MUROMOTO TEKKO Nippers (Pneumatic Tools)

• 

  (Merry) Air Nippers

  MUROMOTO TEKKO

  [Features]
  ·Cutting and crimping can be performed by changing the blade at any production factory.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  (Merry) Desktop Stripper

  MUROMOTO TEKKO

  [Features]
  · Can strip various wires with a single action.
  · By combining blades, complex layer removal such as 2-step removal is possible.
  [Applications]
  · Removing sheaths of cabtyre, VA wire and multicore wires.

  Days to Ship:	Quote

• 

  Nile Square Model Air Cutters (MSP Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · The main body is a square shape and has many open screw holes for mounting so it is very easy to setup on a machine, etc.
  

  Days to Ship:	14 Day(s) or more

• 

  (Merry) Spare Blade for Air Nippers

  MUROMOTO TEKKO

  [Features]
  · Spare blade for air nippers.
  [Applications]
  · For cutting copper/steel/stainless steel/piano wire/resin, etc.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Nile Sliding Air Cutters (CF Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · Can be used for cutting, crimping, or bending by integrating as a robot tip or in a device.
  · The replacement blade closes after the tip part moves forward 30 mm.
  

  Days to Ship:	14 Day(s) or more

• 

  Nile MP Model Air Cutters (Thin Grip Part Model)

  MUROMOTO TEKKO

  [Features]
  · Booster connected type air cutters.
  · (1) If the MR model power is insufficient.
  (2) If there is an air pressure restriction.
  (3) If the pressure point is more distant than the fulcrum due to a separately prepared replacement blade.
  (4) Optimal for cases of insufficient compressed air as air pressure is regulated.
  · Model with a thin grip part that is easier to handle for those with smaller hands.
  

  Days to Ship:	Quote

• 

  Nile MP Model Air Cutters (Booster Connected Model)

  MUROMOTO TEKKO

  [Features]
  · Booster connected type air cutters.
  · (1) If the MR model power is insufficient.
  (2) If there is an air pressure restriction.
  (3) If the pressure point is more distant than the fulcrum due to a separately prepared replacement blade.
  (4) Optimal for cases of insufficient compressed air as air pressure is regulated.

  Days to Ship:	13 Day(s) or more

• 

  Nile Square Model Air Cutters (MS-G Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · The blade can easily be replaced, even in narrow areas.
  · How the blade opens can be adjusted (MS3G does not include an adjustment bolt for opening the blade).
  

  Days to Ship:	14 Day(s) or more

• 

  Nile Air Nippers For Gate Cutting (ML Model)

  MUROMOTO TEKKO

  [Features]
  · Air nippers for gate cutting.
  · Optimal for simultaneous multiple-location cutting of resin molded products.
  · Moves parallel to the mounting stand.
  · Replacement blades for the standard model air nippers MR model can be used for replacement blades.
  · Please use if cutting abilities of the MER model or ME model are insufficient.
  

  Days to Ship:	14 Day(s) or more

• 

  (Merry) Air Heat Nippers (Square Machine Mountable Type)

  MUROMOTO TEKKO

  [Features]
  ·The square shape makes it easy to attach to machines.
  ·With W heater specifications, the set temperature can be set in a wide range of 70 to 200°C, and the resin gate can be cut at the optimum temperature for the product.
  ·Three types of spare blades are available to support a wide variety of gate cutting.
  [Applications]
  ·Resin molding factory.
  ·For cutting gates of fragile products such as acrylic and resin containing glass.
  ·A transformer (HTR100W) is required when using the main unit.

  Days to Ship:	Quote

• 

  (Merry) Spare Blade for Air Heat Nippers (Square Machine Mountable Type)

  MUROMOTO TEKKO

  [Features]
  · Allows resin cutting work using air heat nippers.
  [Applications]
  · For cutting plastic gates (resin-molded products), etc.

  Days to Ship:	Quote

• 

  (Merry) Air Nipper for Gate Cutter

  MUROMOTO TEKKO

  [Features]
  ·Since it is cut by sliding, the cut end is finished neatly.
  ·Multiple units can be set and multiple pieces can be cut at the same time.
  [Applications]
  ·For simultaneous cutting of resin molded products at multiple locations.

  Days to Ship:	Quote

• 

  (Merry) Spare Blade for Air Scissors

  MUROMOTO TEKKO

  A single-blade move air cutter spare blades.
  Straight blade type.
  Suitable for cutting strips of steel, resin, etc.

  Days to Ship:	1 Day(s)

• 

  Air Nipper (Looseness Prevention Type)

  MUROMOTO TEKKO

  [Features]
  · Main body contains internal bearings.
  · Precision cutting work is possible, and durability of replacement blades has been increased.
  · Replacement blades are tightly sandwiched in, reducing looseness and slippage.
  · 2 air intake ports are provided and can be changed freely to match the mounting position.
  · An adjustment gauge is provided for adjusting blade opening dimensions so they match the workpiece size.
  [Applications]
  · For gate cutting of molded resin products and wire material cutting of electronic/electrical parts, etc.

  Days to Ship:	16 Day(s)

• 

  Nile MR-AH Model Air Cutters

  MUROMOTO TEKKO

  [Features]
  · Terminal retaining type. As wire material is inserted and crimping work is performed after the crimp terminal is lightly retained with the blade crimp part, crimping can be performed with absolute safety.
  · Optimal for crimping work inside of assembly machinery and equipment.
  

  Days to Ship:	Quote

• 

  Nile Round Air Cutters Machine-Mounted Type (Booster Connected Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · Optimal for automating cutting and crimping work.
  · Minute adjustments can be made depending on the product when mounting to a machine.
  · Optimal for the following cases.
  (1) Where the MR-M model has insufficient power
  (2) Where there is a restriction of air pressure
  (3) Where the pressure point is more distant than the fulcrum due to a separately prepared replacement blade
  (4) Insufficient compressed air as air pressure is regulated

  Days to Ship:	14 Day(s) or more

• 

  Nile Round Model Air Cutters (MR-MT Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · One-touch screw pin type, blade replacement can be done easily without any tools.
  Easy to setup on a machine.
  

  Days to Ship:	Quote

• 

  Nile MG Model Air Cutters

  MUROMOTO TEKKO

  [Features]
  · One port method.
  · Small and lightweight air cutters for gate cutting.
  · With turning on of air this comes into close contact with the product, removes all burrs, and cuts the gate.
  · As it is small and lightweight with a low height, it is fit for mounting on an automatic machine (ejector).
  

  Days to Ship:	14 Day(s) or more

• 

  (Merry) Digital Display Transformer for Air Nippers

  MUROMOTO TEKKO

  [Features]
  ·Depending on the temperature setting, the resin gate can be cut at the optimum temperature, resulting in a clean finish.
  ·You can check and set the temperature of the heater on the digital display.
  ·Depending on the temperature setting, the resin gate can be cut at the optimum temperature, resulting in a clean finish.
  [Applications]
  ·Checking and setting the temperature of the heater section.
  ·When using this machine, an air heat nipper body (AH20 or AH30) is required.

  Days to Ship:	Quote

• 

  (Merry) Sliding Air Nippers (Pull Type)

  MUROMOTO TEKKO

  [Features]
  · The slide part is a U-shaped guide rail that brings rattling down to a minimum.
  · Adjustable blade opening functions are included, supporting work with greater accuracy. (Excluding SN1)
  · For machine mounting.
  [Applications]
  · For resin molding.
  · Ejector manufacturer / Set manufacturer.
  · For ABS resin.

  Days to Ship:	Quote

• 

  (Merry) Air Nippers (Square Machine Mountable Type)

  MUROMOTO TEKKO

  [Features]
  ·The main body is square and has many mounting holes, making it easy to set up on machines.
  [Applications]
  ·Attached to an automatic machine for cutting, caulking, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  (Merry) Plate Shears

  MUROMOTO TEKKO

  [Features]
  ·The cut ends are clean because there is no distortion.
  [Applications]
  ·For cutting iron plates, copper plates, brass plates, wire nets, rubber plates, resin plates, carpets, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  (Merry) Spare Blade for PSH-05

  MUROMOTO TEKKO

  A spare blade dedicated for plate shears.
  Suitable for cutting steel plates, carpets, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  (Merry) Air Scissors

  MUROMOTO TEKKO

  [Features]
  · One-shot type lever operated scissors, which operate once when the lever is pushed.
  [Applications]
  · For cutting of belt-shaped thin metal and resin plates.

  Days to Ship:	1 Day(s)

• 

  (Merry) Multi-Purpose Scissors (Front Exhaust Type)

  MUROMOTO TEKKO

  [Features]
  · Small, lightweight, and ideal for cutting soft materials.
  · There are 2 types of HSS replacement blades (10M and 10MC).
  [Applications]
  · Thin rubber, vinyl, and other soft material cutting and burr removal.

  Days to Ship:	16 Day(s)

• 

  (Merry) Spare Blade for Multi-Purpose Scissors (Front Exhaust Type)

  MUROMOTO TEKKO

  [Features]
  · Replacement blade for GS01.
  · Features outstanding durability as it is made of HSS.
  · Sashimi knife type.
  [Applications]
  · Replacement blade for GS01.
  · Ideal for burr cutting.

