plunger Conversion Adapter
MANYO TOOLS
[Features]
·For high feed.
Cutter conversion arbor for reciprocating thrusting.
·It is effective when the length of the arbor is a little short in the processing of deep cutting of molds.
[Detail Type]
·FMP plunge conversion adapter
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
· Dedicated tightening bolts support various thicknesses of metal saws.
· Dedicated thin bolts decrease interference with the tip to increase machining efficiency.
Days to Ship: | 12 Day(s) or more |
---|
ST-SCA Straight Shank Side Cutter Arbor
MANYO TOOLS
Please use it with a milling chuck.
Supports various workpieces with a wide variety of types.
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
·Compatible with MMC millmax milling chuck.
·Minimum order quantity: 1 pc.
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
·Compatible with MMC millmax milling chuck.
·Minimum order quantity: 1 pc.
·Outer diameter (mm): 20/32/42
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
·Compatible with MMC millmax milling chuck.
[Product Type]
·Compatible chuck: MMC20
·Compatible chuck: MMC25
·Compatible chuck: MMC32
·Compatible chuck: MMC42
Days to Ship: | 12 Day(s) or more |
---|
Back-up Screw with Coolant Seal Pad
MANYO TOOLS
This is a coolant type adjustment thread part.
Comes with a coolant seal pad.
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
·Coolant type adjustment thread parts
·Type (details): backup screw
·H (mm): 25
Days to Ship: | 18 Day(s) or more |
---|
Backup Screw for High Pressure Applications
MANYO TOOLS
[Features]
·Coolant type adjustment thread parts
·Type (details): high pressure backup screw
·H (mm): 10
Days to Ship: | 18 Day(s) or more |
---|
MRC Adjustment Screw with Coolant Seal
MANYO TOOLS
[Features]
·Compatible with MRC collet chuck holder
·Minimum order quantity: 1 pc.
[Detail Type]
Screw
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
·Compatible with MRC collet chuck holder
·Minimum order quantity: 1 pc.
[Detail Type]
Wrench
Days to Ship: | 18 Day(s) or more |
---|
MANYO TOOLS
[Features]
·Compatible with MRC collet chuck holder.
·Type (details): Small diameter collet
·Minimum order quantity: 1 pc.
Days to Ship: | 12 Day(s) or more |
---|
MANYO TOOLS
[Features]
· Collet inner diameter has a square hole for resistance to tap slippage.
· Dedicated collet is ideal for high accuracy tapping.
Days to Ship: | 12 Day(s) or more |
---|
Wrench for Small-Diameter Collet Chuck
MANYO TOOLS
[Features]
·Compatible with MRC collet chuck holder.
·Tap that has a square hole in the inner diameter of the collet and is resistant to tap slippage.
Dedicated collet. Suitable for high-precision tapping.
[Minimum Order Quantity]
·E8M: 2 pcs.
·E8MS, E11M, E11MS: 1 pc.
Days to Ship: | 9 Day(s) or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Spindle types |
HSK type |
Tool Type |
Retainable blade diameter(mm) |
Product Category |
Applicable Manufacturing Machinery (main unit) |
Chuck Type |
Holder Length L(mm) |
Maximum Allowable Rotational Speed(min-1) |
Coolant System |
Nozzle Type |
Brand | YUKIWA SEIKO | FUSOSEIKI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | NOGA JAPAN | NIIGATA SEIKI (SK) | SANDVIK | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | SHOWA TOOL | SHOWA TOOL | KASAHARA | NISSIN SANGYO | NISSIN SANGYO | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NEW STRONG | NEW STRONG | NEW STRONG | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | "Coolant Liner" (1/4 Socket/Female Thread Rc1/8 Dual Type)【1-10 Pieces Per Package】 | BBT Shank, New High Power Milling Chuck for Large Diameter End Mills, BBT50 | Reference Position Detection Bar Spring for Replacement of Magic Center | Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces) | |||||||||||||||||||||||||||||||||||||||||
Days to Ship | 16 Day(s) or more | 1 Day(s) or more | Same day or more | Same day or more | 1 Day(s) | 1 Day(s) | 1 Day(s) | 10 Day(s) or more | 16 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | Same day or more | 14 Day(s) or more | 12 Day(s) or more | 17 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | Quote | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 12 Day(s) or more | 18 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 9 Day(s) or more |
Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
Spindle types | - | - | - | - | - | - | - | - | - | - | BT50 | HSK-A | BT40 | - | BT40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
HSK type | - | - | - | - | - | - | - | - | - | - | - | 63 ~ 100 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Type | - | - | - | - | - | - | - | - | - | - | end mill | end mill | - | drill / Reamer | drill | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5~8 ~ 1 to 13 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Product Category | Attachments/Accessories | Heating and Cooling Equipment | Heating and Cooling Equipment | Heating and Cooling Equipment | Heating and Cooling Equipment | Heating and Cooling Equipment | Heating and Cooling Equipment | Heating and Cooling Equipment | Main Body / Attachments/Accessories | Attachments/Accessories | Main Body | Main Body | Measuring equipment | Attachments/Accessories | Main Body | Measuring equipment | Measuring equipment | Measuring equipment | Measuring equipment | Measuring equipment | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories |
Applicable Manufacturing Machinery (main unit) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Machining Centers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Chuck Type | - | - | - | - | - | - | - | - | - | - | Straight collet | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Holder Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | 76 ~ 91 | 85.5 ~ 109.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Coolant System | - | - | - | - | - | - | - | - | - | - | - | Center Through (Blade Through) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Nozzle Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy