IMAO CORPORATION Bolt Clamps

• 

  Spiral Cam Clamp (CP135)

  IMAO CORPORATION

  [Features]
  · With spiral cam clamp eccentricity, can be quickly and forcefully clamped.
  · Simple and value.
  · Ideal for a variety of workpiece point clamping due to compact design
  · By using with clamp plate, workpieces are not damaged.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Spiral Cam Clamp (Lever Type)

  IMAO CORPORATION

  · The eccentricity of the spiral cam clamp allows quick clamping.
  · Simple and low-cost. The compact design makes it ideal for multiple small workpieces.
  · By using a clamp plate, workpieces are not damaged.

  Days to Ship:	14 Day(s) or more

• 

  Double Edge Clamp (MBDE)

  IMAO CORPORATION

  Simple. Clamp and unclamp power with bolt operation.
  Maximum clamping force. 50kN
  Compact. Simple and compact design
  
  [Features]
  · Tighten with hex head wrench to clamp two pieces in one action.
  · Ideal for handling a variety of workpieces with simple and compact design.

  Days to Ship:	1 Day(s) or more

• 

  Round Fixture Clamp (MBRFC)

  IMAO CORPORATION

  Simple. Clamp and unclamp power with bolt operation.
  Maximum clamping force. 50kN
  Compact. Simple and compact design
  
  [Features]
  · As installation hole is long, clamp adjustment is possible.
  · If the stop screw with hex socket head is tightened, back sliding of the base can be prevented when clamping.

  Days to Ship:	1 Day(s)

• 

  T Nut Slot (S Type)

  IMAO CORPORATION

  [Usage Examples]
  · CLS58CB cam block CLS50FB fixed block (S-type) installation bolt.
  · Use to suit T-slot specification

  Days to Ship:	16 Day(s) or more

• 

  Hold Down Clamp

  IMAO CORPORATION

  [Features]
  · Simple & compact design, ideal for thin material workpieces.
  · With the eccentricity cam quick, powerful clamping with 1/4 turn.
  · Can be selected according to workpiece height.
  · The specially shaped tip divided into 3, and the workpiece is pushed down on both sides with a powerful clamp force to the center, preventing workpiece float.
  [Usage]
  · Hold down clamp is press fitted.
  [Caution]
  · Use hold down clamp in clockwise direction.

  Days to Ship:	18 Day(s)

• 

  Hold Down Stopper (Single Type)

  IMAO CORPORATION

  [Features]
  · Simple & compact design, ideal for thin material workpieces.
  · Can be selected according to workpiece height.
  · The specially shaped tip divided into 3, and the workpiece is pushed down on both sides with a stopper in the center, preventing workpiece float.
  [Usage Examples]
  · When using multiple clamps, use hold-down stopper (single type).

  Days to Ship:	10 Day(s) or more

• 

  Hold Down Clamp (Double Type)

  IMAO CORPORATION

  [Features]
  · Simple & compact design, ideal for thin material workpieces.
  · Can be selected according to workpiece height.
  · The specially shaped tip divided into 3, and the workpiece is pushed down on both sides with a stopper in the center, preventing workpiece float.
  [Usage Examples]
  · Use hold-down stopper (double type) when clamping at 1 point

  Days to Ship:	10 Day(s) or more

• 

  Hold Down Stopper (Swivel Type)

  IMAO CORPORATION

  [Features]
  · Simple & compact design, ideal for thin material workpieces.
  · Can be selected according to workpiece height.
  · The specially shaped tip divided into 3, and the workpiece is pushed down on both sides with a stopper in the center, preventing workpiece float.
  [Usage]
  · When setting the initial workpiece temporary tighten, then after hold-down stopper (swivel type) is tightened in fixing position, tighten clamp pole.

  Days to Ship:	10 Day(s) or more

Loading...