  Days to Ship:	12 Day(s)

• 

  Nile MR Type Air Cutters

  MUROMOTO TEKKO

  [Features]
  · Standard type, can be used in a wide range of applications.
  · Blade replacement makes this optimal for work in cutting, crimping, bending, hole punching, caulking, crushing, etc.
  · Ingenious blade replacement will save labor with various types of work.
  

  Days to Ship:	14 Day(s) or more

• 

  Nile CP Model Air Cutters (CP-M Model)

  MUROMOTO TEKKO

  [Features]
  · CP model air cutters that are mounted on a machine.
  · Type where only a single side of the replaceable blades moves.

  Days to Ship:	14 Day(s) or more

• 

  Nile Round Model Air Cutters (MR-MG Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · One-touch screw pin type, blade replacement can be done easily without any tools.

  Days to Ship:	Quote

• 

  Nile Round Model Air Cutters (MP-MG Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · One-touch screw pin type, blade replacement can be done easily without any tools.
  

  Days to Ship:	Quote

• 

  Nile Square Model Air Cutters (MS Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · The main body is a square shape and has many open screw holes for mounting so it is very easy to setup on a machine, etc.
  

  Days to Ship:	16 Day(s) or more

• 

  Nile Square Model Air Cutters (MSK Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · The main body is a square shape and has many open screw holes for mounting so it is very easy to setup on a machine, etc.
  · As the tip is round and narrow, it is now easier to use it in narrow places.
  

  Days to Ship:	14 Day(s) or more

• 

  Nile MS-V Model Air Cutters

  MUROMOTO TEKKO

  [Features]
  · Double-action type.
  · With the use of a four-way solenoid valve, it has a fast response speed, and is especially recommended for being integrated in robots, machines, etc.
  

  Days to Ship:	11 Day(s) or more

• 

  Nile WS Model Air Cutters

  MUROMOTO TEKKO

  [Features]
  · Double-action / machine-mounted type.
  · Neither the main body nor blade use a return spring eliminating trouble with spring breaking (especially the blade).
  · Blade can be replaced easily without any tools.
  · How the blade opens can be adjusted (WS3 does not include an adjustment bolt for opening the blade).
  

  Days to Ship:	Quote

• 

  Nile Square Model Air Cutters (MSP-G Model)

  MUROMOTO TEKKO

  [Features]
  · Machine-mounted type.
  · The blade can easily be replaced, even in narrow areas.
  · How the blade opens can be adjusted (MSP3G does not include an adjustment bolt for opening the blade).
  

  Days to Ship:	14 Day(s) or more

• 

  Nile AS Model Air Scissors

  MUROMOTO TEKKO

  [Features]
  · Single-action shears.
  [Applications]
  · For cutting steel plates, steel bands, plastic sheets, etc.
  

  Days to Ship:	14 Day(s) or more

• 

  Nile Square Model Air Shears (AM Model)

  MUROMOTO TEKKO

  [Features]
  · Integrate into and use in machines, etc.
  · The main body is in a square shape with many screw holes for mounting.
  

  Days to Ship:	14 Day(s) or more

• 

  Nile Air Multi-Purpose Scissors (Rear Exhaust Type)

  MUROMOTO TEKKO

  [Features]
  · Optimal for cutting burrs on relatively thin rubber and vinyl, etc.
  · The main body is compact, suitable for anyone to use.
  

  Days to Ship:	Quote

• 

  Nile WK10 Model Electrical Wire Cutters

  MUROMOTO TEKKO

  [Features]
  · Use of various replacement blades enables performing various types of cutting work, such as cabtyre cutting, copper plate cutting, nylon tube cutting, etc.
  · Includes safety cover.
  

  Days to Ship:	Quote

• 

  Nile Square Model Air Heat Cutters

  MUROMOTO TEKKO

  [Features]
  · Special type for cutting hard resin.
  · Cutting is performed by heating the blade tip with a heater so it can be used for cutting hard resins like acrylic, etc.
  

  Days to Ship:	Quote

• 

  Nile Cable Strippers (CST35)

  MUROMOTO TEKKO

  [Features]
  Cabtyre, VA and multi-core wires can be stripped with one touch.
  

  Days to Ship:	15 Day(s) or more

• 

  Nile Cable Strippers (CST100H95)

  MUROMOTO TEKKO

  [Features]
  Cabtyre, VA and multi-core wires can be stripped with one touch.
  

  Days to Ship:	Quote

• 

  Nile Cable Strippers (CST100L)

  MUROMOTO TEKKO

  [Features]
  Cabtyre, VA and multi-core wires can be stripped with one touch.
  

  Days to Ship:	Quote

Loading...